more work on Makefile - actually rebuilds if Makefile or Configuration.h are altered, also much cleaner output

Marlin/Makefile

@@ -32,19 +32,24 @@
 #
 # $Id$
 
-TARGET = $(notdir $(CURDIR))
-INSTALL_DIR = ../../arduino-0022/
-UPLOAD_RATE = 115200
-AVRDUDE_PROGRAMMER = arduino
-# PORT = /dev/arduino_A900G2I3
-PORT = /dev/arduino
-MCU = atmega1280
 #For "old" Arduino Mega
-#MCU = atmega1280
+MCU = atmega1280
+#For Arduino Mega2560
+#MCU = atmega2560
 #For Sanguinololu
 #MCU = atmega644p 
+
+#Arduino install directory
+INSTALL_DIR = ../../arduino-0022/
+
 F_CPU = 16000000
 
+UPLOAD_RATE = 115200
+AVRDUDE_PROGRAMMER = arduino
+PORT = /dev/arduino
+
+TARGET = $(notdir $(CURDIR))
+
 
 ############################################################################
 # Below here nothing should be changed...
@@ -52,11 +57,11 @@ F_CPU = 16000000
 ARDUINO = $(INSTALL_DIR)/hardware/arduino/cores/arduino
 AVR_TOOLS_PATH = 
 SRC =  $(ARDUINO)/pins_arduino.c $(ARDUINO)/wiring.c \
-$(ARDUINO)/wiring_analog.c $(ARDUINO)/wiring_digital.c \
+	$(ARDUINO)/wiring_analog.c $(ARDUINO)/wiring_digital.c \
-$(ARDUINO)/wiring_pulse.c \
+	$(ARDUINO)/wiring_pulse.c \
-$(ARDUINO)/wiring_shift.c $(ARDUINO)/WInterrupts.c
+	$(ARDUINO)/wiring_shift.c $(ARDUINO)/WInterrupts.c
 CXXSRC = $(ARDUINO)/WMath.cpp $(ARDUINO)/WString.cpp\
-$(ARDUINO)/Print.cpp Marlin.cpp MarlinSerial.cpp Sd2Card.cpp SdBaseFile.cpp SdFatUtil.cpp SdFile.cpp SdVolume.cpp motion_control.cpp planner.cpp stepper.cpp temperature.cpp cardreader.cpp
+	$(ARDUINO)/Print.cpp Marlin.cpp MarlinSerial.cpp Sd2Card.cpp SdBaseFile.cpp SdFatUtil.cpp SdFile.cpp SdVolume.cpp motion_control.cpp planner.cpp stepper.cpp temperature.cpp cardreader.cpp
 FORMAT = ihex
 
 
@@ -99,8 +104,8 @@ LDFLAGS = -lm
 AVRDUDE_PORT = $(PORT)
 AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex:i
 AVRDUDE_FLAGS = -D -C $(INSTALL_DIR)/hardware/tools/avrdude.conf \
--p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \
+	-p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \
--b $(UPLOAD_RATE)
+	-b $(UPLOAD_RATE)
 
 # Program settings
 CC = $(AVR_TOOLS_PATH)avr-gcc
@@ -128,22 +133,23 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 
 
 # Default target.
-all: applet_files build sizeafter
+all: build sizeafter
 
 build: elf hex 
 
-applet_files: $(TARGET).pde
+applet/$(TARGET).cpp: $(TARGET).pde $(MAKEFILE)
-	# Here is the "preprocessing".
+# Here is the "preprocessing".
-	# It creates a .cpp file based with the same name as the .pde file.
+# It creates a .cpp file based with the same name as the .pde file.
-	# On top of the new .cpp file comes the WProgram.h header.
+# On top of the new .cpp file comes the WProgram.h header.
-	# At the end there is a generic main() function attached.
+# At the end there is a generic main() function attached.
-	# Then the .cpp file will be compiled. Errors during compile will
+# Then the .cpp file will be compiled. Errors during compile will
-	# refer to this new, automatically generated, file. 
+# refer to this new, automatically generated, file. 
-	# Not the original .pde file you actually edit...
+# Not the original .pde file you actually edit...
-	test -d applet || mkdir applet
+	@echo "  WR    applet/$(TARGET).cpp"
-	echo '#include "WProgram.h"' > applet/$(TARGET).cpp
+	@test -d applet || mkdir applet
-	cat $(TARGET).pde >> applet/$(TARGET).cpp
+	@echo '#include "WProgram.h"' > applet/$(TARGET).cpp
-	cat $(ARDUINO)/main.cpp >> applet/$(TARGET).cpp
+	@cat $(TARGET).pde >> applet/$(TARGET).cpp
+	@cat $(ARDUINO)/main.cpp >> applet/$(TARGET).cpp
 
