🎨 Less use of undef for RAMPS pins

Marlin/src/pins/mega/pins_MEGATRONICS_3.h

@@ -67,9 +67,19 @@
 #define X_DIR_PIN                             57
 #define X_ENABLE_PIN                          59
 
-#define Y_STEP_PIN                             5
+#if ENABLED(REPRAPWORLD_KEYPAD) && EXTRUDERS <= 2
-#define Y_DIR_PIN                             17
+  #define Y_ENABLE_PIN                        23
-#define Y_ENABLE_PIN                           4
+  #define Y_STEP_PIN                          22
+  #define Y_DIR_PIN                           60
+#else
+  #define Y_STEP_PIN                           5
+  #define Y_DIR_PIN                           17
+  #define Y_ENABLE_PIN                         4
+
+  #define E2_STEP_PIN                         22
+  #define E2_DIR_PIN                          60
+  #define E2_ENABLE_PIN                       23
+#endif
 
 #define Z_STEP_PIN                            16
 #define Z_DIR_PIN                             11
@@ -83,10 +93,6 @@
 #define E1_DIR_PIN                            24
 #define E1_ENABLE_PIN                         26
 
-#define E2_STEP_PIN                           22
-#define E2_DIR_PIN                            60
-#define E2_ENABLE_PIN                         23
-
 //
 // Temperature Sensors
 //
@@ -181,15 +187,6 @@
 #elif EXTRUDERS <= 2
   // Hijack the last extruder so that we can get the PWM signal off the Y breakout
   // Move Y to the E2 plug. This makes dual Y steppers harder
-  #undef Y_ENABLE_PIN                             //  4
-  #undef Y_STEP_PIN                               //  5
-  #undef Y_DIR_PIN                                // 17
-  #undef E2_ENABLE_PIN                            // 23
-  #undef E2_STEP_PIN                              // 22
-  #undef E2_DIR_PIN                               // 60
-  #define Y_ENABLE_PIN                        23
-  #define Y_STEP_PIN                          22
-  #define Y_DIR_PIN                           60
   #define SPINDLE_LASER_PWM_PIN                4  // Hardware PWM
   #define SPINDLE_LASER_ENA_PIN               17  // Pullup!
   #define SPINDLE_DIR_PIN                      5

Marlin/src/pins/ramps/pins_3DRAG.h

@@ -37,6 +37,28 @@
   #define DEFAULT_SOURCE_CODE_URL "3dprint.elettronicain.it"
 #endif
 
+//
+// Limit Switches
+//
+#define Z_STOP_PIN                            18
+
+//
+// Steppers
+//
+#if HAS_CUTTER
+  #define Z_DIR_PIN                           28
+  #define Z_ENABLE_PIN                        24
+  #define Z_STEP_PIN                          26
+#else
+  #define Z_ENABLE_PIN                        63
+#endif
+
+#if HAS_CUTTER && !HAS_EXTRUDERS
+  #define E0_DIR_PIN                          -1
+  #define E0_ENABLE_PIN                       -1
+  #define E0_STEP_PIN                         -1
+#endif
+
 //
 // Heaters / Fans
 //
@@ -53,18 +75,54 @@
   #define CASE_LIGHT_PIN                      -1  // Hardware PWM but one is not available on expansion header
 #endif
 
