Merge pull request #2105 from eboston/Development

Add  ELB_FULL_GRAPHIC_CONTROLLER with ADAFRUIT_ST7565 display.

Marlin/Conditionals.h

@@ -22,15 +22,20 @@
     #define NEWPANEL
   #endif
 
-  #if defined(miniVIKI) || defined(VIKI2)
+  #if defined(miniVIKI) || defined(VIKI2) || defined(ELB_FULL_GRAPHIC_CONTROLLER)
     #define ULTRA_LCD  //general LCD support, also 16x2
     #define DOGLCD  // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
     #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store.
 
     #ifdef miniVIKI
       #define DEFAULT_LCD_CONTRAST 95
-    #else
+    #elif defined(VIKI2)
       #define DEFAULT_LCD_CONTRAST 40
+    #elif defined(ELB_FULL_GRAPHIC_CONTROLLER)
+      #define DEFAULT_LCD_CONTRAST 110
+      #define SDCARDDETECTINVERTED
+      #define SDSLOW
+      #define U8GLIB_LM6059_AF
     #endif
 
     #define ENCODER_PULSES_PER_STEP 4

Marlin/Configuration.h

@@ -660,6 +660,11 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 //#define VIKI2
 //#define miniVIKI
 
+// This is a new controller currently under development.  https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
+//
+// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
+//#define ELB_FULL_GRAPHIC_CONTROLLER
+
 // The RepRapDiscount Smart Controller (white PCB)
 // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
 //#define REPRAP_DISCOUNT_SMART_CONTROLLER

Marlin/configurator/config/Configuration.h

@@ -661,6 +661,11 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 //#define VIKI2
 //#define miniVIKI
 
+// This is a new controller currently under development.  https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
+//
+// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
+//#define ELB_FULL_GRAPHIC_CONTROLLER
+
 // The RepRapDiscount Smart Controller (white PCB)
 // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
 //#define REPRAP_DISCOUNT_SMART_CONTROLLER

Marlin/dogm_lcd_implementation.h

@@ -126,6 +126,9 @@
 #elif defined(VIKI2) || defined(miniVIKI)
   // Mini Viki and Viki 2.0 LCD, ST7565 controller as well
   U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0);
+#elif defined(U8GLIB_LM6059_AF)
+  // Based on the Adafruit ST7565 (http://www.adafruit.com/products/250)
+  U8GLIB_LM6059 u8g(DOGLCD_CS, DOGLCD_A0);
 #else
   // for regular DOGM128 display with HW-SPI
   U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0);  // HW-SPI Com: CS, A0

Marlin/example_configurations/Felix/Configuration.h

@@ -595,6 +595,11 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 //#define VIKI2
 //#define miniVIKI
 
+// This is a new controller currently under development.  https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
+//
+// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
+//#define ELB_FULL_GRAPHIC_CONTROLLER
+
 // The RepRapDiscount Smart Controller (white PCB)
 // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
 //#define REPRAP_DISCOUNT_SMART_CONTROLLER

Marlin/example_configurations/Hephestos/Configuration.h

@@ -615,6 +615,11 @@ const bool Z_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic
 //#define VIKI2
 //#define miniVIKI
 
+// This is a new controller currently under development.  https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
+//
+// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
+//#define ELB_FULL_GRAPHIC_CONTROLLER
+
 // The RepRapDiscount Smart Controller (white PCB)
 // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
 #define REPRAP_DISCOUNT_SMART_CONTROLLER

Marlin/example_configurations/K8200/Configuration.h

@@ -678,6 +678,11 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 //#define VIKI2
 //#define miniVIKI
 
+// This is a new controller currently under development.  https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
+//
+// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
+//#define ELB_FULL_GRAPHIC_CONTROLLER
+
 // The RepRapDiscount Smart Controller (white PCB)
 // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
 //#define REPRAP_DISCOUNT_SMART_CONTROLLER

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -661,6 +661,11 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 //#define VIKI2
 //#define miniVIKI
 
+// This is a new controller currently under development.  https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
+//
+// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
+//#define ELB_FULL_GRAPHIC_CONTROLLER
+
 // The RepRapDiscount Smart Controller (white PCB)
 // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
 //#define REPRAP_DISCOUNT_SMART_CONTROLLER

Marlin/example_configurations/SCARA/Configuration.h

@@ -646,6 +646,11 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 //#define VIKI2
 //#define miniVIKI
 
+// This is a new controller currently under development.  https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
+//
+// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
+//#define ELB_FULL_GRAPHIC_CONTROLLER
+
 // The RepRapDiscount Smart Controller (white PCB)
 // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
 //#define REPRAP_DISCOUNT_SMART_CONTROLLER

Marlin/example_configurations/WITBOX/Configuration.h

@@ -614,6 +614,11 @@ const bool Z_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic
 //#define VIKI2
 //#define miniVIKI
 
