Improve menu pause / resume (#12876)

Marlin/src/HAL/HAL_DUE/usb/sd_mmc_spi_mem.cpp

@@ -19,7 +19,7 @@ void sd_mmc_spi_mem_init(void) {
 }
 
 Ctrl_status sd_mmc_spi_test_unit_ready(void) {
-  if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.flag.cardOK)
+  if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isDetected())
     return CTRL_NO_PRESENT;
   return CTRL_GOOD;
 }
@@ -27,7 +27,7 @@ Ctrl_status sd_mmc_spi_test_unit_ready(void) {
 // NOTE: This function is defined as returning the address of the last block
 // in the card, which is cardSize() - 1
 Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector) {
-  if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.flag.cardOK)
+  if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isDetected())
     return CTRL_NO_PRESENT;
   *nb_sector = card.getSd2Card().cardSize() - 1;
   return CTRL_GOOD;
@@ -42,7 +42,7 @@ bool sd_mmc_spi_wr_protect(void) {
 }
 
 bool sd_mmc_spi_removal(void) {
-  if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.flag.cardOK)
+  if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isDetected())
     return true;
   return false;
 }
@@ -61,7 +61,7 @@ uint8_t sector_buf[SD_MMC_BLOCK_SIZE];
 // #define DEBUG_MMC
 
 Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector) {
-  if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.flag.cardOK)
+  if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isDetected())
     return CTRL_NO_PRESENT;
 
   #ifdef DEBUG_MMC
@@ -95,7 +95,7 @@ Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector) {
 }
 
 Ctrl_status sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector) {
-  if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.flag.cardOK)
+  if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isDetected())
     return CTRL_NO_PRESENT;
 
   #ifdef DEBUG_MMC

Marlin/src/HAL/HAL_LPC1768/main.cpp

@@ -106,7 +106,7 @@ void HAL_idletask(void) {
     // the disk if Marlin has it mounted. Unfortuately there is currently no way
     // to unmount the disk from the LCD menu.
     // if (IS_SD_PRINTING() || IS_SD_FILE_OPEN())
-    if (card.flag.cardOK)
+    if (card.isDetected())
       MSC_Aquire_Lock();
     else
       MSC_Release_Lock();

Marlin/src/HAL/HAL_STM32F1/persistent_store_sdcard.cpp

@@ -41,7 +41,7 @@ char HAL_STM32F1_eeprom_content[HAL_STM32F1_EEPROM_SIZE];
 char eeprom_filename[] = "eeprom.dat";
 
 bool PersistentStore::access_start() {
-  if (!card.flag.cardOK) return false;
+  if (!card.isDetected()) return false;
   int16_t bytes_read = 0;
   constexpr char eeprom_zero = 0xFF;
   card.openFile(eeprom_filename, true);
@@ -54,7 +54,7 @@ bool PersistentStore::access_start() {
 }
 
 bool PersistentStore::access_finish() {
-  if (!card.flag.cardOK) return false;
+  if (!card.isDetected()) return false;
   card.openFile(eeprom_filename, true);
   int16_t bytes_written = card.write(HAL_STM32F1_eeprom_content, HAL_STM32F1_EEPROM_SIZE);
   card.closefile();

Marlin/src/feature/power_loss_recovery.cpp

@@ -84,8 +84,8 @@ void PrintJobRecovery::changed() {
  */
 void PrintJobRecovery::check() {
   if (enabled) {
-    if (!card.flag.cardOK) card.initsd();
-    if (card.flag.cardOK) {
+    if (!card.isDetected()) card.initsd();
+    if (card.isDetected()) {
       load();
       if (!valid()) return purge();
       enqueue_and_echo_commands_P(PSTR("M1000 S"));

Marlin/src/gcode/sdcard/M20-M30_M32-M34_M524_M928.cpp

@@ -85,18 +85,26 @@ void GcodeSuite::M23() {
  * M24: Start or Resume SD Print
  */
 void GcodeSuite::M24() {
-  #if ENABLED(PARK_HEAD_ON_PAUSE)
-    resume_print();
-  #endif
 
   #if ENABLED(POWER_LOSS_RECOVERY)
     if (parser.seenval('S')) card.setIndex(parser.value_long());
     if (parser.seenval('T')) print_job_timer.resume(parser.value_long());
   #endif
 
+  #if ENABLED(PARK_HEAD_ON_PAUSE)
+    resume_print();
+  #else
+    if (card.isFileOpen()) {
       card.startFileprint();
       print_job_timer.start();
+    }
+
     ui.reset_status();
+    
+    #ifdef ACTION_ON_RESUME
+      SERIAL_ECHOLNPGM("//action:" ACTION_ON_RESUME);
+    #endif
+  #endif
 }
 