-#include "pins_RAMPS.h"
+/**
-
+ *  M3/M4/M5 - Spindle/Laser Control
-//
+ *
-// Limit Switches
+ *  If you want to control the speed of your spindle then you'll have
-//
+ *  have to sacrifce the Extruder and pull some signals off the Z stepper
-#undef Z_MAX_PIN
+ *  driver socket.
+ *
+ *  The following assumes:
+ *   - the Z stepper driver socket is empty
+ *   - the extruder driver socket has a driver board plugged into it
+ *   - the Z stepper wires are attached the the extruder connector
+ *
+ *  If you want to keep the extruder AND don't have a LCD display then
+ *  you can still control the power on/off and spindle direction.
+ *
+ *  Where to get spindle signals
+ *
+ *      stepper signal           socket name       socket name
+ *                                          -------
+ *       SPINDLE_LASER_ENA_PIN    /ENABLE  O|     |O  VMOT
+ *                                    MS1  O|     |O  GND
+ *                                    MS2  O|     |O  2B
+ *                                    MS3  O|     |O  2A
+ *                                 /RESET  O|     |O  1A
+ *                                 /SLEEP  O|     |O  1B
+ *          SPINDLE_LASER_PWM_PIN    STEP  O|     |O  VDD
+ *                SPINDLE_DIR_PIN     DIR  O|     |O  GND
+ *                                          -------
+ *
+ *  Note: Socket names vary from vendor to vendor
+ */
+#if HAS_CUTTER
+  #if !HAS_EXTRUDERS
+    #define SPINDLE_LASER_PWM_PIN             46  // Hardware PWM
+    #define SPINDLE_LASER_ENA_PIN             62  // Pullup!
+    #define SPINDLE_DIR_PIN                   48
+  #elif !BOTH(IS_ULTRA_LCD, IS_NEWPANEL)          // Use expansion header if no LCD in use
+    #define SPINDLE_LASER_ENA_PIN             16  // Pullup or pulldown!
+    #define SPINDLE_DIR_PIN                   17
+    #if !NUM_SERVOS                               // Use servo connector if possible
+      #define SPINDLE_LASER_PWM_PIN            6  // Hardware PWM
+    #elif HAS_FREE_AUX2_PINS
+      #define SPINDLE_LASER_PWM_PIN           44  // Hardware PWM
+    #endif
+  #endif
+#endif
 
-//
+#include "pins_RAMPS.h"
-// Steppers
-//
-#undef Z_ENABLE_PIN
-#define Z_ENABLE_PIN                          63
 
 //
 // Heaters / Fans
@@ -113,58 +171,3 @@
   #define BOARD_ST7920_DELAY_2               188
   #define BOARD_ST7920_DELAY_3                 0
 #endif
-
-/**
- *  M3/M4/M5 - Spindle/Laser Control
- *
- *  If you want to control the speed of your spindle then you'll have
- *  have to sacrifce the Extruder and pull some signals off the Z stepper
- *  driver socket.
- *
- *  The following assumes:
- *   - the Z stepper driver socket is empty
- *   - the extruder driver socket has a driver board plugged into it
- *   - the Z stepper wires are attached the the extruder connector
- *
- *  If you want to keep the extruder AND don't have a LCD display then
- *  you can still control the power on/off and spindle direction.
- *
- *  Where to get spindle signals
- *
- *      stepper signal           socket name       socket name
- *                                          -------
- *       SPINDLE_LASER_ENA_PIN    /ENABLE  O|     |O  VMOT
- *                                    MS1  O|     |O  GND
- *                                    MS2  O|     |O  2B
- *                                    MS3  O|     |O  2A
- *                                 /RESET  O|     |O  1A
- *                                 /SLEEP  O|     |O  1B
- *          SPINDLE_LASER_PWM_PIN    STEP  O|     |O  VDD
- *                SPINDLE_DIR_PIN     DIR  O|     |O  GND
- *                                          -------
- *
- *  Note: Socket names vary from vendor to vendor
- */
-#undef SPINDLE_LASER_PWM_PIN                      // Definitions in pins_RAMPS.h are not good with 3DRAG
-#undef SPINDLE_LASER_ENA_PIN
-#undef SPINDLE_DIR_PIN
-
-#if HAS_CUTTER
-  #if !HAS_EXTRUDERS
-    #undef E0_DIR_PIN
-    #undef E0_ENABLE_PIN
-    #undef E0_STEP_PIN
-    #undef Z_DIR_PIN
-    #undef Z_ENABLE_PIN
-    #undef Z_STEP_PIN
-    #define Z_DIR_PIN                         28
-    #define Z_ENABLE_PIN                      24
-    #define Z_STEP_PIN                        26
-    #define SPINDLE_LASER_PWM_PIN             46  // Hardware PWM
-    #define SPINDLE_LASER_ENA_PIN             62  // Pullup!
-    #define SPINDLE_DIR_PIN                   48
-  #elif !BOTH(IS_ULTRA_LCD, IS_NEWPANEL)          // Use expansion header if no LCD in use
-    #define SPINDLE_LASER_ENA_PIN             16  // Pullup or pulldown!
-    #define SPINDLE_DIR_PIN                   17
-  #endif
-#endif

