Browse Source

Macrofy attachInterrupt

pull/1/head
Scott Lahteine 5 years ago
parent
commit
a06010e08a
  1. 67
      Marlin/src/HAL/HAL_AVR/endstop_interrupts.h
  2. 23
      Marlin/src/HAL/HAL_DUE/endstop_interrupts.h
  3. 23
      Marlin/src/HAL/HAL_ESP32/endstop_interrupts.h
  4. 45
      Marlin/src/HAL/HAL_LPC1768/endstop_interrupts.h
  5. 28
      Marlin/src/HAL/HAL_TEENSY31_32/endstop_interrupts.h
  6. 23
      Marlin/src/HAL/HAL_TEENSY35_36/endstop_interrupts.h

67
Marlin/src/HAL/HAL_AVR/endstop_interrupts.h

@ -103,152 +103,123 @@ void pciSetup(const int8_t pin) {
#endif
void setup_endstop_interrupts(void) {
#define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
#if HAS_X_MAX
#if (digitalPinToInterrupt(X_MAX_PIN) != NOT_AN_INTERRUPT) // if pin has an external interrupt
attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE); // assign it
#if (digitalPinToInterrupt(X_MAX_PIN) != NOT_AN_INTERRUPT)
_ATTACH(X_MAX_PIN);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(X_MAX_PIN), "X_MAX_PIN is not interrupt-capable"); // if pin has no pin change interrupt - error
pciSetup(X_MAX_PIN); // assign it
static_assert(digitalPinToPCICR(X_MAX_PIN), "X_MAX_PIN is not interrupt-capable");
pciSetup(X_MAX_PIN);
#endif
#endif
#if HAS_X_MIN
#if (digitalPinToInterrupt(X_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(X_MIN_PIN);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(X_MIN_PIN), "X_MIN_PIN is not interrupt-capable");
pciSetup(X_MIN_PIN);
#endif
#endif
#if HAS_Y_MAX
#if (digitalPinToInterrupt(Y_MAX_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE);
_ATTACH(Y_MAX_PIN);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Y_MAX_PIN), "Y_MAX_PIN is not interrupt-capable");
pciSetup(Y_MAX_PIN);
#endif
#endif
#if HAS_Y_MIN
#if (digitalPinToInterrupt(Y_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(Y_MIN_PIN);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Y_MIN_PIN), "Y_MIN_PIN is not interrupt-capable");
pciSetup(Y_MIN_PIN);
#endif
#endif
#if HAS_Z_MAX
#if (digitalPinToInterrupt(Z_MAX_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE);
_ATTACH(Z_MAX_PIN);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z_MAX_PIN), "Z_MAX_PIN is not interrupt-capable");
pciSetup(Z_MAX_PIN);
#endif
#endif
#if HAS_Z_MIN
#if (digitalPinToInterrupt(Z_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(Z_MIN_PIN);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z_MIN_PIN), "Z_MIN_PIN is not interrupt-capable");
pciSetup(Z_MIN_PIN);
#endif
#endif
#if HAS_X2_MAX
#if (digitalPinToInterrupt(X2_MAX_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(X2_MAX_PIN), endstop_ISR, CHANGE);
_ATTACH(X2_MAX_PIN);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(X2_MAX_PIN), "X2_MAX_PIN is not interrupt-capable");
pciSetup(X2_MAX_PIN);
#endif
#endif
#if HAS_X2_MIN
#if (digitalPinToInterrupt(X2_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(X2_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(X2_MIN_PIN);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(X2_MIN_PIN), "X2_MIN_PIN is not interrupt-capable");
pciSetup(X2_MIN_PIN);
#endif
#endif
#if HAS_Y2_MAX
#if (digitalPinToInterrupt(Y2_MAX_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Y2_MAX_PIN), endstop_ISR, CHANGE);
_ATTACH(Y2_MAX_PIN);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Y2_MAX_PIN), "Y2_MAX_PIN is not interrupt-capable");
pciSetup(Y2_MAX_PIN);
#endif
#endif
#if HAS_Y2_MIN
#if (digitalPinToInterrupt(Y2_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Y2_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(Y2_MIN_PIN);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Y2_MIN_PIN), "Y2_MIN_PIN is not interrupt-capable");
pciSetup(Y2_MIN_PIN);
#endif
#endif
#if HAS_Z2_MAX
#if (digitalPinToInterrupt(Z2_MAX_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE);
_ATTACH(Z2_MAX_PIN);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z2_MAX_PIN), "Z2_MAX_PIN is not interrupt-capable");
pciSetup(Z2_MAX_PIN);
#endif
#endif
#if HAS_Z2_MIN
#if (digitalPinToInterrupt(Z2_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(Z2_MIN_PIN);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z2_MIN_PIN), "Z2_MIN_PIN is not interrupt-capable");
pciSetup(Z2_MIN_PIN);
#endif
#endif
#if HAS_Z3_MAX
#if (digitalPinToInterrupt(Z3_MAX_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z3_MAX_PIN), endstop_ISR, CHANGE);
_ATTACH(Z3_MAX_PIN);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z3_MAX_PIN), "Z3_MAX_PIN is not interrupt-capable");
pciSetup(Z3_MAX_PIN);
#endif
#endif
#if HAS_Z3_MIN
#if (digitalPinToInterrupt(Z3_MIN_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z3_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(Z3_MIN_PIN);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z3_MIN_PIN), "Z3_MIN_PIN is not interrupt-capable");
pciSetup(Z3_MIN_PIN);
#endif
#endif
#if HAS_Z_MIN_PROBE_PIN
#if (digitalPinToInterrupt(Z_MIN_PROBE_PIN) != NOT_AN_INTERRUPT)
attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE);
_ATTACH(Z_MIN_PROBE_PIN);
#else
// Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
static_assert(digitalPinToPCICR(Z_MIN_PROBE_PIN), "Z_MIN_PROBE_PIN is not interrupt-capable");
pciSetup(Z_MIN_PROBE_PIN);
#endif

