Browse Source

Update Polish language

Translation of messages in English to Polish.
pull/1/head
android444 8 years ago
committed by Scott Lahteine
parent
commit
9b1f4b514b
  1. 108
      Marlin/language_pl.h

108
Marlin/language_pl.h

@ -157,15 +157,15 @@
#define MSG_HEATING_FAILED_LCD "Rozgrz. nieudane" #define MSG_HEATING_FAILED_LCD "Rozgrz. nieudane"
#define MSG_ERR_REDUNDANT_TEMP "Blad temperatury" #define MSG_ERR_REDUNDANT_TEMP "Blad temperatury"
#define MSG_THERMAL_RUNAWAY "Zanik temp." #define MSG_THERMAL_RUNAWAY "Zanik temp."
#define MSG_ERR_MAXTEMP "Err: max. temp." #define MSG_ERR_MAXTEMP "Err max temp"
#define MSG_ERR_MINTEMP "Err: min. temp." #define MSG_ERR_MINTEMP "Err min temp"
#define MSG_ERR_MAXTEMP_BED "Err: max. temp. loza" #define MSG_ERR_MAXTEMP_BED "Err max temp stolu"
#define MSG_ERR_MINTEMP_BED "Err: min. temp. loza" #define MSG_ERR_MINTEMP_BED "Err min temp stolu"
#define MSG_ERR_Z_HOMING "G28 Z Forbidden" #define MSG_ERR_Z_HOMING "G28 Z Forbidden"
#define MSG_HALTED "PRINTER HALTED" #define MSG_HALTED "Drukarka zatrzym."
#define MSG_PLEASE_RESET "Please reset" #define MSG_PLEASE_RESET "Prosze zresetowac"
#define MSG_SHORT_DAY "d" // One character only #define MSG_SHORT_DAY "d" // One character only
#define MSG_SHORT_HOUR "h" // One character only #define MSG_SHORT_HOUR "g" // One character only
#define MSG_SHORT_MINUTE "m" // One character only #define MSG_SHORT_MINUTE "m" // One character only
#define MSG_HEATING "Rozgrzewanie..." #define MSG_HEATING "Rozgrzewanie..."
#define MSG_HEATING_COMPLETE "Rozgrzano" #define MSG_HEATING_COMPLETE "Rozgrzano"
@ -177,68 +177,68 @@
#define MSG_DELTA_CALIBRATE_Z "Kalibruj Z" #define MSG_DELTA_CALIBRATE_Z "Kalibruj Z"
#define MSG_DELTA_CALIBRATE_CENTER "Kalibruj środek" #define MSG_DELTA_CALIBRATE_CENTER "Kalibruj środek"
#define MSG_INFO_MENU "About Printer" #define MSG_INFO_MENU "O drukarce"
#define MSG_INFO_PRINTER_MENU "Printer Info" #define MSG_INFO_PRINTER_MENU "Info drukarki"
#define MSG_INFO_STATS_MENU "Printer Stats" #define MSG_INFO_STATS_MENU "Statystyki"
#define MSG_INFO_BOARD_MENU "Board Info" #define MSG_INFO_BOARD_MENU "Board Info"
#define MSG_INFO_THERMISTOR_MENU "Thermistors" #define MSG_INFO_THERMISTOR_MENU "Thermistory"
#define MSG_INFO_EXTRUDERS "Extruders" #define MSG_INFO_EXTRUDERS "Ekstrudery"
#define MSG_INFO_BAUDRATE "Baud" #define MSG_INFO_BAUDRATE "Prędkosc USB"
#define MSG_INFO_PROTOCOL "Protocol" #define MSG_INFO_PROTOCOL "Protokol"
#define MSG_LIGHTS_ON "Case light on" #define MSG_LIGHTS_ON "Oswietlenie wl."
#define MSG_LIGHTS_OFF "Case light off" #define MSG_LIGHTS_OFF "Oswietlenie wyl."
#if LCD_WIDTH >= 20 #if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Print Count" #define MSG_INFO_PRINT_COUNT "Wydrukowano"
#define MSG_INFO_COMPLETED_PRINTS "Completed" #define MSG_INFO_COMPLETED_PRINTS "Ukończono"
#define MSG_INFO_PRINT_TIME "Total print time" #define MSG_INFO_PRINT_TIME "Czas druku"
#define MSG_INFO_PRINT_LONGEST "Longest job time" #define MSG_INFO_PRINT_LONGEST "Najdl. druk"
#define MSG_INFO_PRINT_FILAMENT "Extruded total" #define MSG_INFO_PRINT_FILAMENT "Uzyty fil."
#else #else
#define MSG_INFO_PRINT_COUNT "Prints" #define MSG_INFO_PRINT_COUNT "Wydrukowano"
#define MSG_INFO_COMPLETED_PRINTS "Completed" #define MSG_INFO_COMPLETED_PRINTS "Ukonczono"
#define MSG_INFO_PRINT_TIME "Total" #define MSG_INFO_PRINT_TIME "Razem"
#define MSG_INFO_PRINT_LONGEST "Longest" #define MSG_INFO_PRINT_LONGEST "Najdl. druk"
#define MSG_INFO_PRINT_FILAMENT "Extruded" #define MSG_INFO_PRINT_FILAMENT "Uzyty fil."
#endif #endif
#define MSG_INFO_MIN_TEMP "Min Temp" #define MSG_INFO_MIN_TEMP "Min Temp"
