Browse Source

Encapsulate RGB(W) LEDs

pull/1/head
Scott Lahteine 7 years ago
parent
commit
8fbb833de9
  1. 2
      Marlin/src/Makefile
  2. 104
      Marlin/src/Marlin.cpp
  3. 237
      Marlin/src/feature/Max7219_Debug_LEDs.cpp
  4. 0
      Marlin/src/feature/Max7219_Debug_LEDs.h
  5. 237
      Marlin/src/feature/leds/Max7219_Debug_LEDs.cpp
  6. 10
      Marlin/src/feature/leds/blinkm.cpp
  7. 9
      Marlin/src/feature/leds/blinkm.h
  8. 73
      Marlin/src/feature/leds/leds.cpp
  9. 53
      Marlin/src/feature/leds/leds.h
  10. 72
      Marlin/src/feature/leds/neopixel.cpp
  11. 38
      Marlin/src/feature/leds/neopixel.h
  12. 3
      Marlin/src/feature/leds/pca9632.cpp
  13. 4
      Marlin/src/feature/leds/pca9632.h
  14. 4
      Marlin/src/gcode/queue.cpp
  15. 4
      Marlin/src/gcode/temperature/M109.cpp

2
Marlin/src/Makefile

@ -310,7 +310,7 @@ CXXSRC = WMath.cpp WString.cpp Print.cpp Marlin.cpp \
module/temperature.cpp sd/cardreader.cpp module/configuration_store.cpp \
HAL/watchdog.cpp SPI.cpp HAL/servo.cpp Tone.cpp lcd/ultralcd.cpp libs/digipot_mcp4451.cpp \
feature/dac/dac_mcp4728.cpp libs/vector_3.cpp libs/least_squares_fit.cpp module/endstops.cpp libs/stopwatch.cpp core/utility.cpp \
module/printcounter.cpp libs/nozzle.cpp core/serial.cpp gcode/parser.cpp libs/Max7219_Debug_LEDs.cpp
module/printcounter.cpp libs/nozzle.cpp core/serial.cpp gcode/parser.cpp feature/Max7219_Debug_LEDs.cpp
ifeq ($(NEOPIXEL), 1)
CXXSRC += Adafruit_NeoPixel.cpp
endif

