Browse Source

Cast celsius to int for MKS LVGL UI (#21502)

vanilla_fb_2.0.x
Malderin 4 years ago
committed by Scott Lahteine
parent
commit
93dfd411fc
  1. 2
      Marlin/src/lcd/extui/lib/mks_ui/draw_extrusion.cpp
  2. 2
      Marlin/src/lcd/extui/lib/mks_ui/draw_filament_change.cpp
  3. 13
      Marlin/src/lcd/extui/lib/mks_ui/draw_preHeat.cpp
  4. 6
      Marlin/src/lcd/extui/lib/mks_ui/draw_printing.cpp
  5. 30
      Marlin/src/lcd/extui/lib/mks_ui/draw_ready_print.cpp
  6. 12
      Marlin/src/lcd/extui/lib/mks_ui/wifi_module.cpp

2
Marlin/src/lcd/extui/lib/mks_ui/draw_extrusion.cpp

@ -195,7 +195,7 @@ void disp_ext_speed() {
void disp_hotend_temp() {
char buf[20] = {0};
sprintf(buf, extrude_menu.temp_value, thermalManager.degHotend(uiCfg.extruderIndex), thermalManager.degTargetHotend(uiCfg.extruderIndex));
sprintf(buf, extrude_menu.temp_value, (int)thermalManager.degHotend(uiCfg.extruderIndex), (int)thermalManager.degTargetHotend(uiCfg.extruderIndex));
strcpy(public_buf_l, extrude_menu.temper_text);
strcat(public_buf_l, buf);
lv_label_set_text(tempText, public_buf_l);

2
Marlin/src/lcd/extui/lib/mks_ui/draw_filament_change.cpp

@ -154,7 +154,7 @@ void disp_filament_temp() {
public_buf_l[0] = '\0';
strcat(public_buf_l, uiCfg.extruderIndex < 1 ? preheat_menu.ext1 : preheat_menu.ext2);
sprintf(buf, preheat_menu.value_state, thermalManager.degHotend(uiCfg.extruderIndex), thermalManager.degTargetHotend(uiCfg.extruderIndex));
sprintf(buf, preheat_menu.value_state, (int)thermalManager.degHotend(uiCfg.extruderIndex), (int)thermalManager.degTargetHotend(uiCfg.extruderIndex));
strcat_P(public_buf_l, PSTR(": "));
strcat(public_buf_l, buf);

13
Marlin/src/lcd/extui/lib/mks_ui/draw_preHeat.cpp

@ -62,15 +62,15 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
thermalManager.setTargetHotend(max_target, uiCfg.extruderIndex);
thermalManager.start_watching_hotend(uiCfg.extruderIndex);
}
#if HAS_HEATED_BED
else {
#if HAS_HEATED_BED
constexpr int16_t max_target = BED_MAXTEMP - (WATCH_BED_TEMP_INCREASE + TEMP_BED_HYSTERESIS + 1);
thermalManager.temp_bed.target += uiCfg.stepHeat;
if (thermalManager.degTargetBed() > max_target)
thermalManager.setTargetBed(max_target);
thermalManager.start_watching_bed();
}
#endif
}
disp_desire_temp();
} break;
@ -212,19 +212,18 @@ void disp_temp_type() {
void disp_desire_temp() {
char buf[20] = { 0 };
public_buf_l[0] = '\0';
if (uiCfg.curTempType == 0) {
strcat(public_buf_l, uiCfg.extruderIndex < 1 ? preheat_menu.ext1 : preheat_menu.ext2);
sprintf(buf, preheat_menu.value_state, thermalManager.degHotend(uiCfg.extruderIndex), thermalManager.degTargetHotend(uiCfg.extruderIndex));
sprintf(buf, preheat_menu.value_state, (int)thermalManager.degHotend(uiCfg.extruderIndex), (int)thermalManager.degTargetHotend(uiCfg.extruderIndex));
}
#if HAS_HEATED_BED
else {
#if HAS_HEATED_BED
strcat(public_buf_l, preheat_menu.hotbed);
sprintf(buf, preheat_menu.value_state, thermalManager.degBed(), thermalManager.degTargetBed());
}
sprintf(buf, preheat_menu.value_state, (int)thermalManager.degBed(), (int)thermalManager.degTargetBed());
#endif
}
strcat_P(public_buf_l, PSTR(": "));
strcat(public_buf_l, buf);
lv_label_set_text(tempText1, public_buf_l);