 /**
@@ -106,9 +114,16 @@ void GcodeSuite::M25() {
   #if ENABLED(PARK_HEAD_ON_PAUSE)
     M125();
   #else
-    card.pauseSDPrint();
+    #if ENABLED(SDSUPPORT)
+      if (IS_SD_PRINTING()) card.pauseSDPrint();
+    #endif
+
     print_job_timer.pause();
     ui.reset_status();
+
+    #ifdef ACTION_ON_PAUSE
+      SERIAL_ECHOLNPGM("//action:" ACTION_ON_PAUSE);
+    #endif
   #endif
 }
 
@@ -116,7 +131,7 @@ void GcodeSuite::M25() {
  * M26: Set SD Card file index
  */
 void GcodeSuite::M26() {
-  if (card.flag.cardOK && parser.seenval('S'))
+  if (card.isDetected() && parser.seenval('S'))
     card.setIndex(parser.value_long());
 }
 
@@ -207,7 +222,7 @@ void GcodeSuite::M29() {
  * M30 <filename>: Delete SD Card file
  */
 void GcodeSuite::M30() {
-  if (card.flag.cardOK) {
+  if (card.isDetected()) {
     card.closefile();
     card.removeFile(parser.string_arg);
   }
@@ -226,7 +241,7 @@ void GcodeSuite::M30() {
 void GcodeSuite::M32() {
   if (IS_SD_PRINTING()) planner.synchronize();
 
-  if (card.flag.cardOK) {
+  if (card.isDetected()) {
     const bool call_procedure = parser.boolval('P');
 
     card.openFile(parser.string_arg, true, call_procedure);

Marlin/src/lcd/extensible_ui/ui_api.cpp

@@ -578,7 +578,7 @@ namespace ExtUI {
   }
 
   bool isPrintingFromMedia() {
-    return IFSD(card.flag.cardOK && card.isFileOpen(), false);
+    return IFSD(card.isFileOpen(), false);
   }
 
   bool isPrinting() {
@@ -586,7 +586,7 @@ namespace ExtUI {
   }
 
   bool isMediaInserted() {
-    return IFSD(IS_SD_INSERTED() && card.flag.cardOK, false);
+    return IFSD(IS_SD_INSERTED() && card.isDetected(), false);
   }
 
   void pausePrint() {
@@ -703,13 +703,13 @@ void MarlinUI::update() {
       last_sd_status = sd_status;
       if (sd_status) {
         card.initsd();
-        if (card.flag.cardOK)
+        if (card.isDetected())
           ExtUI::onMediaInserted();
         else
           ExtUI::onMediaError();
       }
       else {
-        const bool ok = card.flag.cardOK;
+        const bool ok = card.isDetected();
         card.release();
         if (ok) ExtUI::onMediaRemoved();
       }

Marlin/src/lcd/malyanlcd.cpp

@@ -330,7 +330,7 @@ void process_lcd_s_command(const char* command) {
 
     case 'L': {
       #if ENABLED(SDSUPPORT)
-        if (!card.flag.cardOK) card.initsd();
+        if (!card.isDetected()) card.initsd();
 
         // A more efficient way to do this would be to
         // implement a callback in the ls_SerialPrint code, but

Marlin/src/lcd/menu/menu_main.cpp

@@ -30,10 +30,6 @@
 
 #include "menu.h"
 #include "../../module/temperature.h"
-
-#if ENABLED(SDSUPPORT)
-
-  #include "../../sd/cardreader.h"
 #include "../../gcode/queue.h"
 #include "../../module/printcounter.h"
 
@@ -41,23 +37,32 @@
   #include "../../feature/power_loss_recovery.h"
 #endif
 
-  void lcd_sdcard_pause() {
+void lcd_pause() {
   #if ENABLED(POWER_LOSS_RECOVERY)
     if (recovery.enabled) recovery.save(true, false);
   #endif
+
+  #if ENABLED(PARK_HEAD_ON_PAUSE)
+    pause_print(PAUSE_PARK_RETRACT_LENGTH, NOZZLE_PARK_POINT, 0, true);
+  #elif ENABLED(SDSUPPORT)
     enqueue_and_echo_commands_P(PSTR("M25"));
+  #elif defined(ACTION_ON_PAUSE)
+    SERIAL_ECHOLNPGM("//action:" ACTION_ON_PAUSE);
+  #endif
 }
 
