uodate 2.0.x

Marlin/src/gcode/feature/trinamic/M122.cpp

@@ -43,10 +43,13 @@ void GcodeSuite::M122() {
 
   #if ENABLED(TMC_DEBUG)
     #if ENABLED(MONITOR_DRIVER_STATUS)
-      uint16_t interval = MONITOR_DRIVER_STATUS_INTERVAL_MS;
-      if (parser.seen('S') && !parser.value_bool()) interval = 0;
-      if (parser.seenval('P')) NOMORE(interval, parser.value_ushort());
-      tmc_set_report_interval(interval);
+      const bool sflag = parser.seen_test('S'), sval = sflag && parser.value_bool();
+      if (sflag && !sval)
+        tmc_set_report_interval(0);
+      else if (parser.seenval('P'))
+        tmc_set_report_interval(_MAX(250, parser.value_ushort()));
+      else if (sval)
+        tmc_set_report_interval(MONITOR_DRIVER_STATUS_INTERVAL_MS);
     #endif
 
     if (parser.seen_test('V'))

Marlin/src/inc/SanityCheck.h

@@ -1379,6 +1379,12 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 #if LINEAR_AXES >= 4
   #if AXIS4_NAME != 'A' && AXIS4_NAME != 'B' && AXIS4_NAME != 'C' && AXIS4_NAME != 'U' && AXIS4_NAME != 'V' && AXIS4_NAME != 'W'
     #error "AXIS4_NAME can only be one of 'A', 'B', 'C', 'U', 'V', or 'W'."
+  #elif !defined(I_MIN_POS) || !defined(I_MAX_POS)
+    #error "I_MIN_POS and I_MAX_POS are required with LINEAR_AXES >= 4."
+  #elif !defined(I_HOME_DIR)
+    #error "I_HOME_DIR is required with LINEAR_AXES >= 4."
+  #elif HAS_I_ENABLE && !defined(I_ENABLE_ON)
+    #error "I_ENABLE_ON is required for your I driver with LINEAR_AXES >= 4."
   #endif
 #endif
 #if LINEAR_AXES >= 5
@@ -1386,6 +1392,12 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
     #error "AXIS5_NAME must be different from AXIS4_NAME and AXIS6_NAME"
   #elif AXIS5_NAME != 'A' && AXIS5_NAME != 'B' && AXIS5_NAME != 'C' && AXIS5_NAME != 'U' && AXIS5_NAME != 'V' && AXIS5_NAME != 'W'
     #error "AXIS5_NAME can only be one of 'A', 'B', 'C', 'U', 'V', or 'W'."
+  #elif !defined(J_MIN_POS) || !defined(J_MAX_POS)
+    #error "J_MIN_POS and J_MAX_POS are required with LINEAR_AXES >= 5."
+  #elif !defined(J_HOME_DIR)
+    #error "J_HOME_DIR is required with LINEAR_AXES >= 5."
+  #elif HAS_J_ENABLE && !defined(J_ENABLE_ON)
+    #error "J_ENABLE_ON is required for your J driver with LINEAR_AXES >= 5."
   #endif
 #endif
 #if LINEAR_AXES >= 6
@@ -1393,6 +1405,12 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
     #error "AXIS6_NAME must be different from AXIS5_NAME and AXIS4_NAME."
   #elif AXIS6_NAME != 'A' && AXIS6_NAME != 'B' && AXIS6_NAME != 'C' && AXIS6_NAME != 'U' && AXIS6_NAME != 'V' && AXIS6_NAME != 'W'
     #error "AXIS6_NAME can only be one of 'A', 'B', 'C', 'U', 'V', or 'W'."
+  #elif !defined(K_MIN_POS) || !defined(K_MAX_POS)
+    #error "K_MIN_POS and K_MAX_POS are required with LINEAR_AXES >= 6."
+  #elif !defined(K_HOME_DIR)
+    #error "K_HOME_DIR is required with LINEAR_AXES >= 6."
+  #elif HAS_K_ENABLE && !defined(K_ENABLE_ON)
+    #error "K_ENABLE_ON is required for your K driver with LINEAR_AXES >= 6."
   #endif
 #endif
 