6
Marlin/src/lcd/extui/lib/mks_ui/draw_printing.cpp

@ -219,18 +219,18 @@ void lv_draw_printing() {
}
void disp_ext_temp() {
sprintf(public_buf_l, printing_menu.temp1, thermalManager.degHotend(0), thermalManager.degTargetHotend(0));
sprintf(public_buf_l, printing_menu.temp1, (int)thermalManager.degHotend(0), (int)thermalManager.degTargetHotend(0));
lv_label_set_text(labelExt1, public_buf_l);
#if HAS_MULTI_EXTRUDER
sprintf(public_buf_l, printing_menu.temp1, thermalManager.degHotend(1), thermalManager.degTargetHotend(1));
sprintf(public_buf_l, printing_menu.temp1, (int)thermalManager.degHotend(1), (int)thermalManager.degTargetHotend(1));
lv_label_set_text(labelExt2, public_buf_l);
#endif
}
void disp_bed_temp() {
#if HAS_HEATED_BED
sprintf(public_buf_l, printing_menu.bed_temp, thermalManager.degBed(), thermalManager.degTargetBed());
sprintf(public_buf_l, printing_menu.bed_temp, (int)thermalManager.degBed(), (int)thermalManager.degTargetBed());
lv_label_set_text(labelBed, public_buf_l);
#endif
}

30
Marlin/src/lcd/extui/lib/mks_ui/draw_ready_print.cpp

@ -105,14 +105,14 @@ void disp_det_error() {
lv_obj_t *e1, *e2, *e3, *bed;
void mks_disp_test() {
char buf[30] = {0};
sprintf_P(buf, PSTR("e1:%d"), thermalManager.degHotend(0));
sprintf_P(buf, PSTR("e1:%d"), (int)thermalManager.degHotend(0));
lv_label_set_text(e1, buf);
#if HAS_MULTI_HOTEND
sprintf_P(buf, PSTR("e2:%d"), thermalManager.degHotend(1));
sprintf_P(buf, PSTR("e2:%d"), (int)thermalManager.degHotend(1));
lv_label_set_text(e2, buf);
#endif
#if HAS_HEATED_BED
sprintf_P(buf, PSTR("bed:%d"), thermalManager.degBed());
sprintf_P(buf, PSTR("bed:%d"), (int)thermalManager.degBed());
lv_label_set_text(bed, buf);
#endif
}
@ -139,20 +139,20 @@ void lv_draw_ready_print() {
e1 = lv_label_create_empty(scr);
lv_obj_set_pos(e1, 20, 20);
sprintf_P(buf, PSTR("e1: %d"), thermalManager.degHotend(0));
sprintf_P(buf, PSTR("e1: %d"), (int)thermalManager.degHotend(0));
lv_label_set_text(e1, buf);
#if HAS_MULTI_HOTEND
e2 = lv_label_create_empty(scr);
lv_obj_set_pos(e2, 20, 45);
sprintf_P(buf, PSTR("e1: %d"), thermalManager.degHotend(1));
sprintf_P(buf, PSTR("e1: %d"), (int)thermalManager.degHotend(1));
lv_label_set_text(e2, buf);
#endif
#if HAS_HEATED_BED
bed = lv_label_create_empty(scr);
lv_obj_set_pos(bed, 20, 95);
sprintf_P(buf, PSTR("bed: %d"), thermalManager.degBed());
sprintf_P(buf, PSTR("bed: %d"), (int)thermalManager.degBed());
lv_label_set_text(bed, buf);
#endif
@ -208,27 +208,27 @@ void lv_draw_ready_print() {
labelFan = lv_label_create(scr, 380, 80, nullptr);
sprintf_P(buf, PSTR("%d"), thermalManager.degHotend(0));
sprintf_P(buf, PSTR("%d"), (int)thermalManager.degHotend(0));
lv_label_set_text(labelExt1, buf);
lv_obj_align(labelExt1, buttonExt1, LV_ALIGN_CENTER, 0, LABEL_MOD_Y);
sprintf_P(buf, PSTR("-> %d"), thermalManager.degTargetHotend(0));
sprintf_P(buf, PSTR("-> %d"), (int)thermalManager.degTargetHotend(0));
lv_label_set_text(labelExt1Target, buf);
lv_obj_align(labelExt1Target, buttonExt1, LV_ALIGN_CENTER, 0, TARGET_LABEL_MOD_Y);
#if HAS_MULTI_EXTRUDER
sprintf_P(buf, PSTR("%d"), thermalManager.degHotend(1));
sprintf_P(buf, PSTR("%d"), (int)thermalManager.degHotend(1));
lv_label_set_text(labelExt2, buf);
lv_obj_align(labelExt2, buttonExt2, LV_ALIGN_CENTER, 0, LABEL_MOD_Y);
sprintf_P(buf, PSTR("-> %d"), thermalManager.degTargetHotend(1));
sprintf_P(buf, PSTR("-> %d"), (int)thermalManager.degTargetHotend(1));
lv_label_set_text(labelExt2Target, buf);
lv_obj_align(labelExt2Target, buttonExt2, LV_ALIGN_CENTER, 0, TARGET_LABEL_MOD_Y);
#endif
#if HAS_HEATED_BED
sprintf_P(buf, PSTR("%d"), thermalManager.degBed());
sprintf_P(buf, PSTR("%d"), (int)thermalManager.degBed());
lv_label_set_text(labelBed, buf);
lv_obj_align(labelBed, buttonBedstate, LV_ALIGN_CENTER, 0, LABEL_MOD_Y);
sprintf_P(buf, PSTR("-> %d"), thermalManager.degTargetBed());
sprintf_P(buf, PSTR("-> %d"), (int)thermalManager.degTargetBed());
lv_label_set_text(labelBedTarget, buf);
lv_obj_align(labelBedTarget, buttonBedstate, LV_ALIGN_CENTER, 0, TARGET_LABEL_MOD_Y);
#endif
@ -249,15 +249,15 @@ void lv_draw_ready_print() {
void lv_temp_refr() {
#if HAS_HEATED_BED
sprintf(public_buf_l, printing_menu.bed_temp, thermalManager.degBed(), thermalManager.degTargetBed());
sprintf(public_buf_l, printing_menu.bed_temp, (int)thermalManager.degBed(), (int)thermalManager.degTargetBed());
lv_label_set_text(labelBed, public_buf_l);
#endif
sprintf(public_buf_l, printing_menu.temp1, thermalManager.degHotend(0), thermalManager.degTargetHotend(0));
sprintf(public_buf_l, printing_menu.temp1, (int)thermalManager.degHotend(0), (int)thermalManager.degTargetHotend(0));
lv_label_set_text(labelExt1, public_buf_l);
#if HAS_MULTI_EXTRUDER
sprintf(public_buf_l, printing_menu.temp1, thermalManager.degHotend(1), thermalManager.degTargetHotend(1));
sprintf(public_buf_l, printing_menu.temp1, (int)thermalManager.degHotend(1), (int)thermalManager.degTargetHotend(1));
lv_label_set_text(labelExt2, public_buf_l);
#endif
}

