Browse Source

Enforce minimum TMC2130 / TMC2208 libs

pull/1/head
Scott Lahteine 7 years ago
parent
commit
a891af2f7a
  1. 130
      Marlin/src/inc/SanityCheck.h
  2. 8
      Marlin/src/module/stepper_indirection.cpp
  3. 4
      platformio.ini

130
Marlin/src/inc/SanityCheck.h

@ -1393,36 +1393,36 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
* Make sure HAVE_TMC26X is warranted
*/
#if ENABLED(HAVE_TMC26X) && !( \
ENABLED( X_IS_TMC26X) \
|| ENABLED(X2_IS_TMC26X) \
|| ENABLED( Y_IS_TMC26X) \
|| ENABLED(Y2_IS_TMC26X) \
|| ENABLED( Z_IS_TMC26X) \
|| ENABLED(Z2_IS_TMC26X) \
|| ENABLED(E0_IS_TMC26X) \
|| ENABLED(E1_IS_TMC26X) \
|| ENABLED(E2_IS_TMC26X) \
|| ENABLED(E3_IS_TMC26X) \
|| ENABLED(E4_IS_TMC26X) \
ENABLED( X_IS_TMC26X ) \
|| ENABLED( X2_IS_TMC26X ) \
|| ENABLED( Y_IS_TMC26X ) \
|| ENABLED( Y2_IS_TMC26X ) \
|| ENABLED( Z_IS_TMC26X ) \
|| ENABLED( Z2_IS_TMC26X ) \
|| ENABLED( E0_IS_TMC26X ) \
|| ENABLED( E1_IS_TMC26X ) \
|| ENABLED( E2_IS_TMC26X ) \
|| ENABLED( E3_IS_TMC26X ) \
|| ENABLED( E4_IS_TMC26X ) \
)
#error "HAVE_TMC26X requires at least one TMC26X stepper to be set."
#endif
/**
* TMC2130 Requirements
* Make sure HAVE_TMC2130 is warranted
*/
#if ENABLED(HAVE_TMC2130)
#if !( ENABLED( X_IS_TMC2130) \
|| ENABLED(X2_IS_TMC2130) \
|| ENABLED( Y_IS_TMC2130) \
|| ENABLED(Y2_IS_TMC2130) \
|| ENABLED( Z_IS_TMC2130) \
|| ENABLED(Z2_IS_TMC2130) \
|| ENABLED(E0_IS_TMC2130) \
|| ENABLED(E1_IS_TMC2130) \
|| ENABLED(E2_IS_TMC2130) \
|| ENABLED(E3_IS_TMC2130) \
|| ENABLED(E4_IS_TMC2130) )
#if !( ENABLED( X_IS_TMC2130 ) \
|| ENABLED( X2_IS_TMC2130 ) \
|| ENABLED( Y_IS_TMC2130 ) \
|| ENABLED( Y2_IS_TMC2130 ) \
|| ENABLED( Z_IS_TMC2130 ) \
|| ENABLED( Z2_IS_TMC2130 ) \
|| ENABLED( E0_IS_TMC2130 ) \
|| ENABLED( E1_IS_TMC2130 ) \
|| ENABLED( E2_IS_TMC2130 ) \
|| ENABLED( E3_IS_TMC2130 ) \
|| ENABLED( E4_IS_TMC2130 ) )
#error "HAVE_TMC2130 requires at least one TMC2130 stepper to be set."
#elif ENABLED(HYBRID_THRESHOLD) && DISABLED(STEALTHCHOP)
#error "Enable STEALTHCHOP to use HYBRID_THRESHOLD."
@ -1476,36 +1476,38 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
#endif
/**
* TMC2208 Requirements
*/
#if ENABLED(HAVE_TMC2208)
#if !( ENABLED( X_IS_TMC2208) \
|| ENABLED(X2_IS_TMC2208) \
|| ENABLED( Y_IS_TMC2208) \
|| ENABLED(Y2_IS_TMC2208) \
|| ENABLED( Z_IS_TMC2208) \
|| ENABLED(Z2_IS_TMC2208) \
|| ENABLED(E0_IS_TMC2208) \
|| ENABLED(E1_IS_TMC2208) \
|| ENABLED(E2_IS_TMC2208) \
|| ENABLED(E3_IS_TMC2208) \
|| ENABLED(E4_IS_TMC2208 ) )
#error "HAVE_TMC2208 requires at least one TMC2208 stepper to be set."
// Software UART and ENDSTOP_INTERRUPTS both use Pin Change interrupts (PCI)
#elif ENABLED(ENDSTOP_INTERRUPTS_FEATURE) && \
!( defined( X_HARDWARE_SERIAL) \
|| defined(X2_HARDWARE_SERIAL) \
|| defined( Y_HARDWARE_SERIAL) \
|| defined(Y2_HARDWARE_SERIAL) \
|| defined( Z_HARDWARE_SERIAL) \
|| defined(Z2_HARDWARE_SERIAL) \
|| defined(E0_HARDWARE_SERIAL) \
|| defined(E1_HARDWARE_SERIAL) \
|| defined(E2_HARDWARE_SERIAL) \
|| defined(E3_HARDWARE_SERIAL) \
|| defined(E4_HARDWARE_SERIAL) )
#error "Select *_HARDWARE_SERIAL to use both TMC2208 and ENDSTOP_INTERRUPTS_FEATURE."
#endif
* Make sure HAVE_TMC2208 is warranted
*/
#if ENABLED(HAVE_TMC2208) && !( \
ENABLED( X_IS_TMC2208 ) \
|| ENABLED( X2_IS_TMC2208 ) \
|| ENABLED( Y_IS_TMC2208 ) \
|| ENABLED( Y2_IS_TMC2208 ) \
|| ENABLED( Z_IS_TMC2208 ) \
|| ENABLED( Z2_IS_TMC2208 ) \
|| ENABLED( E0_IS_TMC2208 ) \
|| ENABLED( E1_IS_TMC2208 ) \
|| ENABLED( E2_IS_TMC2208 ) \
|| ENABLED( E3_IS_TMC2208 ) )
#error "HAVE_TMC2208 requires at least one TMC2208 stepper to be set."
#endif
/**
* TMC2208 software UART and ENDSTOP_INTERRUPTS both use pin change interrupts (PCI)
*/
#if ENABLED(HAVE_TMC2208) && ENABLED(ENDSTOP_INTERRUPTS_FEATURE) && !( \
defined(X_HARDWARE_SERIAL ) \
|| defined(X2_HARDWARE_SERIAL) \
|| defined(Y_HARDWARE_SERIAL ) \
|| defined(Y2_HARDWARE_SERIAL) \
|| defined(Z_HARDWARE_SERIAL ) \
|| defined(Z2_HARDWARE_SERIAL) \
|| defined(E0_HARDWARE_SERIAL) \
|| defined(E1_HARDWARE_SERIAL) \
|| defined(E2_HARDWARE_SERIAL) \
|| defined(E3_HARDWARE_SERIAL) \
|| defined(E4_HARDWARE_SERIAL) )
#error "select hardware UART for TMC2208 to use both TMC2208 and ENDSTOP_INTERRUPTS_FEATURE."
#endif
#if ENABLED(HYBRID_THRESHOLD) && DISABLED(STEALTHCHOP)
@ -1520,17 +1522,17 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
* Make sure HAVE_L6470DRIVER is warranted
*/
#if ENABLED(HAVE_L6470DRIVER) && !( \
ENABLED( X_IS_L6470) \
|| ENABLED(X2_IS_L6470) \
|| ENABLED( Y_IS_L6470) \
|| ENABLED(Y2_IS_L6470) \
|| ENABLED( Z_IS_L6470) \
|| ENABLED(Z2_IS_L6470) \
|| ENABLED(E0_IS_L6470) \
|| ENABLED(E1_IS_L6470) \
|| ENABLED(E2_IS_L6470) \
|| ENABLED(E3_IS_L6470) \
|| ENABLED(E4_IS_L6470) \
ENABLED( X_IS_L6470 ) \
|| ENABLED( X2_IS_L6470 ) \
|| ENABLED( Y_IS_L6470 ) \
|| ENABLED( Y2_IS_L6470 ) \
|| ENABLED( Z_IS_L6470 ) \
|| ENABLED( Z2_IS_L6470 ) \
|| ENABLED( E0_IS_L6470 ) \
|| ENABLED( E1_IS_L6470 ) \
|| ENABLED( E2_IS_L6470 ) \
|| ENABLED( E3_IS_L6470 ) \
|| ENABLED( E4_IS_L6470 ) \
)
#error "HAVE_L6470DRIVER requires at least one L6470 stepper to be set."
#endif