23
Marlin/src/HAL/HAL_DUE/endstop_interrupts.h

@ -46,37 +46,38 @@ void endstop_ISR(void) { endstops.update(); }
*/
void setup_endstop_interrupts(void) {
#define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
#if HAS_X_MAX
attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE); // assign it
_ATTACH(X_MAX_PIN);
#endif
#if HAS_X_MIN
attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(X_MIN_PIN);
#endif
#if HAS_Y_MAX
attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE);
_ATTACH(Y_MAX_PIN);
#endif
#if HAS_Y_MIN
attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(Y_MIN_PIN);
#endif
#if HAS_Z_MAX
attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE);
_ATTACH(Z_MAX_PIN);
#endif
#if HAS_Z_MIN
attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(Z_MIN_PIN);
#endif
#if HAS_Z2_MAX
attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE);
_ATTACH(Z2_MAX_PIN);
#endif
#if HAS_Z2_MIN
attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(Z2_MIN_PIN);
#endif
#if HAS_Z3_MAX
attachInterrupt(digitalPinToInterrupt(Z3_MAX_PIN), endstop_ISR, CHANGE);
_ATTACH(Z3_MAX_PIN);
#endif
#if HAS_Z3_MIN
attachInterrupt(digitalPinToInterrupt(Z3_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(Z3_MIN_PIN);
#endif
#if HAS_Z_MIN_PROBE_PIN
attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE);
_ATTACH(Z_MIN_PROBE_PIN);
#endif
}

