Browse Source

Merge pull request #11692 from thinkyhead/bf2_teensy_and_servos

[2.0.x] Don't test servos for Teensy 3.5/3.6
pull/1/head
Scott Lahteine 6 years ago
committed by GitHub
parent
commit
92069f1422
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
  1. 10
      .circleci/config.yml
  2. 35
      Marlin/src/inc/SanityCheck.h
  3. 2
      Marlin/src/pins/pins_TEENSY35_36.h
  4. 4
      buildroot/bin/env_backup
  5. 27
      buildroot/bin/env_restore
  6. 24
      buildroot/bin/restore_configs
  7. 3
      buildroot/bin/update_defaults
  8. 7
      buildroot/share/tests/DUE_tests
  9. 8
      buildroot/share/tests/LPC1768_tests
  10. 8
      buildroot/share/tests/STM32F1_tests
  11. 11
      buildroot/share/tests/megaatmega2560_tests
  12. 14
      buildroot/share/tests/start_tests
  13. 37
      buildroot/share/tests/teensy35_tests

10
.circleci/config.yml

@ -53,11 +53,11 @@ jobs:
# Generate custom version include
generate_version_header_for_marlin ./Marlin/src/inc
cat ./Marlin/src/inc/_Version.h
#
# Backup pins_RAMPS.h
#
cp Marlin/src/pins/pins_RAMPS.h Marlin/src/pins/pins_RAMPS.h.backup
# Back up the environment
#
env_backup
#################################
# Build all sample configurations
@ -279,6 +279,10 @@ jobs:
# Remove temp files from dependencies tree prior to caching
rm -rf ~/Marlin/.piolibdeps/_tmp_*
#
# Restore the environment
#
env_restore
- save_cache:

35
Marlin/src/inc/SanityCheck.h

@ -607,14 +607,47 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
#error "SWITCHING_NOZZLE requires exactly 2 EXTRUDERS."
#elif NUM_SERVOS < 1
#error "SWITCHING_NOZZLE requires NUM_SERVOS >= 1."
#elif SWITCHING_NOZZLE_SERVO_NR == 0 && !PIN_EXISTS(SERVO0)
#error "SERVO0_PIN must be defined for your SWITCHING_NOZZLE."
#elif SWITCHING_NOZZLE_SERVO_NR == 1 && !PIN_EXISTS(SERVO1)
#error "SERVO1_PIN must be defined for your SWITCHING_NOZZLE."
#elif SWITCHING_NOZZLE_SERVO_NR == 2 && !PIN_EXISTS(SERVO2)
#error "SERVO2_PIN must be defined for your SWITCHING_NOZZLE."
#elif SWITCHING_NOZZLE_SERVO_NR == 3 && !PIN_EXISTS(SERVO3)
#error "SERVO3_PIN must be defined for your SWITCHING_NOZZLE."
#endif
#endif
/**
* Single Stepper Dual Extruder with switching servo
*/
#if ENABLED(SWITCHING_EXTRUDER) && NUM_SERVOS < 1
#if ENABLED(SWITCHING_EXTRUDER)
#if NUM_SERVOS < 1
#error "SWITCHING_EXTRUDER requires NUM_SERVOS >= 1."
#elif SWITCHING_EXTRUDER_SERVO_NR == 0 && !PIN_EXISTS(SERVO0)
#error "SERVO0_PIN must be defined for your SWITCHING_EXTRUDER."
#elif SWITCHING_EXTRUDER_SERVO_NR == 1 && !PIN_EXISTS(SERVO1)
#error "SERVO1_PIN must be defined for your SWITCHING_EXTRUDER."
#elif SWITCHING_EXTRUDER_SERVO_NR == 2 && !PIN_EXISTS(SERVO2)
#error "SERVO2_PIN must be defined for your SWITCHING_EXTRUDER."
#elif SWITCHING_EXTRUDER_SERVO_NR == 3 && !PIN_EXISTS(SERVO3)
#error "SERVO3_PIN must be defined for your SWITCHING_EXTRUDER."
#endif
#if EXTRUDERS > 3
#if NUM_SERVOS < 2
#error "SWITCHING_EXTRUDER with 4 extruders requires NUM_SERVOS >= 2."
#elif SWITCHING_EXTRUDER_E23_SERVO_NR == 0 && !PIN_EXISTS(SERVO0)
#error "SERVO0_PIN must be defined for your SWITCHING_EXTRUDER."
#elif SWITCHING_EXTRUDER_E23_SERVO_NR == 1 && !PIN_EXISTS(SERVO1)
#error "SERVO1_PIN must be defined for your SWITCHING_EXTRUDER."
#elif SWITCHING_EXTRUDER_E23_SERVO_NR == 2 && !PIN_EXISTS(SERVO2)
#error "SERVO2_PIN must be defined for your SWITCHING_EXTRUDER."
#elif SWITCHING_EXTRUDER_E23_SERVO_NR == 3 && !PIN_EXISTS(SERVO3)
#error "SERVO3_PIN must be defined for your SWITCHING_EXTRUDER."
#elif SWITCHING_EXTRUDER_E23_SERVO_NR == SWITCHING_EXTRUDER_SERVO_NR
#error "SWITCHING_EXTRUDER_E23_SERVO_NR should be a different extruder from SWITCHING_EXTRUDER_SERVO_NR."
#endif
#endif
#endif
/**

