@ -5,10 +5,11 @@
// 1 Custom (For you to add your own messages)
// 2 English
// 3 French (Waiting translation)
// 4 German
// 5 Etc
// 4 German (Waiting translation)
// 5 Spanish
// 6 Etc
# define LANGUAGE_CHOICE 1 // Pick your language from the list above
# define LANGUAGE_CHOICE 5 // Pick your language from the list above
# define PROTOCOL_VERSION "1.0"
@ -36,7 +37,6 @@
# define MSG_SET_ORIGIN " Set Origin"
# define MSG_COOLDOWN " Cooldown"
# define MSG_EXTRUDE " Extrude"
# define MSG_RETRACT" Retract"
# define MSG_PREHEAT_PLA " Preheat PLA"
# define MSG_PREHEAT_ABS " Preheat ABS"
# define MSG_MOVE_AXIS " Move Axis \x7E"
@ -87,8 +87,6 @@
# define MSG_CONTROL_ARROW " Control \x7E"
# define MSG_RETRACT_ARROW " Control \x7E"
# define MSG_TUNE " Tune \x7E"
# define MSG_PAUSE_PRINT " Pause Print \x7E"
# define MSG_RESUME_PRINT " Resume Print \x7E"
# define MSG_STOP_PRINT " Stop Print \x7E"
# define MSG_CARD_MENU " Card Menu \x7E"
# define MSG_NO_CARD " No Card"
@ -99,13 +97,15 @@
# define MSG_PART_RELEASE "Partial Release"
# define MSG_KILLED "KILLED. "
# define MSG_STOPPED "STOPPED. "
# define MSG_PREHEAT_PLA " Preheat PLA"
# define MSG_PREHEAT_ABS " Preheat ABS"
# define MSG_STEPPER_RELEASED "Released."
# define MSG_CONTROL_RETRACT " Retract mm:"
# define MSG_CONTROL_RETRACTF " Retract F:"
# define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:"
# define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
# define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
# define MSG_AUTORETRACT " AutoRetr.:"
# define MSG_CONTROL_RETRACT " Retract mm:"
# define MSG_CONTROL_RETRACTF " Retract F:"
# define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:"
# define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
# define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
# define MSG_AUTORETRACT " AutoRetr.:"
// Serial Console Messages
@ -177,25 +177,30 @@
# if LANGUAGE_CHOICE == 4
// LCD Menu Messages
# define WELCOME_MSG MACHINE_NAME " Bereit."
# define MSG_SD_INSERTED "Karte eingelegt"
# define MSG_SD_REMOVED "Karte entfernt"
# define MSG_MAIN " Haupt \003"
# define WELCOME_MSG MACHINE_NAME " Ready."
# define MSG_SD_INSERTED "Card inserted"
# define MSG_SD_REMOVED "Card removed"
# define MSG_MAIN " Main \003"
# define MSG_AUTOSTART " Autostart"
# define MSG_DISABLE_STEPPERS " Motoren abschalten"
# define MSG_DISABLE_STEPPERS " Stepper abschalten"
# define MSG_AUTO_HOME " Auto Heim"
# define MSG_SET_ORIGIN " Position setzen"
# define MSG_COOLDOWN " Abkuehlen"
# define MSG_EXTRUDE " Druck"
# define MSG_PREHEAT_PLA " Aufheizen PLA"
# define MSG_PREHEAT_ABS " Aufheizen ABS"
# define MSG_MOVE_AXIS " Achse bewegen \x7E"
# define MSG_COOLDOWN " Abkuehlen"
# define MSG_EXTRUDE " Extrude"
# define MSG_PREHEAT_PLA " Preheat PLA"
# define MSG_PREHEAT_ABS " Preheat ABS"
# define MSG_MOVE_AXIS " Move Axis \x7E"
# define MSG_MOVE_AXIS " Achsen verfahren \x7E"
# define MSG_SPEED " Geschw:"
# define MSG_NOZZLE " \002Duese:"
# define MSG_NOZZLE1 " \002Duese2:"
# define MSG_NOZZLE2 " \002Duese3:"
# define MSG_BED " \002Bett:"
# define MSG_FAN_SPEED " Luefter G eschw.:"
# define MSG_FAN_SPEED " Luefter g eschw.:"
# define MSG_FLOW " Fluss:"
# define MSG_CONTROL " Kontrolle \003"
# define MSG_MIN " \002 Min:"
@ -218,42 +223,38 @@
