Modify comment for unlimited E steppers

Marlin/Configuration.h

@@ -714,14 +714,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 500 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

config/default/Configuration.h

@@ -714,14 +714,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 500 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

config/examples/3DFabXYZ/Migbot/Configuration.h

@@ -719,7 +719,7 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 500 }
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 79.9738621, 80.2429911, 399.7264854 , 99.4696994 }
@@ -727,7 +727,7 @@
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 225, 225, 3, 25 }
 
@@ -740,7 +740,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1590, 1590, 100, 10000 }
 

config/examples/ADIMLab/Gantry v1/Configuration.h

@@ -714,14 +714,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80.4, 80.4, 400, 94 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
@@ -729,7 +729,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 2000, 2000, 50, 2000 }
 

config/examples/ADIMLab/Gantry v2/Configuration.h

@@ -714,14 +714,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 100 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

config/examples/AlephObjects/TAZ4/Configuration.h

@@ -734,14 +734,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100.5, 100.5, 400, 850 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 800, 800, 8, 50 }
 
@@ -754,7 +754,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 100, 10000 }
 

config/examples/Alfawise/U20-bltouch/Configuration.h

@@ -777,14 +777,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 98 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 200, 200, 100, 25 }
 
@@ -797,7 +797,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 200, 200, 100, 3000 }
 

config/examples/Alfawise/U20/Configuration.h

@@ -777,14 +777,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 98 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 200, 200, 100, 25 }
 
@@ -797,7 +797,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 200, 200, 100, 3000 }
 

config/examples/AliExpress/CL-260/Configuration.h

@@ -714,14 +714,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 160.6 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

config/examples/AliExpress/UM2pExt/Configuration.h

@@ -725,14 +725,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 200, 355 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 40, 45}
 
@@ -745,7 +745,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

config/examples/Anet/A2/Configuration.h

@@ -714,14 +714,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 400, 95  }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

config/examples/Anet/A2plus/Configuration.h

@@ -714,14 +714,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 400, 95  }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

config/examples/Anet/A6/Configuration.h

@@ -734,7 +734,7 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 500 }
 
@@ -746,7 +746,7 @@
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 //#define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
@@ -765,7 +765,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 //#define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

config/examples/Anet/A8/Configuration.h

@@ -727,14 +727,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 400, 100 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 400, 400, 8, 50 }
 
@@ -747,7 +747,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 2000, 2000, 100, 10000 }
 

config/examples/Anet/A8plus/Configuration.h

@@ -725,14 +725,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 95 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 400, 400, 50, 25 }
 
@@ -745,7 +745,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 2000, 2000, 100, 10000 }
 

config/examples/Anet/E16/Configuration.h

@@ -726,14 +726,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 400, 100 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 50, 25 }
 
@@ -746,7 +746,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 2000, 2000, 100, 10000 }
 

config/examples/AnyCubic/i3/Configuration.h

@@ -724,14 +724,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 96.2 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 6, 25 }
 
@@ -744,7 +744,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1500, 1500, 50, 8000 }
 

config/examples/ArmEd/Configuration.h

@@ -715,14 +715,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 400, 156.84 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 20, 120 }
 
@@ -735,7 +735,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1000, 1000, 1000, 5000 }
 

config/examples/Azteeg/X5GT/Configuration.h

@@ -714,14 +714,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 500 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

config/examples/BIBO/TouchX/cyclops/Configuration.h

@@ -714,14 +714,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 400, 400}
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 350, 350, 10, 50 }
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1100, 1100, 300, 2500 }
 

config/examples/BIBO/TouchX/default/Configuration.h

@@ -714,14 +714,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 400, 93.6 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 350, 350, 10, 25 }
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1100, 1100, 300, 5000 }
 

config/examples/BQ/Hephestos/Configuration.h

@@ -702,14 +702,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 100.47095761381482 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 200, 200, 3.3, 25 }
 
@@ -722,7 +722,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1100, 1100, 100, 10000 }
 

config/examples/BQ/Hephestos_2/Configuration.h

@@ -715,14 +715,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 160, 160, 8000, 218.77 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 3, 120 }
 
@@ -735,7 +735,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 3000 }
 

config/examples/BQ/WITBOX/Configuration.h

@@ -702,14 +702,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 600.0*8/3, 102.073 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 350, 350, 7.2, 80 }
 
@@ -722,7 +722,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1000, 1000, 10, 1000 }
 

config/examples/Cartesio/Configuration.h

@@ -713,14 +713,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 71.128, 71.128, 640, 152 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 200, 200, 20, 20 }
 
@@ -733,7 +733,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1000, 1000, 100, 10000 }
 

config/examples/Creality/CR-10/Configuration.h

@@ -724,14 +724,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 95 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 15, 25 }
 
