thisiskeithb
6 years ago
committed by
Scott Lahteine
Scott Lahteine
6 changed files with 187 additions and 1 deletions
@ -0,0 +1,118 @@ |
|||
/**
|
|||
* Marlin 3D Printer Firmware |
|||
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|||
* |
|||
* Based on Sprinter and grbl. |
|||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm |
|||
* |
|||
* This program is free software: you can redistribute it and/or modify |
|||
* it under the terms of the GNU General Public License as published by |
|||
* the Free Software Foundation, either version 3 of the License, or |
|||
* (at your option) any later version. |
|||
* |
|||
* This program is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|||
* GNU General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU General Public License |
|||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
* |
|||
*/ |
|||
|
|||
/**
|
|||
* MKS Robin nano (STM32F130VET6) board pin assignments |
|||
*/ |
|||
|
|||
#ifndef __STM32F1__ |
|||
#error "Oops! Select an STM32F1 board in 'Tools > Board.'" |
|||
#endif |
|||
|
|||
#if HOTENDS > 2 || E_STEPPERS > 2 |
|||
#error "MKS Robin nano supports up to 2 hotends / E-steppers. Comment out this line to continue." |
|||
#endif |
|||
|
|||
#define BOARD_NAME "MKS Robin nano" |
|||
|
|||
//
|
|||
// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
|
|||
//
|
|||
#define DISABLE_DEBUG |
|||
|
|||
//
|
|||
// Note: MKS Robin board is using SPI2 interface.
|
|||
//
|
|||
#define SPI_MODULE 2 |
|||
|
|||
//
|
|||
// Limit Switches
|
|||
//
|
|||
#define X_STOP_PIN PA15 |
|||
#define Y_STOP_PIN PA12 |
|||
#define Z_MIN_PIN PA11 |
|||
#define Z_MAX_PIN PC4 |
|||
|
|||
//
|
|||
// Steppers
|
|||
//
|
|||
#define X_ENABLE_PIN PE4 |
|||
#define X_STEP_PIN PE3 |
|||
#define X_DIR_PIN PE2 |
|||
|
|||
#define Y_ENABLE_PIN PE1 |
|||
#define Y_STEP_PIN PE0 |
|||
#define Y_DIR_PIN PB9 |
|||
|
|||
#define Z_ENABLE_PIN PB8 |
|||
#define Z_STEP_PIN PB5 |
|||
#define Z_DIR_PIN PB4 |
|||
|
|||
#define E0_ENABLE_PIN PB3 |
|||
#define E0_STEP_PIN PD6 |
|||
#define E0_DIR_PIN PD3 |
|||
|
|||
#define E1_ENABLE_PIN PA3 |
|||
#define E1_STEP_PIN PA6 |
|||
#define E1_DIR_PIN PA1 |
|||
|
|||
//
|
|||
// Temperature Sensors
|
|||
//
|
|||
#define TEMP_0_PIN PC1 // TH1
|
|||
#define TEMP_1_PIN PC2 // TH2
|
|||
#define TEMP_BED_PIN PC0 // TB1
|
|||
|
|||
//
|
|||
// Heaters / Fans
|
|||
//
|
|||
#define HEATER_0_PIN PC3 // HEATER1
|
|||
#define HEATER_1_PIN PB0 // HEATER2
|
|||
#define HEATER_BED_PIN PA0 // HOT BED
|
|||
|
|||
#define FAN_PIN PA1 // FAN
|
|||
|
|||
#define BTN_ENC PC13 // Pin is not connected. Real pin is needed to enable encoder's push button functionality used by touch screen
|
|||
|
|||
//#define MAX6675_SS_PIN PE5 // TC1 - CS1
|
|||
//#define MAX6675_SS_PIN PE6 // TC2 - CS2
|
|||
|
|||
#define POWER_LOSS_PIN PA2 // PW_DET
|
|||
#define PS_ON_PIN PA3 // PW_OFF
|
|||
#define FIL_RUNOUT_PIN PA4 // MT_DET
|
|||
|
|||
#define BEEPER_PIN PC5 |
|||
#define LED_PIN PB2 |
|||
|
|||
/**
|
|||
* Note: MKS Robin TFT screens may have different TFT controllers |
|||
* If the screen stays white, disable 'LCD_RESET_PIN' to rely on the bootloader to do screen initialization. |
|||
*/ |
|||
#define LCD_RESET_PIN PF6 |
|||
#define NO_LCD_REINIT // Suppress LCD re-initialization
|
|||
|
|||
#define LCD_BACKLIGHT_PIN PD13 |
|||
#define FSMC_CS_PIN PD7 // NE4
|
|||
#define FSMC_RS_PIN PD11 // A0
|
|||
#define TOUCH_CS PA7 |
|||
|
|||
#define SD_DETECT_PIN PD12 |
|||
@ -0,0 +1,14 @@ |
|||
MEMORY |
|||
{ |
|||
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K - 40 |
|||
rom (rx) : ORIGIN = 0x08007000, LENGTH = 512K - 28K |
|||
} |
|||
|
|||
/* Provide memory region aliases for common.inc */ |
|||
REGION_ALIAS("REGION_TEXT", rom); |
|||
REGION_ALIAS("REGION_DATA", ram); |
|||
REGION_ALIAS("REGION_BSS", ram); |
|||
REGION_ALIAS("REGION_RODATA", rom); |
|||
|
|||
/* Let common.inc handle the real work. */ |
|||
INCLUDE common.inc |
|||
@ -0,0 +1,30 @@ |
|||
Import("env") |
|||
|
|||
# Relocate firmware from 0x08000000 to 0x08007000 |
|||
for define in env['CPPDEFINES']: |
|||
if define[0] == "VECT_TAB_ADDR": |
|||
env['CPPDEFINES'].remove(define) |
|||
env['CPPDEFINES'].append(("VECT_TAB_ADDR", "0x08007000")) |
|||
env.Replace(LDSCRIPT_PATH="buildroot/share/PlatformIO/ldscripts/mks_robin_nano.ld") |
|||
|
|||
# Encrypt ${PROGNAME}.bin and save it as 'Robin_nano.bin' |
|||
def encrypt(source, target, env): |
|||
import os |
|||
|
|||
key = [0xA3, 0xBD, 0xAD, 0x0D, 0x41, 0x11, 0xBB, 0x8D, 0xDC, 0x80, 0x2D, 0xD0, 0xD2, 0xC4, 0x9B, 0x1E, 0x26, 0xEB, 0xE3, 0x33, 0x4A, 0x15, 0xE4, 0x0A, 0xB3, 0xB1, 0x3C, 0x93, 0xBB, 0xAF, 0xF7, 0x3E] |
|||
|
|||
firmware = open(target[0].path, "rb") |
|||
robin = open(target[0].dir.path +'/Robin_nano.bin', "wb") |
|||
length = os.path.getsize(target[0].path) |
|||
position = 0 |
|||
try: |
|||
while position < length: |
|||
byte = firmware.read(1) |
|||
if position >= 320 and position < 31040: |
|||
byte = chr(ord(byte) ^ key[position & 31]) |
|||
robin.write(byte) |
|||
position += 1 |
|||
finally: |
|||
firmware.close() |
|||
robin.close() |
|||
env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", encrypt); |
|||
Loading…
Reference in new issue