Scott Lahteine
3 years ago
19 changed files with 1537 additions and 19 deletions
@ -0,0 +1,38 @@ |
|||
/**
|
|||
* Marlin 3D Printer Firmware |
|||
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|||
* |
|||
* Based on Sprinter and grbl. |
|||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
|||
* |
|||
* This program is free software: you can redistribute it and/or modify |
|||
* it under the terms of the GNU General Public License as published by |
|||
* the Free Software Foundation, either version 3 of the License, or |
|||
* (at your option) any later version. |
|||
* |
|||
* This program is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|||
* GNU General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU General Public License |
|||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|||
* |
|||
*/ |
|||
#pragma once |
|||
|
|||
/**
|
|||
* Creality V24S1_301F4 (STM32F401RC) board pin assignments as found on Ender 3 S1. |
|||
*/ |
|||
|
|||
#ifndef BOARD_INFO_NAME |
|||
#define BOARD_INFO_NAME "Creality V24S1-301F4" |
|||
#endif |
|||
#ifndef DEFAULT_MACHINE_NAME |
|||
#define DEFAULT_MACHINE_NAME "Ender-3 S1 F4" |
|||
#endif |
|||
|
|||
#define DISABLE_DEBUG false // DISABLE_(DEBUG|JTAG) is not supported for STM32F4.
|
|||
#define ALLOW_STM32F4 |
|||
|
|||
#include "../stm32f1/pins_CREALITY_V24S1_301.h" |
|||
@ -0,0 +1,65 @@ |
|||
{ |
|||
"build": { |
|||
"core": "stm32", |
|||
"cpu": "cortex-m4", |
|||
"extra_flags": "-DSTM32F401xx", |
|||
"f_cpu": "84000000L", |
|||
"hwids": [ |
|||
[ |
|||
"0x1EAF", |
|||
"0x0003" |
|||
], |
|||
[ |
|||
"0x0483", |
|||
"0x3748" |
|||
] |
|||
], |
|||
"ldscript": "ldscript.ld", |
|||
"mcu": "stm32f401rct6", |
|||
"variant": "MARLIN_CREALITY_STM32F401RC" |
|||
}, |
|||
"debug": { |
|||
"jlink_device": "STM32F401RC", |
|||
"openocd_target": "stm32f4x", |
|||
"svd_path": "STM32F40x.svd", |
|||
"tools": { |
|||
"stlink": { |
|||
"server": { |
|||
"arguments": [ |
|||
"-f", |
|||
"scripts/interface/stlink.cfg", |
|||
"-c", |
|||
"transport select hla_swd", |
|||
"-f", |
|||
"scripts/target/stm32f4x.cfg", |
|||
"-c", |
|||
"reset_config none" |
|||
], |
|||
"executable": "bin/openocd", |
|||
"package": "tool-openocd" |
|||
} |
|||
} |
|||
} |
|||
}, |
|||
"frameworks": [ |
|||
"arduino", |
|||
"stm32cube" |
|||
], |
|||
"name": "STM32F401RC (64k RAM. 256k Flash)", |
|||
"upload": { |
|||
"disable_flushing": false, |
|||
"maximum_ram_size": 65536, |
|||
"maximum_size": 262144, |
|||
"protocol": "stlink", |
|||
"protocols": [ |
|||
"stlink", |
|||
"dfu", |
|||
"jlink" |
|||
], |
|||
"require_upload_port": true, |
|||
"use_1200bps_touch": false, |
|||
"wait_for_upload_port": false |
|||
}, |
|||
"url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f401rc.html", |
|||
"vendor": "Generic" |
|||
} |
|||
@ -0,0 +1,252 @@ |
|||
/*
|
|||
******************************************************************************* |
|||
* Copyright (c) 2019, STMicroelectronics |
|||
* All rights reserved. |
|||
* |
|||
* Redistribution and use in source and binary forms, with or without |
|||
* modification, are permitted provided that the following conditions are met: |
|||
* |
|||
* 1. Redistributions of source code must retain the above copyright notice, |
|||
* this list of conditions and the following disclaimer. |
|||
* 2. Redistributions in binary form must reproduce the above copyright notice, |
|||
* this list of conditions and the following disclaimer in the documentation |
|||
* and/or other materials provided with the distribution. |
|||
* 3. Neither the name of STMicroelectronics nor the names of its contributors |
|||
* may be used to endorse or promote products derived from this software |
|||
* without specific prior written permission. |
|||
* |
|||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
|||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
|||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
|||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
|||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
|||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
|||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
|||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
|||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
|||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
|||
******************************************************************************* |
|||
* Automatically generated from STM32F401R[(B-C)|(D-E)]Tx.xml |
|||
*/ |
|||
#include "Arduino.h" |
|||
#include "PeripheralPins.h" |
|||
|
|||
/* =====
|
|||
* Note: Commented lines are alternative possibilities which are not used per default. |
|||
* If you change them, you will have to know what you do |
|||
* ===== |
|||
*/ |
|||
|
|||
//*** ADC ***
|
|||
|
|||
#ifdef HAL_ADC_MODULE_ENABLED |
|||
WEAK const PinMap PinMap_ADC[] = { |
|||
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
|
|||
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
|
|||
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
|
|||
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
|
|||
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
|
|||
{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
|
|||
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
|
|||
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
|
|||
{PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
|
|||
{PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
|
|||
{PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
|
|||
{PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
|
|||
{PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
|
|||
{PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
|
|||
{PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
|
|||
{PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
|
|||
{NC, NP, 0} |
|||
}; |
|||
#endif |
|||
|
|||
//*** No DAC ***
|
|||
|
|||
//*** I2C ***
|
|||
|
|||
#ifdef HAL_I2C_MODULE_ENABLED |
|||
WEAK const PinMap PinMap_I2C_SDA[] = { |
|||
{PB_3, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)}, |
|||
{PB_4, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)}, |
|||
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, |
|||
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, |
|||
{PC_9, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, |
|||
{NC, NP, 0} |
|||
}; |
|||
|
|||
WEAK const PinMap PinMap_I2C_SCL[] = { |
|||
{PA_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, |
|||
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, |
|||
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, |
|||
{PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, |
|||
{NC, NP, 0} |
|||
}; |
|||
#endif |
|||
|
|||
//*** PWM ***
|
|||
|
|||
#ifdef HAL_TIM_MODULE_ENABLED |
|||
WEAK const PinMap PinMap_PWM[] = { |
|||
//{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
|||
{PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
|
|||
//{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
|||
{PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
|
|||