-  void lcd_sdcard_resume() {
-    #if ENABLED(PARK_HEAD_ON_PAUSE)
-      enqueue_and_echo_commands_P(PSTR("M24"));
-    #else
-      card.startFileprint();
-      print_job_timer.start();
-      ui.reset_status();
+void lcd_resume() {
+  #if ENABLED(SDSUPPORT)
+    if (card.isPaused()) enqueue_and_echo_commands_P(PSTR("M24"));
+  #elif ENABLED(ACTION_ON_RESUME)
+    SERIAL_ECHOLNPGM("//action:" ACTION_ON_RESUME);
   #endif
 }
 
+#if ENABLED(SDSUPPORT)
+
+  #include "../../sd/cardreader.h"
+
   void lcd_sdcard_stop() {
     wait_for_heatup = wait_for_user = false;
     card.flag.abort_sd_printing = true;
@@ -88,35 +93,18 @@ void menu_main() {
   START_MENU();
   MENU_BACK(MSG_WATCH);
 
-  #if ENABLED(SDSUPPORT)
-    if (card.flag.cardOK) {
-      if (card.isFileOpen()) {
-        if (IS_SD_PRINTING())
-          MENU_ITEM(function, MSG_PAUSE_PRINT, lcd_sdcard_pause);
-        else
-          MENU_ITEM(function, MSG_RESUME_PRINT, lcd_sdcard_resume);
+  const bool busy = printer_busy();
 
-        MENU_ITEM(submenu, MSG_STOP_PRINT, menu_sdcard_abort_confirm);
-      }
-      else {
-        MENU_ITEM(submenu, MSG_CARD_MENU, menu_sdcard);
-        #if !PIN_EXISTS(SD_DETECT)
-          MENU_ITEM(gcode, MSG_CHANGE_SDCARD, PSTR("M21"));  // SD-card changed by user
-        #endif
-      }
+  if (busy) {
+    MENU_ITEM(function, MSG_PAUSE_PRINT, lcd_pause);
+    MENU_ITEM(submenu, MSG_TUNE, menu_tune);
   }
   else {
-      MENU_ITEM(function, MSG_NO_CARD, NULL);
-      #if !PIN_EXISTS(SD_DETECT)
-        MENU_ITEM(gcode, MSG_INIT_SDCARD, PSTR("M21")); // Manually initialize the SD-card via user interface
+    MENU_ITEM(function, MSG_RESUME_PRINT, lcd_resume);
+    #if ENABLED(SDSUPPORT)
+      if (card.isFileOpen())
+        MENU_ITEM(submenu, MSG_STOP_PRINT, menu_sdcard_abort_confirm);
     #endif
-    }
-  #endif // SDSUPPORT
-
-  const bool busy = printer_busy();
-  if (busy)
-    MENU_ITEM(submenu, MSG_TUNE, menu_tune);
-  else {
     MENU_ITEM(submenu, MSG_MOTION, menu_motion);
     MENU_ITEM(submenu, MSG_TEMPERATURE, menu_temperature);
   }
@@ -164,6 +152,20 @@ void menu_main() {
       MENU_ITEM(function, MSG_AUTOSTART, card.beginautostart);
   #endif
 
+#if ENABLED(SDSUPPORT)
+    if (card.isDetected() && !card.isFileOpen()) {
+      MENU_ITEM(submenu, MSG_CARD_MENU, menu_sdcard);
+      #if !PIN_EXISTS(SD_DETECT)
+        MENU_ITEM(gcode, MSG_CHANGE_SDCARD, PSTR("M21"));  // SD-card changed by user
+      #endif
+    }
+    else {
+      MENU_ITEM(function, MSG_NO_CARD, NULL);
+      #if !PIN_EXISTS(SD_DETECT)
+        MENU_ITEM(gcode, MSG_INIT_SDCARD, PSTR("M21")); // Manually initialize the SD-card via user interface
+      #endif
+    }
+  #endif
   END_MENU();
 }
 

Marlin/src/lcd/menu/menu_sdcard.cpp

@@ -111,7 +111,7 @@ void menu_sdcard() {
       MENU_ITEM(function, LCD_STR_REFRESH MSG_REFRESH, lcd_sd_refresh);
     #endif
   }
-  else if (card.flag.cardOK)
+  else if (card.isDetected())
     MENU_ITEM(function, LCD_STR_FOLDER "..", lcd_sd_updir);
 
   if (ui.should_draw()) for (uint16_t i = 0; i < fileCnt; i++) {

Marlin/src/sd/cardreader.cpp

@@ -124,7 +124,7 @@ CardReader::CardReader() {
       //sort_reverse = false;
     #endif
   #endif
-  flag.sdprinting = flag.cardOK = flag.saving = flag.logging = false;
+  flag.sdprinting = flag.detected = flag.saving = flag.logging = false;
   filesize = sdpos = 0;
   file_subcall_ctr = 0;
 
