Combine "XYZ" with MSG_LEVEL_BED_HOMING

Marlin/language_an.h

@@ -42,7 +42,7 @@
 #define MSG_AUTOSTART                       " Autostart"
 #define MSG_DISABLE_STEPPERS                "Amortar motors"
 #define MSG_AUTO_HOME                       "Levar a l'orichen"
-#define MSG_LEVEL_BED_HOMING                "Homing"
+#define MSG_LEVEL_BED_HOMING                "Homing XYZ"
 #define MSG_SET_HOME_OFFSETS                "Set home offsets"
 #define MSG_SET_ORIGIN                      "Establir zero"
 #define MSG_PREHEAT_PLA                     "Precalentar PLA"

Marlin/language_bg.h

@@ -42,7 +42,7 @@
 #define MSG_AUTOSTART                       "Автостарт"
 #define MSG_DISABLE_STEPPERS                "Изкл. двигатели"
 #define MSG_AUTO_HOME                       "Паркиране"
-#define MSG_LEVEL_BED_HOMING                "Homing"
+#define MSG_LEVEL_BED_HOMING                "Homing XYZ"
 #define MSG_SET_HOME_OFFSETS                "Задай Начало"
 #define MSG_SET_ORIGIN                      "Изходна точка"
 #define MSG_PREHEAT_PLA                     "Подгряване PLA"

Marlin/language_ca.h

@@ -43,7 +43,7 @@
 #define MSG_AUTOSTART                       "Inici automatic"
 #define MSG_DISABLE_STEPPERS                "Apagar motors"
 #define MSG_AUTO_HOME                       "Home global"
-#define MSG_LEVEL_BED_HOMING                "Homing"
+#define MSG_LEVEL_BED_HOMING                "Homing XYZ"
 #define MSG_SET_HOME_OFFSETS                "Set home offsets"
 #define MSG_SET_ORIGIN                      "Establir origen"
 #define MSG_PREHEAT_PLA                     "Preescalfar PLA"

Marlin/language_cn.h

@@ -40,7 +40,7 @@
 #define MSG_AUTOSTART                       "\xb1\xb2\xb3\xb4"
 #define MSG_DISABLE_STEPPERS                "\xb5\xb6\xb7\xb8\xb9\xba"
 #define MSG_AUTO_HOME                       "\xbb\xbc\xbd"
-#define MSG_LEVEL_BED_HOMING                "Homing"
+#define MSG_LEVEL_BED_HOMING                "Homing XYZ"
 #define MSG_SET_HOME_OFFSETS                "\xbe\xbf\xbb\xbc\xbd\xc0\xc1"
 #define MSG_SET_ORIGIN                      "\xbe\xbf\xbc\xbd"
 #define MSG_PREHEAT_PLA                     "\xc3\xc4 PLA"

Marlin/language_da.h

@@ -43,7 +43,7 @@
 #define MSG_AUTO_HOME                       "Home" // G28
 #define MSG_COOLDOWN                        "Afkøl"
 #define MSG_DISABLE_STEPPERS                "Slå stepper fra"
-#define MSG_LEVEL_BED_HOMING                "Homing"
+#define MSG_LEVEL_BED_HOMING                "Homing XYZ"
 #define MSG_SET_HOME_OFFSETS                "Sæt home offsets"
 #define MSG_SET_ORIGIN                      "Sæt origin"
 #define MSG_SWITCH_PS_ON                    "Slå strøm til"

Marlin/language_de.h

@@ -42,7 +42,7 @@
 #define MSG_AUTOSTART                       "Autostart"
 #define MSG_DISABLE_STEPPERS                "Motoren Aus" // M84
 #define MSG_AUTO_HOME                       "Home" // G28
-#define MSG_LEVEL_BED_HOMING                "Homing"
+#define MSG_LEVEL_BED_HOMING                "Homing XYZ"
 #define MSG_SET_HOME_OFFSETS                "Setze Home hier"
 #define MSG_SET_ORIGIN                      "Setze Null hier" //"G92 X0 Y0 Z0" commented out in ultralcd.cpp
 #define MSG_PREHEAT_PLA                     "Vorwärmen PLA"