//{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
|||
{PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
|
|||
//{PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
|
|||
//{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
|
|||
{PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
|
|||
//{PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
|
|||
{PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
|||
{PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
|||
//{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
|||
{PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
|||
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
|
|||
{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
|
|||
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
|
|||
{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
|
|||
{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
|||
//{PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
|||
{PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
|||
//{PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
|||
{PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
|||
{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
|||
{PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
|||
{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
|||
{PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
|
|||
{PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
|
|||
{PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
|
|||
//{PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
|
|||
{PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
|||
//{PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
|
|||
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
|||
{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
|||
{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
|||
{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
|||
{PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
|||
{PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
|||
{PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
|||
{PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
|||
{NC, NP, 0} |
|||
}; |
|||
#endif |
|||
|
|||
//*** SERIAL ***
|
|||
|
|||
#ifdef HAL_UART_MODULE_ENABLED |
|||
WEAK const PinMap PinMap_UART_TX[] = { |
|||
{PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, |
|||
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, |
|||
{PA_11, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, |
|||
{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, |
|||
{PC_6, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, |
|||
{NC, NP, 0} |
|||
}; |
|||
|
|||
WEAK const PinMap PinMap_UART_RX[] = { |
|||
{PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, |
|||
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, |
|||
{PA_12, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, |
|||
{PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, |
|||
{PC_7, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, |
|||
{NC, NP, 0} |
|||
}; |
|||
|
|||
WEAK const PinMap PinMap_UART_RTS[] = { |
|||
{PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, |
|||
{PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, |
|||
{NC, NP, 0} |
|||
}; |
|||
|
|||
WEAK const PinMap PinMap_UART_CTS[] = { |
|||
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, |
|||
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, |
|||
{NC, NP, 0} |
|||
}; |
|||
#endif |
|||
|
|||
//*** SPI ***
|
|||
|
|||
#ifdef HAL_SPI_MODULE_ENABLED |
|||
WEAK const PinMap PinMap_SPI_MOSI[] = { |
|||
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, |
|||
//{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
|||
{PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, |
|||
{PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, |
|||
{PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, |
|||
{PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, |
|||
{NC, NP, 0} |
|||
}; |
|||
|
|||
WEAK const PinMap PinMap_SPI_MISO[] = { |
|||
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, |
|||
//{PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
|||
{PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, |
|||
{PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, |
|||
{PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, |
|||
{PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, |
|||
{NC, NP, 0} |
|||
}; |
|||
|
|||
WEAK const PinMap PinMap_SPI_SCLK[] = { |
|||
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, |
|||
//{PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
|||
{PB_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, |
|||
{PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, |
|||
{PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, |
|||
{PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, |
|||
{NC, NP, 0} |
|||
}; |
|||
|
|||
WEAK const PinMap PinMap_SPI_SSEL[] = { |
|||
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, |
|||
//{PA_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
|||
//{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
|||
{PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, |
|||
{PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, |
|||
{PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, |
|||
{NC, NP, 0} |
|||
}; |
|||
#endif |
|||
|
|||
//*** No CAN ***
|
|||
|
|||
//*** No ETHERNET ***
|
|||
|
|||
//*** No QUADSPI ***
|
|||
|
|||
//*** USB ***
|
|||
|
|||
#ifdef HAL_PCD_MODULE_ENABLED |
|||
WEAK const PinMap PinMap_USB_OTG_FS[] = { |
|||
#ifndef ARDUINO_CoreBoard_F401RC |
|||
{PA_8, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF
|
|||
{PA_9, USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS
|
|||
{PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID
|
|||
#endif |
|||
{PA_11, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DM
|
|||
{PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DP
|
|||
{NC, NP, 0} |
|||
}; |
|||
#endif |
|||
|
|||
//*** No USB_OTG_HS ***
|
|||
|
|||
//*** SD ***
|
|||
|
|||
#ifdef HAL_SD_MODULE_ENABLED |
|||
WEAK const PinMap PinMap_SD[] = { |
|||
{PB_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D4
|
|||
{PB_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D5
|
|||
{PC_6, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D6
|
|||
{PC_7, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D7
|
|||
{PC_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D0
|
|||
{PC_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D1
|
|||
{PC_10, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D2
|
|||
{PC_11, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D3
|
|||
{PC_12, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CK
|
|||
{PD_2, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CMD
|
|||
{NC, NP, 0} |
|||
}; |
|||
#endif |
|||
@ -0,0 +1,33 @@ |
|||
/* SYS_WKUP */ |
|||
#ifdef PWR_WAKEUP_PIN1 |
|||
SYS_WKUP1 = PA_0, |
|||
#endif |
|||
#ifdef PWR_WAKEUP_PIN2 |
|||
SYS_WKUP2 = NC, |
|||
#endif |
|||
#ifdef PWR_WAKEUP_PIN3 |
|||