Marlin/src/pins/ramps/pins_BQ_ZUM_MEGA_3D.h

@@ -30,6 +30,41 @@
 
 #define BOARD_INFO_NAME "ZUM Mega 3D"
 
+//
+// Limit Switches
+//
+#define X_MAX_PIN                             79
+
+// This board has headers for Z-min, Z-max and IND_S_5V *but* as the bq team
+// decided to ship the printer only with the probe and no additional Z-min
+// endstop and the instruction manual advises the user to connect the probe to
+// IND_S_5V the option Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN will not work.
+#if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
+  #define Z_MIN_PIN                           19  // IND_S_5V
+  #define Z_MAX_PIN                           18  // Z-MIN Label
+#endif
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+  #define Z_MIN_PROBE_PIN                     19  // IND_S_5V
+#endif
+
+//
+// Steppers
+//
+#define Z_ENABLE_PIN                          77
+
+#define DIGIPOTSS_PIN                         22
+#define DIGIPOT_CHANNELS { 4, 5, 3, 0, 1 }
+
+//
+// Temperature Sensors
+//
+#define TEMP_1_PIN                            14  // Analog Input
+#define TEMP_BED_PIN                          15  // Analog Input
+
 //
 // Heaters / Fans
 //
@@ -61,61 +96,27 @@
 #define SPINDLE_LASER_PWM_PIN                 44  // Hardware PWM
 #define SPINDLE_DIR_PIN                       42
 
-//
-// Limit Switches
-//
-#define X_MAX_PIN                             79  // 2
-
-//
-// Import RAMPS 1.3 pins
-//
-#include "pins_RAMPS_13.h"
-
-//
-// Z Probe (when not Z_MIN_PIN)
-//
-#undef Z_MIN_PROBE_PIN
-#define Z_MIN_PROBE_PIN                       19  // IND_S_5V
-
-#undef Z_ENABLE_PIN
-#define Z_ENABLE_PIN                          77  // 62
-
-//
-// Steppers
-//
-#define DIGIPOTSS_PIN                         22
-#define DIGIPOT_CHANNELS { 4, 5, 3, 0, 1 }
-
-//
-// Temperature Sensors
-//
-#undef TEMP_1_PIN
-#define TEMP_1_PIN                            14  // Analog Input (15)
-
-#undef TEMP_BED_PIN
-#define TEMP_BED_PIN                          15  // Analog Input (14)
-
 //
 // Misc. Functions
 //
-#undef PS_ON_PIN                                  // 12
 #define PS_ON_PIN                             81  // External Power Supply
 
 #ifndef CASE_LIGHT_PIN
   #define CASE_LIGHT_PIN                      44  // Hardware PWM
 #endif
 
-// This board has headers for Z-min, Z-max and IND_S_5V *but* as the bq team
+// Alter timing for graphical display
-// decided to ship the printer only with the probe and no additional Z-min
+#if ENABLED(U8GLIB_ST7920)
-// endstop and the instruction manual advises the user to connect the probe to
+  #define BOARD_ST7920_DELAY_1                 0
-// IND_S_5V the option Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN will not work.
+  #define BOARD_ST7920_DELAY_2                 0
-#ifdef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
+  #define BOARD_ST7920_DELAY_3               189
-  #undef Z_MIN_PIN
-  #undef Z_MAX_PIN
-  #define Z_MIN_PIN                           19  // IND_S_5V
-  #define Z_MAX_PIN                           18  // Z-MIN Label
 #endif
 