@@ -744,7 +744,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 500, 500, 100, 5000 }
 

config/examples/Creality/CR-10S/Configuration.h

@@ -714,14 +714,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 95 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 2500, 2500, 100, 25 }
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 500, 500, 100, 5000 }
 

config/examples/Creality/CR-10_5S/Configuration.h

@@ -714,7 +714,7 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 } // Stock Creality
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 415 } // Creality with Bondtech extruder
@@ -722,7 +722,7 @@
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
@@ -735,7 +735,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 300, 300, 100, 5000 }
 

config/examples/Creality/CR-10mini/Configuration.h

@@ -733,14 +733,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 79.60, 80, 400, 95 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 15, 25 }
 
@@ -753,7 +753,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 500, 500, 100, 5000 }
 

config/examples/Creality/CR-20 Pro/Configuration.h

@@ -718,14 +718,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 97 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
@@ -738,7 +738,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 500, 500, 100, 5000 }
 

config/examples/Creality/CR-20/Configuration.h

@@ -718,14 +718,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 97 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
@@ -738,7 +738,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 500, 500, 100, 5000 }
 

config/examples/Creality/CR-8/Configuration.h

@@ -724,14 +724,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 92.60 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
@@ -744,7 +744,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 500, 500, 100, 5000 }
 

config/examples/Creality/Ender-2/Configuration.h

@@ -718,14 +718,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
@@ -738,7 +738,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 500, 500, 100, 5000 }
 

config/examples/Creality/Ender-3/Configuration.h

@@ -718,14 +718,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
@@ -738,7 +738,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 500, 500, 100, 5000 }
 

config/examples/Creality/Ender-4/Configuration.h

@@ -724,14 +724,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT    { 80, 80, 400, 100 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 15, 25 }
 
@@ -744,7 +744,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

config/examples/Creality/Ender-5/Configuration.h

@@ -718,14 +718,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
@@ -738,7 +738,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 500, 500, 100, 5000 }
 

config/examples/Dagoma/Disco Ultimate/Configuration.h

@@ -714,14 +714,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 160, 160, 1600, 196 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 4, 170 }
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 1000, 20, 10000 }
 

config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h

@@ -719,14 +719,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80.121, 80.121, 399.778, 445 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 50, 40 }
 
@@ -739,7 +739,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 2000, 2000, 100, 10000 }
 

config/examples/Einstart-S/Configuration.h

@@ -724,14 +724,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 80, 96.337120 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
@@ -744,7 +744,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 2000, 2000, 100, 10000 }
 

config/examples/FYSETC/AIO_II/Configuration.h

@@ -719,14 +719,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 640, 640, 3200, 800 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
@@ -739,7 +739,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h

@@ -719,14 +719,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
@@ -739,7 +739,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 500, 500, 100, 5000 }
 

config/examples/FYSETC/Cheetah 1.2/base/Configuration.h

@@ -719,14 +719,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
@@ -739,7 +739,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 500, 500, 100, 5000 }
 

config/examples/FYSETC/Cheetah/BLTouch/Configuration.h

@@ -721,14 +721,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
@@ -741,7 +741,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 500, 500, 100, 5000 }
 

config/examples/FYSETC/Cheetah/base/Configuration.h

@@ -719,14 +719,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
@@ -739,7 +739,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 500, 500, 100, 5000 }
 

config/examples/FYSETC/F6_13/Configuration.h

@@ -716,14 +716,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 1280, 1280, 6400, 1600 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
@@ -736,7 +736,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

config/examples/Felix/DUAL/Configuration.h

@@ -696,14 +696,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 76.190476, 76.190476, 1600, 164 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
@@ -716,7 +716,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 5000, 5000, 100, 80000 }
 

config/examples/Felix/Single/Configuration.h

@@ -696,14 +696,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 76.190476, 76.190476, 1600, 164 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
@@ -716,7 +716,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 5000, 5000, 100, 80000 }
 

config/examples/FlashForge/CreatorPro/Configuration.h

@@ -704,7 +704,7 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 //really Sailfish... got enough precision on that float for an 8 bit system?
 //I'm leaving this in for posterior's sake
@@ -713,7 +713,7 @@
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 250, 250, 20, 100 }
 
@@ -726,7 +726,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1000, 1000, 100, 5000 }
 

config/examples/FolgerTech/i3-2020/Configuration.h

@@ -719,7 +719,7 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 52.2 }  // 52.4 is correct for printer as shipped
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 104.4 }   // 104.4 with 32 micro steps enabled gives better results
@@ -727,7 +727,7 @@
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 250, 250, 2, 17 }
 
@@ -740,7 +740,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1000, 1000, 4, 750 }
 

config/examples/Formbot/Raptor/Configuration.h

@@ -766,7 +766,7 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #if ENABLED(Y_2208)
   #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 1600, 96 }
@@ -777,7 +777,7 @@
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 250, 150, 5, 25 }
 