SYS_WKUP3 = NC, |
|||
#endif |
|||
#ifdef PWR_WAKEUP_PIN4 |
|||
SYS_WKUP4 = NC, |
|||
#endif |
|||
#ifdef PWR_WAKEUP_PIN5 |
|||
SYS_WKUP5 = NC, |
|||
#endif |
|||
#ifdef PWR_WAKEUP_PIN6 |
|||
SYS_WKUP6 = NC, |
|||
#endif |
|||
#ifdef PWR_WAKEUP_PIN7 |
|||
SYS_WKUP7 = NC, |
|||
#endif |
|||
#ifdef PWR_WAKEUP_PIN8 |
|||
SYS_WKUP8 = NC, |
|||
#endif |
|||
/* USB */ |
|||
#ifdef USBCON |
|||
USB_OTG_FS_SOF = PA_8, |
|||
USB_OTG_FS_VBUS = PA_9, |
|||
USB_OTG_FS_ID = PA_10, |
|||
USB_OTG_FS_DM = PA_11, |
|||
USB_OTG_FS_DP = PA_12, |
|||
#endif |
|||
@ -0,0 +1,495 @@ |
|||
/**
|
|||
****************************************************************************** |
|||
* @file stm32f4xx_hal_conf.h |
|||
* @brief HAL configuration file. |
|||
****************************************************************************** |
|||
* @attention |
|||
* |
|||
* <h2><center>© Copyright (c) 2017 STMicroelectronics. |
|||
* All rights reserved.</center></h2> |
|||
* |
|||
* This software component is licensed by ST under BSD 3-Clause license, |
|||
* the "License"; You may not use this file except in compliance with the |
|||
* License. You may obtain a copy of the License at: |
|||
* opensource.org/licenses/BSD-3-Clause |
|||
* |
|||
****************************************************************************** |
|||
*/ |
|||
|
|||
/* Define to prevent recursive inclusion -------------------------------------*/ |
|||
#ifndef __STM32F4xx_HAL_CONF_CUSTOM |
|||
#define __STM32F4xx_HAL_CONF_CUSTOM |
|||
|
|||
#ifdef __cplusplus |
|||
extern "C" { |
|||
#endif |
|||
|
|||
/* Exported types ------------------------------------------------------------*/ |
|||
/* Exported constants --------------------------------------------------------*/ |
|||
|
|||
/* ########################## Module Selection ############################## */ |
|||
/**
|
|||
* @brief This is the list of modules to be used in the HAL driver |
|||
*/ |
|||
#define HAL_MODULE_ENABLED |
|||
#define HAL_ADC_MODULE_ENABLED |
|||
#define HAL_CRC_MODULE_ENABLED |
|||
#define HAL_DMA_MODULE_ENABLED |
|||
#define HAL_FLASH_MODULE_ENABLED |
|||
#define HAL_GPIO_MODULE_ENABLED |
|||
#define HAL_I2C_MODULE_ENABLED |
|||
#define HAL_IWDG_MODULE_ENABLED |
|||
#define HAL_PWR_MODULE_ENABLED |
|||
#define HAL_RCC_MODULE_ENABLED |
|||
#define HAL_RTC_MODULE_ENABLED |
|||
#define HAL_SPI_MODULE_ENABLED |
|||
#define HAL_TIM_MODULE_ENABLED |
|||
#define HAL_CORTEX_MODULE_ENABLED |
|||
//#define HAL_PCD_MODULE_ENABLED // Automatically added if any type of USB is enabled, as in Arduino IDE. (STM32 v3.10700.191028)
|
|||
|
|||
//#define HAL_CAN_MODULE_ENABLED
|
|||
//#define HAL_CAN_LEGACY_MODULE_ENABLED
|
|||
//#define HAL_CEC_MODULE_ENABLED
|
|||
//#define HAL_CRYP_MODULE_ENABLED
|
|||
//#define HAL_DAC_MODULE_ENABLED
|
|||
//#define HAL_DCMI_MODULE_ENABLED
|
|||
//#define HAL_DMA2D_MODULE_ENABLED
|
|||
//#define HAL_ETH_MODULE_ENABLED
|
|||
//#define HAL_NAND_MODULE_ENABLED
|
|||
//#define HAL_NOR_MODULE_ENABLED
|
|||
//#define HAL_PCCARD_MODULE_ENABLED
|
|||
//#define HAL_SRAM_MODULE_ENABLED
|
|||
//#define HAL_SDRAM_MODULE_ENABLED
|
|||
//#define HAL_HASH_MODULE_ENABLED
|
|||
//#define HAL_EXTI_MODULE_ENABLED
|
|||
//#define HAL_SMBUS_MODULE_ENABLED
|
|||
//#define HAL_I2S_MODULE_ENABLED
|
|||
//#define HAL_LTDC_MODULE_ENABLED
|
|||
//#define HAL_DSI_MODULE_ENABLED
|
|||
//#define HAL_QSPI_MODULE_ENABLED
|
|||
//#define HAL_RNG_MODULE_ENABLED
|
|||
//#define HAL_SAI_MODULE_ENABLED
|
|||
#define HAL_SD_MODULE_ENABLED |
|||
//#define HAL_UART_MODULE_ENABLED
|
|||
//#define HAL_USART_MODULE_ENABLED
|
|||
//#define HAL_IRDA_MODULE_ENABLED
|
|||
//#define HAL_SMARTCARD_MODULE_ENABLED
|
|||
//#define HAL_WWDG_MODULE_ENABLED
|
|||
//#define HAL_HCD_MODULE_ENABLED
|
|||
//#define HAL_FMPI2C_MODULE_ENABLED
|
|||
//#define HAL_SPDIFRX_MODULE_ENABLED
|
|||
//#define HAL_DFSDM_MODULE_ENABLED
|
|||
//#define HAL_LPTIM_MODULE_ENABLED
|
|||
//#define HAL_MMC_MODULE_ENABLED
|
|||
|
|||
/* ########################## HSE/HSI Values adaptation ##################### */ |
|||
/**
|
|||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application. |
|||
* This value is used by the RCC HAL module to compute the system frequency |
|||
* (when HSE is used as system clock source, directly or through the PLL). |
|||
*/ |
|||
#ifndef HSE_VALUE |
|||
#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ |
|||
#endif /* HSE_VALUE */ |
|||
|
|||
#ifndef HSE_STARTUP_TIMEOUT |
|||
#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ |
|||
#endif /* HSE_STARTUP_TIMEOUT */ |
|||
|
|||
/**
|
|||
* @brief Internal High Speed oscillator (HSI) value. |
|||
* This value is used by the RCC HAL module to compute the system frequency |
|||
* (when HSI is used as system clock source, directly or through the PLL). |
|||
*/ |
|||
#ifndef HSI_VALUE |
|||
#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz */ |
|||
#endif /* HSI_VALUE */ |
|||
|
|||
/**
|
|||
* @brief Internal Low Speed oscillator (LSI) value. |
|||
*/ |
|||
#ifndef LSI_VALUE |
|||
#define LSI_VALUE 32000U /*!< LSI Typical Value in Hz */ |
|||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz |
|||
The real value may vary depending on the variations |
|||
in voltage and temperature. */ |
|||
/**
|
|||
* @brief External Low Speed oscillator (LSE) value. |
|||
*/ |
|||
#ifndef LSE_VALUE |
|||
#define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */ |
|||
#endif /* LSE_VALUE */ |
|||
|
|||
#ifndef LSE_STARTUP_TIMEOUT |
|||
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ |
|||
#endif /* LSE_STARTUP_TIMEOUT */ |
|||
|
|||
/**
|
|||
* @brief External clock source for I2S peripheral |
|||
* This value is used by the I2S HAL module to compute the I2S clock source |
|||
* frequency, this source is inserted directly through I2S_CKIN pad. |
|||
*/ |
|||
#ifndef EXTERNAL_CLOCK_VALUE |
|||
#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External oscillator in Hz*/ |
|||
#endif /* EXTERNAL_CLOCK_VALUE */ |
|||
|
|||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
|||
=== you can define the HSE value in your toolchain compiler preprocessor. */ |
|||
|
|||
/* ########################### System Configuration ######################### */ |
|||
/**
|
|||
* @brief This is the HAL system configuration section |
|||
*/ |
|||
#if !defined (VDD_VALUE) |
|||
#define VDD_VALUE 3300U /*!< Value of VDD in mv */ |
|||
#endif |
|||
#if !defined (TICK_INT_PRIORITY) |
|||
#define TICK_INT_PRIORITY 0x00U /*!< tick interrupt priority */ |
|||
#endif |
|||
#if !defined (USE_RTOS) |
|||
#define USE_RTOS 0U |
|||
#endif |
|||
#if !defined (PREFETCH_ENABLE) |
|||
#define PREFETCH_ENABLE 1U |
|||
#endif |
|||
#if !defined (INSTRUCTION_CACHE_ENABLE) |
|||
#define INSTRUCTION_CACHE_ENABLE 1U |
|||
#endif |
|||
#if !defined (DATA_CACHE_ENABLE) |
|||
#define DATA_CACHE_ENABLE 1U |
|||
#endif |
|||
|
|||
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ |
|||
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ |
|||
#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ |
|||
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ |
|||
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ |
|||
#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ |
|||
#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ |
|||
#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ |
|||
#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ |
|||
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ |
|||
#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ |
|||
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ |
|||
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ |
|||
#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */ |
|||
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ |
|||
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ |
|||
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ |
|||
#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ |
|||
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ |
|||
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ |
|||
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ |
|||
#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ |
|||
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ |
|||
#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ |
|||
#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ |
|||
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ |
|||
#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ |
|||
#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ |
|||
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ |
|||
#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ |
|||
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ |
|||
#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ |
|||
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ |
|||
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ |
|||
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ |
|||
#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ |
|||
#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ |
|||
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ |
|||
|
|||
/* ########################## Assert Selection ############################## */ |
|||
/**
|
|||
* @brief Uncomment the line below to expanse the "assert_param" macro in the |
|||
* HAL drivers code |
|||
*/ |
|||
/* #define USE_FULL_ASSERT 1U */ |
|||
|
|||
/* ################## Ethernet peripheral configuration ##################### */ |
|||
|
|||
/* Section 1 : Ethernet peripheral configuration */ |
|||
|
|||
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ |
|||
#define MAC_ADDR0 2U |
|||
#define MAC_ADDR1 0U |
|||
#define MAC_ADDR2 0U |
|||
#define MAC_ADDR3 0U |
|||
#define MAC_ADDR4 0U |
|||
#define MAC_ADDR5 0U |
|||
|
|||
/* Definition of the Ethernet driver buffers size and count */ |
|||
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ |
|||
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ |
|||
#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ |
|||
#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ |
|||
|
|||
/* Section 2: PHY configuration section */ |
|||
|
|||
/* DP83848_PHY_ADDRESS Address*/ |
|||
#define DP83848_PHY_ADDRESS 0x01U |
|||
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ |
|||
#define PHY_RESET_DELAY 0x000000FFU |
|||
/* PHY Configuration delay */ |
|||
#define PHY_CONFIG_DELAY 0x00000FFFU |
|||
|
|||
#define PHY_READ_TO 0x0000FFFFU |
|||
#define PHY_WRITE_TO 0x0000FFFFU |
|||
|
|||
/* Section 3: Common PHY Registers */ |
|||
|
|||
#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ |
|||
#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ |
|||
|
|||
#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ |
|||
#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ |
|||
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ |
|||
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ |
|||
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ |
|||
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ |
|||
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ |
|||
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ |
|||
#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ |
|||
#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ |
|||
|
|||
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ |
|||
#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ |
|||
#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ |
|||
|
|||
/* Section 4: Extended PHY Registers */ |
|||
#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ |
|||
|
|||
#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */ |
|||
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */ |
|||
|
|||
/* ################## SPI peripheral configuration ########################## */ |
|||
|
|||
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
|||
* Activated: CRC code is present inside driver |
|||
* Deactivated: CRC code cleaned from driver |
|||
*/ |
|||
#ifndef USE_SPI_CRC |
|||
#define USE_SPI_CRC 0U |
|||
#endif |
|||
|
|||
/* Includes ------------------------------------------------------------------*/ |
|||
/**
|
|||
* @brief Include module's header file |
|||
*/ |
|||
|
|||
#ifdef HAL_RCC_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_rcc.h" |
|||
#endif /* HAL_RCC_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_GPIO_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_gpio.h" |
|||
#endif /* HAL_GPIO_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_EXTI_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_exti.h" |
|||
#endif /* HAL_EXTI_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_DMA_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_dma.h" |
|||
#endif /* HAL_DMA_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_CORTEX_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_cortex.h" |
|||
#endif /* HAL_CORTEX_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_ADC_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_adc.h" |
|||
#endif /* HAL_ADC_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_CAN_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_can.h" |
|||
#endif /* HAL_CAN_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_can_legacy.h" |
|||
#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_CRC_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_crc.h" |
|||
#endif /* HAL_CRC_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_CRYP_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_cryp.h" |
|||
#endif /* HAL_CRYP_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_DMA2D_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_dma2d.h" |
|||
#endif /* HAL_DMA2D_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_DAC_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_dac.h" |
|||
#endif /* HAL_DAC_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_DCMI_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_dcmi.h" |
|||
#endif /* HAL_DCMI_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_ETH_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_eth.h" |
|||