# define MSG_VMIN " Vmin:"
# define MSG_VTRAV_MIN " VTrav min:"
# define MSG_AMAX " Amax "
# define MSG_A_RETRACT " A-Rueckzug :"
# define MSG_A_RETRACT " A-retract :"
# define MSG_XSTEPS " Xsteps / mm:"
# define MSG_YSTEPS " Ysteps / mm:"
# define MSG_ZSTEPS " Zsteps / mm:"
# define MSG_ESTEPS " Esteps / mm:"
# define MSG_MAIN_WIDE " Hauptmenue \003"
# define MSG_RECTRACT_WIDE " Rueckzug \x7E"
# define MSG_MAIN_WIDE " Main \003"
# define MSG_TEMPERATURE_WIDE " Temperatur \x7E"
# define MSG_MOTION_WIDE " Bewegung \x7E"
# define MSG_MOTION_WIDE " Motion \x7E"
# define MSG_STORE_EPROM " EPROM speichern"
# define MSG_LOAD_EPROM " EPROM laden"
# define MSG_RESTORE_FAILSAFE " Standard Konfig."
# define MSG_REFRESH "\004Aktualisieren "
# define MSG_REFRESH "\004Refresh "
# define MSG_WATCH " Beobachten \003"
# define MSG_PREPARE " Vorbereiten \x7E"
# define MSG_PREPARE_ALT " Vorbereiten \003"
# define MSG_CONTROL_ARROW " Kontrolle \x7E"
# define MSG_RETRACT_ARROW " Control \x7E"
# define MSG_PREPARE " Prepare \x7E"
# define MSG_PREPARE_ALT " Prepare \003"
# define MSG_CONTROL_ARROW " Control \x7E"
# define MSG_TUNE " Tune \x7E"
# define MSG_STOP_PRINT " Druck stoppen \x7E"
# define MSG_CARD_MENU " SDKarten Menue \x7E"
# define MSG_NO_CARD " Keine SDKarte"
# define MSG_SERIAL_ERROR_MENU_STRUCTURE "Fehler in der Menuestruktur."
# define MSG_DWELL "verweilen..."
# define MSG_USERWAIT "Warten auf Nutzer..."
# define MSG_NO_MOVE "Keine Bewegung."
# define MSG_PART_RELEASE "Teil loesen"
# define MSG_KILLED "GEKILLT. "
# define MSG_STOPPED "GESTOPPT. "
# define MSG_STEPPER_RELEASED "Freigegeben."
# define MSG_CONTROL_RETRACT " Rueckzug mm:"
# define MSG_CONTROL_RETRACTF " Rueckzug F:"
# define MSG_CONTROL_RETRACT_ZLIFT " Z Sprung mm:"
# define MSG_CONTROL_RETRACT_RECOVER " Vorschub +mm:"
# define MSG_CONTROL_RETRACT_RECOVERF " Vorschub F:"
# define MSG_AUTORETRACT " AutoRueckzug.:"
# define MSG_DWELL "DWELL..."
# define MSG_NO_MOVE "No move."
# define MSG_PART_RELEASE "Partial Release"
# define MSG_KILLED "KILLED. "
# define MSG_STOPPED "STOPPED. "
# define MSG_PREHEAT_PLA " Preheat PLA"
# define MSG_PREHEAT_ABS " Preheat ABS"
# define MSG_STEPPER_RELEASED "Released."
// Serial Console Messages
@ -300,26 +301,177 @@
# define MSG_Z_MIN "z_min:"
# define MSG_Z_MAX "z_max:"
# define MSG_SD_CANT_OPEN_SUBDIR "Verz. kein Zugriff"
# define MSG_SD_INIT_FAIL "SD init Fehler"
# define MSG_SD_VOL_INIT_FAIL "volume.init Fehler"
# define MSG_SD_OPENROOT_FAIL "openRoot Fehler"
# define MSG_SD_CARD_OK "SDKarte ok"
# define MSG_SD_WORKDIR_FAIL "workDir Oeffnen Fehler"
# define MSG_SD_OPEN_FILE_FAIL "Fehler: Oeffnen Datei: "
# define MSG_SD_FILE_OPENED "Datei geoeffnet:"
# define MSG_SD_SIZE " Groesse:"
# define MSG_SD_FILE_SELECTED "Datei selektiert"
# define MSG_SD_WRITE_TO_FILE "Schreibe in Datei: "
# define MSG_SD_PRINTING_BYTE "SD druckt byte "
# define MSG_SD_NOT_PRINTING "Druckt nicht von SD"
# define MSG_SD_ERR_WRITE_TO_FILE "Datei Schreibfehler"
# define MSG_SD_CANT_ENTER_SUBDIR "Kann Verz. nicht wechseln:"
# define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
# define MSG_SD_INIT_FAIL "SD init fail"
# define MSG_SD_VOL_INIT_FAIL "volume.init failed"
# define MSG_SD_OPENROOT_FAIL "openRoot failed"
# define MSG_SD_CARD_OK "SD card ok"
# define MSG_SD_WORKDIR_FAIL "workDir open failed"
# define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
# define MSG_SD_FILE_OPENED "File opened:"
# define MSG_SD_SIZE " Size:"
# define MSG_SD_FILE_SELECTED "File selected"
# define MSG_SD_WRITE_TO_FILE "Writing to file: "
# define MSG_SD_PRINTING_BYTE "SD printing byte "
# define MSG_SD_NOT_PRINTING "Not SD printing"
# define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
# define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"
# define MSG_STEPPER_TO_HIGH "Steprate to high : "
# define MSG_ENDSTOPS_HIT "endstops hit: "
# define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
# define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
# endif
# if LANGUAGE_CHOICE == 5
// LCD Menu Messages