#define MSG_INFO_MAX_TEMP "Max Temp" #define MSG_INFO_MAX_TEMP "Max Temp"
#define MSG_INFO_PSU "Power Supply" #define MSG_INFO_PSU "Zasilacz"
#define MSG_DRIVE_STRENGTH "Drive Strength" #define MSG_DRIVE_STRENGTH "Siła silnika"
#define MSG_DAC_PERCENT "Driver %" #define MSG_DAC_PERCENT "Siła %"
#define MSG_DAC_EEPROM_WRITE "DAC EEPROM Write" #define MSG_DAC_EEPROM_WRITE "Zapisz DAC EEPROM"
#define MSG_FILAMENT_CHANGE_HEADER "CHANGE FILAMENT" #define MSG_FILAMENT_CHANGE_HEADER "ZMIEN FILAMENT"
#define MSG_FILAMENT_CHANGE_OPTION_HEADER "CHANGE OPTIONS:" #define MSG_FILAMENT_CHANGE_OPTION_HEADER "ZMIEN OPCJE:"
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extrude more" #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Ekstruduj wiecej"
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Resume print" #define MSG_FILAMENT_CHANGE_OPTION_RESUME "Wznow drukowanie"
#if LCD_HEIGHT >= 4 #if LCD_HEIGHT >= 4
#define MSG_FILAMENT_CHANGE_INIT_1 "Wait for start" #define MSG_FILAMENT_CHANGE_INIT_1 "Czekam na "
#define MSG_FILAMENT_CHANGE_INIT_2 "of the filament" #define MSG_FILAMENT_CHANGE_INIT_2 "zmiane filamentu"
#define MSG_FILAMENT_CHANGE_INIT_3 "change" #define MSG_FILAMENT_CHANGE_INIT_3 ""
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Wait for" #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Czekam na"
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "filament unload" #define MSG_FILAMENT_CHANGE_UNLOAD_2 "wyjecie filamentu"
#define MSG_FILAMENT_CHANGE_UNLOAD_3 "" #define MSG_FILAMENT_CHANGE_UNLOAD_3 ""
#define MSG_FILAMENT_CHANGE_INSERT_1 "Insert filament" #define MSG_FILAMENT_CHANGE_INSERT_1 "Wloz filament"
#define MSG_FILAMENT_CHANGE_INSERT_2 "and press button" #define MSG_FILAMENT_CHANGE_INSERT_2 "i nacisnij przycisk"
#define MSG_FILAMENT_CHANGE_INSERT_3 "to continue..." #define MSG_FILAMENT_CHANGE_INSERT_3 "aby kontynuowac..."
#define MSG_FILAMENT_CHANGE_LOAD_1 "Wait for" #define MSG_FILAMENT_CHANGE_LOAD_1 "Czekam na"
#define MSG_FILAMENT_CHANGE_LOAD_2 "filament load" #define MSG_FILAMENT_CHANGE_LOAD_2 "wlozenie filamentu"
#define MSG_FILAMENT_CHANGE_LOAD_3 "" #define MSG_FILAMENT_CHANGE_LOAD_3 ""
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Wait for" #define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Czekam na"
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "filament extrude" #define MSG_FILAMENT_CHANGE_EXTRUDE_2 "ekstruzje filamentu"
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 "" #define MSG_FILAMENT_CHANGE_EXTRUDE_3 ""
#define MSG_FILAMENT_CHANGE_RESUME_1 "Wait for print" #define MSG_FILAMENT_CHANGE_RESUME_1 "Czekam na"
#define MSG_FILAMENT_CHANGE_RESUME_2 "to resume" #define MSG_FILAMENT_CHANGE_RESUME_2 "wznowienie druku"
#define MSG_FILAMENT_CHANGE_RESUME_3 "" #define MSG_FILAMENT_CHANGE_RESUME_3 ""
#else // LCD_HEIGHT < 4 #else // LCD_HEIGHT < 4
#define MSG_FILAMENT_CHANGE_INIT_1 "Please wait..." #define MSG_FILAMENT_CHANGE_INIT_1 "Prosze czekac..."
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Ejecting..." #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Wysuwanie..."
#define MSG_FILAMENT_CHANGE_INSERT_1 "Insert and Click" #define MSG_FILAMENT_CHANGE_INSERT_1 "Wloz i nacisnij prz."
#define MSG_FILAMENT_CHANGE_LOAD_1 "Loading..." #define MSG_FILAMENT_CHANGE_LOAD_1 "Ladowanie..."
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Extruding..." #define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Ekstruzja..."
#define MSG_FILAMENT_CHANGE_RESUME_1 "Resuming..." #define MSG_FILAMENT_CHANGE_RESUME_1 "Wznowienie..."
#endif // LCD_HEIGHT < 4 #endif // LCD_HEIGHT < 4
#endif // LANGUAGE_PL_H #endif // LANGUAGE_PL_H

Loading…
Cancel
Save