Browse Source

Merge pull request #2075 from thinkyhead/mendel_inverting

Use Mendel default for INVERT_Y_DIR
pull/1/head
Scott Lahteine 10 years ago
parent
commit
a366e57385
  1. 2
      Marlin/Configuration.h
  2. 2
      Marlin/configurator/config/Configuration.h
  3. 2
      Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
  4. 1
      Marlin/example_configurations/makibox/Configuration.h

2
Marlin/Configuration.h

@ -357,7 +357,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
#define INVERT_Y_DIR false
#define INVERT_Y_DIR true
#define INVERT_Z_DIR false
// @section extruder

2
Marlin/configurator/config/Configuration.h

@ -357,7 +357,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
#define INVERT_Y_DIR false
#define INVERT_Y_DIR true
#define INVERT_Z_DIR false
// @section extruder

2
Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@ -357,7 +357,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false
#define INVERT_Y_DIR false
#define INVERT_Y_DIR true
#define INVERT_Z_DIR false
// @section extruder

1
Marlin/example_configurations/makibox/Configuration.h

@ -327,6 +327,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
#define INVERT_X_DIR false
#define INVERT_Y_DIR false
#define INVERT_Z_DIR false
#define INVERT_E0_DIR true
#define INVERT_E1_DIR false
#define INVERT_E2_DIR false

Loading…
Cancel
Save