diff --git a/Marlin/language_pl.h b/Marlin/language_pl.h index 39cef81f94..e661164c9a 100644 --- a/Marlin/language_pl.h +++ b/Marlin/language_pl.h @@ -157,15 +157,15 @@ #define MSG_HEATING_FAILED_LCD "Rozgrz. nieudane" #define MSG_ERR_REDUNDANT_TEMP "Blad temperatury" #define MSG_THERMAL_RUNAWAY "Zanik temp." -#define MSG_ERR_MAXTEMP "Err: max. temp." -#define MSG_ERR_MINTEMP "Err: min. temp." -#define MSG_ERR_MAXTEMP_BED "Err: max. temp. loza" -#define MSG_ERR_MINTEMP_BED "Err: min. temp. loza" +#define MSG_ERR_MAXTEMP "Err max temp" +#define MSG_ERR_MINTEMP "Err min temp" +#define MSG_ERR_MAXTEMP_BED "Err max temp stolu" +#define MSG_ERR_MINTEMP_BED "Err min temp stolu" #define MSG_ERR_Z_HOMING "G28 Z Forbidden" -#define MSG_HALTED "PRINTER HALTED" -#define MSG_PLEASE_RESET "Please reset" +#define MSG_HALTED "Drukarka zatrzym." +#define MSG_PLEASE_RESET "Prosze zresetowac" #define MSG_SHORT_DAY "d" // One character only -#define MSG_SHORT_HOUR "h" // One character only +#define MSG_SHORT_HOUR "g" // One character only #define MSG_SHORT_MINUTE "m" // One character only #define MSG_HEATING "Rozgrzewanie..." #define MSG_HEATING_COMPLETE "Rozgrzano" @@ -177,68 +177,68 @@ #define MSG_DELTA_CALIBRATE_Z "Kalibruj Z" #define MSG_DELTA_CALIBRATE_CENTER "Kalibruj środek" -#define MSG_INFO_MENU "About Printer" -#define MSG_INFO_PRINTER_MENU "Printer Info" -#define MSG_INFO_STATS_MENU "Printer Stats" +#define MSG_INFO_MENU "O drukarce" +#define MSG_INFO_PRINTER_MENU "Info drukarki" +#define MSG_INFO_STATS_MENU "Statystyki" #define MSG_INFO_BOARD_MENU "Board Info" -#define MSG_INFO_THERMISTOR_MENU "Thermistors" -#define MSG_INFO_EXTRUDERS "Extruders" -#define MSG_INFO_BAUDRATE "Baud" -#define MSG_INFO_PROTOCOL "Protocol" -#define MSG_LIGHTS_ON "Case light on" -#define MSG_LIGHTS_OFF "Case light off" +#define MSG_INFO_THERMISTOR_MENU "Thermistory" +#define MSG_INFO_EXTRUDERS "Ekstrudery" +#define MSG_INFO_BAUDRATE "Prędkosc USB" +#define MSG_INFO_PROTOCOL "Protokol" +#define MSG_LIGHTS_ON "Oswietlenie wl." +#define MSG_LIGHTS_OFF "Oswietlenie wyl." #if LCD_WIDTH >= 20 - #define MSG_INFO_PRINT_COUNT "Print Count" - #define MSG_INFO_COMPLETED_PRINTS "Completed" - #define MSG_INFO_PRINT_TIME "Total print time" - #define MSG_INFO_PRINT_LONGEST "Longest job time" - #define MSG_INFO_PRINT_FILAMENT "Extruded total" + #define MSG_INFO_PRINT_COUNT "Wydrukowano" + #define MSG_INFO_COMPLETED_PRINTS "Ukończono" + #define MSG_INFO_PRINT_TIME "Czas druku" + #define MSG_INFO_PRINT_LONGEST "Najdl. druk" + #define MSG_INFO_PRINT_FILAMENT "Uzyty fil." #else - #define MSG_INFO_PRINT_COUNT "Prints" - #define MSG_INFO_COMPLETED_PRINTS "Completed" - #define MSG_INFO_PRINT_TIME "Total" - #define MSG_INFO_PRINT_LONGEST "Longest" - #define MSG_INFO_PRINT_FILAMENT "Extruded" + #define MSG_INFO_PRINT_COUNT "Wydrukowano" + #define MSG_INFO_COMPLETED_PRINTS "Ukonczono" + #define MSG_INFO_PRINT_TIME "Razem" + #define MSG_INFO_PRINT_LONGEST "Najdl. druk" + #define MSG_INFO_PRINT_FILAMENT "Uzyty fil." #endif #define MSG_INFO_MIN_TEMP "Min Temp" #define MSG_INFO_MAX_TEMP "Max Temp" -#define MSG_INFO_PSU "Power Supply" +#define MSG_INFO_PSU "Zasilacz" -#define MSG_DRIVE_STRENGTH "Drive Strength" -#define MSG_DAC_PERCENT "Driver %" -#define