Browse Source

Merge pull request #2116 from AnHardt/wording

transpire -> expire
pull/1/head
Scott Lahteine 10 years ago
parent
commit
94de1e0d93
  1. 2
      Marlin/Configuration_adv.h
  2. 2
      Marlin/configurator/config/Configuration_adv.h
  3. 2
      Marlin/example_configurations/Felix/Configuration_adv.h
  4. 2
      Marlin/example_configurations/Hephestos/Configuration_adv.h
  5. 2
      Marlin/example_configurations/K8200/Configuration_adv.h
  6. 2
      Marlin/example_configurations/SCARA/Configuration_adv.h
  7. 2
      Marlin/example_configurations/WITBOX/Configuration_adv.h
  8. 2
      Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
  9. 2
      Marlin/example_configurations/delta/generic/Configuration_adv.h
  10. 2
      Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
  11. 2
      Marlin/example_configurations/makibox/Configuration_adv.h
  12. 2
      Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h

2
Marlin/Configuration_adv.h

@ -23,7 +23,7 @@
/** /**
* Whenever an M104 or M109 increases the target temperature the firmware will wait for the * Whenever an M104 or M109 increases the target temperature the firmware will wait for the
* WATCH_TEMP_PERIOD to transpire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE * WATCH_TEMP_PERIOD to expire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE
* degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109, * degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109,
* but only if the current temperature is far enough below the target for a reliable test. * but only if the current temperature is far enough below the target for a reliable test.
*/ */

2
Marlin/configurator/config/Configuration_adv.h

@ -23,7 +23,7 @@
/** /**
* Whenever an M104 or M109 increases the target temperature the firmware will wait for the * Whenever an M104 or M109 increases the target temperature the firmware will wait for the
* WATCH_TEMP_PERIOD to transpire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE * WATCH_TEMP_PERIOD to expire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE
* degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109, * degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109,
* but only if the current temperature is far enough below the target for a reliable test. * but only if the current temperature is far enough below the target for a reliable test.
*/ */

2
Marlin/example_configurations/Felix/Configuration_adv.h

@ -23,7 +23,7 @@
/** /**
* Whenever an M104 or M109 increases the target temperature the firmware will wait for the * Whenever an M104 or M109 increases the target temperature the firmware will wait for the
* WATCH_TEMP_PERIOD to transpire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE * WATCH_TEMP_PERIOD to expire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE
* degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109, * degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109,
* but only if the current temperature is far enough below the target for a reliable test. * but only if the current temperature is far enough below the target for a reliable test.
*/ */

2
Marlin/example_configurations/Hephestos/Configuration_adv.h

@ -23,7 +23,7 @@
/** /**
* Whenever an M104 or M109 increases the target temperature the firmware will wait for the * Whenever an M104 or M109 increases the target temperature the firmware will wait for the
* WATCH_TEMP_PERIOD to transpire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE * WATCH_TEMP_PERIOD to expire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE
* degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109, * degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109,
* but only if the current temperature is far enough below the target for a reliable test. * but only if the current temperature is far enough below the target for a reliable test.
*/ */

2
Marlin/example_configurations/K8200/Configuration_adv.h

@ -23,7 +23,7 @@
/** /**
* Whenever an M104 or M109 increases the target temperature the firmware will wait for the * Whenever an M104 or M109 increases the target temperature the firmware will wait for the
* WATCH_TEMP_PERIOD to transpire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE * WATCH_TEMP_PERIOD to expire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE
* degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109, * degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109,
* but only if the current temperature is far enough below the target for a reliable test. * but only if the current temperature is far enough below the target for a reliable test.
*/ */

2
Marlin/example_configurations/SCARA/Configuration_adv.h

@ -23,7 +23,7 @@
/** /**
* Whenever an M104 or M109 increases the target temperature the firmware will wait for the * Whenever an M104 or M109 increases the target temperature the firmware will wait for the
* WATCH_TEMP_PERIOD to transpire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE * WATCH_TEMP_PERIOD to expire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE
* degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109, * degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109,
* but only if the current temperature is far enough below the target for a reliable test. * but only if the current temperature is far enough below the target for a reliable test.
*/ */

2
Marlin/example_configurations/WITBOX/Configuration_adv.h

@ -23,7 +23,7 @@
/** /**
* Whenever an M104 or M109 increases the target temperature the firmware will wait for the * Whenever an M104 or M109 increases the target temperature the firmware will wait for the
* WATCH_TEMP_PERIOD to transpire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE * WATCH_TEMP_PERIOD to expire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE
* degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109, * degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109,
* but only if the current temperature is far enough below the target for a reliable test. * but only if the current temperature is far enough below the target for a reliable test.
*/ */

2
Marlin/example_configurations/delta/biv2.5/Configuration_adv.h

@ -23,7 +23,7 @@
/** /**
* Whenever an M104 or M109 increases the target temperature the firmware will wait for the * Whenever an M104 or M109 increases the target temperature the firmware will wait for the
* WATCH_TEMP_PERIOD to transpire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE * WATCH_TEMP_PERIOD to expire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE
* degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109, * degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109,
* but only if the current temperature is far enough below the target for a reliable test. * but only if the current temperature is far enough below the target for a reliable test.
*/ */

2
Marlin/example_configurations/delta/generic/Configuration_adv.h

@ -23,7 +23,7 @@
/** /**
* Whenever an M104 or M109 increases the target temperature the firmware will wait for the * Whenever an M104 or M109 increases the target temperature the firmware will wait for the
* WATCH_TEMP_PERIOD to transpire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE * WATCH_TEMP_PERIOD to expire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE
* degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109, * degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109,
* but only if the current temperature is far enough below the target for a reliable test. * but only if the current temperature is far enough below the target for a reliable test.
*/ */

2
Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h

@ -23,7 +23,7 @@
/** /**
* Whenever an M104 or M109 increases the target temperature the firmware will wait for the * Whenever an M104 or M109 increases the target temperature the firmware will wait for the
* WATCH_TEMP_PERIOD to transpire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE * WATCH_TEMP_PERIOD to expire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE
* degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109, * degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109,
* but only if the current temperature is far enough below the target for a reliable test. * but only if the current temperature is far enough below the target for a reliable test.
*/ */

2
Marlin/example_configurations/makibox/Configuration_adv.h

@ -23,7 +23,7 @@
/** /**
* Whenever an M104 or M109 increases the target temperature the firmware will wait for the * Whenever an M104 or M109 increases the target temperature the firmware will wait for the
* WATCH_TEMP_PERIOD to transpire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE * WATCH_TEMP_PERIOD to expire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE
* degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109, * degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109,
* but only if the current temperature is far enough below the target for a reliable test. * but only if the current temperature is far enough below the target for a reliable test.
*/ */

2
Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h

@ -23,7 +23,7 @@
/** /**
* Whenever an M104 or M109 increases the target temperature the firmware will wait for the * Whenever an M104 or M109 increases the target temperature the firmware will wait for the
* WATCH_TEMP_PERIOD to transpire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE * WATCH_TEMP_PERIOD to expire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE
* degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109, * degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109,
* but only if the current temperature is far enough below the target for a reliable test. * but only if the current temperature is far enough below the target for a reliable test.
*/ */

Loading…
Cancel
Save