23
Marlin/src/HAL/HAL_ESP32/endstop_interrupts.h

@ -41,37 +41,38 @@
void ICACHE_RAM_ATTR endstop_ISR(void) { endstops.update(); }
void setup_endstop_interrupts(void) {
#define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
#if HAS_X_MAX
attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE);
_ATTACH(X_MAX_PIN);
#endif
#if HAS_X_MIN
attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(X_MIN_PIN);
#endif
#if HAS_Y_MAX
attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE);
_ATTACH(Y_MAX_PIN);
#endif
#if HAS_Y_MIN
attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(Y_MIN_PIN);
#endif
#if HAS_Z_MAX
attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE);
_ATTACH(Z_MAX_PIN);
#endif
#if HAS_Z_MIN
attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(Z_MIN_PIN);
#endif
#if HAS_Z2_MAX
attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE);
_ATTACH(Z2_MAX_PIN);
#endif
#if HAS_Z2_MIN
attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(Z2_MIN_PIN);
#endif
#if HAS_Z3_MAX
attachInterrupt(digitalPinToInterrupt(Z3_MAX_PIN), endstop_ISR, CHANGE);
_ATTACH(Z3_MAX_PIN);
#endif
#if HAS_Z3_MIN
attachInterrupt(digitalPinToInterrupt(Z3_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(Z3_MIN_PIN);
#endif
#if HAS_Z_MIN_PROBE_PIN
attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE);
_ATTACH(Z_MIN_PROBE_PIN);
#endif
}

45
Marlin/src/HAL/HAL_LPC1768/endstop_interrupts.h

@ -41,70 +41,71 @@
void endstop_ISR(void) { endstops.update(); }
void setup_endstop_interrupts(void) {
#define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
#if HAS_X_MAX
#if !LPC1768_PIN_INTERRUPT_M(X_MAX_PIN)
#error "X_MAX_PIN is not an INTERRUPT capable pin."
#error "X_MAX_PIN is not INTERRUPT-capable."
#endif
attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE);
_ATTACH(X_MAX_PIN);
#endif
#if HAS_X_MIN
#if !LPC1768_PIN_INTERRUPT_M(X_MIN_PIN)
#error "X_MIN_PIN is not an INTERRUPT capable pin."
#error "X_MIN_PIN is not INTERRUPT-capable."
#endif
attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(X_MIN_PIN);
#endif
#if HAS_Y_MAX
#if !LPC1768_PIN_INTERRUPT_M(Y_MAX_PIN)
#error "Y_MAX_PIN is not an INTERRUPT capable pin."
#error "Y_MAX_PIN is not INTERRUPT-capable."
#endif
attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE);
_ATTACH(Y_MAX_PIN);
#endif
#if HAS_Y_MIN
#if !LPC1768_PIN_INTERRUPT_M(Y_MIN_PIN)
#error "Y_MIN_PIN is not an INTERRUPT capable pin."
#error "Y_MIN_PIN is not INTERRUPT-capable."
#endif
attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(Y_MIN_PIN);
#endif
#if HAS_Z_MAX
#if !LPC1768_PIN_INTERRUPT_M(Z_MAX_PIN)
#error "Z_MAX_PIN is not an INTERRUPT capable pin."
#error "Z_MAX_PIN is not INTERRUPT-capable."
#endif
attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE);
_ATTACH(Z_MAX_PIN);
#endif
#if HAS_Z_MIN
#if !LPC1768_PIN_INTERRUPT_M(Z_MIN_PIN)
#error "Z_MIN_PIN is not an INTERRUPT capable pin."
#error "Z_MIN_PIN is not INTERRUPT-capable."
#endif
attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(Z_MIN_PIN);
#endif
#if HAS_Z2_MAX
#if !LPC1768_PIN_INTERRUPT_M(Z2_MAX_PIN)
#error "Z2_MAX_PIN is not an INTERRUPT capable pin."
#error "Z2_MAX_PIN is not INTERRUPT-capable."
#endif
attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE);
_ATTACH(Z2_MAX_PIN);
#endif
#if HAS_Z2_MIN
#if !LPC1768_PIN_INTERRUPT_M(Z2_MIN_PIN)
#error "Z2_MIN_PIN is not an INTERRUPT capable pin."
#error "Z2_MIN_PIN is not INTERRUPT-capable."
#endif
attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(Z2_MIN_PIN);
#endif
#if HAS_Z3_MAX
#if !LPC1768_PIN_INTERRUPT_M(Z3_MIN_PIN)
#error "Z3_MIN_PIN is not an INTERRUPT capable pin."
#error "Z3_MIN_PIN is not INTERRUPT-capable."
#endif
attachInterrupt(digitalPinToInterrupt(Z3_MAX_PIN), endstop_ISR, CHANGE);
_ATTACH(Z3_MAX_PIN);
#endif
#if HAS_Z3_MIN
#if !LPC1768_PIN_INTERRUPT_M(Z3_MIN_PIN)
#error "Z3_MIN_PIN is not an INTERRUPT capable pin."
#error "Z3_MIN_PIN is not INTERRUPT-capable."
#endif
attachInterrupt(digitalPinToInterrupt(Z3_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(Z3_MIN_PIN);
#endif
#if HAS_Z_MIN_PROBE_PIN
#if !LPC1768_PIN_INTERRUPT_M(Z_MIN_PROBE_PIN)
#error "Z_MIN_PROBE_PIN is not an INTERRUPT capable pin."
#error "Z_MIN_PROBE_PIN is not INTERRUPT-capable."
#endif
attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE);
_ATTACH(Z_MIN_PROBE_PIN);
#endif
}