12
Marlin/src/lcd/extui/lib/mks_ui/wifi_module.cpp

@ -885,9 +885,7 @@ static void wifi_gcode_exec(uint8_t *cmd_line) {
char *outBuf = (char *)tempBuf;
char str_1[16], tbuf[34];
dtostrf(thermalManager.degHotend(0), 1, 1, tbuf);
strcat_P(tbuf, PSTR(" /"));
strcat(tbuf, dtostrf(thermalManager.degTargetHotend(0), 1, 1, str_1));
sprintf_P(tbuf, PSTR("%d /%d"), (int)thermalManager.degHotend(0), (int)thermalManager.degTargetHotend(0));
const int tlen = strlen(tbuf);
@ -897,9 +895,7 @@ static void wifi_gcode_exec(uint8_t *cmd_line) {
strcpy_P(outBuf, PSTR(" B:"));
outBuf += 3;
#if HAS_HEATED_BED
strcpy(outBuf, dtostrf(thermalManager.degBed(), 1, 1, str_1));
strcat_P(outBuf, PSTR(" /"));
strcat(outBuf, dtostrf(thermalManager.degTargetBed(), 1, 1, str_1));
sprintf_P(outBuf, PSTR("%d /%d"), (int)thermalManager.degBed(), (int)thermalManager.degTargetBed());
#else
strcpy_P(outBuf, PSTR("0 /0"));
#endif
@ -912,9 +908,7 @@ static void wifi_gcode_exec(uint8_t *cmd_line) {
strcat_P(outBuf, PSTR(" T1:"));
outBuf += 4;
#if HAS_MULTI_HOTEND
strcat(outBuf, dtostrf(thermalManager.degHotend(1), 1, 1, str_1));
strcat_P(outBuf, PSTR(" /"));
strcat(outBuf, dtostrf(thermalManager.degTargetHotend(1), 1, 1, str_1));
sprintf_P(outBuf, PSTR("%d /%d"), (int)thermalManager.degHotend(1), (int)thermalManager.degTargetHotend(1));
#else
strcat_P(outBuf, PSTR("0 /0"));
#endif

Loading…
Cancel
Save