# define WELCOME_MSG MACHINE_NAME " Lista."
# define MSG_SD_INSERTED "Tarjeta SD Colocada"
# define MSG_SD_REMOVED "Tarjeta SD Retirada"
# define MSG_MAIN " Menu Principal \003"
# define MSG_AUTOSTART " Autostart"
# define MSG_DISABLE_STEPPERS " Apagar Motores"
# define MSG_AUTO_HOME " Llevar Ejes al Cero"
# define MSG_SET_ORIGIN " Establecer Cero"
# define MSG_COOLDOWN " Enfriar"
# define MSG_EXTRUDE " Extruir"
# define MSG_PREHEAT_PLA " Precalentar PLA"
# define MSG_PREHEAT_ABS " Precalentar ABS"
# define MSG_MOVE_AXIS " Mover Ejes \x7E"
# define MSG_SPEED " Velocidad:"
# define MSG_NOZZLE " \002Nozzle:"
# define MSG_NOZZLE1 " \002Nozzle2:"
# define MSG_NOZZLE2 " \002Nozzle3:"
# define MSG_BED " \002Bed:"
# define MSG_FAN_SPEED " Ventilador:"
# define MSG_FLOW " Flujo:"
# define MSG_CONTROL " Control \003"
# define MSG_MIN " \002 Min:"
# define MSG_MAX " \002 Max:"
# define MSG_FACTOR " \002 Fact:"
# define MSG_AUTOTEMP " Autotemp:"
# define MSG_ON "On "
# define MSG_OFF "Off"
# define MSG_PID_P " PID-P: "
# define MSG_PID_I " PID-I: "
# define MSG_PID_D " PID-D: "
# define MSG_PID_C " PID-C: "
# define MSG_ACC " Acc:"
# define MSG_VXY_JERK " Vxy-jerk: "
# define MSG_VMAX " Vmax "
# define MSG_X "x:"
# define MSG_Y "y:"
# define MSG_Z "z:"
# define MSG_E "e:"
# define MSG_VMIN " Vmin:"
# define MSG_VTRAV_MIN " VTrav min:"
# define MSG_AMAX " Amax "
# define MSG_A_RETRACT " A-retrac.:"
# define MSG_XSTEPS " Xpasos / mm:"
# define MSG_YSTEPS " Ypasos / mm:"
# define MSG_ZSTEPS " Zpasos / mm:"
# define MSG_ESTEPS " Epasos / mm:"
# define MSG_MAIN_WIDE " Menu Principal \003"
# define MSG_RECTRACT_WIDE " Retraer \x7E"
# define MSG_TEMPERATURE_WIDE " Temperatura \x7E"
# define MSG_MOTION_WIDE " Movimiento \x7E"
# define MSG_STORE_EPROM " Guardar Memoria"
# define MSG_LOAD_EPROM " Cargar Memoria"
# define MSG_RESTORE_FAILSAFE " Rest. de emergencia"
# define MSG_REFRESH "\004Volver a cargar"
# define MSG_WATCH " Monitorizar \003"
# define MSG_PREPARE " Preparar \x7E"
# define MSG_PREPARE_ALT " Preparar \003"
# define MSG_CONTROL_ARROW " Control \x7E"
# define MSG_RETRACT_ARROW " Control \x7E"
# define MSG_TUNE " Ajustar \x7E"
# define MSG_STOP_PRINT " Detener Impresion \x7E"
# define MSG_CARD_MENU " Menu de SD \x7E"
# define MSG_NO_CARD " No hay Tarjeta SD"
# define MSG_SERIAL_ERROR_MENU_STRUCTURE "Hay un error en la estructura del menu"
# define MSG_DWELL "Reposo..."
# define MSG_USERWAIT "Esperando Ordenes..."
# define MSG_NO_MOVE "Sin movimiento"
# define MSG_PART_RELEASE "Desacople Parcial"
# define MSG_KILLED "PARADA DE EMERGENCIA. "
# define MSG_STOPPED "PARADA. "
# define MSG_PREHEAT_PLA " Precalentar PLA"
# define MSG_PREHEAT_ABS " Precalentar ABS"
# define MSG_STEPPER_RELEASED "Desacoplada."
# define MSG_CONTROL_RETRACT " Retraer mm:"
# define MSG_CONTROL_RETRACTF " Retraer F:"
# define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
# define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
# define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:"
# define MSG_AUTORETRACT " AutoRetr.:"
// Serial Console Messages
