Browse Source

U20: update config, ts, serial, jerk, limited edit values... (#15524)

pull/1/head
Tanguy Pruvot 5 years ago
committed by Scott Lahteine
parent
commit
93097af0ed
  1. 42
      config/examples/Alfawise/U20-bltouch/Configuration.h
  2. 42
      config/examples/Alfawise/U20/Configuration.h

42
config/examples/Alfawise/U20-bltouch/Configuration.h

@ -82,7 +82,7 @@
// Valid platformio.ini submodel values are U20_PLUS U20 U30 LK1 LK2 LK4
// Valid platformio.ini touchscreens are TS_V11 TS_V12
// Valid platformio.ini touchscreens are TS_V11 TS_V12 TS_V19
// 2 - Select the screen controller type. Most common is ILI9341 - First option. If your screen remains white,
// Try the alternate setting - this should enable ST7789V or ILI9328. For other LCDs... code is needed
@ -137,8 +137,7 @@
*
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
*/
#define SERIAL_PORT_2 2
#define NUM_SERIAL 2
//#define SERIAL_PORT_2 2
/**
* This setting determines the communication speed of the printer.
@ -361,7 +360,7 @@
* Specify whether the power supply is active HIGH or active LOW.
*/
//#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#define PSU_NAME "360W 24V/15A"
#if ENABLED(PSU_CONTROL)
#define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
@ -789,6 +788,11 @@
*/
#define DEFAULT_MAX_FEEDRATE { 200, 200, 100, 25 }
#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
#if ENABLED(LIMITED_MAX_FR_EDITING)
#define MAX_FEEDRATE_EDIT_VALUES { 250, 250, 200, 50 } // ...or, set your own edit limits
#endif
/**
* Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves)
@ -797,6 +801,11 @@
*/
#define DEFAULT_MAX_ACCELERATION { 200, 200, 100, 3000 }
#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
#if ENABLED(LIMITED_MAX_ACCEL_EDITING)
#define MAX_ACCEL_EDIT_VALUES { 600, 600, 400, 6000 } // ...or, set your own edit limits
#endif
/**
* Default Acceleration (change/s) change = mm/s
* Override with M204
@ -817,11 +826,16 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
//#define CLASSIC_JERK
#define CLASSIC_JERK
#if ENABLED(CLASSIC_JERK)
#define DEFAULT_XJERK 10.0
#define DEFAULT_YJERK 10.0
#define DEFAULT_ZJERK 0.4
#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2
#if ENABLED(LIMITED_JERK_EDITING)
#define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits
#endif
#endif
#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
@ -834,7 +848,7 @@
* http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
*/
#if DISABLED(CLASSIC_JERK)
#define JUNCTION_DEVIATION_MM 0.20 // (mm) Distance from real junction edge
#define JUNCTION_DEVIATION_MM 0.10 // (mm) Distance from real junction edge
#endif
/**
@ -2128,19 +2142,27 @@
#if ENABLED(TS_V11)
// Alfawise U20 ILI9341 2.8 TP Ver 1.1 / Green PCB on the back of touchscreen
#define XPT2046_X_CALIBRATION 11605
#define XPT2046_Y_CALIBRATION 9091
#define XPT2046_X_CALIBRATION 12000
#define XPT2046_Y_CALIBRATION 9000
#define XPT2046_X_OFFSET -24
#define XPT2046_Y_OFFSET -17
#endif
#if ENABLED(TS_V12)
// Alfawise U30 ILI9341 2.8 TP Ver 1.2 / Blue PCB on the back of touchscreen
#define XPT2046_X_CALIBRATION 12316
#define XPT2046_Y_CALIBRATION -8981
#define XPT2046_X_CALIBRATION 12000
#define XPT2046_Y_CALIBRATION -9000
#define XPT2046_X_OFFSET -43
#define XPT2046_Y_OFFSET 257
#endif
#if ENABLED(TS_V19)
// Longer LK4/U30 2.8" Ver 2019 / Blue PCB, SID240x320-8PCB-D
#define XPT2046_X_CALIBRATION -12000
#define XPT2046_Y_CALIBRATION 9000
#define XPT2046_X_OFFSET 320
#define XPT2046_Y_OFFSET 0
#endif
#endif
//