Marlin/language_en.h

@@ -62,7 +62,7 @@
   #define MSG_AUTO_HOME                       "Auto home"
 #endif
 #ifndef MSG_LEVEL_BED_HOMING
-  #define MSG_LEVEL_BED_HOMING                "Homing"
+  #define MSG_LEVEL_BED_HOMING                "Homing XYZ"
 #endif
 #ifndef MSG_SET_HOME_OFFSETS
   #define MSG_SET_HOME_OFFSETS                "Set home offsets"

Marlin/language_es.h

@@ -42,7 +42,7 @@
 #define MSG_AUTOSTART                       "Autostart"
 #define MSG_DISABLE_STEPPERS                "Apagar motores"
 #define MSG_AUTO_HOME                       "Llevar al origen"
-#define MSG_LEVEL_BED_HOMING                "Homing"
+#define MSG_LEVEL_BED_HOMING                "Homing XYZ"
 #define MSG_SET_HOME_OFFSETS                "Ajustar offsets"
 #define MSG_SET_ORIGIN                      "Establecer cero"
 #define MSG_PREHEAT_PLA                     "Precalentar PLA"

Marlin/language_eu.h

@@ -42,7 +42,7 @@
 #define MSG_AUTOSTART                       "Auto hasiera"
 #define MSG_DISABLE_STEPPERS                "Itzali motoreak"
 #define MSG_AUTO_HOME                       "Hasierara joan"
-#define MSG_LEVEL_BED_HOMING                "Homing"
+#define MSG_LEVEL_BED_HOMING                "Homing XYZ"
 #define MSG_SET_HOME_OFFSETS                "Set home offsets"
 #define MSG_SET_ORIGIN                      "Hasiera ipini"
 #define MSG_PREHEAT_PLA                     "Aurreberotu PLA"

Marlin/language_fi.h

@@ -42,7 +42,7 @@
 #define MSG_AUTOSTART                       "Automaatti"
 #define MSG_DISABLE_STEPPERS                "Vapauta moottorit"
 #define MSG_AUTO_HOME                       "Aja referenssiin"
-#define MSG_LEVEL_BED_HOMING                "Homing"
+#define MSG_LEVEL_BED_HOMING                "Homing XYZ"
 #define MSG_SET_HOME_OFFSETS                "Set home offsets"
 #define MSG_SET_ORIGIN                      "Aseta origo"
 #define MSG_PREHEAT_PLA                     "Esilämmitä PLA"

Marlin/language_fr.h

@@ -43,7 +43,7 @@
 #define MSG_AUTOSTART                       "Demarrage auto"
 #define MSG_DISABLE_STEPPERS                "Arreter moteurs"
 #define MSG_AUTO_HOME                       "Home auto."
-#define MSG_LEVEL_BED_HOMING                "Homing"
+#define MSG_LEVEL_BED_HOMING                "Homing XYZ"
 #define MSG_SET_HOME_OFFSETS                "Set home offsets"
 #define MSG_SET_ORIGIN                      "Regler origine"
 #define MSG_PREHEAT_PLA                     "Prechauffage PLA"

Marlin/language_it.h

@@ -42,7 +42,7 @@
 #define MSG_AUTOSTART                       "Autostart"
 #define MSG_DISABLE_STEPPERS                "Disabilita Motori"
 #define MSG_AUTO_HOME                       "Auto Home"
-#define MSG_LEVEL_BED_HOMING                "Homing"
+#define MSG_LEVEL_BED_HOMING                "Homing XYZ"
 #define MSG_SET_HOME_OFFSETS                "Setta offset home"
 #define MSG_SET_ORIGIN                      "Imposta Origine"
 #define MSG_PREHEAT_PLA                     "Preriscalda PLA"

