thisiskeithb
4 years ago
committed by
GitHub
GitHub
8 changed files with 200 additions and 322 deletions
@ -0,0 +1,188 @@ |
|||
/**
|
|||
* Marlin 3D Printer Firmware |
|||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|||
* |
|||
* Based on Sprinter and grbl. |
|||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
|||
* |
|||
* This program is free software: you can redistribute it and/or modify |
|||
* it under the terms of the GNU General Public License as published by |
|||
* the Free Software Foundation, either version 3 of the License, or |
|||
* (at your option) any later version. |
|||
* |
|||
* This program is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|||
* GNU General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU General Public License |
|||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
* |
|||
*/ |
|||
#pragma once |
|||
|
|||
/**
|
|||
* MKS Robin E3 & E3D (STM32F103RCT6) common board pin assignments |
|||
*/ |
|||
|
|||
#ifndef __STM32F1__ |
|||
#error "Oops! Select an STM32F1 board in 'Tools > Board.'" |
|||
#endif |
|||
|
|||
#define BOARD_WEBSITE_URL "github.com/makerbase-mks" |
|||
|
|||
//#define DISABLE_DEBUG
|
|||
#define DISABLE_JTAG |
|||
#define ENABLE_SPI2 |
|||
|
|||
//
|
|||
// EEPROM
|
|||
//
|
|||
#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) |
|||
#define FLASH_EEPROM_EMULATION |
|||
#define EEPROM_PAGE_SIZE (0x800U) // 2KB
|
|||
#define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL) |
|||
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB
|
|||
#endif |
|||
|
|||
//
|
|||
// Servos
|
|||
//
|
|||
#define SERVO0_PIN PA3 |
|||
|
|||
//
|
|||
// Limit Switches
|
|||
//
|
|||
#define X_STOP_PIN PA12 |
|||
#define Y_STOP_PIN PA11 |
|||
#define Z_MIN_PIN PC6 |
|||
#define Z_MAX_PIN PB1 |
|||
|
|||
//
|
|||
// Steppers
|
|||
//
|
|||
#define X_STEP_PIN PC0 |
|||
#define X_DIR_PIN PB2 |
|||
#define X_ENABLE_PIN PC13 |
|||
|
|||
#define Y_STEP_PIN PC2 |
|||
#define Y_DIR_PIN PB9 |
|||
#define Y_ENABLE_PIN PB12 |
|||
|
|||
#define Z_STEP_PIN PB7 |
|||
#define Z_DIR_PIN PB6 |
|||
#define Z_ENABLE_PIN PB8 |
|||
|
|||
#define E0_STEP_PIN PB4 |
|||
#define E0_DIR_PIN PB3 |
|||
#define E0_ENABLE_PIN PB5 |
|||
|
|||
#if HAS_TMC220x |
|||
/**
|
|||
* TMC2208/TMC2209 stepper drivers |
|||
* |
|||
* Hardware serial communication ports. |
|||
* If undefined software serial is used according to the pins below |
|||
*/ |
|||
//#define X_HARDWARE_SERIAL Serial1
|
|||
//#define Y_HARDWARE_SERIAL Serial1
|
|||
//#define Z_HARDWARE_SERIAL Serial1
|
|||
//#define E0_HARDWARE_SERIAL Serial1
|
|||
|
|||
//
|
|||
// Software serial