#endif /* HAL_ETH_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_FLASH_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_flash.h" |
|||
#endif /* HAL_FLASH_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_SRAM_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_sram.h" |
|||
#endif /* HAL_SRAM_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_NOR_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_nor.h" |
|||
#endif /* HAL_NOR_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_NAND_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_nand.h" |
|||
#endif /* HAL_NAND_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_PCCARD_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_pccard.h" |
|||
#endif /* HAL_PCCARD_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_SDRAM_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_sdram.h" |
|||
#endif /* HAL_SDRAM_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_HASH_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_hash.h" |
|||
#endif /* HAL_HASH_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_I2C_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_i2c.h" |
|||
#endif /* HAL_I2C_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_SMBUS_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_smbus.h" |
|||
#endif /* HAL_SMBUS_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_I2S_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_i2s.h" |
|||
#endif /* HAL_I2S_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_IWDG_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_iwdg.h" |
|||
#endif /* HAL_IWDG_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_LTDC_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_ltdc.h" |
|||
#endif /* HAL_LTDC_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_PWR_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_pwr.h" |
|||
#endif /* HAL_PWR_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_RNG_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_rng.h" |
|||
#endif /* HAL_RNG_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_RTC_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_rtc.h" |
|||
#endif /* HAL_RTC_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_SAI_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_sai.h" |
|||
#endif /* HAL_SAI_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_SD_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_sd.h" |
|||
#endif /* HAL_SD_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_SPI_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_spi.h" |
|||
#endif /* HAL_SPI_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_TIM_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_tim.h" |
|||
#endif /* HAL_TIM_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_UART_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_uart.h" |
|||
#endif /* HAL_UART_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_USART_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_usart.h" |
|||
#endif /* HAL_USART_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_IRDA_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_irda.h" |
|||
#endif /* HAL_IRDA_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_SMARTCARD_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_smartcard.h" |
|||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_WWDG_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_wwdg.h" |
|||
#endif /* HAL_WWDG_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_PCD_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_pcd.h" |
|||
#endif /* HAL_PCD_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_HCD_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_hcd.h" |
|||
#endif /* HAL_HCD_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_DSI_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_dsi.h" |
|||
#endif /* HAL_DSI_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_QSPI_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_qspi.h" |
|||
#endif /* HAL_QSPI_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_CEC_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_cec.h" |
|||
#endif /* HAL_CEC_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_FMPI2C_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_fmpi2c.h" |
|||
#endif /* HAL_FMPI2C_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_SPDIFRX_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_spdifrx.h" |
|||
#endif /* HAL_SPDIFRX_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_DFSDM_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_dfsdm.h" |
|||
#endif /* HAL_DFSDM_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_LPTIM_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_lptim.h" |
|||
#endif /* HAL_LPTIM_MODULE_ENABLED */ |
|||
|
|||
#ifdef HAL_MMC_MODULE_ENABLED |
|||
#include "stm32f4xx_hal_mmc.h" |
|||
#endif /* HAL_MMC_MODULE_ENABLED */ |
|||
|
|||
/* Exported macro ------------------------------------------------------------*/ |
|||
#ifdef USE_FULL_ASSERT |
|||
/**
|
|||
* @brief The assert_param macro is used for function's parameters check. |
|||
* @param expr If expr is false, it calls assert_failed function |
|||
* which reports the name of the source file and the source |
|||
* line number of the call that failed. |
|||
* If expr is true, it returns no value. |
|||
* @retval None |
|||
*/ |
|||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) |
|||
/* Exported functions ------------------------------------------------------- */ |
|||
void assert_failed(uint8_t *file, uint32_t line); |
|||
#else |
|||
#define assert_param(expr) ((void)0U) |
|||
#endif /* USE_FULL_ASSERT */ |
|||
|
|||
#ifdef __cplusplus |
|||
} |
|||
#endif |
|||
|
|||
#endif /* __STM32F4xx_HAL_CONF_CUSTOM_H */ |
|||
|
|||
|
|||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |
|||
@ -0,0 +1,187 @@ |
|||
/* |
|||
***************************************************************************** |
|||
** |
|||
|
|||
** File : LinkerScript.ld |
|||
** |
|||
** Abstract : Linker script for STM32F401RETx Device with |
|||
** 512KByte FLASH, 96KByte RAM |
|||
** |
|||
** Set heap size, stack size and stack location according |
|||
** to application requirements. |
|||
** |
|||
** Set memory bank area and size if external memory is used. |
|||
** |
|||
** Target : STMicroelectronics STM32 |
|||
** |
|||
** |
|||
** Distribution: The file is distributed as is, without any warranty |
|||
** of any kind. |
|||
** |
|||
***************************************************************************** |
|||
** @attention |
|||
** |
|||
** <h2><center>© COPYRIGHT(c) 2014 Ac6</center></h2> |
|||
** |
|||
** Redistribution and use in source and binary forms, with or without modification, |
|||
** are permitted provided that the following conditions are met: |
|||
** 1. Redistributions of source code must retain the above copyright notice, |
|||
** this list of conditions and the following disclaimer. |
|||
** 2. Redistributions in binary form must reproduce the above copyright notice, |
|||