104
Marlin/src/Marlin.cpp

@ -71,19 +71,11 @@
#endif
#if ENABLED(MAX7219_DEBUG)
#include "feature/leds/Max7219_Debug_LEDs.h"
#include "feature/Max7219_Debug_LEDs.h"
#endif
#if ENABLED(NEOPIXEL_RGBW_LED)
#include <Adafruit_NeoPixel.h>
#endif
#if ENABLED(BLINKM)
#include "feature/leds/blinkm.h"
#endif
#if ENABLED(PCA9632)
#include "feature/leds/pca9632.h"
#if HAS_COLOR_LEDS
#include "feature/leds/leds.h"
#endif
#if HAS_SERVOS
@ -492,96 +484,6 @@ void servo_init() {
#endif
#if HAS_COLOR_LEDS
#if ENABLED(NEOPIXEL_RGBW_LED)
Adafruit_NeoPixel pixels(NEOPIXEL_PIXELS, NEOPIXEL_PIN, NEO_GRBW + NEO_KHZ800);
void set_neopixel_color(const uint32_t color) {
for (uint16_t i = 0; i < pixels.numPixels(); ++i)
pixels.setPixelColor(i, color);
pixels.show();
}
void setup_neopixel() {
pixels.setBrightness(255); // 0 - 255 range
pixels.begin();
pixels.show(); // initialize to all off
#if ENABLED(NEOPIXEL_STARTUP_TEST)
delay(2000);
set_neopixel_color(pixels.Color(255, 0, 0, 0)); // red
delay(2000);
set_neopixel_color(pixels.Color(0, 255, 0, 0)); // green
delay(2000);
set_neopixel_color(pixels.Color(0, 0, 255, 0)); // blue
delay(2000);
#endif
set_neopixel_color(pixels.Color(0, 0, 0, 255)); // white
}
#endif // NEOPIXEL_RGBW_LED
void set_led_color(
const uint8_t r, const uint8_t g, const uint8_t b
#if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_RGBW_LED)
, const uint8_t w = 0
#if ENABLED(NEOPIXEL_RGBW_LED)
, bool isSequence = false
#endif
#endif
) {
#if ENABLED(NEOPIXEL_RGBW_LED)
const uint32_t color = pixels.Color(r, g, b, w);
static uint16_t nextLed = 0;
if (!isSequence)
set_neopixel_color(color);
else {
pixels.setPixelColor(nextLed, color);
pixels.show();
if (++nextLed >= pixels.numPixels()) nextLed = 0;
return;
}
#endif
#if ENABLED(BLINKM)
// This variant uses i2c to send the RGB components to the device.
SendColors(r, g, b);
#endif
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
// This variant uses 3 separate pins for the RGB components.
// If the pins can do PWM then their intensity will be set.
WRITE(RGB_LED_R_PIN, r ? HIGH : LOW);
WRITE(RGB_LED_G_PIN, g ? HIGH : LOW);
WRITE(RGB_LED_B_PIN, b ? HIGH : LOW);
analogWrite(RGB_LED_R_PIN, r);
analogWrite(RGB_LED_G_PIN, g);
analogWrite(RGB_LED_B_PIN, b);
#if ENABLED(RGBW_LED)
WRITE(RGB_LED_W_PIN, w ? HIGH : LOW);
analogWrite(RGB_LED_W_PIN, w);
#endif
#endif
#if ENABLED(PCA9632)
// Update I2C LED driver
PCA9632_SetColor(r, g, b);
#endif
}
#endif // HAS_COLOR_LEDS
#if HAS_WORKSPACE_OFFSET || ENABLED(DUAL_X_CARRIAGE)
/**