28
Marlin/src/HAL/HAL_TEENSY31_32/endstop_interrupts.h

@ -46,40 +46,32 @@ void endstop_ISR(void) { endstops.update(); }
*/
void setup_endstop_interrupts(void) {
#define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
#if HAS_X_MAX
attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE); // assign it
_ATTACH(X_MAX_PIN);
#endif
#if HAS_X_MIN
attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(X_MIN_PIN);
#endif
#if HAS_Y_MAX
attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE);
_ATTACH(Y_MAX_PIN);
#endif
#if HAS_Y_MIN
attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(Y_MIN_PIN);
#endif
#if HAS_Z_MAX
attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE);
_ATTACH(Z_MAX_PIN);
#endif
#if HAS_Z_MIN
attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(Z_MIN_PIN);
#endif
#if HAS_Z2_MAX
attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE);
_ATTACH(Z2_MAX_PIN);
#endif
#if HAS_Z2_MIN
attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(Z2_MIN_PIN);
#endif
#if HAS_Z_MIN_PROBE_PIN
attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE);
_ATTACH(Z_MIN_PROBE_PIN);
#endif
}

23
Marlin/src/HAL/HAL_TEENSY35_36/endstop_interrupts.h

@ -45,37 +45,38 @@ void endstop_ISR(void) { endstops.update(); }
* On Due, all pins support external interrupt capability.
*/
void setup_endstop_interrupts(void) {
#define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
#if HAS_X_MAX
attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE); // assign it
_ATTACH(X_MAX_PIN);
#endif
#if HAS_X_MIN
attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(X_MIN_PIN);
#endif
#if HAS_Y_MAX
attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE);
_ATTACH(Y_MAX_PIN);
#endif
#if HAS_Y_MIN
attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(Y_MIN_PIN);
#endif
#if HAS_Z_MAX
attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE);
_ATTACH(Z_MAX_PIN);
#endif
#if HAS_Z_MIN
attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(Z_MIN_PIN);
#endif
#if HAS_Z2_MAX
attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE);
_ATTACH(Z2_MAX_PIN);
#endif
#if HAS_Z2_MIN
attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(Z2_MIN_PIN);
#endif
#if HAS_Z3_MAX
attachInterrupt(digitalPinToInterrupt(Z3_MAX_PIN), endstop_ISR, CHANGE);
_ATTACH(Z3_MAX_PIN);
#endif
#if HAS_Z3_MIN
attachInterrupt(digitalPinToInterrupt(Z3_MIN_PIN), endstop_ISR, CHANGE);
_ATTACH(Z3_MIN_PIN);
#endif
#if HAS_Z_MIN_PROBE_PIN
attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE);
_ATTACH(Z_MIN_PROBE_PIN);
#endif
}

Loading…
Cancel
Save