Browse Source

M701 / M702 language changes

pull/1/head
Scott Lahteine 7 years ago
parent
commit
81211da7b4
  1. 5
      Marlin/src/lcd/language/language_an.h
  2. 7
      Marlin/src/lcd/language/language_ca.h
  3. 8
      Marlin/src/lcd/language/language_cz.h
  4. 8
      Marlin/src/lcd/language/language_cz_utf8.h
  5. 6
      Marlin/src/lcd/language/language_da.h
  6. 8
      Marlin/src/lcd/language/language_de.h
  7. 53
      Marlin/src/lcd/language/language_el.h
  8. 42
      Marlin/src/lcd/language/language_en.h
  9. 6
      Marlin/src/lcd/language/language_es.h
  10. 4
      Marlin/src/lcd/language/language_eu.h
  11. 7
      Marlin/src/lcd/language/language_fr.h
  12. 7
      Marlin/src/lcd/language/language_fr_utf8.h
  13. 7
      Marlin/src/lcd/language/language_gl.h
  14. 6
      Marlin/src/lcd/language/language_hr.h
  15. 8
      Marlin/src/lcd/language/language_it.h
  16. 8
      Marlin/src/lcd/language/language_kana.h
  17. 7
      Marlin/src/lcd/language/language_kana_utf8.h
  18. 11
      Marlin/src/lcd/language/language_nl.h
  19. 6
      Marlin/src/lcd/language/language_pl-DOGM.h
  20. 9
      Marlin/src/lcd/language/language_pl-HD44780.h
  21. 5
      Marlin/src/lcd/language/language_ru.h
  22. 8
      Marlin/src/lcd/language/language_sk_utf8.h
  23. 7
      Marlin/src/lcd/language/language_tr.h
  24. 7
      Marlin/src/lcd/language/language_uk.h
  25. 7
      Marlin/src/lcd/language/language_zh_CN.h
  26. 7
      Marlin/src/lcd/language/language_zh_TW.h

5
Marlin/src/lcd/language/language_an.h

@ -217,9 +217,6 @@
#define MSG_DRIVE_STRENGTH _UxGT("Fuerza d'o driver")
#define MSG_DAC_PERCENT _UxGT("Driver %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Escri. DAC EEPROM")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extruir mas")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Resumir imp.")
//
@ -246,8 +243,6 @@
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("expulsar filament")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Aguardando a")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("cargar filamento")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Aguardando a")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("extruir filamento")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Aguardando impre.")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("pa continar")

7
Marlin/src/lcd/language/language_ca.h

@ -219,11 +219,7 @@
#define MSG_DRIVE_STRENGTH _UxGT("Força motor")
#define MSG_DAC_PERCENT _UxGT("Driver %")
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Write")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrudeix mes")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Repren impressió")
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Temp minima es ")
//
// Filament Change screens show up to 3 lines on a 4-line display
@ -244,8 +240,6 @@
#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Espereu...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Esperant carrega")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("de filament")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Esperant per")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("extreure filament")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Esperant per")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("reprendre")
#else // LCD_HEIGHT < 4
@ -254,7 +248,6 @@
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insereix i prem")
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Escalfant...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Carregant...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrudint...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Reprenent...")
#endif // LCD_HEIGHT < 4

8
Marlin/src/lcd/language/language_cz.h

@ -336,11 +336,7 @@
#define MSG_DRIVE_STRENGTH _UxGT("Buzeni motoru")
#define MSG_DAC_PERCENT _UxGT("Motor %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Ulozit do EEPROM")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Jeste vytlacit")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Obnovit tisk")
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Min. teplota je ")
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Tryska: ")
#define MSG_ERR_HOMING_FAILED _UxGT("Parkovani selhalo")
#define MSG_ERR_PROBING_FAILED _UxGT("Kalibrace selhala")
@ -363,9 +359,6 @@
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Cekejte prosim")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("na zavedeni")
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("filamentu")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Cekejte prosim")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("na vytlaceni")
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("filamentu")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Cekejte prosim")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("na pokracovani")
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("tisku")
@ -376,7 +369,6 @@
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vlozte, kliknete")
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Nahrivani...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Zavadeni...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Vytlacovani...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Pokracovani...")
#endif // LCD_HEIGHT < 4