2
Marlin/src/pins/pins_TEENSY35_36.h

@ -139,7 +139,7 @@ D8 HEATER_BED_PIN CS1 RX4 A12 31 | 46 * * 47 | 34 A15 PWM
#endif
#endif
#ifdef ULTRA_LCD
#if ENABLED(ULTRA_LCD)
#define LCD_PINS_RS 40
#define LCD_PINS_ENABLE 41
#define LCD_PINS_D4 42

4
buildroot/bin/env_backup

@ -2,13 +2,13 @@
[ -z "$1" ] || cd $1
if [ -d ".test" ]; then
if [ -d .test ]; then
printf "\033[0;31mEnvironment backup already exists!\033[0m\n"
else
mkdir .test
cp -r Marlin/src/pins .test/pins
cp Marlin/Configuration*.h .test/
[ -f Marlin/_Bootscreen.h ] && cp Marlin/_Bootscreen.h .test/
[ -f Marlin/_Statusscreen.h ] && cp Marlin/_Statusscreen.h .test/
cp -r Marlin/src/pins .test/pins
printf "\033[0;32mEnvironment Backup created\033[0m\n"
fi

27
buildroot/bin/env_restore

@ -2,25 +2,10 @@
[ -z "$1" ] || cd $1
if [ -d ".test" ]; then
cp .test/Configuration*.h Marlin/
rm .test/Configuration*.h
cp Marlin/src/config/default/* Marlin/
[ -f Marlin/_Bootscreen.h ] && rm Marlin/_Bootscreen.h
[ -f Marlin/_Statusscreen.h ] && rm Marlin/_Statusscreen.h
[ -d .test/pins ] && { cp .test/pins/* Marlin/src/pins/ ; rm -rf .test/pins ; }
[ -d .test ] && rm -r .test
if [ -f .test/_Bootscreen.h ]; then
cp .test/_Bootscreen.h Marlin/
rm .test/_Bootscreen.h
fi
if [ -f .test/_Statusscreen.h ]; then
cp .test/_Statusscreen.h Marlin/
rm .test/_Statusscreen.h
fi
cp -r .test/pins Marlin/src
rm -r .test/pins
rmdir .test
printf "\033[0;32mEnvironment Restored\033[0m\n"
else
printf "\033[0;31mEnvironment Backup not available!\033[0m\n"
fi
printf "\033[0;32mEnvironment Restored\033[0m\n"

24
buildroot/bin/restore_configs

@ -1,17 +1,15 @@
#!/usr/bin/env bash
#
# restore_configs
#
# Restore default configs, delete pins backup and dogm bitmaps
#
cp Marlin/src/config/default/Configuration.h Marlin/Configuration.h
cp Marlin/src/config/default/Configuration_adv.h Marlin/Configuration_adv.h
# Restore the (possibly modified) Configurations
[ -d ".test" -a -f ".test/Configuration.h" ] && cp .test/Configuration*.h Marlin/
if [ -f Marlin/src/pins/pins_RAMPS.h.backup ]; then
cp Marlin/src/pins/pins_RAMPS.h.backup Marlin/src/pins/pins_RAMPS.h
rm Marlin/src/pins/pins_RAMPS.h.backup
fi
# Restore the original unmodified pins
[ -d ".test/pins" ] && cp -r .test/pins Marlin/src/pins/
if [ -f Marlin/_Bootscreen.h ]; then
rm Marlin/_Bootscreen.h
fi
if [ -f Marlin/_Statusscreen.h ]; then
rm Marlin/_Statusscreen.h
fi
# Delete DOGM bitmaps
rm -f Marlin/_*screen.h

3
buildroot/bin/update_defaults

@ -1,4 +1,3 @@
#!/usr/bin/env bash
cp Marlin/Configuration.h Marlin/src/config/default/Configuration.h
cp Marlin/Configuration_adv.h Marlin/src/config/default/Configuration_adv.h
cp Marlin/Configuration*.h .test/

7
buildroot/share/tests/DUE_tests

@ -3,9 +3,14 @@
# exit on first failure
set -e
restore_configs
env_backup
opt_set MOTHERBOARD BOARD_RAMPS4DUE_EFB
update_defaults
opt_enable S_CURVE_ACCELERATION EEPROM_SETTINGS
opt_set E0_AUTO_FAN_PIN 8
opt_set EXTRUDER_AUTO_FAN_SPEED 100
exec_test $1 $2 "RAMPS4DUE_EFB S_CURVE_ACCELERATION EEPROM_SETTINGS"
env_restore

