Pins should always be defined (even for disabled features)

8 years ago · 7f81aa7ff3
5 changed files with 7 additions and 19 deletions
--- a/Marlin/pins_A4JP.h
+++ b/Marlin/pins_A4JP.h
@ -74,10 +74,7 @@
  #endif
 #endif // VIKI2/miniVIKI

-#if ENABLED(FILAMENT_SENSOR)
-  //Filip added pin for Filament sensor analog input
-  #define FILWIDTH_PIN        3
-#endif
+#define FILWIDTH_PIN        3  // ANALOG NUMBERING

 /************************************************
 * Rambo pin assignments old
--- a/Marlin/pins_PRINTRBOARD.h
+++ b/Marlin/pins_PRINTRBOARD.h
@ -79,9 +79,7 @@
 #define TEMP_0_PIN          1  // Extruder / Analog pin numbering
 #define TEMP_BED_PIN        0  // Bed / Analog pin numbering

-#if ENABLED(FILAMENT_SENSOR)
-  #define FILWIDTH_PIN      2
-#endif
+#define FILWIDTH_PIN        2  // ANALOG NUMBERING

 #define TEMP_1_PIN         -1
 #define TEMP_2_PIN         -1
--- a/Marlin/pins_PRINTRBOARD_REVF.h
+++ b/Marlin/pins_PRINTRBOARD_REVF.h
@ -73,9 +73,7 @@
 #define TEMP_0_PIN          1  // Extruder / Analog pin numbering
 #define TEMP_BED_PIN        0  // Bed / Analog pin numbering

-#if ENABLED(FILAMENT_SENSOR)
-  #define FILWIDTH_PIN      2
-#endif
+#define FILWIDTH_PIN        2  // ANALOG NUMBERING

 #define TEMP_1_PIN         -1
 #define TEMP_2_PIN         -1
--- a/Marlin/pins_RAMBO.h
+++ b/Marlin/pins_RAMBO.h
@ -112,6 +112,8 @@
 #define LED_PIN            13
 #define FAN_PIN            8

+#define FILWIDTH_PIN        3  // ANALOG NUMBERING
+
 /**********************************************************
  Fan Pins
  Fan_0 8
@ -201,7 +203,3 @@
  #endif
 #endif // VIKI2/miniVIKI

-#if ENABLED(FILAMENT_SENSOR)
-  //Filip added pin for Filament sensor analog input
-  #define FILWIDTH_PIN        3
-#endif
--- a/Marlin/pins_RAMPS_14.h
+++ b/Marlin/pins_RAMPS_14.h
@ -91,11 +91,8 @@
 #define SDSS               53
 #define LED_PIN            13

-#if ENABLED(FILAMENT_SENSOR)  // FMM added for Filament Extruder
-  // define analog pin for the filament width sensor input
-  // Use the RAMPS 1.4 Analog input 5 on the AUX2 connector
-  #define FILWIDTH_PIN      5
-#endif
+// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector
+#define FILWIDTH_PIN        5 // ANALOG NUMBERING

 #if ENABLED(Z_MIN_PROBE_ENDSTOP)
  // Define a pin to use as the signal pin on Arduino for the Z_PROBE endstop.