8
Marlin/src/lcd/language/language_cz_utf8.h

@ -338,11 +338,7 @@
#define MSG_DRIVE_STRENGTH _UxGT("Buzení motorů")
#define MSG_DAC_PERCENT _UxGT("Motor %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Uložit do EEPROM")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Ještě vytlačit")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Obnovit tisk")
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Min. teplota je ")
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Tryska: ")
#define MSG_ERR_HOMING_FAILED _UxGT("Parkování selhalo")
#define MSG_ERR_PROBING_FAILED _UxGT("Kalibrace selhala")
@ -365,9 +361,6 @@
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Čekejte prosím")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("na zavedení")
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("filamentu")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Čekejte prosím")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("na vytlačení")
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("filamentu")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Čekejte prosím")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("na pokračování")
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("tisku")
@ -378,7 +371,6 @@
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vložte, klikněte")
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Nahřívání...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Zavádění...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Vytlačování...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Pokračování...")
#endif // LCD_HEIGHT < 4

6
Marlin/src/lcd/language/language_da.h

@ -217,9 +217,6 @@
#define MSG_DAC_PERCENT _UxGT("Driv %")
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Skriv")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extruder mere")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Forsæt print")
#if LCD_HEIGHT >= 4
@ -233,8 +230,6 @@
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("for at fortsætte...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Vent på")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament indtag")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Vent på")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("filament extrudering")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Vent på at print")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("fortsætter")
#else // LCD_HEIGHT < 4
@ -242,7 +237,6 @@
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Udskyder...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Indsæt og klik")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Indtager...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrudere...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Fortsætter...")
#endif // LCD_HEIGHT < 4

8
Marlin/src/lcd/language/language_de.h

@ -308,11 +308,9 @@
#define MSG_DAC_PERCENT _UxGT("Treiber %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Werte speichern")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("DRUCK PAUSIERT")
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("DRUCK PAUSIERT")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("FORTS. OPTIONEN:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrude mehr")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Drucke weiter")
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Min. Temperatur ist ")
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Düse: ")
#if LCD_HEIGHT >= 4
@ -333,9 +331,6 @@
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Warte auf")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("Laden des")
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("Filaments")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Warte auf")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("Extrusion des")
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("Filaments")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Warte auf")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("Fortsetzung des")
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("Druckes...")
@ -346,7 +341,6 @@
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Laden und Klick")
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heizen...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Laden...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrudieren...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Fortsetzen...")
#endif // LCD_HEIGHT < 4