MSG_DAC_EEPROM_WRITE "DAC EEPROM Write" -#define MSG_FILAMENT_CHANGE_HEADER "CHANGE FILAMENT" -#define MSG_FILAMENT_CHANGE_OPTION_HEADER "CHANGE OPTIONS:" -#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extrude more" -#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Resume print" +#define MSG_DRIVE_STRENGTH "Siła silnika" +#define MSG_DAC_PERCENT "Siła %" +#define MSG_DAC_EEPROM_WRITE "Zapisz DAC EEPROM" +#define MSG_FILAMENT_CHANGE_HEADER "ZMIEN FILAMENT" +#define MSG_FILAMENT_CHANGE_OPTION_HEADER "ZMIEN OPCJE:" +#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Ekstruduj wiecej" +#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Wznow drukowanie" #if LCD_HEIGHT >= 4 - #define MSG_FILAMENT_CHANGE_INIT_1 "Wait for start" - #define MSG_FILAMENT_CHANGE_INIT_2 "of the filament" - #define MSG_FILAMENT_CHANGE_INIT_3 "change" - #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Wait for" - #define MSG_FILAMENT_CHANGE_UNLOAD_2 "filament unload" + #define MSG_FILAMENT_CHANGE_INIT_1 "Czekam na " + #define MSG_FILAMENT_CHANGE_INIT_2 "zmiane filamentu" + #define MSG_FILAMENT_CHANGE_INIT_3 "" + #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Czekam na" + #define MSG_FILAMENT_CHANGE_UNLOAD_2 "wyjecie filamentu" #define MSG_FILAMENT_CHANGE_UNLOAD_3 "" - #define MSG_FILAMENT_CHANGE_INSERT_1 "Insert filament" - #define MSG_FILAMENT_CHANGE_INSERT_2 "and press button" - #define MSG_FILAMENT_CHANGE_INSERT_3 "to continue..." - #define MSG_FILAMENT_CHANGE_LOAD_1 "Wait for" - #define MSG_FILAMENT_CHANGE_LOAD_2 "filament load" + #define MSG_FILAMENT_CHANGE_INSERT_1 "Wloz filament" + #define MSG_FILAMENT_CHANGE_INSERT_2 "i nacisnij przycisk" + #define MSG_FILAMENT_CHANGE_INSERT_3 "aby kontynuowac..." + #define MSG_FILAMENT_CHANGE_LOAD_1 "Czekam na" + #define MSG_FILAMENT_CHANGE_LOAD_2 "wlozenie filamentu" #define MSG_FILAMENT_CHANGE_LOAD_3 "" - #define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Wait for" - #define MSG_FILAMENT_CHANGE_EXTRUDE_2 "filament extrude" + #define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Czekam na" + #define MSG_FILAMENT_CHANGE_EXTRUDE_2 "ekstruzje filamentu" #define MSG_FILAMENT_CHANGE_EXTRUDE_3 "" - #define MSG_FILAMENT_CHANGE_RESUME_1 "Wait for print" - #define MSG_FILAMENT_CHANGE_RESUME_2 "to resume" + #define MSG_FILAMENT_CHANGE_RESUME_1 "Czekam na" + #define MSG_FILAMENT_CHANGE_RESUME_2 "wznowienie druku" #define MSG_FILAMENT_CHANGE_RESUME_3 "" #else // LCD_HEIGHT < 4 - #define MSG_FILAMENT_CHANGE_INIT_1 "Please wait..." - #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Ejecting..." - #define MSG_FILAMENT_CHANGE_INSERT_1 "Insert and Click" - #define MSG_FILAMENT_CHANGE_LOAD_1 "Loading..." - #define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Extruding..." - #define MSG_FILAMENT_CHANGE_RESUME_1 "Resuming..." + #define MSG_FILAMENT_CHANGE_INIT_1 "Prosze czekac..." + #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Wysuwanie..." + #define MSG_FILAMENT_CHANGE_INSERT_1 "Wloz i nacisnij prz." + #define MSG_FILAMENT_CHANGE_LOAD_1 "Ladowanie..." + #define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Ekstruzja..." + #define MSG_FILAMENT_CHANGE_RESUME_1 "Wznowienie..." #endif // LCD_HEIGHT < 4 #endif // LANGUAGE_PL_H