@@ -360,7 +360,7 @@ void CardReader::printFilename(
 }
 
 void CardReader::initsd() {
-  flag.cardOK = false;
+  flag.detected = false;
   if (root.isOpen()) root.close();
 
   #ifndef SPI_SPEED
@@ -380,7 +380,7 @@ void CardReader::initsd() {
   else if (!root.openRoot(&volume))
     SERIAL_ERROR_MSG(MSG_SD_OPENROOT_FAIL);
   else {
-    flag.cardOK = true;
+    flag.detected = true;
     SERIAL_ECHO_MSG(MSG_SD_CARD_OK);
   }
   setroot();
@@ -390,7 +390,7 @@ void CardReader::initsd() {
 
 void CardReader::release() {
   stopSDPrint();
-  flag.cardOK = false;
+  flag.detected = false;
 }
 
 void CardReader::openAndPrintFile(const char *name) {
@@ -402,7 +402,7 @@ void CardReader::openAndPrintFile(const char *name) {
 }
 
 void CardReader::startFileprint() {
-  if (flag.cardOK) {
+  if (isDetected()) {
     flag.sdprinting = true;
     #if SD_RESORT
       flush_presort();
@@ -452,7 +452,7 @@ void CardReader::getAbsFilename(char *t) {
 
 void CardReader::openFile(char * const path, const bool read, const bool subcall/*=false*/) {
 
-  if (!flag.cardOK) return;
+  if (!isDetected()) return;
 
   uint8_t doing = 0;
   if (isFileOpen()) {                     // Replacing current file or doing a subroutine
@@ -535,7 +535,7 @@ void CardReader::openFile(char * const path, const bool read, const bool subcall
 }
 
 void CardReader::removeFile(const char * const name) {
-  if (!flag.cardOK) return;
+  if (!isDetected()) return;
 
   //stopSDPrint();
 
@@ -561,7 +561,7 @@ void CardReader::report_status(
     const int8_t port/*= -1*/
   #endif
 ) {
-  if (flag.cardOK && flag.sdprinting) {
+  if (isPrinting()) {
     SERIAL_ECHOPGM_P(port, MSG_SD_PRINTING_BYTE);
     SERIAL_ECHO_P(port, sdpos);
     SERIAL_CHAR_P(port, '/');
@@ -600,9 +600,9 @@ void CardReader::checkautostart() {
 
   if (autostart_index < 0 || flag.sdprinting) return;
 
-  if (!flag.cardOK) initsd();
+  if (!isDetected()) initsd();
 
-  if (flag.cardOK
+  if (isDetected()
     #if ENABLED(POWER_LOSS_RECOVERY)
       && !recovery.valid() // Don't run auto#.g when a resume file exists
     #endif
@@ -1065,7 +1065,7 @@ void CardReader::printingHasFinished() {
   }
 
   void CardReader::openJobRecoveryFile(const bool read) {
-    if (!flag.cardOK) return;
+    if (!isDetected()) return;
     if (recovery.file.isOpen()) return;
     if (!recovery.file.open(&root, job_recovery_file_name, read ? O_READ : O_CREAT | O_WRITE | O_TRUNC | O_SYNC)) {
       SERIAL_ECHOPAIR(MSG_SD_OPEN_FILE_FAIL, job_recovery_file_name);

Marlin/src/sd/cardreader.h

@@ -39,7 +39,7 @@ typedef struct {
   bool saving:1,
        logging:1,
        sdprinting:1,
-       cardOK:1,
+       detected:1,
        filenameIsDir:1,
        abort_sd_printing:1
        #if ENABLED(FAST_FILE_TRANSFER)
@@ -127,7 +127,10 @@ public:
   #endif
 
   static inline void pauseSDPrint() { flag.sdprinting = false; }
-  static inline bool isFileOpen() { return file.isOpen(); }
+  static inline bool isDetected() { return flag.detected; }
+  static inline bool isFileOpen() { return isDetected() && file.isOpen(); }
+  static inline bool isPaused() { return isFileOpen() && !flag.sdprinting; }
+  static inline bool isPrinting() { return flag.sdprinting; }
   static inline bool eof() { return sdpos >= filesize; }
   static inline int16_t get() { sdpos = file.curPosition(); return (int16_t)file.read(); }
   static inline void setIndex(const uint32_t index) { sdpos = index; file.seekSet(index); }