Merge pull request #2120 from chris-bo/dogm_config

move dogm font selection to configuration_adv.h

Marlin/Configuration_adv.h

@@ -315,6 +315,17 @@
 
 #endif // SDSUPPORT
 
+// for dogm lcd displays you can choose some additional fonts:
+#ifdef DOGLCD
+  // save 3120 bytes of PROGMEM by commenting out #define USE_BIG_EDIT_FONT
+  // we don't have a big font for Cyrillic, Kana
+  //#define USE_BIG_EDIT_FONT
+ 
+  // If you have spare 2300Byte of progmem and want to use a 
+  // smaller font on the Info-screen uncomment the next line.
+  //#define USE_SMALL_INFOFONT
+#endif // DOGLCD
+
 // @section more
 
 // The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.

Marlin/configurator/config/Configuration_adv.h

@@ -323,6 +323,17 @@
 
 #endif // SDSUPPORT
 
+// for dogm lcd displays you can choose some additional fonts:
+#ifdef DOGLCD
+  // save 3120 bytes of PROGMEM by commenting out #define USE_BIG_EDIT_FONT
+  // we don't have a big font for Cyrillic, Kana
+  //#define USE_BIG_EDIT_FONT
+ 
+  // If you have spare 2300Byte of progmem and want to use a 
+  // smaller font on the Info-screen uncomment the next line.
+  //#define USE_SMALL_INFOFONT
+#endif // DOGLCD
+
 // @section more
 
 // The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.

Marlin/dogm_lcd_implementation.h

@@ -35,15 +35,11 @@
 #include "ultralcd_st7920_u8glib_rrd.h"
 #include "Configuration.h"
 
-// save 3120 bytes of PROGMEM by commenting out #define USE_BIG_EDIT_FONT
+#if !defined(MAPPER_C2C3) && !defined(MAPPER_NON) && defined(USE_BIG_EDIT_FONT)
-// we don't have a big font for Cyrillic, Kana
+   #undef USE_BIG_EDIT_FONT
-#if defined(MAPPER_C2C3) || defined(MAPPER_NON)
-  //#define USE_BIG_EDIT_FONT
 #endif
 
-// If you have spare 2300Byte of progmem and want to use a 
+
-// smaller font on the Info-screen uncomment the next line.
-//#define USE_SMALL_INFOFONT
 #ifdef USE_SMALL_INFOFONT
   #include "dogm_font_data_6x9_marlin.h"
   #define FONT_STATUSMENU_NAME u8g_font_6x9

Marlin/example_configurations/Felix/Configuration_adv.h

@@ -323,6 +323,18 @@
 
 #endif // SDSUPPORT
 
+// for dogm lcd displays you can choose some additional fonts:
+#ifdef DOGLCD
+  // save 3120 bytes of PROGMEM by commenting out #define USE_BIG_EDIT_FONT
+  // we don't have a big font for Cyrillic, Kana
+  //#define USE_BIG_EDIT_FONT
+ 
+  // If you have spare 2300Byte of progmem and want to use a 
+  // smaller font on the Info-screen uncomment the next line.
+  //#define USE_SMALL_INFOFONT
+#endif // DOGLCD
+
+
 // @section more
 
 // The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.

Marlin/example_configurations/Hephestos/Configuration_adv.h

@@ -323,6 +323,18 @@
 
 #endif // SDSUPPORT
 
+// for dogm lcd displays you can choose some additional fonts:
+#ifdef DOGLCD
+  // save 3120 bytes of PROGMEM by commenting out #define USE_BIG_EDIT_FONT
+  // we don't have a big font for Cyrillic, Kana
+  //#define USE_BIG_EDIT_FONT
+ 
+  // If you have spare 2300Byte of progmem and want to use a 
+  // smaller font on the Info-screen uncomment the next line.
+  //#define USE_SMALL_INFOFONT
+#endif // DOGLCD
+
+
 // @section more
 
 // The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.

Marlin/example_configurations/K8200/Configuration_adv.h

@@ -323,6 +323,18 @@
 
 #endif // SDSUPPORT
 
+// for dogm lcd displays you can choose some additional fonts:
+#ifdef DOGLCD
+  // save 3120 bytes of PROGMEM by commenting out #define USE_BIG_EDIT_FONT
+  // we don't have a big font for Cyrillic, Kana
+  //#define USE_BIG_EDIT_FONT
+ 
+  // If you have spare 2300Byte of progmem and want to use a 
+  // smaller font on the Info-screen uncomment the next line.
+  //#define USE_SMALL_INFOFONT
+#endif // DOGLCD
+
+
 // @section more
 
 // The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.