237
Marlin/src/feature/Max7219_Debug_LEDs.cpp

@ -0,0 +1,237 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* This module is off by default, but can be enabled to facilitate the display of
* extra debug information during code development. It assumes the existence of a
* Max7219 LED Matrix. A suitable device can be obtained on eBay similar to this:
* http://www.ebay.com/itm/191781645249 for under $2.00 including shipping.
*
* Just connect up +5v and GND to give it power, then connect up the pins assigned
* in Configuration_adv.h. For example, on the Re-ARM you could use:
*
* #define MAX7219_CLK_PIN 77
* #define MAX7219_DIN_PIN 78
* #define MAX7219_LOAD_PIN 79
*
* Max7219_init() is called automatically at startup, and then there are a number of
* support functions available to control the LEDs in the 8x8 grid.
*
* void Max7219_init();
* void Max7219_PutByte(uint8_t data);
* void Max7219(uint8_t reg, uint8_t data);
* void Max7219_LED_On(uint8_t row, uint8_t col);
* void Max7219_LED_Off(uint8_t row, uint8_t col);
* void Max7219_LED_Toggle(uint8_t row, uint8_t col);
* void Max7219_Clear_Row(uint8_t row);
* void Max7219_Clear_Column(uint8_t col);
* void Max7219_Set_Row(uint8_t row, uint8_t val);
* void Max7219_Set_Column(uint8_t col, uint8_t val);
* void Max7219_idle_tasks();
*/
#include "../inc/MarlinConfig.h"
#if ENABLED(MAX7219_DEBUG)
#include "Max7219_Debug_LEDs.h"
#include "../module/planner.h"
#include "../module/stepper.h"
#include "../Marlin.h"
static uint8_t LEDs[8] = { 0 };
void Max7219_PutByte(uint8_t data) {
for (uint8_t i = 8; i--;) {
WRITE(MAX7219_CLK_PIN, LOW); // tick
WRITE(MAX7219_DIN_PIN, (data & 0x80) ? HIGH : LOW); // send 1 or 0 based on data bit
WRITE(MAX7219_CLK_PIN, HIGH); // tock
data <<= 1;
}
}
void Max7219(const uint8_t reg, const uint8_t data) {
WRITE(MAX7219_LOAD_PIN, LOW); // begin
Max7219_PutByte(reg); // specify register
Max7219_PutByte(data); // put data
WRITE(MAX7219_LOAD_PIN, LOW); // and tell the chip to load the data
WRITE(MAX7219_LOAD_PIN, HIGH);
}
void Max7219_LED_Set(const uint8_t row, const uint8_t col, const bool on) {
if (row > 7 || col > 7) return;
if (TEST(LEDs[row], col) == on) return; // if LED is already on/off, leave alone
if (on) SBI(LEDs[row], col); else CBI(LEDs[row], col);
Max7219(8 - row, LEDs[row]);
}
void Max7219_LED_On(const uint8_t row, const uint8_t col) {
Max7219_LED_Set(row, col, true);
}
void Max7219_LED_Off(const uint8_t row, const uint8_t col) {
Max7219_LED_Set(row, col, false);
}
void Max7219_LED_Toggle(const uint8_t row, const uint8_t col) {
if (row > 7 || col > 7) return;
if (TEST(LEDs[row], col))
Max7219_LED_Off(row, col);
else
Max7219_LED_On(row, col);
}
void Max7219_Clear_Column(const uint8_t col) {
if (col > 7) return;
LEDs[col] = 0;
Max7219(8 - col, LEDs[col]);
}
void Max7219_Clear_Row(const uint8_t row) {
if (row > 7) return;
for (uint8_t c = 0; c <= 7; c++)
Max7219_LED_Off(c, row);
}
void Max7219_Set_Row(const uint8_t row, const uint8_t val) {
if (row > 7) return;
for (uint8_t b = 0; b <= 7; b++)
if (TEST(val, b))
Max7219_LED_On(7 - b, row);
else
Max7219_LED_Off(7 - b, row);
}
void Max7219_Set_Column(const uint8_t col, const uint8_t val) {
if (col > 7) return;
LEDs[col] = val;
Max7219(8 - col, LEDs[col]);
}
void Max7219_init() {
uint8_t i, x, y;
SET_OUTPUT(MAX7219_DIN_PIN);
SET_OUTPUT(MAX7219_CLK_PIN);