53
Marlin/src/lcd/language/language_el.h

@ -168,7 +168,6 @@
#define MSG_ERR_MAXTEMP_BED _UxGT("ΜΕΓΙΣΤΗ ΘΕΡΜΟΚΡΑΣΙΑΣ ΕΠ. ΕΚΤΥΠΩΣΗΣ") //SHORTEN
#define MSG_ERR_MINTEMP_BED _UxGT("ΕΛΑΧΙΣΤΗ ΘΕΡΜΟΚΡΑΣΙΑΣ ΕΠ. ΕΚΤΥΠΩΣΗΣ") //SHORTEN
#define MSG_HALTED _UxGT("H εκτύπωση διακόπηκε")
#define MSG_PLEASE_RESET _UxGT("PLEASE RESET") //TRANSLATE
#define MSG_HEATING _UxGT("Θερμαίνεται…")
#define MSG_HEATING_COMPLETE _UxGT("Η θέρμανση ολοκληρώθηκε.") //SHORTEN
#define MSG_BED_HEATING _UxGT("Θέρμανση ΕΠ. Εκτύπωσης") //SHORTEN
@ -179,56 +178,4 @@
#define MSG_DELTA_CALIBRATE_Z _UxGT("Βαθμονόμηση Z")
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Βαθμονόμηση κέντρου")
#define MSG_INFO_MENU _UxGT("About Printer")
#define MSG_INFO_PRINTER_MENU _UxGT("Printer Info")
#define MSG_INFO_STATS_MENU _UxGT("Printer Stats")
#define MSG_INFO_BOARD_MENU _UxGT("Board Info")
#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors")
#define MSG_INFO_EXTRUDERS _UxGT("Extruders")
#define MSG_INFO_BAUDRATE _UxGT("Baud")
#define MSG_INFO_PROTOCOL _UxGT("Protocol")
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT _UxGT("Print Count")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completed ")
#define MSG_INFO_PRINT_TIME _UxGT("Total Time ")
#else
#define MSG_INFO_PRINT_COUNT _UxGT("Prints ")
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completed")
#define MSG_INFO_PRINT_TIME _UxGT("Duration ")
#endif
#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
#define MSG_INFO_PSU _UxGT("PSU")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("CHANGE FILAMENT")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrude more")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Resume print")
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Wait for start")
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("of the filament")
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("change")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wait for")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament unload")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert filament")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("and press button")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("to continue...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wait for")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament load")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Wait for")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("filament extrude")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wait for print")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("to resume")
#else // LCD_HEIGHT < 4
// Up to 2 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Please wait...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejecting...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert and Click")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Loading...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extruding...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Resuming...")
#endif
#endif // LANGUAGE_EL_H

42
Marlin/src/lcd/language/language_en.h

@ -590,6 +590,12 @@
#ifndef MSG_FILAMENT_DIAM
#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.")
#endif
#ifndef MSG_FILAMENT_UNLOAD
#define MSG_FILAMENT_UNLOAD _UxGT("Unload mm")
#endif
#ifndef MSG_FILAMENT_LOAD
#define MSG_FILAMENT_LOAD _UxGT("Load mm")
#endif
#ifndef MSG_ADVANCE_K
#define MSG_ADVANCE_K _UxGT("Advance K")
#endif
@ -689,6 +695,15 @@
#ifndef MSG_FILAMENTCHANGE
#define MSG_FILAMENTCHANGE _UxGT("Change filament")
#endif
#ifndef MSG_FILAMENTLOAD
#define MSG_FILAMENTLOAD _UxGT("Load filament")
#endif
#ifndef MSG_FILAMENTUNLOAD
#define MSG_FILAMENTUNLOAD _UxGT("Unload filament")
#endif
#ifndef MSG_FILAMENTUNLOAD_ALL
#define MSG_FILAMENTUNLOAD_ALL _UxGT("Unload All")
#endif
#ifndef MSG_INIT_SDCARD
#define MSG_INIT_SDCARD _UxGT("Init. SD card")
#endif
@ -918,19 +933,22 @@
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Write")
#endif
#ifndef MSG_FILAMENT_CHANGE_HEADER
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("PRINT PAUSED")
#endif
#ifndef MSG_FILAMENT_CHANGE_HEADER_LOAD
#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("LOAD FILAMENT")
#endif
#ifndef MSG_FILAMENT_CHANGE_HEADER_UNLOAD
#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("UNLOAD FILAMENT")
#endif
#ifndef MSG_FILAMENT_CHANGE_OPTION_HEADER
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
#endif
#ifndef MSG_FILAMENT_CHANGE_OPTION_EXTRUDE
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrude more")
#ifndef MSG_FILAMENT_CHANGE_OPTION_PURGE
#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Purge more")
#endif
#ifndef MSG_FILAMENT_CHANGE_OPTION_RESUME
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Resume print")
#endif
#ifndef MSG_FILAMENT_CHANGE_MINTEMP
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Minimum Temp is ")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Continue")
#endif
#ifndef MSG_FILAMENT_CHANGE_NOZZLE
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Nozzle: ")
@ -973,9 +991,9 @@
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wait for")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament load")
#endif
#ifndef MSG_FILAMENT_CHANGE_EXTRUDE_1
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Wait for")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("filament extrude")
#ifndef MSG_FILAMENT_CHANGE_PURGE_1
#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Wait for")
#define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("filament purge")
#endif
#ifndef MSG_FILAMENT_CHANGE_RESUME_1
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wait for print")
@ -997,8 +1015,8 @@
#ifndef MSG_FILAMENT_CHANGE_LOAD_1
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Loading...")
#endif
#ifndef MSG_FILAMENT_CHANGE_EXTRUDE_1
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extruding...")
#ifndef MSG_FILAMENT_CHANGE_PURGE_1
#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Purging...")
#endif
#ifndef MSG_FILAMENT_CHANGE_RESUME_1
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Resuming...")

