Browse Source

Reformat ADC cases

pull/1/head
Scott Lahteine 5 years ago
parent
commit
91c3b8e3ca
  1. 72
      Marlin/src/module/temperature.cpp

72
Marlin/src/module/temperature.cpp

@ -2670,81 +2670,47 @@ void Temperature::isr() {
break;
#if HAS_TEMP_ADC_0
case PrepareTemp_0:
HAL_START_ADC(TEMP_0_PIN);
break;
case MeasureTemp_0:
ACCUMULATE_ADC(temp_hotend[0]);
break;
case PrepareTemp_0: HAL_START_ADC(TEMP_0_PIN); break;
case MeasureTemp_0: ACCUMULATE_ADC(temp_hotend[0]); break;
#endif
#if HAS_HEATED_BED
case PrepareTemp_BED:
HAL_START_ADC(TEMP_BED_PIN);
break;
case MeasureTemp_BED:
ACCUMULATE_ADC(temp_bed);
break;
case PrepareTemp_BED: HAL_START_ADC(TEMP_BED_PIN); break;
case MeasureTemp_BED: ACCUMULATE_ADC(temp_bed); break;
#endif
#if HAS_TEMP_CHAMBER
case PrepareTemp_CHAMBER:
HAL_START_ADC(TEMP_CHAMBER_PIN);
break;
case MeasureTemp_CHAMBER:
ACCUMULATE_ADC(temp_chamber);
break;
case PrepareTemp_CHAMBER: HAL_START_ADC(TEMP_CHAMBER_PIN); break;
case MeasureTemp_CHAMBER: ACCUMULATE_ADC(temp_chamber); break;
#endif
#if HAS_TEMP_ADC_1
case PrepareTemp_1:
HAL_START_ADC(TEMP_1_PIN);
break;
case MeasureTemp_1:
ACCUMULATE_ADC(temp_hotend[1]);
break;
case PrepareTemp_1: HAL_START_ADC(TEMP_1_PIN); break;
case MeasureTemp_1: ACCUMULATE_ADC(temp_hotend[1]); break;
#endif
#if HAS_TEMP_ADC_2
case PrepareTemp_2:
HAL_START_ADC(TEMP_2_PIN);
break;
case MeasureTemp_2:
ACCUMULATE_ADC(temp_hotend[2]);
break;
case PrepareTemp_2: HAL_START_ADC(TEMP_2_PIN); break;
case MeasureTemp_2: ACCUMULATE_ADC(temp_hotend[2]); break;
#endif
#if HAS_TEMP_ADC_3
case PrepareTemp_3:
HAL_START_ADC(TEMP_3_PIN);
break;
case MeasureTemp_3:
ACCUMULATE_ADC(temp_hotend[3]);
break;
case PrepareTemp_3: HAL_START_ADC(TEMP_3_PIN); break;
case MeasureTemp_3: ACCUMULATE_ADC(temp_hotend[3]); break;
#endif
#if HAS_TEMP_ADC_4
case PrepareTemp_4:
HAL_START_ADC(TEMP_4_PIN);
break;
case MeasureTemp_4:
ACCUMULATE_ADC(temp_hotend[4]);
break;
case PrepareTemp_4: HAL_START_ADC(TEMP_4_PIN); break;
case MeasureTemp_4: ACCUMULATE_ADC(temp_hotend[4]); break;
#endif
#if HAS_TEMP_ADC_5
case PrepareTemp_5:
HAL_START_ADC(TEMP_5_PIN);
break;
case MeasureTemp_5:
ACCUMULATE_ADC(temp_hotend[5]);
break;
case PrepareTemp_5: HAL_START_ADC(TEMP_5_PIN); break;
case MeasureTemp_5: ACCUMULATE_ADC(temp_hotend[5]); break;
#endif
#if ENABLED(FILAMENT_WIDTH_SENSOR)
case Prepare_FILWIDTH:
HAL_START_ADC(FILWIDTH_PIN);
break;
case Prepare_FILWIDTH: HAL_START_ADC(FILWIDTH_PIN); break;
case Measure_FILWIDTH:
if (!HAL_ADC_READY())
next_sensor_state = adc_sensor_state; // redo this state
@ -2756,9 +2722,7 @@ void Temperature::isr() {
#endif
#if HAS_ADC_BUTTONS
case Prepare_ADC_KEY:
HAL_START_ADC(ADC_KEYPAD_PIN);
break;
case Prepare_ADC_KEY: HAL_START_ADC(ADC_KEYPAD_PIN); break;
case Measure_ADC_KEY:
if (!HAL_ADC_READY())
next_sensor_state = adc_sensor_state; // redo this state

Loading…
Cancel
Save