OUT_WRITE(MAX7219_LOAD_PIN, HIGH);
//initiation of the max 7219
Max7219(max7219_reg_scanLimit, 0x07);
Max7219(max7219_reg_decodeMode, 0x00); // using an led matrix (not digits)
Max7219(max7219_reg_shutdown, 0x01); // not in shutdown mode
Max7219(max7219_reg_displayTest, 0x00); // no display test
Max7219(max7219_reg_intensity, 0x01 & 0x0F); // the first 0x0F is the value you can set
// range: 0x00 to 0x0F
for (i = 0; i <= 7; i++) { // empty registers, turn all LEDs off
LEDs[i] = 0x00;
Max7219(i + 1, 0);
}
for (x = 0; x <= 7; x++) // Do an aesthetically pleasing pattern to fully test
for (y = 0; y <= 7; y++) { // the Max7219 module and LEDs. First, turn them
Max7219_LED_On(x, y); // all on.
delay(3);
}
for (x = 0; x <= 7; x++) // Now, turn them all off.
for (y = 0; y <= 7; y++) {
Max7219_LED_Off(x, y);
delay(3); // delay() is OK here. Max7219_init() is only called from
} // setup() and nothing is running yet.
delay(150);
for (x = 8; x--;) // Now, do the same thing from the opposite direction
for (y = 0; y <= 7; y++) {
Max7219_LED_On(x, y);
delay(2);
}
for (x = 8; x--;)
for (y = 0; y <= 7; y++) {
Max7219_LED_Off(x, y);
delay(2);
}
}
/**
* These are sample debug features to demonstrate the usage of the 8x8 LED Matrix for debug purposes.
* There is very little CPU burden added to the system by displaying information within the idle()
* task.
*
* But with that said, if your debugging can be facilitated by making calls into the library from
* other places in the code, feel free to do it. The CPU burden for a few calls to toggle an LED
* or clear a row is not very significant.
*/
void Max7219_idle_tasks() {
#if ENABLED(MAX7219_DEBUG_PRINTER_ALIVE)
static int debug_cnt = 0;
if (debug_cnt++ > 100) {
Max7219_LED_Toggle(7, 7);
debug_cnt = 0;
}
#endif
#ifdef MAX7219_DEBUG_STEPPER_HEAD
Max7219_Clear_Row(MAX7219_DEBUG_STEPPER_HEAD);
Max7219_Clear_Row(MAX7219_DEBUG_STEPPER_HEAD + 1);
if ( planner.block_buffer_head < 8)
Max7219_LED_On( planner.block_buffer_head, MAX7219_DEBUG_STEPPER_HEAD);
else
Max7219_LED_On( planner.block_buffer_head-8, MAX7219_DEBUG_STEPPER_HEAD+1);
#endif
#ifdef MAX7219_DEBUG_STEPPER_TAIL
Max7219_Clear_Row(MAX7219_DEBUG_STEPPER_TAIL);
Max7219_Clear_Row(MAX7219_DEBUG_STEPPER_TAIL + 1);
if ( planner.block_buffer_tail < 8)
Max7219_LED_On( planner.block_buffer_tail, MAX7219_DEBUG_STEPPER_TAIL );
else
Max7219_LED_On( planner.block_buffer_tail-8, MAX7219_DEBUG_STEPPER_TAIL+1 );
#endif
#ifdef MAX7219_DEBUG_STEPPER_QUEUE
static int16_t last_depth = 0;
int16_t current_depth = planner.block_buffer_head - planner.block_buffer_tail;
if (current_depth != last_depth) { // usually, no update will be needed.
if (current_depth < 0) current_depth += BLOCK_BUFFER_SIZE;
NOMORE(current_depth, BLOCK_BUFFER_SIZE);
NOMORE(current_depth, 16); // if the BLOCK_BUFFER_SIZE is greater than 16, two lines
// of LEDs is enough to see if the buffer is draining
const uint8_t st = min(current_depth, last_depth),
en = max(current_depth, last_depth);
if (current_depth < last_depth)
for (uint8_t i = st; i <= en; i++) // clear the highest order LEDs
Max7219_LED_Off(i >> 1, MAX7219_DEBUG_STEPPER_QUEUE + (i & 1));
else
for (uint8_t i = st; i <= en; i++) // set the highest order LEDs
Max7219_LED_On(i >> 1, MAX7219_DEBUG_STEPPER_QUEUE + (i & 1));
last_depth = current_depth;
}
#endif
}
#endif // MAX7219_DEBUG