6
Marlin/src/lcd/language/language_es.h

@ -226,12 +226,10 @@
#define MSG_DAC_PERCENT _UxGT("Driver %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Escribe DAC EEPROM")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("IMPR. PAUSADA")
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("IMPR. PAUSADA")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("OPC. REINICIO:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extruir mas")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Resumir imp.")
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Temp Minima es ")
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Boquilla: ")
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Esperando iniciar")
@ -254,8 +252,6 @@
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filamento expulsado")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Esperado por")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("Cargar filamento")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Esperado por")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("Extruir filamento")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Esperando imp.")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("para resumir")
#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Oprima boton para")

4
Marlin/src/lcd/language/language_eu.h

@ -225,12 +225,10 @@
#define MSG_DAC_PERCENT _UxGT("Driver %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Idatzi DAC EEPROM")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("HARIZPIA ALDATU")
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("HARIZPIA ALDATU")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("ALDAKETA AUKERAK:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Gehiago estruitu")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Inprima. jarraitu")
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Tenp Minimoa ")
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Pita: ")
#endif // LANGUAGE_EU_H

7
Marlin/src/lcd/language/language_fr.h

@ -305,11 +305,7 @@
#define MSG_DAC_PERCENT _UxGT("Driver %")
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM sauv.")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("+ extrusion")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Reprendre impr.")
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("La temp. minimum est ")
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Buse: ")
#if LCD_HEIGHT >= 4
@ -328,8 +324,6 @@
#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Patientez SVP...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("attente de")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("chargement filament")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("attente de")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("extrusion filament")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("attente impression")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("pour reprendre")
#else // LCD_HEIGHT < 4
@ -338,7 +332,6 @@
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejection...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserer et clic")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Chargement...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrusion...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Reprise...")
#endif // LCD_HEIGHT < 4

7
Marlin/src/lcd/language/language_fr_utf8.h

@ -304,11 +304,7 @@
#define MSG_DAC_PERCENT _UxGT("Driver %")
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM sauv.")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("+ extrusion")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Reprendre impr.")
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("La temp. minimum est ")
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Buse: ")
#if LCD_HEIGHT >= 4
@ -327,8 +323,6 @@
#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Patientez SVP...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("attente de")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("chargement filament")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("attente de")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("extrusion filament")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("attente impression")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("pour reprendre")
#else // LCD_HEIGHT < 4
@ -337,7 +331,6 @@
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejection...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insérer et clic")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Chargement...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrusion...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Reprise...")
#endif // LCD_HEIGHT < 4

7
Marlin/src/lcd/language/language_gl.h

@ -214,9 +214,6 @@
#define MSG_DAC_PERCENT _UxGT("Motor %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Garda DAC EEPROM")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extruir mais")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Segue traballo")
#if LCD_HEIGHT >= 4
@ -233,9 +230,6 @@
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Agarde pola")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("carga do")
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("filamento")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Agarde pola")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("extrusion do")
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("filamento")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Agarde para")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("seguir co")
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("traballo")
@ -245,7 +239,6 @@
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Descargando...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Introduza e click")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Cargando...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extruindo...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Seguindo...")
#endif // LCD_HEIGHT < 4