 elf: applet/$(TARGET).elf
 hex: applet/$(TARGET).hex
@@ -165,15 +171,15 @@ sizebefore:
 	@if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi
 
 sizeafter:
-	@if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(HEXSIZE); echo; fi
+	@if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
 
 
 # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
 COFFCONVERT=$(OBJCOPY) --debugging \
---change-section-address .data-0x800000 \
+	--change-section-address .data-0x800000 \
---change-section-address .bss-0x800000 \
+	--change-section-address .bss-0x800000 \
---change-section-address .noinit-0x800000 \
+	--change-section-address .noinit-0x800000 \
---change-section-address .eeprom-0x810000 
+	--change-section-address .eeprom-0x810000 
 
 
 coff: applet/$(TARGET).elf
@@ -185,9 +191,11 @@ extcoff: $(TARGET).elf
 
 
 .SUFFIXES: .elf .hex .eep .lss .sym
+.PRECIOUS: .o
 
 .elf.hex:
-	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
+	@echo "  COPY  $@"
+	@$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
 
 .elf.eep:
 	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
@@ -202,39 +210,29 @@ extcoff: $(TARGET).elf
 	$(NM) -n $< > $@
 
 	# Link: create ELF output file from library.
-applet/$(TARGET).elf: $(TARGET).pde applet/core.a 
+applet/$(TARGET).elf: applet/$(TARGET).cpp applet/core.a Configuration.h
-	$(CC) $(ALL_CFLAGS) -Wl,--gc-sections -o $@ applet/$(TARGET).cpp -L. applet/core.a $(LDFLAGS)
+	@echo "  CXX   $@"
-
+	@$(CC) $(ALL_CXXFLAGS) -Wl,--gc-sections -o $@ applet/$(TARGET).cpp -L. applet/core.a $(LDFLAGS)
-applet/core.a: $(OBJ)
-	@for i in $(OBJ); do echo $(AR) rcs applet/core.a $$i; $(AR) rcs applet/core.a $$i; done
-
-
-
-# Compile: create object files from C++ source files.
-.cpp.o:
-	$(CXX) -c $(ALL_CXXFLAGS) $< -o $@ 
-
-# Compile: create object files from C source files.
-.c.o:
-	$(CC) -c $(ALL_CFLAGS) $< -o $@ 
-
-
-# Compile: create assembler files from C source files.
-.c.s:
-	$(CC) -S $(ALL_CFLAGS) $< -o $@
-
 
-# Assemble: create object files from assembler source files.
+applet/core.a: $(OBJ) Configuration.h
-.S.o:
+	@for i in $(OBJ); do echo "  AR    $$i"; $(AR) rcs applet/core.a $$i; done
-	$(CC) -c $(ALL_ASFLAGS) $< -o $@
 
+%.o: %.c Configuration.h $(MAKEFILE)
+	@echo "  CC    $@"
+	@$(CC) -c $(ALL_CFLAGS) $< -o $@
 
+%.o: %.cpp Configuration.h $(MAKEFILE)
+	@echo "  CXX   $@"
+	@$(CXX) -c $(ALL_CXXFLAGS) $< -o $@
 
 # Target: clean project.
 clean:
-	$(REMOVE) applet/$(TARGET).hex applet/$(TARGET).eep applet/$(TARGET).cof applet/$(TARGET).elf \
+	@echo "  RM    applet/*"
-	applet/$(TARGET).map applet/$(TARGET).sym applet/$(TARGET).lss applet/core.a \
+	@$(REMOVE) applet/$(TARGET).hex applet/$(TARGET).eep applet/$(TARGET).cof applet/$(TARGET).elf \
+		applet/$(TARGET).map applet/$(TARGET).sym applet/$(TARGET).lss applet/$(TARGET).cpp applet/core.a \
 		$(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d)
+	@echo "  RMDIR applet/"
+	@rmdir applet
 
 depend:
 	if grep '^# DO NOT DELETE' $(MAKEFILE) >/dev/null; \