Browse Source

General cleanup

vanilla_fb_2.0.x
Scott Lahteine 4 years ago
parent
commit
9b78138600
  1. 8
      Marlin/src/HAL/LPC1768/HAL_SPI.cpp
  2. 2
      Marlin/src/HAL/STM32F1/sdio.cpp
  3. 4
      Marlin/src/gcode/motion/G2_G3.cpp
  4. 10
      Marlin/src/lcd/dwin/e3v2/rotary_encoder.cpp
  5. 6
      Marlin/src/lcd/dwin/e3v2/rotary_encoder.h
  6. 8
      Marlin/src/pins/stm32f1/pins_CREALITY_V4.h

8
Marlin/src/HAL/LPC1768/HAL_SPI.cpp

@ -370,19 +370,19 @@ void SPIClass::updateSettings() {
switch (_currentSetting->dataMode) {
case SPI_MODE0:
HW_SPI_init.CPHA = SSP_CPHA_FIRST;
HW_SPI_init.CPOL = SSP_CPOL_HI;
HW_SPI_init.CPOL = SSP_CPOL_HI;
break;
case SPI_MODE1:
HW_SPI_init.CPHA = SSP_CPHA_SECOND;
HW_SPI_init.CPOL = SSP_CPOL_HI;
HW_SPI_init.CPOL = SSP_CPOL_HI;
break;
case SPI_MODE2:
HW_SPI_init.CPHA = SSP_CPHA_FIRST;
HW_SPI_init.CPOL = SSP_CPOL_LO;
HW_SPI_init.CPOL = SSP_CPOL_LO;
break;
case SPI_MODE3:
HW_SPI_init.CPHA = SSP_CPHA_SECOND;
HW_SPI_init.CPOL = SSP_CPOL_LO;
HW_SPI_init.CPOL = SSP_CPOL_LO;
break;
default:
break;

2
Marlin/src/HAL/STM32F1/sdio.cpp

@ -108,7 +108,7 @@ bool SDIO_ReadBlock_DMA(uint32_t blockAddress, uint8_t *data) {
SDIO_CLEAR_FLAG(SDIO_ICR_CMD_FLAGS | SDIO_ICR_DATA_FLAGS);
dma_disable(SDIO_DMA_DEV, SDIO_DMA_CHANNEL);
return false;
}
}
//Wait for DMA transaction to complete
while ((DMA2_BASE->ISR & (DMA_ISR_TEIF4|DMA_ISR_TCIF4)) == 0 ) { /* wait */ }

4
Marlin/src/gcode/motion/G2_G3.cpp

@ -115,9 +115,7 @@ void plan_arc(
);
// Divide total travel by nominal segment length
uint16_t segments = FLOOR(mm_of_travel / seg_length);
if (segments < min_segments) { // Too few segments?
segments = min_segments; // More segments
}
NOLESS(segments, min_segments); // At least some segments
seg_length = mm_of_travel / segments;
/**

10
Marlin/src/lcd/dwin/e3v2/rotary_encoder.cpp

@ -127,15 +127,15 @@ ENCODER_DiffState Encoder_ReceiveAnalyze(void) {
// if must encoder rati multiplier
if (EncoderRate.encoderRateEnabled) {
const float abs_diff = ABS(temp_diff);
const float encoderMovementSteps = abs_diff / (ENCODER_PULSES_PER_STEP);
const float abs_diff = ABS(temp_diff),
encoderMovementSteps = abs_diff / (ENCODER_PULSES_PER_STEP);
if (EncoderRate.lastEncoderTime) {
// Note that the rate is always calculated between two passes through the
// loop and that the abs of the temp_diff value is tracked.
const float encoderStepRate = encoderMovementSteps / float(ms - EncoderRate.lastEncoderTime) * 1000;
if (encoderStepRate >= ENCODER_100X_STEPS_PER_SEC) encoderMultiplier = 100;
else if (encoderStepRate >= ENCODER_10X_STEPS_PER_SEC) encoderMultiplier = 10;
else if (encoderStepRate >= ENCODER_5X_STEPS_PER_SEC) encoderMultiplier = 5;
if (encoderStepRate >= ENCODER_100X_STEPS_PER_SEC) encoderMultiplier = 100;
else if (encoderStepRate >= ENCODER_10X_STEPS_PER_SEC) encoderMultiplier = 10;
else if (encoderStepRate >= ENCODER_5X_STEPS_PER_SEC) encoderMultiplier = 5;
}
EncoderRate.lastEncoderTime = ms;
}

6
Marlin/src/lcd/dwin/e3v2/rotary_encoder.h

@ -55,9 +55,9 @@ extern ENCODER_Rate EncoderRate;
typedef enum {
ENCODER_DIFF_NO = 0,
ENCODER_DIFF_CW = 1,
ENCODER_DIFF_CW = 1,
ENCODER_DIFF_CCW = 2,
ENCODER_DIFF_ENTER = 3
ENCODER_DIFF_ENTER = 3
} ENCODER_DiffState;
/*编码器初始化 PB12:Encoder_A PB13:Encoder_B PB14:Encoder_C*/
@ -87,7 +87,7 @@ ENCODER_DiffState Encoder_ReceiveAnalyze(void);
/*状态LED初始化*/
void STATE_LED_Configuration(void);
/*LED灯操作*/
/*LED灯操作*/
void LED_Action(void);
/*LED初始化*/

8
Marlin/src/pins/stm32f1/pins_CREALITY_V4.h

@ -161,7 +161,7 @@
#if ENABLED(RET6_12864_LCD)
/* RET6 12864 LCD */
// RET6 12864 LCD
#define LCD_PINS_RS PB12
#define LCD_PINS_ENABLE PB15
#define LCD_PINS_D4 PB13
@ -174,7 +174,7 @@
#elif ENABLED(VET6_12864_LCD)
/* VET6 12864 LCD */
// VET6 12864 LCD
#define LCD_PINS_RS PA4
#define LCD_PINS_ENABLE PA7
#define LCD_PINS_D4 PA5
@ -185,7 +185,7 @@
#elif ENABLED(DWIN_CREALITY_LCD)
/* RET6 DWIN ENCODER LCD */
// RET6 DWIN ENCODER LCD
#define BTN_ENC PB14
#define BTN_EN1 PB15
#define BTN_EN2 PB12
@ -198,7 +198,7 @@
#elif ENABLED(DWIN_VET6_CREALITY_LCD)
/* VET6 DWIN ENCODER LCD */
// VET6 DWIN ENCODER LCD
#define BTN_ENC PA6
#define BTN_EN1 PA7
#define BTN_EN2 PA4

Loading…
Cancel
Save