6
Marlin/src/lcd/language/language_hr.h

@ -214,9 +214,6 @@
#define MSG_DAC_PERCENT _UxGT("Driver %")
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Write")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrudiraj više")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Nastavi print")
#if LCD_HEIGHT >= 4
@ -231,8 +228,6 @@
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("za nastavak...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Pričekaj")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament load")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Pričekaj")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("filament extrude")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wait for print")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("to resume")
#else // LCD_HEIGHT < 4
@ -241,7 +236,6 @@
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejecting...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert and Click")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Loading...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrudiranje...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Nastavljam...")
#endif // LCD_HEIGHT < 4

8
Marlin/src/lcd/language/language_it.h

@ -301,11 +301,9 @@
#define MSG_DAC_PERCENT _UxGT("Driver %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Scrivi DAC EEPROM")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("STAMPA IN PAUSA")
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("STAMPA IN PAUSA")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("OPZIONI:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Estrudi ancora")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Riprendi stampa")
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Temp minima è ")
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Ugello: ")
#if LCD_HEIGHT >= 4
@ -326,9 +324,6 @@
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Attendere")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("il caricamento")
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("del filamento")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Attendere")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("l'estrusione")
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("del filamento")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Attendere")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("la ripresa")
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("della stampa")
@ -339,7 +334,6 @@
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserisci e premi")
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Riscaldamento...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Caricamento...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Estrusione...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Ripresa...")
#endif // LCD_HEIGHT < 4

8
Marlin/src/lcd/language/language_kana.h

@ -285,10 +285,7 @@
#else
#define MSG_DAC_PERCENT "DAC\xbc\xad\xc2\xd8\xae\xb8" // "DACシュツリョク" ("Driver %")
#endif
#define MSG_DAC_EEPROM_WRITE MSG_STORE_EPROM // "メモリヘカクノウ" ("DAC EEPROM Write")
#define MSG_FILAMENT_CHANGE_HEADER "PRINT PAUSED"
#define MSG_FILAMENT_CHANGE_OPTION_HEADER "RESUME OPTIONS:"
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "\xbb\xd7\xc6\xb5\xbc\xc0\xde\xbd" // "サラニオシダス" ("Extrude more")
#define MSG_DAC_EEPROM_WRITE MSG_STORE_EEPROM // "メモリヘカクノウ" ("DAC EEPROM Write")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "\xcc\xdf\xd8\xdd\xc4\xbb\xb2\xb6\xb2" // "プリントサイカイ" ("Resume print")
#if LCD_HEIGHT >= 4
@ -301,8 +298,6 @@
#define MSG_FILAMENT_CHANGE_INSERT_2 "\xb8\xd8\xaf\xb8\xbd\xd9\xc4\xbf\xde\xaf\xba\xb3\xbc\xcf\xbd" // "クリックスルトゾッコウシマス" ("and press button")
#define MSG_FILAMENT_CHANGE_LOAD_1 "\xcc\xa8\xd7\xd2\xdd\xc4\xbf\xb3\xc3\xdd\xc1\xad\xb3" // "フィラメントソウテンチュウ" ("Wait for")
#define MSG_FILAMENT_CHANGE_LOAD_2 "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2" // "シバラクオマチクダサイ" ("filament load")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "\xcc\xa8\xd7\xd2\xdd\xc4\xb5\xbc\xc0\xde\xbc\xc1\xad\xb3" // "フィラメントオシダシチュウ" ("Wait for")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2" // "シバラクオマチクダサイ" ("filament extrude")
#define MSG_FILAMENT_CHANGE_RESUME_1 "\xcc\xdf\xd8\xdd\xc4\xa6\xbb\xb2\xb6\xb2\xbc\xcf\xbd" // "プリントヲサイカイシマス" ("Wait for print")
#define MSG_FILAMENT_CHANGE_RESUME_2 "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2" // "シバラクオマチクダサイ" ("to resume")
#else // LCD_HEIGHT < 4
@ -315,7 +310,6 @@
#define MSG_FILAMENT_CHANGE_INSERT_1 "\xbf\xb3\xc6\xad\xb3\xbc\x2c\xb8\xd8\xaf\xb8\xbe\xd6" // "ソウニュウシ,クリックセヨ" ("Insert and Click")
#endif
#define MSG_FILAMENT_CHANGE_LOAD_1 "\xcc\xa8\xd7\xd2\xdd\xc4\xbf\xb3\xc3\xdd\xc1\xad\xb3" // "フィラメントソウテンチュウ" ("Loading...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "\xcc\xa8\xd7\xd2\xdd\xc4\xb5\xbc\xc0\xde\xbc\xc1\xad\xb3" // "フィラメントオシダシチュウ" ("Extruding...")
#define MSG_FILAMENT_CHANGE_RESUME_1 "\xcc\xdf\xd8\xdd\xc4\xa6\xbb\xb2\xb6\xb2\xbc\xcf\xbd" // "プリントヲサイカイシマス" ("Resuming...")
#endif // LCD_HEIGHT < 4