0
Marlin/src/feature/leds/Max7219_Debug_LEDs.h → Marlin/src/feature/Max7219_Debug_LEDs.h

237
Marlin/src/feature/leds/Max7219_Debug_LEDs.cpp

@ -1,237 +0,0 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* This module is off by default, but can be enabled to facilitate the display of
* extra debug information during code development. It assumes the existence of a
* Max7219 LED Matrix. A suitable device can be obtained on eBay similar to this:
* http://www.ebay.com/itm/191781645249 for under $2.00 including shipping.
*
* Just connect up +5v and GND to give it power, then connect up the pins assigned
* in Configuration_adv.h. For example, on the Re-ARM you could use:
*
* #define MAX7219_CLK_PIN 77
* #define MAX7219_DIN_PIN 78
* #define MAX7219_LOAD_PIN 79
*
* Max7219_init() is called automatically at startup, and then there are a number of
* support functions available to control the LEDs in the 8x8 grid.
*
* void Max7219_init();
* void Max7219_PutByte(uint8_t data);
* void Max7219(uint8_t reg, uint8_t data);
* void Max7219_LED_On(uint8_t row, uint8_t col);
* void Max7219_LED_Off(uint8_t row, uint8_t col);
* void Max7219_LED_Toggle(uint8_t row, uint8_t col);
* void Max7219_Clear_Row(uint8_t row);
* void Max7219_Clear_Column(uint8_t col);
* void Max7219_Set_Row(uint8_t row, uint8_t val);
* void Max7219_Set_Column(uint8_t col, uint8_t val);
* void Max7219_idle_tasks();
*/
#include "../../inc/MarlinConfig.h"
#if ENABLED(MAX7219_DEBUG)
#include "Max7219_Debug_LEDs.h"
#include "../../module/planner.h"
#include "../../module/stepper.h"
#include "../../Marlin.h"
static uint8_t LEDs[8] = { 0 };
void Max7219_PutByte(uint8_t data) {
for (uint8_t i = 8; i--;) {
WRITE(MAX7219_CLK_PIN, LOW); // tick
WRITE(MAX7219_DIN_PIN, (data & 0x80) ? HIGH : LOW); // send 1 or 0 based on data bit
WRITE(MAX7219_CLK_PIN, HIGH); // tock
data <<= 1;
}
}
void Max7219(const uint8_t reg, const uint8_t data) {
WRITE(MAX7219_LOAD_PIN, LOW); // begin
Max7219_PutByte(reg); // specify register
Max7219_PutByte(data); // put data
WRITE(MAX7219_LOAD_PIN, LOW); // and tell the chip to load the data
WRITE(MAX7219_LOAD_PIN, HIGH);
}
void Max7219_LED_Set(const uint8_t row, const uint8_t col, const bool on) {
if (row > 7 || col > 7) return;
if (TEST(LEDs[row], col) == on) return; // if LED is already on/off, leave alone
if (on) SBI(LEDs[row], col); else CBI(LEDs[row], col);
Max7219(8 - row, LEDs[row]);
}
void Max7219_LED_On(const uint8_t row, const uint8_t col) {
Max7219_LED_Set(row, col, true);
}
void Max7219_LED_Off(const uint8_t row, const uint8_t col) {
Max7219_LED_Set(row, col, false);
}
void Max7219_LED_Toggle(const uint8_t row, const uint8_t col) {
if (row > 7 || col > 7) return;
if (TEST(LEDs[row], col))
Max7219_LED_Off(row, col);
else
Max7219_LED_On(row, col);
}
void Max7219_Clear_Column(const uint8_t col) {
if (col > 7) return;
LEDs[col] = 0;
Max7219(8 - col, LEDs[col]);
}
void Max7219_Clear_Row(const uint8_t row) {
if (row > 7) return;
for (uint8_t c = 0; c <= 7; c++)
Max7219_LED_Off(c, row);
}
void Max7219_Set_Row(const uint8_t row, const uint8_t val) {
if (row > 7) return;
for (uint8_t b = 0; b <= 7; b++)
if (TEST(val, b))
Max7219_LED_On(7 - b, row);
else
Max7219_LED_Off(7 - b, row);
}
void Max7219_Set_Column(const uint8_t col, const uint8_t val) {
if (col > 7) return;
LEDs[col] = val;
Max7219(8 - col, LEDs[col]);
}
void Max7219_init() {
uint8_t i, x, y;