Marlin/language_kana.h

@@ -44,7 +44,7 @@
 #define MSG_AUTOSTART                       "\xbc\xde\xc4\xde\xb3\xb6\xb2\xbc"                             // "Autostart"
 #define MSG_DISABLE_STEPPERS                "\xd3\xb0\xc0\xb0\xc3\xde\xdd\xb9\xde\xdd\x20\xb5\xcc"         // "Disable steppers"
 #define MSG_AUTO_HOME                       "\xb9\xde\xdd\xc3\xdd\xc6\xb2\xc4\xde\xb3"                     // "Auto home"
-#define MSG_LEVEL_BED_HOMING                "\xb9\xde\xdd\xc3\xdd\xc6\xb2\xc4\xde\xb3"                     // "Homing"
+#define MSG_LEVEL_BED_HOMING                "\xb9\xde\xdd\xc3\xdd\xc6\xb2\xc4\xde\xb3"                     // "Homing XYZ"
 #define MSG_SET_HOME_OFFSETS                "\xb7\xbc\xde\xad\xdd\xb5\xcc\xbe\xaf\xc4\xbe\xaf\xc3\xb2"     // "Set home offsets"
 #define MSG_SET_ORIGIN                      "\xb7\xbc\xde\xad\xdd\xbe\xaf\xc4"                             // "Set origin"
 #define MSG_PREHEAT_PLA                     "PLA \xd6\xc8\xc2"                                             // "Preheat PLA"

Marlin/language_nl.h

@@ -42,7 +42,7 @@
 #define MSG_AUTOSTART                       "Autostart"
 #define MSG_DISABLE_STEPPERS                "Motoren uit"
 #define MSG_AUTO_HOME                       "Auto home"
-#define MSG_LEVEL_BED_HOMING                "Homing"
+#define MSG_LEVEL_BED_HOMING                "Homing XYZ"
 #define MSG_SET_HOME_OFFSETS                "Set home offsets"
 #define MSG_SET_ORIGIN                      "Nulpunt instellen"
 #define MSG_PREHEAT_PLA                     "PLA voorverwarmen"

Marlin/language_pl.h

@@ -42,7 +42,7 @@
 #define MSG_AUTOSTART                       "Autostart"
 #define MSG_DISABLE_STEPPERS                "Wylacz silniki"
 #define MSG_AUTO_HOME                       "Auto. poz. zerowa"
-#define MSG_LEVEL_BED_HOMING                "Homing"
+#define MSG_LEVEL_BED_HOMING                "Homing XYZ"
 #define MSG_SET_HOME_OFFSETS                "Set home offsets"
 #define MSG_SET_ORIGIN                      "Ustaw punkt zero"
 #define MSG_PREHEAT_PLA                     "Rozgrzej PLA"

Marlin/language_pt-br.h

@@ -42,7 +42,7 @@
 #define MSG_AUTOSTART                       "Autostart"
 #define MSG_DISABLE_STEPPERS                "Desabi. motores"
 #define MSG_AUTO_HOME                       "Ir para origen"
-#define MSG_LEVEL_BED_HOMING                "Homing"
+#define MSG_LEVEL_BED_HOMING                "Homing XYZ"
 #define MSG_SET_HOME_OFFSETS                "Ajustar Jogo"
 #define MSG_SET_ORIGIN                      "Ajustar orig."
 #define MSG_PREHEAT_PLA                     "Pre-aquecer PLA"

Marlin/language_ru.h

@@ -42,7 +42,7 @@
 #define MSG_AUTOSTART                       "Автостарт"
 #define MSG_DISABLE_STEPPERS                "Выкл. двигатели"
 #define MSG_AUTO_HOME                       "Парковка"
-#define MSG_LEVEL_BED_HOMING                "Homing"
+#define MSG_LEVEL_BED_HOMING                "Homing XYZ"
 #define MSG_SET_HOME_OFFSETS                "Запомнить парковку"
 #define MSG_SET_ORIGIN                      "Запомнить ноль"
 #define MSG_PREHEAT_PLA                     "Преднагрев PLA"

Marlin/ultralcd.cpp

@@ -2494,7 +2494,7 @@ char* ftostr52(const float& x) {
    * MBL Move to mesh starting point
    */
   static void _lcd_level_bed_homing() {
-    if (lcdDrawUpdate) lcd_implementation_drawedit(PSTR("XYZ " MSG_LEVEL_BED_HOMING), NULL);
+    if (lcdDrawUpdate) lcd_implementation_drawedit(PSTR(MSG_LEVEL_BED_HOMING), NULL);
     lcdDrawUpdate = 1;
     if (axis_known_position[X_AXIS] && axis_known_position[Y_AXIS] && axis_known_position[Z_AXIS]) {
       current_position[Z_AXIS] = MESH_HOME_SEARCH_Z;