7
Marlin/src/lcd/language/language_kana_utf8.h

@ -204,10 +204,7 @@
#define MSG_INFO_PSU _UxGT("デンゲンシュベツ") // "Power Supply"
#define MSG_DRIVE_STRENGTH _UxGT("モータークドウリョク") // "Drive Strength"
#define MSG_DAC_PERCENT _UxGT("DACシュツリョク %") // "Driver %"
#define MSG_DAC_EEPROM_WRITE MSG_STORE_EPROM // "DAC EEPROM Write"
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("サラニオシダス") // "Extrude more"
#define MSG_DAC_EEPROM_WRITE MSG_STORE_EEPROM // "DAC EEPROM Write"
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("プリントサイカイ") // "Resume print"
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("コウカンヲカイシシマス") // "Wait for start"
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("シバラクオマチクダサイ") // "of the filament"
@ -217,8 +214,6 @@
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("クリックスルトゾッコウシマス") // "and press button"
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("フィラメントソウテンチュウ") // "Wait for"
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("シバラクオマチクダサイ") // "filament load"
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("フィラメントオシダシチュウ") // "Wait for"
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("シバラクオマチクダサイ") // "filament extrude"
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("プリントヲサイカイシマス") // "Wait for print"
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("シバラクオマチクダサイ") // "to resume"

11
Marlin/src/lcd/language/language_nl.h

@ -226,11 +226,7 @@
#define MSG_DRIVE_STRENGTH _UxGT("Motorstroom")
#define MSG_DAC_PERCENT _UxGT("Driver %") //accepted English term in Dutch
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC Opslaan")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrudeer meer")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Hervat print")
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Minimum Temp is ")
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Nozzle: ") //accepeted English term
//
// Filament Change screens show up to 3 lines on a 4-line display
@ -254,10 +250,7 @@
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wacht voor")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament te")
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("laden")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Wacht voor")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("filament te")
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("extruderen")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wacht voor print")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wacht voor print")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("om verder")
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("te gaan")
#else // LCD_HEIGHT < 4
@ -273,8 +266,6 @@
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("en druk knop")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wacht voor")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("inladen...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Wacht voor")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("extrudering")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wacht voor")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("printing...")
#endif // LCD_HEIGHT < 4