** this list of conditions and the following disclaimer in the documentation |
|||
** and/or other materials provided with the distribution. |
|||
** 3. Neither the name of Ac6 nor the names of its contributors |
|||
** may be used to endorse or promote products derived from this software |
|||
** without specific prior written permission. |
|||
** |
|||
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
|||
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
|||
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
|||
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
|||
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
|||
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
|||
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
|||
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
|||
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
|||
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
|||
** |
|||
***************************************************************************** |
|||
*/ |
|||
|
|||
/* Entry Point */ |
|||
ENTRY(Reset_Handler) |
|||
|
|||
/* Highest address of the user mode stack */ |
|||
_estack = 0x20010000; /* end of RAM */ |
|||
|
|||
/* Generate a link error if heap and stack don't fit into RAM */ |
|||
_Min_Heap_Size = 0x200;; /* required amount of heap */ |
|||
_Min_Stack_Size = 0x400;; /* required amount of stack */ |
|||
|
|||
/* Specify the memory areas */ |
|||
MEMORY |
|||
{ |
|||
FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET |
|||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 64K |
|||
} |
|||
|
|||
/* Define output sections */ |
|||
SECTIONS |
|||
{ |
|||
/* The startup code goes first into FLASH */ |
|||
.isr_vector : |
|||
{ |
|||
. = ALIGN(4); |
|||
KEEP(*(.isr_vector)) /* Startup code */ |
|||
. = ALIGN(4); |
|||
} >FLASH |
|||
|
|||
/* The program code and other data goes into FLASH */ |
|||
.text ALIGN(4): |
|||
{ |
|||
. = ALIGN(4); |
|||
*(.text) /* .text sections (code) */ |
|||
*(.text*) /* .text* sections (code) */ |
|||
*(.glue_7) /* glue arm to thumb code */ |
|||
*(.glue_7t) /* glue thumb to arm code */ |
|||
*(.eh_frame) |
|||
|
|||
KEEP (*(.init)) |
|||
KEEP (*(.fini)) |
|||
|
|||
. = ALIGN(4); |
|||
_etext = .; /* define a global symbols at end of code */ |
|||
} >FLASH |
|||
|
|||
/* Constant data goes into FLASH */ |
|||
.rodata : |
|||
{ |
|||
. = ALIGN(4); |
|||
*(.rodata) /* .rodata sections (constants, strings, etc.) */ |
|||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */ |
|||
. = ALIGN(4); |
|||
} >FLASH |
|||
|
|||
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH |
|||
.ARM : { |
|||
__exidx_start = .; |
|||
*(.ARM.exidx*) |
|||
__exidx_end = .; |
|||
} >FLASH |
|||
|
|||
.preinit_array : |
|||
{ |
|||
PROVIDE_HIDDEN (__preinit_array_start = .); |
|||
KEEP (*(.preinit_array*)) |
|||
PROVIDE_HIDDEN (__preinit_array_end = .); |
|||
} >FLASH |
|||
.init_array : |
|||
{ |
|||
PROVIDE_HIDDEN (__init_array_start = .); |
|||
KEEP (*(SORT(.init_array.*))) |
|||
KEEP (*(.init_array*)) |
|||
PROVIDE_HIDDEN (__init_array_end = .); |
|||
} >FLASH |
|||
.fini_array : |
|||
{ |
|||
PROVIDE_HIDDEN (__fini_array_start = .); |
|||
KEEP (*(SORT(.fini_array.*))) |
|||
KEEP (*(.fini_array*)) |
|||
PROVIDE_HIDDEN (__fini_array_end = .); |
|||
} >FLASH |
|||
|
|||
/* used by the startup to initialize data */ |
|||
_sidata = LOADADDR(.data); |
|||
|
|||
/* Initialized data sections goes into RAM, load LMA copy after code */ |
|||
.data : |
|||
{ |
|||
. = ALIGN(4); |
|||
_sdata = .; /* create a global symbol at data start */ |
|||
*(.data) /* .data sections */ |
|||
*(.data*) /* .data* sections */ |
|||
|
|||
. = ALIGN(4); |
|||
_edata = .; /* define a global symbol at data end */ |
|||
} >RAM AT> FLASH |
|||
|
|||
|
|||
/* Uninitialized data section */ |
|||
. = ALIGN(4); |
|||
.bss : |
|||
{ |
|||
/* This is used by the startup in order to initialize the .bss secion */ |
|||
_sbss = .; /* define a global symbol at bss start */ |
|||
__bss_start__ = _sbss; |
|||
*(.bss) |
|||
*(.bss*) |
|||
*(COMMON) |
|||
|
|||
. = ALIGN(4); |
|||
_ebss = .; /* define a global symbol at bss end */ |
|||
__bss_end__ = _ebss; |
|||
} >RAM |
|||
|
|||
/* User_heap_stack section, used to check that there is enough RAM left */ |
|||
._user_heap_stack : |
|||
{ |
|||
. = ALIGN(8); |
|||
PROVIDE ( end = . ); |
|||
PROVIDE ( _end = . ); |
|||
. = . + _Min_Heap_Size; |
|||
. = . + _Min_Stack_Size; |
|||
. = ALIGN(8); |
|||
} >RAM |
|||
|
|||
|
|||
|
|||
/* Remove information from the standard libraries */ |
|||
/DISCARD/ : |
|||
{ |
|||
libc.a ( * ) |
|||
libm.a ( * ) |
|||
libgcc.a ( * ) |
|||
} |
|||
|
|||
.ARM.attributes 0 : { *(.ARM.attributes) } |
|||
} |
|||
@ -0,0 +1,238 @@ |
|||
/*
|
|||
Copyright (c) 2011 Arduino. All right reserved. |
|||
|
|||
This library is free software; you can redistribute it and/or |
|||
modify it under the terms of the GNU Lesser General Public |
|||
License as published by the Free Software Foundation; either |
|||
version 2.1 of the License, or (at your option) any later version. |
|||
|
|||
This library is distributed in the hope that it will be useful, |
|||
but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. |
|||
See the GNU Lesser General Public License for more details. |
|||
|
|||
You should have received a copy of the GNU Lesser General Public |
|||
License along with this library; if not, write to the Free Software |
|||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
|||
*/ |
|||
|
|||
#include "pins_arduino.h" |
|||
|
|||
#ifdef __cplusplus |
|||
extern "C" { |
|||
#endif |
|||
|
|||
// Digital PinName array
|
|||
const PinName digitalPin[] = { |
|||
PA_0, // Digital pin 0
|
|||
PA_1, // Digital pin 1
|
|||
PA_2, // Digital pin 2
|
|||
PA_3, // Digital pin 3
|
|||
PA_4, // Digital pin 4
|
|||
PA_5, // Digital pin 5
|
|||
PA_6, // Digital pin 6
|
|||
PA_7, // Digital pin 7
|
|||
PA_8, // Digital pin 8
|
|||
PA_9, // Digital pin 9
|
|||
PA_10, // Digital pin 10
|
|||
PA_11, // Digital pin 11
|
|||
PA_12, // Digital pin 12
|
|||
PA_13, // Digital pin 13
|
|||
PA_14, // Digital pin 14
|
|||
PA_15, // Digital pin 15
|
|||
|
|||
PB_0, // Digital pin 16
|
|||
PB_1, // Digital pin 17
|
|||
PB_2, // Digital pin 18
|
|||
PB_3, // Digital pin 19
|
|||
PB_4, // Digital pin 20
|
|||
PB_5, // Digital pin 21
|
|||
PB_6, // Digital pin 22
|
|||
PB_7, // Digital pin 23
|
|||
PB_8, // Digital pin 24
|
|||
PB_9, // Digital pin 25
|
|||
PB_10, // Digital pin 26
|
|||
PB_12, // Digital pin 27
|
|||
PB_13, // Digital pin 28
|
|||
PB_14, // Digital pin 29
|
|||
PB_15, // Digital pin 30
|
|||
|
|||
PC_0, // Digital pin 31
|
|||
PC_1, // Digital pin 32
|
|||
PC_2, // Digital pin 33
|
|||
PC_3, // Digital pin 34
|
|||
PC_4, // Digital pin 35
|
|||
PC_5, // Digital pin 36
|
|||
PC_6, // Digital pin 37
|
|||
PC_7, // Digital pin 38
|
|||
PC_8, // Digital pin 39
|
|||
PC_9, // Digital pin 40
|
|||
PC_10, // Digital pin 41
|
|||
PC_11, // Digital pin 42
|
|||
PC_12, // Digital pin 43
|
|||
PC_13, // Digital pin 44
|
|||
PC_14, // Digital pin 45
|
|||