+//
+// Import RAMPS 1.3 pins
+//
+#include "pins_RAMPS_13.h"
+
 //
 // Used by the Hephestos 2 heated bed upgrade kit
 //
@@ -123,10 +124,3 @@
   #undef HEATER_BED_PIN
   #define HEATER_BED_PIN                       8
 #endif
-
-// Alter timing for graphical display
-#if ENABLED(U8GLIB_ST7920)
-  #define BOARD_ST7920_DELAY_1                 0
-  #define BOARD_ST7920_DELAY_2                 0
-  #define BOARD_ST7920_DELAY_3               189
-#endif

Marlin/src/pins/ramps/pins_K8400.h

@@ -35,7 +35,14 @@
 #define BOARD_INFO_NAME         "K8400"
 #define DEFAULT_MACHINE_NAME    "Vertex"
 
-#include "pins_3DRAG.h"
+//
+// Steppers
+//
+#if HAS_CUTTER
+  #define Z_STEP_PIN                          32
+#endif
+
+#define E1_STEP_PIN                           32
 
 //
 // Limit Switches
@@ -43,16 +50,7 @@
 #define X_STOP_PIN                             3
 #define Y_STOP_PIN                            14
 
-#undef X_MIN_PIN
+#include "pins_3DRAG.h"
-#undef X_MAX_PIN
-#undef Y_MIN_PIN
-#undef Y_MAX_PIN
-
-//
-// Steppers
-//
-#undef E1_STEP_PIN
-#define E1_STEP_PIN                           32
 
 //
 // Heaters / Fans
@@ -66,8 +64,3 @@
 #undef PS_ON_PIN
 #undef KILL_PIN
 #undef SD_DETECT_PIN
-
-#if Z_STEP_PIN == 26
-  #undef Z_STEP_PIN
-  #define Z_STEP_PIN                          32
-#endif

Marlin/src/pins/ramps/pins_K8600.h

@@ -40,6 +40,11 @@
 #define Z_MAX_PIN                             18
 #define Z_MIN_PIN                             -1
 
+//
+// Steppers
+//
+#define Z_ENABLE_PIN                          63
+
 //
 // Heaters / Fans
 //
@@ -57,12 +62,6 @@
 #define IS_RAMPS_EFB                              // Override autodetection. Bed will be undefined.
 #include "pins_RAMPS.h"
 
-//
-// Steppers
-//
-#undef Z_ENABLE_PIN
-#define Z_ENABLE_PIN                          63
-
 //
 // Heaters / Fans
 //

Marlin/src/pins/ramps/pins_LONGER3D_LKx_PRO.h

@@ -82,38 +82,39 @@
   #define Z_MAX_PIN                           37
 #endif
 
+#undef CHANGE_Y_LIMIT_PINS
+
 //
-// Z Probe (when not Z_MIN_PIN)
+// Steppers - No E1 pins
 //
-#define Z_MIN_PROBE_PIN                       -1
+#define E1_STEP_PIN                           -1
+#define E1_DIR_PIN                            -1
+#define E1_ENABLE_PIN                         -1
+#define E1_CS_PIN                             -1
 
 //
-// Misc. Functions
+// Z Probe (when not Z_MIN_PIN)
 //
-#define SD_DETECT_PIN                         49
+#define Z_MIN_PROBE_PIN                       -1
-#define FIL_RUNOUT_PIN                         2
 
 //
-// Other RAMPS 1.3 pins
+// Temperature Sensors
 //
-#define IS_RAMPS_EFB                              // Override autodetection. Bed will be undefined.
+#define TEMP_1_PIN                            -1
-#include "pins_RAMPS_13.h"
 
 //
-// Steppers
+// Průša i3 MK2 Multiplexer Support
 //
-#undef E1_STEP_PIN
+#define E_MUX2_PIN                            -1
-#undef E1_DIR_PIN
-#undef E1_ENABLE_PIN
-#undef E1_CS_PIN
 