6
Marlin/src/lcd/language/language_pl-DOGM.h

@ -213,9 +213,8 @@
#define MSG_DAC_PERCENT _UxGT("Siła %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Zapisz DAC EEPROM")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("ZMIEŃ FILAMENT")
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("ZMIEŃ FILAMENT")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("ZMIEŃ OPCJE:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Ekstruduj więcej")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Wznów drukowanie")
#if LCD_HEIGHT >= 4
@ -229,8 +228,6 @@
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("aby kontynuować...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("włożenie filamentu")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("ekstruzję filamentu")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("wznowienie druku")
#else // LCD_HEIGHT < 4
@ -239,7 +236,6 @@
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wysuwanie...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Włóż i naciśnij prz.")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Ładowanie...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Ekstruzja...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wznowienie...")
#endif // LCD_HEIGHT < 4

9
Marlin/src/lcd/language/language_pl-HD44780.h

@ -215,9 +215,8 @@
#define MSG_DAC_PERCENT _UxGT("Sila %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Zapisz DAC EEPROM")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("ZMIEN FILAMENT")
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("ZMIEN FILAMENT")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("ZMIEN OPCJE:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Ekstruduj wiecej")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Wznow drukowanie")
#if LCD_HEIGHT >= 4
@ -231,8 +230,6 @@
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("aby kontynuowac...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("wlozenie filamentu")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("ekstruzje filamentu")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("wznowienie druku")
#else // LCD_HEIGHT < 4
@ -241,7 +238,6 @@
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wysuwanie...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Wloz i nacisnij prz.")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Ladowanie...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Ekstruzja...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wznowienie...")
#endif // LCD_HEIGHT < 4
@ -256,8 +252,6 @@
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("aby kontynuowac...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("wlozenie filamentu")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("ekstruzje filamentu")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Czekam na")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("wznowienie druku")
#else // LCD_HEIGHT < 4
@ -266,7 +260,6 @@
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wysuwanie...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Wloz i nacisnij prz.")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Ladowanie...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Ekstruzja...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wznowienie...")
#endif // LCD_HEIGHT < 4

5
Marlin/src/lcd/language/language_ru.h

@ -296,11 +296,9 @@
#define MSG_DRIVE_STRENGTH _UxGT("Сила привода")
#define MSG_DAC_PERCENT _UxGT("Привод %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Записи DAC EEPROM")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("ПЕЧАТЬ ОСТАНОВЛЕНА")
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("ПЕЧАТЬ ОСТАНОВЛЕНА")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("ОПЦИИ ВОЗОБНОВЛЕНИЯ:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Выдавить ещё")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Возобновить печать")
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Мин. температура")
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Сопла: ")
//
// Filament Change screens show up to 3 lines on a 4-line display
@ -329,7 +327,6 @@
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Вставь и нажми")
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Нагрев...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Загрузка...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Выдавливание...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Возобновление...")
#endif // LCD_HEIGHT < 4

8
Marlin/src/lcd/language/language_sk_utf8.h

@ -305,11 +305,9 @@
#define MSG_DAC_PERCENT _UxGT("Motor %")
#define MSG_DAC_EEPROM_WRITE _UxGT("Uložiť do EEPROM")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PAUZA TLAČE")
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("PAUZA TLAČE")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("MOŽN. POKRAČ.:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Ešte vytlačiť")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Obnoviť tlač")
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Min. teplota je ")
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Tryska: ")
#if LCD_HEIGHT >= 4
@ -330,9 +328,6 @@
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Čakajte prosím")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("na zavedenie")
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("filamentu")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Čakajte prosím")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("na vytlačenie")
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("filamentu")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Čakajte prosím")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("na pokračovanie")
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("tlače")
@ -343,7 +338,6 @@
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vložte, kliknite")
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Ohrev...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Zavádzanie...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Vytlačovanie...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Pokračovanie...")
#endif // LCD_HEIGHT < 4

