Enforce minimum TMC2130 / TMC2208 libs

Marlin/src/inc/SanityCheck.h

@@ -1409,7 +1409,7 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
 #endif
 
 /**
- * TMC2130 Requirements
+ * Make sure HAVE_TMC2130 is warranted
  */
 #if ENABLED(HAVE_TMC2130)
   #if !( ENABLED(  X_IS_TMC2130 ) \
@@ -1476,10 +1476,10 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
 #endif
 
 /**
- * TMC2208 Requirements
+ * Make sure HAVE_TMC2208 is warranted
  */
-#if ENABLED(HAVE_TMC2208)
+#if ENABLED(HAVE_TMC2208) && !( \
-  #if !( ENABLED( X_IS_TMC2208) \
+       ENABLED(  X_IS_TMC2208 ) \
     || ENABLED( X2_IS_TMC2208 ) \
     || ENABLED(  Y_IS_TMC2208 ) \
     || ENABLED( Y2_IS_TMC2208 ) \
@@ -1488,12 +1488,15 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
     || ENABLED( E0_IS_TMC2208 ) \
     || ENABLED( E1_IS_TMC2208 ) \
     || ENABLED( E2_IS_TMC2208 ) \
-      || ENABLED(E3_IS_TMC2208) \
+    || ENABLED( E3_IS_TMC2208 ) )
-      || ENABLED(E4_IS_TMC2208 ) )
   #error "HAVE_TMC2208 requires at least one TMC2208 stepper to be set."
-  // Software UART and ENDSTOP_INTERRUPTS both use Pin Change interrupts (PCI)
+#endif
-  #elif ENABLED(ENDSTOP_INTERRUPTS_FEATURE) && \
+
-      !( defined( X_HARDWARE_SERIAL) \
+/**
+ * TMC2208 software UART and ENDSTOP_INTERRUPTS both use pin change interrupts (PCI)
+ */
+#if ENABLED(HAVE_TMC2208) && ENABLED(ENDSTOP_INTERRUPTS_FEATURE) && !( \
+       defined(X_HARDWARE_SERIAL ) \
     || defined(X2_HARDWARE_SERIAL) \
     || defined(Y_HARDWARE_SERIAL ) \
     || defined(Y2_HARDWARE_SERIAL) \
@@ -1504,8 +1507,7 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
     || defined(E2_HARDWARE_SERIAL) \
     || defined(E3_HARDWARE_SERIAL) \
     || defined(E4_HARDWARE_SERIAL) )
-    #error "Select *_HARDWARE_SERIAL to use both TMC2208 and ENDSTOP_INTERRUPTS_FEATURE."
+  #error "select hardware UART for TMC2208 to use both TMC2208 and ENDSTOP_INTERRUPTS_FEATURE."
-  #endif
 #endif
 
 #if ENABLED(HYBRID_THRESHOLD) && DISABLED(STEALTHCHOP)

Marlin/src/module/stepper_indirection.cpp

@@ -135,6 +135,10 @@
   #include "planner.h"
   #include "../core/enum.h"
 
+  #if TMC2130STEPPER_VERSION < 0x020201
+    #error "Update TMC2130Stepper library to 2.2.1 or newer."
+  #endif
+
   #if ENABLED(TMC_USE_SW_SPI)
     #define _TMC2130_DEFINE(ST) TMC2130Stepper stepper##ST(ST##_ENABLE_PIN, ST##_DIR_PIN, ST##_STEP_PIN, ST##_CS_PIN, TMC_SW_MOSI, TMC_SW_MISO, TMC_SW_SCK)
   #else
@@ -285,6 +289,10 @@
   #include <TMC2208Stepper.h>
   #include "planner.h"
 
+  #if TMC2208STEPPER_VERSION < 0x000101
+    #error "Update TMC2208Stepper library to 0.1.1 or newer."
+  #endif
+
   #define _TMC2208_DEFINE_HARDWARE(ST) TMC2208Stepper stepper##ST(&ST##_HARDWARE_SERIAL)
   #define _TMC2208_DEFINE_SOFTWARE(ST) SoftwareSerial ST##_HARDWARE_SERIAL = SoftwareSerial(ST##_SERIAL_RX_PIN, ST##_SERIAL_TX_PIN); \
                                        TMC2208Stepper stepper##ST(&ST##_HARDWARE_SERIAL, ST##_SERIAL_RX_PIN > -1)

platformio.ini

@@ -31,7 +31,7 @@ lib_deps =
   https://github.com/MarlinFirmware/U8glib-HAL/archive/dev.zip
   LiquidCrystal_I2C@1.1.2
   TMC2130Stepper
-  https://github.com/teemuatlut/TMC2208Stepper/archive/v0.0.4.zip
+  https://github.com/teemuatlut/TMC2208Stepper/archive/v0.1.1.zip
   Adafruit NeoPixel@1.1.3
   https://github.com/lincomatic/LiquidTWI2/archive/30aa480.zip
   https://github.com/ameyer/Arduino-L6470/archive/0c5e5de.zip
@@ -126,7 +126,7 @@ lib_ldf_mode    = off
 lib_extra_dirs  = frameworks
 lib_deps        = CMSIS-LPC1768
   https://github.com/MarlinFirmware/U8glib-HAL/archive/dev.zip
-  TMC2130Stepper@>=2.2.0
+  TMC2130Stepper@>=2.2.1
 extra_scripts   = Marlin/src/HAL/HAL_LPC1768/lpc1768_flag_script.py
 src_filter      = ${common.default_src_filter}
 monitor_baud    = 250000