# define MSG_Enqueing "En cola \""
# define MSG_POWERUP "PowerUp"
# define MSG_EXTERNAL_RESET " Reset Externo"
# define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto"
# define MSG_WATCHDOG_RESET " Reset por Bloqueo"
# define MSG_SOFTWARE_RESET " Reset por Software"
# define MSG_MARLIN "Marlin "
# define MSG_AUTHOR " | Autor: "
# define MSG_CONFIGURATION_VER " Ultima actualizacion: "
# define MSG_FREE_MEMORY " Memoria libre: "
# define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
# define MSG_OK "ok"
# define MSG_FILE_SAVED "Guardado."
# define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:"
# define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:"
# define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:"
# define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:"
# define MSG_FILE_PRINTED "Impresion terminado"
# define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos"
# define MSG_END_FILE_LIST "Fin de la lista de archivos"
# define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido "
# define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido "
# define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp"
# define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido "
# define MSG_HEATING "Calientando..."
# define MSG_HEATING_COMPLETE "Calentamiento terminado."
# define MSG_BED_HEATING "Calentando la base."
# define MSG_BED_DONE "Base Caliente."
# define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter / grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
# define MSG_COUNT_X " Cuenta X:"
# define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!"
# define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)"
# define MSG_RESEND "Reenviar:"
# define MSG_UNKNOWN_COMMAND "Comando Desconocido:\""
# define MSG_ACTIVE_EXTRUDER "Extrusor Activo: "
# define MSG_INVALID_EXTRUDER "Extrusor Invalido"
# define MSG_X_MIN "x_min:"
# define MSG_X_MAX "x_max:"
# define MSG_Y_MIN "y_min:"
# define MSG_Y_MAX "y_max:"
# define MSG_Z_MIN "z_min:"
# define MSG_Z_MAX "z_max:"
# define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta."
# define MSG_SD_INIT_FAIL "Fallo al iniciar la SD"
# define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen"
# define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz"
# define MSG_SD_CARD_OK "Tarjeta SD OK"
# define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo"
# define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: "
# define MSG_SD_FILE_OPENED "Archivo abierto:"
# define MSG_SD_SIZE " Tamaño:"
# define MSG_SD_FILE_SELECTED "Archivo Seleccionado"
# define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: "
# define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte "
# define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD"
# define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo"
# define MSG_SD_CANT_ENTER_SUBDIR "No se puede entrar en la carpeta:"
# define MSG_STEPPER_TO_HIGH "Steprate zu hoch : "
# define MSG_ENDSTOPS_HIT "Endstop erreicht: "
# define MSG_ERR_COLD_EXTRUDE_STOP " kalter Druck unterbunden"
# define MSG_ERR_LONG_EXTRUDE_STOP " langer Druckweg unterbunden"
# define MSG_STEPPER_TO_HIGH "Steprate demasiado alto : "
# define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril : "
# define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada "
# define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada "
# endif
# endif // ifndef LANGUAGE_H
# endif // ifndef LANGUAGE_H
elgambitero
12 years ago