Marlin/example_configurations/SCARA/Configuration_adv.h

@@ -323,6 +323,18 @@
 
 #endif // SDSUPPORT
 
+// for dogm lcd displays you can choose some additional fonts:
+#ifdef DOGLCD
+  // save 3120 bytes of PROGMEM by commenting out #define USE_BIG_EDIT_FONT
+  // we don't have a big font for Cyrillic, Kana
+  //#define USE_BIG_EDIT_FONT
+ 
+  // If you have spare 2300Byte of progmem and want to use a 
+  // smaller font on the Info-screen uncomment the next line.
+  //#define USE_SMALL_INFOFONT
+#endif // DOGLCD
+
+
 // @section more
 
 // The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.

Marlin/example_configurations/WITBOX/Configuration_adv.h

@@ -323,6 +323,18 @@
 
 #endif // SDSUPPORT
 
+// for dogm lcd displays you can choose some additional fonts:
+#ifdef DOGLCD
+  // save 3120 bytes of PROGMEM by commenting out #define USE_BIG_EDIT_FONT
+  // we don't have a big font for Cyrillic, Kana
+  //#define USE_BIG_EDIT_FONT
+ 
+  // If you have spare 2300Byte of progmem and want to use a 
+  // smaller font on the Info-screen uncomment the next line.
+  //#define USE_SMALL_INFOFONT
+#endif // DOGLCD
+
+
 // @section more
 
 // The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.

Marlin/example_configurations/delta/biv2.5/Configuration_adv.h

@@ -324,6 +324,17 @@
 
 #endif // SDSUPPORT
 
+// for dogm lcd displays you can choose some additional fonts:
+#ifdef DOGLCD
+  // save 3120 bytes of PROGMEM by commenting out #define USE_BIG_EDIT_FONT
+  // we don't have a big font for Cyrillic, Kana
+  //#define USE_BIG_EDIT_FONT
+ 
+  // If you have spare 2300Byte of progmem and want to use a 
+  // smaller font on the Info-screen uncomment the next line.
+  //#define USE_SMALL_INFOFONT
+#endif // DOGLCD
+
 // @section more
 
 // The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.

Marlin/example_configurations/delta/generic/Configuration_adv.h

@@ -324,6 +324,18 @@
 
 #endif // SDSUPPORT
 
+// for dogm lcd displays you can choose some additional fonts:
+#ifdef DOGLCD
+  // save 3120 bytes of PROGMEM by commenting out #define USE_BIG_EDIT_FONT
+  // we don't have a big font for Cyrillic, Kana
+  //#define USE_BIG_EDIT_FONT
+ 
+  // If you have spare 2300Byte of progmem and want to use a 
+  // smaller font on the Info-screen uncomment the next line.
+  //#define USE_SMALL_INFOFONT
+#endif // DOGLCD
+
+
 // @section more
 
 // The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.

Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h

@@ -323,6 +323,18 @@
 
 #endif // SDSUPPORT
 
+// for dogm lcd displays you can choose some additional fonts:
+#ifdef DOGLCD
+  // save 3120 bytes of PROGMEM by commenting out #define USE_BIG_EDIT_FONT
+  // we don't have a big font for Cyrillic, Kana
+  //#define USE_BIG_EDIT_FONT
+ 
+  // If you have spare 2300Byte of progmem and want to use a 
+  // smaller font on the Info-screen uncomment the next line.
+  //#define USE_SMALL_INFOFONT
+#endif // DOGLCD
+
+
 // @section more
 
 // The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.

Marlin/example_configurations/makibox/Configuration_adv.h

@@ -323,6 +323,18 @@
 
 #endif // SDSUPPORT
 
+// for dogm lcd displays you can choose some additional fonts:
+#ifdef DOGLCD
+  // save 3120 bytes of PROGMEM by commenting out #define USE_BIG_EDIT_FONT
+  // we don't have a big font for Cyrillic, Kana
+  //#define USE_BIG_EDIT_FONT
+ 
+  // If you have spare 2300Byte of progmem and want to use a 
+  // smaller font on the Info-screen uncomment the next line.
+  //#define USE_SMALL_INFOFONT
+#endif // DOGLCD
+
+
 // @section more
 
 // The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.

Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h

@@ -323,6 +323,18 @@
 
 #endif // SDSUPPORT
 
+// for dogm lcd displays you can choose some additional fonts:
+#ifdef DOGLCD
+  // save 3120 bytes of PROGMEM by commenting out #define USE_BIG_EDIT_FONT
+  // we don't have a big font for Cyrillic, Kana
+  //#define USE_BIG_EDIT_FONT
+ 
+  // If you have spare 2300Byte of progmem and want to use a 
+  // smaller font on the Info-screen uncomment the next line.
+  //#define USE_SMALL_INFOFONT
+#endif // DOGLCD
+
+
 // @section more
 
 // The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.