PC_15, // Digital pin 46
|
|||
|
|||
PD_2, // Digital pin 47
|
|||
|
|||
PH_0, // Digital pin 48, used by the external oscillator
|
|||
PH_1 // Digital pin 49, used by the external oscillator
|
|||
}; |
|||
|
|||
// Analog (Ax) pin number array
|
|||
const uint32_t analogInputPin[] = { |
|||
0, // A0, PA0
|
|||
1, // A1, PA1
|
|||
2, // A2, PA2
|
|||
3, // A3, PA3
|
|||
4, // A4, PA4
|
|||
5, // A5, PA5
|
|||
6, // A6, PA6
|
|||
7, // A7, PA7
|
|||
16, // A8, PB0
|
|||
17, // A9, PB1
|
|||
31, // A10, PC0
|
|||
32, // A11, PC1
|
|||
33, // A12, PC2
|
|||
34, // A13, PC3
|
|||
35, // A14, PC4
|
|||
36 // A15, PC5
|
|||
}; |
|||
|
|||
#ifdef __cplusplus |
|||
} |
|||
#endif |
|||
|
|||
// ----------------------------------------------------------------------------
|
|||
|
|||
#ifdef __cplusplus |
|||
extern "C" { |
|||
#endif |
|||
|
|||
/*
|
|||
* @brief Configures the System clock source, PLL Multiplier and Divider factors, |
|||
* AHB/APBx prescalers and Flash settings |
|||
* @note This function should be called only once the RCC clock configuration |
|||
* is reset to the default reset state (done in SystemInit() function). |
|||
* @param None |
|||
* @retval None |
|||
*/ |
|||
|
|||
/******************************************************************************/ |
|||
/* PLL (clocked by HSE) used as System clock source */ |
|||
/******************************************************************************/ |
|||
static uint8_t SetSysClock_PLL_HSE(uint8_t bypass) |
|||
{ |
|||
RCC_OscInitTypeDef RCC_OscInitStruct; |
|||
RCC_ClkInitTypeDef RCC_ClkInitStruct; |
|||
|
|||
/* The voltage scaling allows optimizing the power consumption when the device is
|
|||
clocked below the maximum system frequency, to update the voltage scaling value |
|||
regarding system frequency refer to product datasheet. */ |
|||
__HAL_RCC_PWR_CLK_ENABLE(); |
|||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2); |
|||
|
|||
// Enable HSE oscillator and activate PLL with HSE as source
|
|||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; |
|||
if (bypass == 0) { |
|||
RCC_OscInitStruct.HSEState = RCC_HSE_ON; // External 8 MHz xtal on OSC_IN/OSC_OUT
|
|||
} else { |
|||
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; // External 8 MHz clock on OSC_IN
|
|||
} |
|||
|
|||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; |
|||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; |
|||
RCC_OscInitStruct.PLL.PLLM = HSE_VALUE / 1000000L; // Expects an 8 MHz external clock by default. Redefine HSE_VALUE if not
|
|||
RCC_OscInitStruct.PLL.PLLN = 336; // VCO output clock = 336 MHz (1 MHz * 336)
|
|||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; // PLLCLK = 84 MHz (336 MHz / 4)
|
|||
RCC_OscInitStruct.PLL.PLLQ = 7; // USB clock = 48 MHz (336 MHz / 7) --> OK for USB
|
|||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { |
|||
return 0; // FAIL
|
|||
} |
|||
|
|||
// Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers
|
|||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; |
|||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 84 MHz
|
|||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 84 MHz
|
|||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; // 42 MHz
|
|||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 84 MHz
|
|||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) { |
|||
return 0; // FAIL
|
|||
} |
|||
|
|||
/* Output clock on MCO1 pin(PA8) for debugging purpose */ |
|||
/*
|
|||
if (bypass == 0) |
|||
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_2); // 4 MHz
|
|||
else |
|||
HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1); // 8 MHz
|
|||
*/ |
|||
|
|||
return 1; // OK
|
|||
} |
|||
|
|||
/******************************************************************************/ |
|||
/* PLL (clocked by HSI) used as System clock source */ |
|||
/******************************************************************************/ |
|||
uint8_t SetSysClock_PLL_HSI(void) |
|||
{ |
|||
RCC_OscInitTypeDef RCC_OscInitStruct; |
|||
RCC_ClkInitTypeDef RCC_ClkInitStruct; |
|||
|
|||
/* The voltage scaling allows optimizing the power consumption when the device is
|
|||
clocked below the maximum system frequency, to update the voltage scaling value |
|||
regarding system frequency refer to product datasheet. */ |
|||
__HAL_RCC_PWR_CLK_ENABLE(); |
|||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2); |
|||
|
|||
// Enable HSI oscillator and activate PLL with HSI as source
|
|||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE; |
|||
RCC_OscInitStruct.HSIState = RCC_HSI_ON; |
|||
RCC_OscInitStruct.HSEState = RCC_HSE_OFF; |
|||
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; |
|||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; |
|||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; |
|||
RCC_OscInitStruct.PLL.PLLM = 16; // VCO input clock = 1 MHz (16 MHz / 16)
|
|||
RCC_OscInitStruct.PLL.PLLN = 336; // VCO output clock = 336 MHz (1 MHz * 336)
|
|||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; // PLLCLK = 84 MHz (336 MHz / 4)
|
|||
RCC_OscInitStruct.PLL.PLLQ = 7; // USB clock = 48 MHz (336 MHz / 7) --> freq is ok but not precise enough
|
|||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { |
|||
return 0; // FAIL
|
|||
} |
|||
|
|||
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ |
|||
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); |
|||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 84 MHz
|
|||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 84 MHz
|
|||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; // 42 MHz
|
|||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 84 MHz
|
|||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) { |
|||
return 0; // FAIL
|
|||
} |
|||
|
|||
/* Output clock on MCO1 pin(PA8) for debugging purpose */ |
|||
//HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz
|
|||
|
|||
return 1; // OK
|
|||
} |
|||
|
|||
WEAK void SystemClock_Config(void) |
|||
{ |
|||
/* 1- If fail try to start with HSE and external xtal */ |
|||
if (SetSysClock_PLL_HSE(0) == 0) { |
|||
/* 2- Try to start with HSE and external clock */ |
|||
if (SetSysClock_PLL_HSE(1) == 0) { |
|||
/* 3- If fail start with HSI clock */ |
|||
if (SetSysClock_PLL_HSI() == 0) { |
|||
Error_Handler(); |
|||
} |
|||
} |
|||
} |
|||
/* Output clock on MCO2 pin(PC9) for debugging purpose */ |
|||
//HAL_RCC_MCOConfig(RCC_MCO2, RCC_MCO2SOURCE_SYSCLK, RCC_MCODIV_4);
|
|||
} |
|||
|
|||
#ifdef __cplusplus |
|||
} |
|||
#endif |
|||
@ -0,0 +1,151 @@ |
|||
/*
|
|||
Copyright (c) 2011 Arduino. All right reserved. |
|||
|
|||
This library is free software; you can redistribute it and/or |
|||
modify it under the terms of the GNU Lesser General Public |
|||
License as published by the Free Software Foundation; either |
|||
version 2.1 of the License, or (at your option) any later version. |
|||
|
|||
This library is distributed in the hope that it will be useful, |
|||
but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. |
|||
See the GNU Lesser General Public License for more details. |