SET_OUTPUT(MAX7219_DIN_PIN);
SET_OUTPUT(MAX7219_CLK_PIN);
OUT_WRITE(MAX7219_LOAD_PIN, HIGH);
//initiation of the max 7219
Max7219(max7219_reg_scanLimit, 0x07);
Max7219(max7219_reg_decodeMode, 0x00); // using an led matrix (not digits)
Max7219(max7219_reg_shutdown, 0x01); // not in shutdown mode
Max7219(max7219_reg_displayTest, 0x00); // no display test
Max7219(max7219_reg_intensity, 0x01 & 0x0F); // the first 0x0F is the value you can set
// range: 0x00 to 0x0F
for (i = 0; i <= 7; i++) { // empty registers, turn all LEDs off
LEDs[i] = 0x00;
Max7219(i + 1, 0);
}
for (x = 0; x <= 7; x++) // Do an aesthetically pleasing pattern to fully test
for (y = 0; y <= 7; y++) { // the Max7219 module and LEDs. First, turn them
Max7219_LED_On(x, y); // all on.
delay(3);
}
for (x = 0; x <= 7; x++) // Now, turn them all off.
for (y = 0; y <= 7; y++) {
Max7219_LED_Off(x, y);
delay(3); // delay() is OK here. Max7219_init() is only called from
} // setup() and nothing is running yet.
delay(150);
for (x = 8; x--;) // Now, do the same thing from the opposite direction
for (y = 0; y <= 7; y++) {
Max7219_LED_On(x, y);
delay(2);
}
for (x = 8; x--;)
for (y = 0; y <= 7; y++) {
Max7219_LED_Off(x, y);
delay(2);
}
}
/**
* These are sample debug features to demonstrate the usage of the 8x8 LED Matrix for debug purposes.
* There is very little CPU burden added to the system by displaying information within the idle()
* task.
*
* But with that said, if your debugging can be facilitated by making calls into the library from
* other places in the code, feel free to do it. The CPU burden for a few calls to toggle an LED
* or clear a row is not very significant.
*/
void Max7219_idle_tasks() {
#if ENABLED(MAX7219_DEBUG_PRINTER_ALIVE)
static int debug_cnt = 0;
if (debug_cnt++ > 100) {
Max7219_LED_Toggle(7, 7);
debug_cnt = 0;
}
#endif
#ifdef MAX7219_DEBUG_STEPPER_HEAD
Max7219_Clear_Row(MAX7219_DEBUG_STEPPER_HEAD);
Max7219_Clear_Row(MAX7219_DEBUG_STEPPER_HEAD + 1);
if ( planner.block_buffer_head < 8)
Max7219_LED_On( planner.block_buffer_head, MAX7219_DEBUG_STEPPER_HEAD);
else
Max7219_LED_On( planner.block_buffer_head-8, MAX7219_DEBUG_STEPPER_HEAD+1);
#endif
#ifdef MAX7219_DEBUG_STEPPER_TAIL
Max7219_Clear_Row(MAX7219_DEBUG_STEPPER_TAIL);
Max7219_Clear_Row(MAX7219_DEBUG_STEPPER_TAIL + 1);
if ( planner.block_buffer_tail < 8)
Max7219_LED_On( planner.block_buffer_tail, MAX7219_DEBUG_STEPPER_TAIL );
else
Max7219_LED_On( planner.block_buffer_tail-8, MAX7219_DEBUG_STEPPER_TAIL+1 );
#endif
#ifdef MAX7219_DEBUG_STEPPER_QUEUE
static int16_t last_depth = 0;
int16_t current_depth = planner.block_buffer_head - planner.block_buffer_tail;
if (current_depth != last_depth) { // usually, no update will be needed.
if (current_depth < 0) current_depth += BLOCK_BUFFER_SIZE;
NOMORE(current_depth, BLOCK_BUFFER_SIZE);
NOMORE(current_depth, 16); // if the BLOCK_BUFFER_SIZE is greater than 16, two lines
// of LEDs is enough to see if the buffer is draining
const uint8_t st = min(current_depth, last_depth),
en = max(current_depth, last_depth);
if (current_depth < last_depth)
for (uint8_t i = st; i <= en; i++) // clear the highest order LEDs
Max7219_LED_Off(i >> 1, MAX7219_DEBUG_STEPPER_QUEUE + (i & 1));
else
for (uint8_t i = st; i <= en; i++) // set the highest order LEDs
Max7219_LED_On(i >> 1, MAX7219_DEBUG_STEPPER_QUEUE + (i & 1));
last_depth = current_depth;
}
#endif
}
#endif // MAX7219_DEBUG