Marlin/src/module/planner.cpp

@@ -1877,6 +1877,15 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
       " A:", target.a, " (", da, " steps)"
       " B:", target.b, " (", db, " steps)"
       " C:", target.c, " (", dc, " steps)"
+      #if LINEAR_AXES >= 4
+        " " AXIS4_STR ":", target.i, " (", di, " steps)"
+      #endif
+      #if LINEAR_AXES >= 5
+        " " AXIS5_STR ":", target.j, " (", dj, " steps)"
+      #endif
+      #if LINEAR_AXES >= 6
+        " " AXIS6_STR ":", target.k, " (", dk, " steps)"
+      #endif
       #if HAS_EXTRUDERS
         " E:", target.e, " (", de, " steps)"
       #endif
@@ -1953,6 +1962,19 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
       if (dk < 0) SBI(dm, K_AXIS)
     );
   #endif
+
+  #if IS_CORE
+    #if LINEAR_AXES >= 4
+      if (di < 0) SBI(dm, I_AXIS);
+    #endif
+    #if LINEAR_AXES >= 5
+      if (dj < 0) SBI(dm, J_AXIS);
+    #endif
+    #if LINEAR_AXES >= 6
+      if (dk < 0) SBI(dm, K_AXIS);
+    #endif
+  #endif
+
   #if HAS_EXTRUDERS
     if (de < 0) SBI(dm, E_AXIS);
   #endif
@@ -2004,7 +2026,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
    */
   struct DistanceMM : abce_float_t {
     #if EITHER(IS_CORE, MARKFORGED_XY)
-      xyz_pos_t head;
+      struct { float x, y, z; } head;
     #endif
   } steps_dist_mm;
   #if IS_CORE
@@ -2027,6 +2049,15 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
       steps_dist_mm.b      = (db + dc) * steps_to_mm[B_AXIS];
       steps_dist_mm.c      = CORESIGN(db - dc) * steps_to_mm[C_AXIS];
     #endif
+    #if LINEAR_AXES >= 4
+      steps_dist_mm.i = di * steps_to_mm[I_AXIS];
+    #endif
+    #if LINEAR_AXES >= 5
+      steps_dist_mm.j = dj * steps_to_mm[J_AXIS];
+    #endif
+    #if LINEAR_AXES >= 6
+      steps_dist_mm.k = dk * steps_to_mm[K_AXIS];
+    #endif
   #elif ENABLED(MARKFORGED_XY)
     steps_dist_mm.head.x = da * steps_to_mm[A_AXIS];
     steps_dist_mm.head.y = db * steps_to_mm[B_AXIS];

Marlin/src/sd/cardreader.cpp

@@ -1248,7 +1248,7 @@ void CardReader::cdroot() {
         #if ENABLED(SDSORT_USES_RAM) && DISABLED(SDSORT_CACHE_NAMES)
           #if ENABLED(SDSORT_DYNAMIC_RAM)
             for (uint16_t i = 0; i < fileCnt; ++i) free(sortnames[i]);
-            TERN_(HAS_FOLDER_SORTING, free(isDir));
+            TERN_(HAS_FOLDER_SORTING, delete [] isDir);
           #endif
         #endif
       }
@@ -1274,14 +1274,14 @@ void CardReader::cdroot() {
   void CardReader::flush_presort() {
     if (sort_count > 0) {
       #if ENABLED(SDSORT_DYNAMIC_RAM)
-        delete sort_order;
+        delete [] sort_order;
         #if ENABLED(SDSORT_CACHE_NAMES)
           LOOP_L_N(i, sort_count) {
             free(sortshort[i]); // strdup
             free(sortnames[i]); // strdup
           }
-          delete sortshort;
-          delete sortnames;
+          delete [] sortshort;
+          delete [] sortnames;
         #endif
       #endif
       sort_count = 0;