Browse Source

Tweaks to HAL format and order

pull/1/head
Scott Lahteine 6 years ago
parent
commit
ad21a4f07b
  1. 78
      Marlin/src/HAL/HAL_DUE/HAL.h
  2. 31
      Marlin/src/HAL/HAL_LPC1768/HAL.h
  3. 2
      Marlin/src/HAL/HAL_STM32F1/HAL.h

78
Marlin/src/HAL/HAL_DUE/HAL.h

@ -41,26 +41,13 @@
#include "watchdog_Due.h"
#include "HAL_timers_Due.h"
//
// Defines
//
#define NUM_SERIAL 1
// Required before the include or compilation fails
#define MYSERIAL0 customizedSerial
// We need the previous define before the include, or compilation bombs...
#include "MarlinSerial_Due.h"
#include "MarlinSerialUSB_Due.h"
#ifndef analogInputToDigitalPin
#define analogInputToDigitalPin(p) ((p < 12u) ? (p) + 54u : -1)
#endif
#define CRITICAL_SECTION_START uint32_t primask = __get_PRIMASK(); __disable_irq()
#define CRITICAL_SECTION_END if (!primask) __enable_irq()
#define ISRS_ENABLED() (!__get_PRIMASK())
#define ENABLE_ISRS() __enable_irq()
#define DISABLE_ISRS() __disable_irq()
// On AVR this is in math.h?
#define square(x) ((x)*(x))
@ -86,19 +73,18 @@
#define RST_SOFTWARE 32
#define RST_BACKUP 64
// --------------------------------------------------------------------------
// Types
// --------------------------------------------------------------------------
typedef int8_t pin_t;
#define HAL_SERVO_LIB Servo
// --------------------------------------------------------------------------
// Public Variables
// --------------------------------------------------------------------------
extern uint16_t HAL_adc_result; // result of last ADC conversion
//
// Interrupts
//
#define CRITICAL_SECTION_START uint32_t primask = __get_PRIMASK(); __disable_irq()
#define CRITICAL_SECTION_END if (!primask) __enable_irq()
#define ISRS_ENABLED() (!__get_PRIMASK())
#define ENABLE_ISRS() __enable_irq()
#define DISABLE_ISRS() __disable_irq()
void cli(void); // Disable interrupts
void sei(void); // Enable interrupts
@ -106,13 +92,9 @@ void sei(void); // Enable interrupts
void HAL_clear_reset_source(void); // clear reset reason
uint8_t HAL_get_reset_source(void); // get reset reason
void _delay_ms(const int delay);
int freeMemory(void);
/**
* SPI: Extended functions taking a channel number (hardware SPI only)
*/
//
// SPI: Extended functions taking a channel number (Hardware SPI only)
//
// Write single byte to specified SPI channel
void spiSend(uint32_t chan, byte b);
@ -123,18 +105,22 @@ void spiSend(uint32_t chan, const uint8_t* buf, size_t n);
// Read single byte from specified SPI channel
uint8_t spiRec(uint32_t chan);
/**
* EEPROM
*/
//
// EEPROM
//
void eeprom_write_byte(unsigned char *pos, unsigned char value);
unsigned char eeprom_read_byte(unsigned char *pos);
void eeprom_read_block (void *__dst, const void *__src, size_t __n);
void eeprom_update_block (const void *__src, void *__dst, size_t __n);
/**
* ADC
*/
//
// ADC
//
extern uint16_t HAL_adc_result; // result of last ADC conversion
#ifndef analogInputToDigitalPin
#define analogInputToDigitalPin(p) ((p < 12u) ? (p) + 54u : -1)
#endif
#define HAL_ANALOG_SELECT(pin)
@ -154,16 +140,16 @@ uint16_t HAL_getAdcFreerun(uint8_t chan, bool wait_for_conversion = false);
void HAL_enable_AdcFreerun(void);
//void HAL_disable_AdcFreerun(uint8_t chan);
/**
* Pin Map
*/
//
// Pin Map
//
#define GET_PIN_MAP_PIN(index) index
#define GET_PIN_MAP_INDEX(pin) pin
#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
/**
* Tone
*/
//
// Tone
//
void toneInit();
void tone(const pin_t _pin, const unsigned int frequency, const unsigned long duration=0);
void noTone(const pin_t _pin);
@ -174,6 +160,12 @@ void noTone(const pin_t _pin);
void HAL_idletask(void);
void HAL_init(void);
//
// Utility functions
//
void _delay_ms(const int delay);
int freeMemory(void);
#ifdef __cplusplus
extern "C" {
#endif

31
Marlin/src/HAL/HAL_LPC1768/HAL.h

@ -64,10 +64,11 @@ extern "C" volatile uint32_t _millis;
#include "../shared/HAL_SPI.h"
#include "fastio.h"
#include "watchdog.h"
#include "serial.h"
#include "HAL_timers.h"
#include "HardwareSerial.h"
//
// Default graphical display delays
//
#ifndef ST7920_DELAY_1
#define ST7920_DELAY_1 DELAY_NS(600)
#endif
@ -78,6 +79,12 @@ extern "C" volatile uint32_t _millis;
#define ST7920_DELAY_3 DELAY_NS(750)
#endif
//
// Arduino-style serial ports
//
#include "serial.h"
#include "HardwareSerial.h"
extern HalSerial usb_serial;
#if !WITHIN(SERIAL_PORT, -1, 3)
@ -126,24 +133,34 @@ extern HalSerial usb_serial;
#define NUM_SERIAL 1
#endif
//
// Interrupts
//
#define CRITICAL_SECTION_START uint32_t primask = __get_PRIMASK(); __disable_irq()
#define CRITICAL_SECTION_END if (!primask) __enable_irq()
#define ISRS_ENABLED() (!__get_PRIMASK())
#define ENABLE_ISRS() __enable_irq()
#define DISABLE_ISRS() __disable_irq()
//Utility functions
//
// Utility functions
//
int freeMemory(void);
// SPI: Extended functions which take a channel number (hardware SPI only)
/** Write single byte to specified SPI channel */
//
// SPI: Extended functions taking a channel number (Hardware SPI only)
//
// Write single byte to specified SPI channel
void spiSend(uint32_t chan, byte b);
/** Write buffer to specified SPI channel */
// Write buffer to specified SPI channel
void spiSend(uint32_t chan, const uint8_t* buf, size_t n);
/** Read single byte from specified SPI channel */
// Read single byte from specified SPI channel
uint8_t spiRec(uint32_t chan);
//
// ADC
//
#define HAL_ANALOG_SELECT(pin) HAL_adc_enable_channel(pin)
#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin)
#define HAL_READ_ADC() HAL_adc_get_result()

2
Marlin/src/HAL/HAL_STM32F1/HAL.h

@ -73,7 +73,7 @@
#error "SERIAL_PORT must be from -1 to 3"
#endif
#if SERIAL_PORT == -1
extern USBSerial SerialUSB;
extern USBSerial SerialUSB;
#define MYSERIAL0 SerialUSB
#elif SERIAL_PORT == 0
#define MYSERIAL0 Serial

Loading…
Cancel
Save