42
config/examples/Alfawise/U20/Configuration.h

@ -82,7 +82,7 @@
// Valid platformio.ini submodel values are U20_PLUS U20 U30 LK1 LK2 LK4
// Valid platformio.ini touchscreens are TS_V11 TS_V12
// Valid platformio.ini touchscreens are TS_V11 TS_V12 TS_V19
// 2 - Select the screen controller type. Most common is ILI9341 - First option. If your screen remains white,
// Try the alternate setting - this should enable ST7789V or ILI9328. For other LCDs... code is needed
@ -137,8 +137,7 @@
*
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
*/
#define SERIAL_PORT_2 2
#define NUM_SERIAL 2
//#define SERIAL_PORT_2 2
/**
* This setting determines the communication speed of the printer.
@ -361,7 +360,7 @@
* Specify whether the power supply is active HIGH or active LOW.
*/
//#define PSU_CONTROL
//#define PSU_NAME "Power Supply"
#define PSU_NAME "360W 24V/15A"
#if ENABLED(PSU_CONTROL)
#define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
@ -789,6 +788,11 @@
*/
#define DEFAULT_MAX_FEEDRATE { 200, 200, 100, 25 }
#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
#if ENABLED(LIMITED_MAX_FR_EDITING)
#define MAX_FEEDRATE_EDIT_VALUES { 250, 250, 200, 50 } // ...or, set your own edit limits
#endif
/**
* Default Max Acceleration (change/s) change = mm/s
* (Maximum start speed for accelerated moves)
@ -797,6 +801,11 @@
*/
#define DEFAULT_MAX_ACCELERATION { 200, 200, 100, 3000 }
#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
#if ENABLED(LIMITED_MAX_ACCEL_EDITING)
#define MAX_ACCEL_EDIT_VALUES { 600, 600, 400, 6000 } // ...or, set your own edit limits
#endif
/**
* Default Acceleration (change/s) change = mm/s
* Override with M204
@ -817,11 +826,16 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
//#define CLASSIC_JERK
#define CLASSIC_JERK
#if ENABLED(CLASSIC_JERK)
#define DEFAULT_XJERK 10.0
#define DEFAULT_YJERK 10.0
#define DEFAULT_ZJERK 0.4
#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2
#if ENABLED(LIMITED_JERK_EDITING)
#define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits
#endif
#endif
#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
@ -834,7 +848,7 @@
* http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
*/
#if DISABLED(CLASSIC_JERK)
#define JUNCTION_DEVIATION_MM 0.20 // (mm) Distance from real junction edge
#define JUNCTION_DEVIATION_MM 0.10 // (mm) Distance from real junction edge
#endif
/**
@ -2127,19 +2141,27 @@
#if ENABLED(TS_V11)
// Alfawise U20 ILI9341 2.8 TP Ver 1.1 / Green PCB on the back of touchscreen
#define XPT2046_X_CALIBRATION 11605
#define XPT2046_Y_CALIBRATION 9091
#define XPT2046_X_CALIBRATION 12000
#define XPT2046_Y_CALIBRATION 9000
#define XPT2046_X_OFFSET -24
#define XPT2046_Y_OFFSET -17
#endif
#if ENABLED(TS_V12)
// Alfawise U30 ILI9341 2.8 TP Ver 1.2 / Blue PCB on the back of touchscreen
#define XPT2046_X_CALIBRATION 12316
#define XPT2046_Y_CALIBRATION -8981
#define XPT2046_X_CALIBRATION 12000
#define XPT2046_Y_CALIBRATION -9000
#define XPT2046_X_OFFSET -43
#define XPT2046_Y_OFFSET 257
#endif
#if ENABLED(TS_V19)
// Longer LK4/U30 2.8" Ver 2019 / Blue PCB, SID240x320-8PCB-D
#define XPT2046_X_CALIBRATION -12000
#define XPT2046_Y_CALIBRATION 9000
#define XPT2046_X_OFFSET 320
#define XPT2046_Y_OFFSET 0
#endif
#endif
//

Loading…
Cancel
Save