10
Marlin/src/feature/leds/blinkm.cpp

@ -25,20 +25,20 @@
* Created by Tim Koster, August 21 2013.
*/
#include "../../Marlin.h"
#include "../../inc/MarlinConfig.h"
#if ENABLED(BLINKM)
#include "blinkm.h"
void SendColors(byte red, byte grn, byte blu) {
void blinkm_set_led_color(const byte r, const byte g, const byte b) {
Wire.begin();
Wire.beginTransmission(0x09);
Wire.write('o'); //to disable ongoing script, only needs to be used once
Wire.write('n');
Wire.write(red);
Wire.write(grn);
Wire.write(blu);
Wire.write(r);
Wire.write(g);
Wire.write(b);
Wire.endTransmission();
}

9
Marlin/src/feature/leds/blinkm.h

@ -25,7 +25,12 @@
* Created by Tim Koster, August 21 2013.
*/
#ifndef __BLINKM_H__
#define __BLINKM_H__
#include "Arduino.h"
#include "Wire.h"
#include <Wire.h>
void blinkm_set_led_color(const uint8_t r, const uint8_t g, const uint8_t b);
void SendColors(byte red, byte grn, byte blu);
#endif // __BLINKM_H__

73
Marlin/src/feature/leds/leds.cpp

@ -0,0 +1,73 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Marlin RGB LED general support
*/
#include "../../inc/MarlinConfig.h"
#if HAS_COLOR_LEDS
#include "leds.h"
void set_led_color(
const uint8_t r, const uint8_t g, const uint8_t b
#if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_RGBW_LED)
, const uint8_t w
#if ENABLED(NEOPIXEL_RGBW_LED)
, bool isSequence
#endif
#endif
) {
#if ENABLED(NEOPIXEL_RGBW_LED)
if (neopixel_set_led_color(r, g, b, w, isSequence))
return;
#endif
#if ENABLED(BLINKM)
blinkm_set_led_color(r, g, b); // Use i2c to send the RGB components to the device.
#endif
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
// This variant uses 3 separate pins for the RGB components.
// If the pins can do PWM then their intensity will be set.
WRITE(RGB_LED_R_PIN, r ? HIGH : LOW);
WRITE(RGB_LED_G_PIN, g ? HIGH : LOW);
WRITE(RGB_LED_B_PIN, b ? HIGH : LOW);
analogWrite(RGB_LED_R_PIN, r);
analogWrite(RGB_LED_G_PIN, g);
analogWrite(RGB_LED_B_PIN, b);
#if ENABLED(RGBW_LED)
WRITE(RGB_LED_W_PIN, w ? HIGH : LOW);
analogWrite(RGB_LED_W_PIN, w);
#endif
#endif
#if ENABLED(PCA9632)
pca9632_set_led_color(r, g, b); // Update I2C LED driver
#endif
}
#endif // HAS_COLOR_LEDS

53
Marlin/src/feature/leds/leds.h

@ -0,0 +1,53 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Marlin general RGB LED support
*/
#ifndef __LEDS_H__
#define __LEDS_H__
#if ENABLED(NEOPIXEL_RGBW_LED)
#include <Adafruit_NeoPixel.h>
#include "neopixel.h"
#endif
#if ENABLED(BLINKM)
#include "blinkm.h"
#endif
#if ENABLED(PCA9632)
#include "pca9632.h"
#endif
void set_led_color(
const uint8_t r, const uint8_t g, const uint8_t b
#if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_RGBW_LED)
, const uint8_t w = 0
#if ENABLED(NEOPIXEL_RGBW_LED)
, bool isSequence = false
#endif
#endif
);
#endif // __LEDS_H__