 //
-// Temperature Sensors
+// Misc. Functions
 //
-#undef TEMP_1_PIN
+#define SD_DETECT_PIN                         49
+#define FIL_RUNOUT_PIN                         2
 
 //
-// Průša i3 MK2 Multiplexer Support
+// Other RAMPS 1.3 pins
 //
-#undef E_MUX2_PIN
+#define IS_RAMPS_EFB                              // Override autodetection. Bed will be undefined.
-#undef CHANGE_Y_LIMIT_PINS
+#include "pins_RAMPS_13.h"

Marlin/src/pins/ramps/pins_ORTUR_4.h

@@ -45,7 +45,14 @@
 //
 // Steppers
 //
+#define E0_STEP_PIN                           36
+#define E0_DIR_PIN                            34
+#define E0_ENABLE_PIN                         30
 #define E0_CS_PIN                             44
+
+#define E1_STEP_PIN                           26
+#define E1_DIR_PIN                            28
+#define E1_ENABLE_PIN                         24
 #define E1_CS_PIN                             42
 
 //
@@ -70,23 +77,6 @@
 
 #include "pins_RAMPS.h"
 
-//
-// Steppers
-//
-#undef E0_STEP_PIN
-#undef E0_DIR_PIN
-#undef E0_ENABLE_PIN
-#define E0_STEP_PIN                           36
-#define E0_DIR_PIN                            34
-#define E0_ENABLE_PIN                         30
-
-#undef E1_STEP_PIN
-#undef E1_DIR_PIN
-#undef E1_ENABLE_PIN
-#define E1_STEP_PIN                           26
-#define E1_DIR_PIN                            28
-#define E1_ENABLE_PIN                         24
-
 //
 // LCD / Controller
 //

Marlin/src/pins/ramps/pins_RAMPS.h

@@ -133,22 +133,38 @@
 #ifndef Z_STEP_PIN
   #define Z_STEP_PIN                          46
 #endif
-#define Z_DIR_PIN                             48
+#ifndef Z_DIR_PIN
-#define Z_ENABLE_PIN                          62
+  #define Z_DIR_PIN                           48
+#endif
+#ifndef Z_ENABLE_PIN
+  #define Z_ENABLE_PIN                        62
+#endif
 #ifndef Z_CS_PIN
   #define Z_CS_PIN                            40
 #endif
 
-#define E0_STEP_PIN                           26
+#ifndef E0_STEP_PIN
-#define E0_DIR_PIN                            28
+  #define E0_STEP_PIN                         26
-#define E0_ENABLE_PIN                         24
+#endif
+#ifndef E0_DIR_PIN
+  #define E0_DIR_PIN                          28
+#endif
+#ifndef E0_ENABLE_PIN
+  #define E0_ENABLE_PIN                       24
+#endif
 #ifndef E0_CS_PIN
   #define E0_CS_PIN                           42
 #endif
 
-#define E1_STEP_PIN                           36
+#ifndef E1_STEP_PIN
-#define E1_DIR_PIN                            34
+  #define E1_STEP_PIN                         36
-#define E1_ENABLE_PIN                         30
+#endif
+#ifndef E1_DIR_PIN
+  #define E1_DIR_PIN                          34
+#endif
+#ifndef E1_ENABLE_PIN
+  #define E1_ENABLE_PIN                       30
+#endif
 #ifndef E1_CS_PIN
   #define E1_CS_PIN                           44
 #endif
@@ -219,10 +235,10 @@
   #define FAN1_PIN                  RAMPS_D8_PIN
 #elif DISABLED(IS_RAMPS_SF)                       // Not Spindle, Fan (i.e., "EFBF" or "EFBE")
   #define HEATER_BED_PIN            RAMPS_D8_PIN
-  #if HOTENDS == 1 && DISABLED(HEATERS_PARALLEL)
+  #if EITHER(HAS_MULTI_HOTEND, HEATERS_PARALLEL)
-    #define FAN1_PIN                MOSFET_D_PIN
-  #else
     #define HEATER_1_PIN            MOSFET_D_PIN
+  #else
+    #define FAN1_PIN                MOSFET_D_PIN
   #endif
 #endif
 