|||
|
|||
You should have received a copy of the GNU Lesser General Public |
|||
License along with this library; if not, write to the Free Software |
|||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
|||
*/ |
|||
|
|||
#ifndef _VARIANT_ARDUINO_STM32_ |
|||
#define _VARIANT_ARDUINO_STM32_ |
|||
|
|||
#ifdef __cplusplus |
|||
extern "C" { |
|||
#endif // __cplusplus
|
|||
|
|||
|
|||
// | DIGITAL | ANALOG | USART | TWI | SPI | SPECIAL |
|
|||
// |---------|--------|-----------|----------|------------------------|-----------|
|
|||
#define PA0 0 // | 0 | A0 | | | | |
|
|||
#define PA1 1 // | 1 | A1 | | | | |
|
|||
#define PA2 2 // | 2 | A2 | USART2_TX | | | |
|
|||
#define PA3 3 // | 3 | A3 | USART2_RX | | | |
|
|||
#define PA4 4 // | 4 | A4 | | | SPI1_SS, (SPI3_SS) | |
|
|||
#define PA5 5 // | 5 | A5 | | | SPI1_SCK | |
|
|||
#define PA6 6 // | 6 | A6 | | | SPI1_MISO | |
|
|||
#define PA7 7 // | 7 | A7 | | | SPI1_MOSI | |
|
|||
#define PA8 8 // | 8 | | | TWI3_SCL | | |
|
|||
#define PA9 9 // | 9 | | USART1_TX | | | |
|
|||
#define PA10 10 // | 10 | | USART1_RX | | | |
|
|||
#define PA11 11 // | 11 | | USART6_TX | | | |
|
|||
#define PA12 12 // | 12 | | USART6_RX | | | |
|
|||
#define PA13 13 // | 13 | | | | | SWD_SWDIO |
|
|||
#define PA14 14 // | 14 | | | | | SWD_SWCLK |
|
|||
#define PA15 15 // | 15 | | | | SPI3_SS, (SPI1_SS) | |
|
|||
// |---------|--------|-----------|----------|------------------------|-----------|
|
|||
#define PB0 16 // | 16 | A8 | | | | |
|
|||
#define PB1 17 // | 17 | A9 | | | | |
|
|||
#define PB2 18 // | 18 | | | | | BOOT1 |
|
|||
#define PB3 19 // | 19 | | | TWI2_SDA | SPI3_SCK, (SPI1_SCK) | |
|
|||
#define PB4 20 // | 20 | | | TWI3_SDA | SPI3_MISO, (SPI1_MISO) | |
|
|||
#define PB5 21 // | 21 | | | | SPI3_MOSI, (SPI1_MOSI) | |
|
|||
#define PB6 22 // | 22 | | USART1_TX | TWI1_SCL | | |
|
|||
#define PB7 23 // | 23 | | USART1_RX | TWI1_SDA | | |
|
|||
#define PB8 24 // | 24 | | | TWI1_SCL | | |
|
|||
#define PB9 25 // | 25 | | | TWI1_SDA | SPI2_SS | |
|
|||
#define PB10 26 // | 26 | | | TWI2_SCL | SPI2_SCK | |
|
|||
#define PB12 27 // | 27 | | | | SPI2_SS | |
|
|||
#define PB13 28 // | 28 | | | | SPI2_SCK | |
|
|||
#define PB14 29 // | 29 | | | | SPI2_MISO | |
|
|||
#define PB15 30 // | 30 | | | | SPI2_MOSI | |
|
|||
// |---------|--------|-----------|----------|------------------------|-----------|
|
|||
#define PC0 31 // | 31 | A10 | | | | |
|
|||
#define PC1 32 // | 32 | A11 | | | | |
|
|||
#define PC2 33 // | 33 | A12 | | | SPI2_MISO | |
|
|||
#define PC3 34 // | 34 | A13 | | | SPI2_MOSI | |
|
|||
#define PC4 35 // | 35 | A14 | | | | |
|
|||
#define PC5 36 // | 36 | A15 | | | | |
|
|||
#define PC6 37 // | 37 | | USART6_TX | | | |
|
|||
#define PC7 38 // | 38 | | USART6_RX | | | |
|
|||
#define PC8 39 // | 39 | | | | | |
|
|||
#define PC9 40 // | 40 | | | TWI3_SDA | | |
|
|||
#define PC10 41 // | 41 | | | | SPI3_SCK | |
|
|||
#define PC11 42 // | 42 | | | | SPI3_MISO | |
|
|||
#define PC12 43 // | 43 | | | | SPI3_MOSI | |
|
|||
#define PC13 44 // | 44 | | | | | |
|
|||
#define PC14 45 // | 45 | | | | | OSC32_IN |
|
|||
#define PC15 46 // | 46 | | | | | OSC32_OUT |
|
|||
// |---------|--------|-----------|----------|------------------------|-----------|
|
|||
#define PD2 47 // | 47 | | | | | |
|
|||
// |---------|--------|-----------|----------|------------------------|-----------|
|
|||
#define PH0 48 // | 48 | | | | | OSC_IN |
|
|||
#define PH1 49 // | 49 | | | | | OSC_OUT |
|
|||
// |---------|--------|-----------|----------|------------------------|-----------|
|
|||
|
|||
// This must be a literal
|
|||
#define NUM_DIGITAL_PINS 50 |
|||
#define NUM_ANALOG_INPUTS 16 |
|||
|
|||
// SPI definitions
|
|||
#define PIN_SPI_SS PA4 |
|||
#define PIN_SPI_SS1 PA4 |
|||
#define PIN_SPI_MOSI PA7 |
|||
#define PIN_SPI_MISO PA6 |
|||
#define PIN_SPI_SCK PA5 |
|||
|
|||
|
|||
// Timer Definitions
|
|||
#define TIMER_TONE TIM2 |
|||
#define TIMER_SERVO TIM5 |
|||
#define TIMER_SERIAL TIM11 |
|||
|
|||
// UART Definitions
|
|||
//#define ENABLE_HWSERIAL1 done automatically by the #define SERIAL_UART_INSTANCE below
|
|||
#define ENABLE_HWSERIAL2 |
|||
|
|||
|
|||
// Define here Serial instance number to map on Serial generic name (if not already used by SerialUSB)
|
|||
#define SERIAL_UART_INSTANCE 1 //1 for Serial = Serial1 (USART1)
|
|||
|
|||
// Default pin used for 'Serial' instance
|
|||
// Mandatory for Firmata
|
|||
#define PIN_SERIAL_RX PA10 |
|||
#define PIN_SERIAL_TX PA9 |
|||
|
|||
// Used when user instanciate a hardware Serial using its peripheral name.
|
|||
// Example: HardwareSerial mySerial(USART3);
|
|||
// will use PIN_SERIAL3_RX and PIN_SERIAL3_TX if defined.
|
|||
#define PIN_SERIAL1_RX PA10 |
|||
#define PIN_SERIAL1_TX PA9 |
|||
#define PIN_SERIAL2_RX PA3 |
|||
#define PIN_SERIAL2_TX PA2 |
|||
|
|||
#ifdef __cplusplus |
|||
} // extern "C"
|
|||
#endif |
|||
/*----------------------------------------------------------------------------
|
|||
* Arduino objects - C++ only |
|||
*----------------------------------------------------------------------------*/ |
|||
|
|||
#ifdef __cplusplus |
|||
// These serial port names are intended to allow libraries and architecture-neutral
|
|||
// sketches to automatically default to the correct port name for a particular type
|
|||
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
|
|||
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
|
|||
//
|
|||
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
|
|||
//
|
|||
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
|
|||
//
|
|||
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
|
|||
//
|
|||
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
|
|||
//
|
|||
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
|
|||
// pins are NOT connected to anything by default.
|
|||
#define SERIAL_PORT_MONITOR Serial |
|||
#define SERIAL_PORT_HARDWARE Serial1 |
|||
#define SERIAL_PORT_HARDWARE_OPEN Serial2 |
|||
#endif |
|||
|
|||
#endif /* _VARIANT_ARDUINO_STM32_ */ |
|||
@ -0,0 +1,20 @@ |
|||
#!/usr/bin/env bash |
|||
# |
|||
# Build tests for STM32F401RC_creality |
|||
# |
|||
|
|||
# exit on first failure |
|||
set -e |
|||
|
|||
use_example_configs "Creality/Ender-3 S1" |
|||
opt_disable DWIN_CREALITY_LCD Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN AUTO_BED_LEVELING_BILINEAR CONFIGURATION_EMBEDDING CANCEL_OBJECTS FWRETRACT |
|||
opt_enable DWIN_LCD_PROUI INDIVIDUAL_AXIS_HOMING_SUBMENU LCD_SET_PROGRESS_MANUALLY STATUS_MESSAGE_SCROLLING \ |
|||
SOUND_MENU_ITEM PRINTCOUNTER NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE FILAMENT_RUNOUT_SENSOR \ |
|||
BLTOUCH Z_SAFE_HOMING AUTO_BED_LEVELING_UBL MESH_EDIT_MENU \ |
|||
LIMITED_MAX_FR_EDITING LIMITED_MAX_ACCEL_EDITING LIMITED_JERK_EDITING BAUD_RATE_GCODE |
|||
opt_set MOTHERBOARD BOARD_CREALITY_V24S1_301F4 \ |
|||
PREHEAT_3_LABEL '"CUSTOM"' PREHEAT_3_TEMP_HOTEND 240 PREHEAT_3_TEMP_BED 60 PREHEAT_3_FAN_SPEED 128 |
|||
exec_test $1 $2 "Ender-3 S1 with ProUI" "$3" |
|||
|
|||
# clean up |
|||
restore_configs |
|||
Loading…
Reference in new issue