72
Marlin/src/feature/leds/neopixel.cpp

@ -0,0 +1,72 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Marlin RGB LED general support
*/
#include "../../inc/MarlinConfig.h"
#if ENABLED(NEOPIXEL_RGBW_LED)
#include "neopixel.h"
Adafruit_NeoPixel pixels(NEOPIXEL_PIXELS, NEOPIXEL_PIN, NEO_GRBW + NEO_KHZ800);
void set_neopixel_color(const uint32_t color) {
for (uint16_t i = 0; i < pixels.numPixels(); ++i)
pixels.setPixelColor(i, color);
pixels.show();
}
void setup_neopixel() {
pixels.setBrightness(255); // 0 - 255 range
pixels.begin();
pixels.show(); // initialize to all off
#if ENABLED(NEOPIXEL_STARTUP_TEST)
delay(2000);
set_neopixel_color(pixels.Color(255, 0, 0, 0)); // red
delay(2000);
set_neopixel_color(pixels.Color(0, 255, 0, 0)); // green
delay(2000);
set_neopixel_color(pixels.Color(0, 0, 255, 0)); // blue
delay(2000);
#endif
set_neopixel_color(pixels.Color(0, 0, 0, 255)); // white
}
bool neopixel_set_led_color(const uint8_t r, const uint8_t g, const uint8_t b, const uint8_t w, const bool isSequence) {
const uint32_t color = pixels.Color(r, g, b, w);
static uint16_t nextLed = 0;
if (!isSequence)
set_neopixel_color(color);
else {
pixels.setPixelColor(nextLed, color);
pixels.show();
if (++nextLed >= pixels.numPixels()) nextLed = 0;
return true;
}
return false;
}
#endif // NEOPIXEL_RGBW_LED

38
Marlin/src/feature/leds/neopixel.h

@ -0,0 +1,38 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Neopixel support
*/
#ifndef __NEOPIXEL_H__
#define __NEOPIXEL_H__
#include <Adafruit_NeoPixel.h>
#include <stdint.h>
void setup_neopixel();
bool neopixel_set_led_color(const uint8_t r, const uint8_t g, const uint8_t b, const uint8_t w, const bool isSequence);
extern Adafruit_NeoPixel pixels;
#endif // __NEOPIXEL_H__

3
Marlin/src/feature/leds/pca9632.cpp

@ -35,7 +35,6 @@
#define PCA9632_MODE2_VALUE 0b00010101 //(DIMMING, INVERT, CHANGE ON STOP,TOTEM)
#define PCA9632_LEDOUT_VALUE 0b00101010
/* Register addresses */
#define PCA9632_MODE1 0x00
#define PCA9632_MODE2 0x01
@ -98,7 +97,7 @@ static void PCA9632_WriteAllRegisters(const byte addr, const byte regadd, const
}
#endif
void PCA9632_SetColor(const byte r, const byte g, const byte b) {
void pca9632_set_led_color(const byte r, const byte g, const byte b) {
if (!PCA_init) {
PCA_init = 1;
Wire.begin();

4
Marlin/src/feature/leds/pca9632.h

@ -29,8 +29,8 @@
#define __PCA9632_H__
#include "Arduino.h"
#include "Wire.h"
#include <Wire.h>
void PCA9632_SetColor(const byte r, const byte g, const byte b);
void pca9632_set_led_color(const byte r, const byte g, const byte b);
#endif // __PCA9632_H__

4
Marlin/src/gcode/queue.cpp

@ -32,6 +32,10 @@
#include "../module/planner.h"
#include "../Marlin.h"
#if HAS_COLOR_LEDS
#include "../feature/leds/leds.h"
#endif
/**
* GCode line number handling. Hosts may opt to include line numbers when
* sending commands to Marlin, and lines will be checked for sequentiality.

4
Marlin/src/gcode/temperature/M109.cpp

@ -34,6 +34,10 @@
#include "../../module/motion.h"
#endif
#if HAS_COLOR_LEDS
#include "../../feature/leds/leds.h"
#endif
/**
* M109: Sxxx Wait for extruder(s) to reach temperature. Waits only when heating.
* Rxxx Wait for extruder(s) to reach temperature. Waits when heating and cooling.

Loading…
Cancel
Save