Marlin/src/pins/ramps/pins_RAMPS_PLUS.h

@@ -44,32 +44,25 @@
 #define RAMPS_D8_PIN                          10
 #define RAMPS_D10_PIN                          8
 
-#include "pins_RAMPS.h"
-
 //
-// Steppers - Swap E0 / E1 on 3DYMY
+// Steppers
 //
-#undef E0_STEP_PIN
+#define X_CS_PIN                              -1
-#undef E0_DIR_PIN
+#define Y_CS_PIN                              -1
-#undef E0_ENABLE_PIN
+#define Z_CS_PIN                              -1
-
-#undef E1_STEP_PIN
-#undef E1_DIR_PIN
-#undef E1_ENABLE_PIN
 
+// Swap E0 / E1 on 3DYMY
 #define E0_STEP_PIN                           36
 #define E0_DIR_PIN                            34
 #define E0_ENABLE_PIN                         30
+#define E0_CS_PIN                             -1
 
 #define E1_STEP_PIN                           26
 #define E1_DIR_PIN                            28
 #define E1_ENABLE_PIN                         24
+#define E1_CS_PIN                             -1
 
-#undef X_CS_PIN
+#include "pins_RAMPS.h"
-#undef Y_CS_PIN
-#undef Z_CS_PIN
-#undef E0_CS_PIN
-#undef E1_CS_PIN
 
 #if IS_ULTRA_LCD && NONE(REPRAPWORLD_GRAPHICAL_LCD, CR10_STOCKDISPLAY) && !BOTH(IS_NEWPANEL, PANEL_ONE)
   #if DISABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306)

Marlin/src/pins/ramps/pins_RIGIDBOARD.h

@@ -29,6 +29,18 @@
   #define BOARD_INFO_NAME "RigidBoard"
 #endif
 
+//
+// Steppers
+// RigidBot swaps E0 / E1 plugs vs RAMPS 1.3
+//
+#define E0_STEP_PIN                           36
+#define E0_DIR_PIN                            34
+#define E0_ENABLE_PIN                         30
+
+#define E1_STEP_PIN                           26
+#define E1_DIR_PIN                            28
+#define E1_ENABLE_PIN                         24
+
 //
 // Z Probe (when not Z_MIN_PIN)
 //
@@ -45,24 +57,6 @@
 
 #include "pins_RAMPS.h"
 
-//
-// Steppers
-//
-// RigidBot swaps E0 / E1 plugs vs RAMPS 1.3
-#undef E0_STEP_PIN
-#undef E0_DIR_PIN
-#undef E0_ENABLE_PIN
-#define E0_STEP_PIN                           36
-#define E0_DIR_PIN                            34
-#define E0_ENABLE_PIN                         30
-
-#undef E1_STEP_PIN
-#undef E1_DIR_PIN
-#undef E1_ENABLE_PIN
-#define E1_STEP_PIN                           26
-#define E1_DIR_PIN                            28
-#define E1_ENABLE_PIN                         24
-
 #define STEPPER_RESET_PIN                     41  // Stepper drivers have a reset on RigidBot
 
 //

Marlin/src/pins/ramps/pins_TRIGORILLA_13.h

@@ -29,6 +29,12 @@
 
 #define IS_RAMPS_EFB
 #define RAMPS_D9_PIN                         44
+
+#define E1_STEP_PIN                          -1
+#define E1_DIR_PIN                           -1
+#define E1_ENABLE_PIN                        -1
+#define E1_CS_PIN                            -1
+
 #define FAN2_PIN                              9
 
 #ifndef E0_AUTO_FAN_PIN
@@ -36,8 +42,3 @@
 #endif
 
 #include "pins_RAMPS_13.h"
-
-#undef E1_STEP_PIN
-#undef E1_DIR_PIN
-#undef E1_ENABLE_PIN
-#undef E1_CS_PIN