|
|||
//
|
|||
#define X_SERIAL_TX_PIN PC7 |
|||
#define X_SERIAL_RX_PIN PC7 |
|||
|
|||
#define Y_SERIAL_TX_PIN PD2 |
|||
#define Y_SERIAL_RX_PIN PD2 |
|||
|
|||
#define Z_SERIAL_TX_PIN PC12 |
|||
#define Z_SERIAL_RX_PIN PC12 |
|||
|
|||
#define E0_SERIAL_TX_PIN PC11 |
|||
#define E0_SERIAL_RX_PIN PC11 |
|||
|
|||
// Reduce baud rate to improve software serial reliability
|
|||
#define TMC_BAUD_RATE 19200 |
|||
#endif |
|||
|
|||
//
|
|||
// Heaters 0,1 / Fans / Bed
|
|||
//
|
|||
#define HEATER_0_PIN PC9 |
|||
#define FAN_PIN PA8 |
|||
#define HEATER_BED_PIN PC8 |
|||
|
|||
//
|
|||
// Temperature Sensors
|
|||
//
|
|||
#define TEMP_BED_PIN PA1 // TB
|
|||
#define TEMP_0_PIN PA0 // TH1
|
|||
|
|||
#define FIL_RUNOUT_PIN PB10 // MT_DET
|
|||
|
|||
/**
|
|||
* _____ _____ _____ |
|||
* (BEEPER) PC1 | 1 2 | PC3 (BTN_ENC) (MISO) PB14 | 1 2 | PB13 (SD_SCK) 5V | 1 2 | GND |
|||
* (LCD_EN) PA4 | 3 4 | PA5 (LCD_RS) (BTN_EN1) PB11 | 3 4 | PA15 (SD_SS) (LCD_EN) PA4 | 3 4 | PA5 (LCD_RS) |
|||
* (LCD_D4) PA6 | 5 6 PA7 (LCD_D5) (BTN_EN2) PB0 | 5 6 PB15 (SD_MOSI) (LCD_D4) PA6 | 5 6 PB0 (BTN_EN2) |
|||
* (LCD_D6) PC4 | 7 8 | PC5 (LCD_D7) (SD_DETECT) PC10 | 7 8 | RESET RESET | 7 8 | PB11 (BTN_EN1) |
|||
* GND | 9 10| 5V GND | 9 10| NC (BTN_ENC) PC3 | 9 10| PC1 (BEEPER) |
|||
* ----- ----- ----- |
|||
* EXP1 EXP2 EXP3 |
|||
*/ |
|||
#if HAS_SPI_LCD |
|||
|
|||
#define BEEPER_PIN PC1 |
|||
#define BTN_ENC PC3 |
|||
#define LCD_PINS_ENABLE PA4 |
|||
#define LCD_PINS_RS PA5 |
|||
#define BTN_EN1 PB11 |
|||
#define BTN_EN2 PB0 |
|||
|
|||
// MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
|
|||
#if ENABLED(MKS_MINI_12864) |
|||
|
|||
#define LCD_BACKLIGHT_PIN -1 |
|||
#define LCD_RESET_PIN -1 |
|||
#define DOGLCD_A0 PC4 |
|||
#define DOGLCD_CS PA7 |
|||
#define DOGLCD_SCK PB13 |
|||
#define DOGLCD_MOSI PB15 |
|||
|
|||
#undef SHOW_BOOTSCREEN |
|||
|
|||
#else |
|||
|
|||
#define LCD_PINS_D4 PA6 |
|||
#if ENABLED(ULTIPANEL) |
|||
#define LCD_PINS_D5 PA7 |
|||
#define LCD_PINS_D6 PC4 |
|||
#define LCD_PINS_D7 PC5 |
|||
#endif |
|||
|
|||
#endif // !MKS_MINI_12864
|
|||
|
|||
#endif // HAS_SPI_LCD
|
|||
|
|||
//
|
|||
// SD Card
|
|||
//
|
|||
#define ENABLE_SPI2 |
|||
#define SD_DETECT_PIN PC10 |
|||
#define SCK_PIN PB13 |
|||
#define MISO_PIN PB14 |
|||
#define MOSI_PIN PB15 |
|||
#define SS_PIN PA15 |
|||
|
|||
#ifndef ST7920_DELAY_1 |
|||
#define ST7920_DELAY_1 DELAY_NS(125) |
|||
#endif |
|||
#ifndef ST7920_DELAY_2 |
|||
#define ST7920_DELAY_2 DELAY_NS(125) |
|||
#endif |
|||
#ifndef ST7920_DELAY_3 |
|||
#define ST7920_DELAY_3 DELAY_NS(125) |
|||
#endif |
|||
Loading…
Reference in new issue