7
Marlin/src/lcd/language/language_tr.h

@ -228,12 +228,8 @@
#define MSG_DRIVE_STRENGTH _UxGT("Sürücü Gücü") // Sürücü Gücü
#define MSG_DAC_PERCENT _UxGT("Sürücü %") // Sürücü %
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("Seçenekler:") // Seçenekler:
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Daha Akıt") // Daha Akıt
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Baskıyı sürdür") // Baskıyı sürdür
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Min. Sıcaklık") // Min. Sıcaklık:
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Nozül: ") // Nozül:
#if LCD_HEIGHT >= 4
@ -252,8 +248,6 @@
#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Lütfen Bekleyin...") // Lütfen Bekleyin...
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Bekleniyor") // Bekleniyor
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filamanın yüklenmesi") // filamanın yüklenmesi
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Bekleniyor") // Bekleniyor
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("filaman akması") // filaman akması
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Baskının sürdürülmesini") // Baskının sürdürülmesini
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("bekle") // bekle
#else // LCD_HEIGHT < 4
@ -262,7 +256,6 @@
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Çıkartılıyor...") // Çıkartılıyor...
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Yükle ve bas") // Yükle ve bas
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Yüklüyor...") // Yüklüyor...
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Akıtılıyor...") // Akıtılıyor...
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Sürdürülüyor...") // Sürdürülüyor...
#endif // LCD_HEIGHT < 4

7
Marlin/src/lcd/language/language_uk.h

@ -204,9 +204,6 @@
#define MSG_DAC_PERCENT _UxGT("% мотору")
#define MSG_DAC_EEPROM_WRITE _UxGT("Запис ЦАП на ПЗП")
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Екструдувати")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Відновити друк")
#if LCD_HEIGHT >= 4
@ -221,9 +218,6 @@
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("продовження...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Зачекайте на")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("ввід волокна")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Зачекайте на")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("екструзію")
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("волокна")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Зачекайте на")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("відновлення")
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("друку")
@ -233,7 +227,6 @@
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Вивід...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Вставте і нат.")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Ввід...")
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Екструзія...")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Відновлення...")
#endif // LCD_HEIGHT < 4

7
Marlin/src/lcd/language/language_zh_CN.h

@ -201,9 +201,6 @@
#define MSG_INFO_MAX_TEMP _UxGT("最高温度") //"Max Temp"
#define MSG_INFO_PSU _UxGT("电源供应") //"Power Supply"
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("挤出更多") //"Extrude more"
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("恢复打印") //"Resume print"
#if LCD_HEIGHT >= 4
@ -219,9 +216,6 @@
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("等待") //"Wait for"
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("进料") //"filament load"
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("") //""
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("等待") //"Wait for"
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("丝料挤出") //"filament extrude"
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("") //""
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("等待打印") //"Wait for print"
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("恢复") //"to resume"
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("") //""
@ -231,7 +225,6 @@
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("退出中 ...") //"Ejecting..."
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入并单击") //"Insert and Click"
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("装载中 ...") //"Loading..."
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("挤出中 ...") //"Extruding..."
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("恢复中 ...") //"Resuming..."
#endif // LCD_HEIGHT < 4

7
Marlin/src/lcd/language/language_zh_TW.h

@ -201,9 +201,6 @@
#define MSG_INFO_MAX_TEMP _UxGT("最高溫度") //"Max Temp"
#define MSG_INFO_PSU _UxGT("電源供應") //"Power Supply"
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("擠出更多") //"Extrude more"
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("恢復列印") //"Resume print"
#if LCD_HEIGHT >= 4
@ -219,9 +216,6 @@
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("等待") //"Wait for"
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("進料") //"filament load"
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("") //""
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("等待") //"Wait for"
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("絲料擠出") //"filament extrude"
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("") //""
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("等待列印") //"Wait for print"
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("恢復") //"to resume"
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("") //""
@ -231,7 +225,6 @@
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("退出中 ...") //"Ejecting..."
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入並點擊") //"Insert and Click"
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("載入中 ...") //"Loading..."
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("擠出中 ...") //"Extruding..."
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("恢復中 ...") //"Resuming..."
#endif // LCD_HEIGHT < 4

Loading…
Cancel
Save