8
Marlin/src/module/stepper_indirection.cpp

@ -135,6 +135,10 @@
#include "planner.h"
#include "../core/enum.h"
#if TMC2130STEPPER_VERSION < 0x020201
#error "Update TMC2130Stepper library to 2.2.1 or newer."
#endif
#if ENABLED(TMC_USE_SW_SPI)
#define _TMC2130_DEFINE(ST) TMC2130Stepper stepper##ST(ST##_ENABLE_PIN, ST##_DIR_PIN, ST##_STEP_PIN, ST##_CS_PIN, TMC_SW_MOSI, TMC_SW_MISO, TMC_SW_SCK)
#else
@ -285,6 +289,10 @@
#include <TMC2208Stepper.h>
#include "planner.h"
#if TMC2208STEPPER_VERSION < 0x000101
#error "Update TMC2208Stepper library to 0.1.1 or newer."
#endif
#define _TMC2208_DEFINE_HARDWARE(ST) TMC2208Stepper stepper##ST(&ST##_HARDWARE_SERIAL)
#define _TMC2208_DEFINE_SOFTWARE(ST) SoftwareSerial ST##_HARDWARE_SERIAL = SoftwareSerial(ST##_SERIAL_RX_PIN, ST##_SERIAL_TX_PIN); \
TMC2208Stepper stepper##ST(&ST##_HARDWARE_SERIAL, ST##_SERIAL_RX_PIN > -1)

4
platformio.ini

@ -31,7 +31,7 @@ lib_deps =
https://github.com/MarlinFirmware/U8glib-HAL/archive/dev.zip
LiquidCrystal_I2C@1.1.2
TMC2130Stepper
https://github.com/teemuatlut/TMC2208Stepper/archive/v0.0.4.zip
https://github.com/teemuatlut/TMC2208Stepper/archive/v0.1.1.zip
Adafruit NeoPixel@1.1.3
https://github.com/lincomatic/LiquidTWI2/archive/30aa480.zip
https://github.com/ameyer/Arduino-L6470/archive/0c5e5de.zip
@ -126,7 +126,7 @@ lib_ldf_mode = off
lib_extra_dirs = frameworks
lib_deps = CMSIS-LPC1768
https://github.com/MarlinFirmware/U8glib-HAL/archive/dev.zip
TMC2130Stepper@>=2.2.0
TMC2130Stepper@>=2.2.1
extra_scripts = Marlin/src/HAL/HAL_LPC1768/lpc1768_flag_script.py
src_filter = ${common.default_src_filter}
monitor_baud = 250000

Loading…
Cancel
Save