8
buildroot/share/tests/LPC1768_tests

@ -3,8 +3,11 @@
# exit on first failure
set -e
restore_configs
env_backup
opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB
update_defaults
exec_test $1 $2 "Build Re-ARM Default Configuration"
restore_configs
@ -60,5 +63,4 @@ opt_enable FAN_SOFT_PWM SDSUPPORT
opt_enable USE_XMAX_PLUG
exec_test $1 $2 "MKS SBASE Many less common options"
#clean up
restore_configs
env_restore

8
buildroot/share/tests/STM32F1_tests

@ -3,10 +3,12 @@
# exit on first failure
set -e
restore_configs
env_backup
opt_set MOTHERBOARD BOARD_STM32F1R
update_defaults
opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT
exec_test $1 $2 "STM32F1R EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT"
#cleanup
restore_configs
env_restore

11
buildroot/share/tests/megaatmega2560_tests

@ -3,15 +3,13 @@
# exit on first failure
set -e
#
# Backup pins_RAMPS.h
#
cp Marlin/src/pins/pins_RAMPS.h Marlin/src/pins/pins_RAMPS.h.backup
env_backup
#
# Build with the default configurations
#
restore_configs
exec_test $1 $2 "Default Configuration"
#
# Test 2 extruders (one MAX6675) and heated bed on basic RAMPS 1.4
# Test a "Fix Mounted" Probe with Safe Homing, some arc options,
@ -311,5 +309,4 @@ exec_test $1 $2 "TMC2208 Config"
#
#
#clean up
restore_configs
env_restore

14
buildroot/share/tests/start_tests

@ -1,11 +1,17 @@
#!/usr/bin/env bash
#
# start_tests
#
# Run one or more tests
#
export PATH="$PATH:$( cd "$(dirname "${BASH_SOURCE[0]}")" ; pwd -P )"
export PATH="$PATH:./buildroot/bin"
# exit on first failure
set -e
exec_test () {
exec_test() {
printf "\033[0;32m[Test $2] \033[0m$3... "
if build_marlin_pio $1 "-e $2"; then
printf "\033[0;32mPassed\033[0m\n"
@ -18,9 +24,6 @@ exec_test () {
}
export -f exec_test
env_backup
printf "Running \033[0;32m$2\033[0m Tests\n"
if [[ $3 = "--deep-clean" ]]; then
echo "Deleting all PlatformIO caches, downloads and installed packages..."
env_clean --deep
@ -36,8 +39,9 @@ if [[ $2 = "ALL" ]]; then
$f $1 $testenv
done
else
printf "Running \033[0;32m$2\033[0m Tests\n"
exec_test $1 "$2 --target clean" "Setup Build Environment"
$2_tests $1 $2
fi
printf "\033[0;32mAll tests completed successfully\033[0m\n"
env_restore

37
buildroot/share/tests/teensy35_tests

@ -3,9 +3,11 @@
# exit on first failure
set -e
restore_configs
env_backup
opt_set MOTHERBOARD BOARD_TEENSY35_36
cp Marlin/src/pins/pins_RAMPS.h Marlin/src/pins/pins_RAMPS.h.backup
update_defaults
#
# Test Teensy3.5 with default config
#
@ -37,17 +39,17 @@ exec_test $1 $2 "Sled Z Probe with Linear leveling"
#
# Test a Servo Probe
#
restore_configs
opt_enable NUM_SERVOS Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE
opt_set NUM_SERVOS 1
opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
exec_test $1 $2 "Servo Probe"
# restore_configs
# opt_enable NUM_SERVOS Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE
# opt_set NUM_SERVOS 1
# opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
# exec_test $1 $2 "Servo Probe"
#
# ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES
#
opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
opt_enable_adv EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES
exec_test $1 $2 "...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES"
# opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
# opt_enable_adv EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES
# exec_test $1 $2 "...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES"
#
# Test MESH_BED_LEVELING feature, with LCD
#
@ -64,12 +66,12 @@ exec_test $1 $2 "Mixing Extruder"
#
# Test SWITCHING_EXTRUDER
#
restore_configs
opt_set EXTRUDERS 2
opt_enable NUM_SERVOS
opt_set NUM_SERVOS 1
opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
exec_test $1 $2 "SWITCHING_EXTRUDER"
# restore_configs
# opt_set EXTRUDERS 2
# opt_enable NUM_SERVOS
# opt_set NUM_SERVOS 1
# opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
# exec_test $1 $2 "SWITCHING_EXTRUDER"
#
# Enable COREXY
#
@ -92,5 +94,4 @@ opt_add_adv Z2_MAX_PIN 2
opt_enable USE_XMAX_PLUG
exec_test $1 $2 "Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS"
#cleanup
restore_configs
env_restore

Loading…
Cancel
Save