+// This is a new controller currently under development.  https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
+//
+// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
+//#define ELB_FULL_GRAPHIC_CONTROLLER
+
 // The RepRapDiscount Smart Controller (white PCB)
 // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
 #define REPRAP_DISCOUNT_SMART_CONTROLLER

Marlin/example_configurations/delta/biv2.5/Configuration.h

@@ -660,6 +660,11 @@ const bool Z_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic
 //#define VIKI2
 //#define miniVIKI
 
+// This is a new controller currently under development.  https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
+//
+// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
+//#define ELB_FULL_GRAPHIC_CONTROLLER
+
 // The RepRapDiscount Smart Controller (white PCB)
 // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
 //#define REPRAP_DISCOUNT_SMART_CONTROLLER

Marlin/example_configurations/delta/generic/Configuration.h

@@ -663,6 +663,11 @@ const bool Z_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic
 //#define VIKI2
 //#define miniVIKI
 
+// This is a new controller currently under development.  https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
+//
+// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
+//#define ELB_FULL_GRAPHIC_CONTROLLER
+
 // The RepRapDiscount Smart Controller (white PCB)
 // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
 //#define REPRAP_DISCOUNT_SMART_CONTROLLER

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -667,6 +667,11 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 //#define VIKI2
 //#define miniVIKI
 
+// This is a new controller currently under development.  https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
+//
+// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
+//#define ELB_FULL_GRAPHIC_CONTROLLER
+
 // The RepRapDiscount Smart Controller (white PCB)
 // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
 //#define REPRAP_DISCOUNT_SMART_CONTROLLER

Marlin/example_configurations/makibox/Configuration.h

@@ -614,6 +614,11 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 //#define VIKI2
 //#define miniVIKI
 
+// This is a new controller currently under development.  https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
+//
+// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
+//#define ELB_FULL_GRAPHIC_CONTROLLER
+
 // The RepRapDiscount Smart Controller (white PCB)
 // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
 //#define REPRAP_DISCOUNT_SMART_CONTROLLER

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -620,6 +620,11 @@ const bool Z_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic
 //#define VIKI2
 //#define miniVIKI
 
+// This is a new controller currently under development.  https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
+//
+// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
+//#define ELB_FULL_GRAPHIC_CONTROLLER
+
 // The RepRapDiscount Smart Controller (white PCB)
 // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
 //#define REPRAP_DISCOUNT_SMART_CONTROLLER

Marlin/pins_RAMPS_13.h

@@ -180,6 +180,17 @@
       #define BTN_ENC -1
       #define LCD_SDSS 53
       #define SDCARDDETECT 49
+    #elif defined(ELB_FULL_GRAPHIC_CONTROLLER)
+      #define BTN_EN1 35  // reverse if the encoder turns the wrong way.
+      #define BTN_EN2 37
+      #define BTN_ENC 31
+      #define SDCARDDETECT 49
+      #define LCD_SDSS 53
+      #define KILL_PIN 41
+      #define BEEPER 23
+      #define DOGLCD_CS 29
+      #define DOGLCD_A0 27
+      #define LCD_PIN_BL 33
     #else
       // arduino pin which triggers an piezzo beeper
       #define BEEPER 33  // Beeper on AUX-4
@@ -209,7 +220,6 @@
       #endif
 
     #endif
-
   #else // Old-style panel with shift register
     // Arduino pin witch triggers an piezzo beeper
     #define BEEPER 33   // No Beeper added

Marlin/ultralcd.cpp

@@ -1110,13 +1110,24 @@ static void lcd_control_volumetric_menu() {
 #ifdef HAS_LCD_CONTRAST
   static void lcd_set_contrast() {
     if (encoderPosition != 0) {
-      lcd_contrast -= encoderPosition;
-      lcd_contrast &= 0x3F;
+      #ifdef U8GLIB_LM6059_AF
+        lcd_contrast += encoderPosition;
+        lcd_contrast &= 0xFF;
+      #else
+        lcd_contrast -= encoderPosition;
+        lcd_contrast &= 0x3F;
+      #endif
       encoderPosition = 0;
       lcdDrawUpdate = 1;
       u8g.setContrast(lcd_contrast);
     }
-    if (lcdDrawUpdate) lcd_implementation_drawedit(PSTR(MSG_CONTRAST), itostr2(lcd_contrast));
+    if (lcdDrawUpdate) {
+      #ifdef U8GLIB_LM6059_AF
+        lcd_implementation_drawedit(PSTR(MSG_CONTRAST), itostr3(lcd_contrast));
+      #else
+        lcd_implementation_drawedit(PSTR(MSG_CONTRAST), itostr2(lcd_contrast));
+      #endif
+    }
     if (LCD_CLICKED) lcd_goto_menu(lcd_control_menu);
   }
 #endif // HAS_LCD_CONTRAST