@@ -790,7 +790,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #if ENABLED(X_2208)
   #if ENABLED(X_SPREADCYCLE)

config/examples/Formbot/T_Rex_2+/Configuration.h

@@ -743,14 +743,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 800, 93 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 200, 100, 5, 25 }
 
@@ -763,7 +763,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1500, 500, 400, 4000 }
 

config/examples/Formbot/T_Rex_3/Configuration.h

@@ -723,7 +723,7 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 160, 1600, 93 }
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 800, 93 }
@@ -731,7 +731,7 @@
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 //#define DEFAULT_MAX_FEEDRATE          { 250, 150, 5, 25 }
 #define DEFAULT_MAX_FEEDRATE          { 250, 100, 5, 25 }
@@ -745,7 +745,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1500, 500, 400, 4000 }
 

config/examples/Geeetech/A10/Configuration.h

@@ -697,14 +697,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 93 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
@@ -717,7 +717,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 500, 500, 100, 5000 }
 

config/examples/Geeetech/A10M/Configuration.h

@@ -697,14 +697,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 430 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
@@ -717,7 +717,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 500, 500, 100, 5000 }
 

config/examples/Geeetech/A20M/Configuration.h

@@ -697,14 +697,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 430 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
@@ -717,7 +717,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 500, 500, 100, 5000 }
 

config/examples/Geeetech/GT2560/Configuration.h

@@ -729,14 +729,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 78.74, 78.74, 2560, 105 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 400, 400, 2, 45 }
 
@@ -749,7 +749,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 5000, 5000, 50, 5000 }
 

config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -714,14 +714,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 2560, 93 }  // MXL, Z M8=1.25, MK8
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 400, 400, 2, 45 }
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 4000, 4000, 40, 4000 }
 

config/examples/Geeetech/MeCreator2/Configuration.h

@@ -721,14 +721,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 95 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 250, 250, 400, 45 }
 
@@ -741,7 +741,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 2000, 2000, 100, 10000 }
 

config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h

@@ -729,7 +729,7 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define PRO_B_WITH_LEADSCREW
 #if ENABLED(PRO_B_WITH_LEADSCREW)       // M8 leadscrew version
@@ -741,7 +741,7 @@
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 400, 400, 2, 45 }
 
@@ -754,7 +754,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 5000, 5000, 75, 5000 }
 

config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h

@@ -729,7 +729,7 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define PRO_B_WITH_LEADSCREW
 #if ENABLED(PRO_B_WITH_LEADSCREW)       // M8 leadscrew version
@@ -741,7 +741,7 @@
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 400, 400, 2, 45 }
 
@@ -754,7 +754,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 5000, 5000, 75, 5000 }
 

config/examples/Geeetech/Prusa i3 Pro C/Configuration.h

@@ -714,14 +714,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 2560, 95, 95 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

config/examples/Geeetech/Prusa i3 Pro W/Configuration.h

@@ -714,14 +714,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 2560, 95 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

config/examples/HMS434/Configuration.h

@@ -701,14 +701,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 53.45, 71.19, 160, 169.05 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 1000, 1000, 40, 25 }
 
@@ -721,7 +721,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 500, 500, 100, 10000 }
 

config/examples/Infitary/i3-M508/Configuration.h

@@ -718,14 +718,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 400, 92.6 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 400, 400, 5, 25 }
 
@@ -738,7 +738,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 100, 10000 }
 

config/examples/JGAurora/A1/Configuration.h

@@ -721,14 +721,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 160, 160, 1600, 202 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 360, 150, 30, 40 }
 
@@ -736,7 +736,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1200, 350, 100, 500 }
 

config/examples/JGAurora/A5/Configuration.h

@@ -726,14 +726,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 800, 100 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 15, 25 }
 
@@ -746,7 +746,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1000, 500, 100, 5000 }
 

config/examples/JGAurora/A5S/Configuration.h

@@ -721,14 +721,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 160, 160, 1600, 202 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 360, 150, 30, 40 }
 
@@ -736,7 +736,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1200, 350, 100, 500 }
 

config/examples/MakerParts/Configuration.h

@@ -714,14 +714,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT     { 80, 80, 4000, 97 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE            { 300, 300, 2, 30 } // For 300mm/s printing
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION        { 2400, 2400, 10, 200 }
 

config/examples/Malyan/M150/Configuration.h

@@ -727,7 +727,7 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
                                       // Standard M150 17T MXL on X and Y
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 3200/34.544, 3200/34.544, 1600, 103.00 }
@@ -741,7 +741,7 @@
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
@@ -754,7 +754,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 700, 700, 100, 10000 }
 

config/examples/Malyan/M200/Configuration.h

@@ -724,14 +724,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT    { 93, 93, 1097.5, 97 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
@@ -744,7 +744,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

config/examples/Micromake/C1/basic/Configuration.h

@@ -714,7 +714,7 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 // choose your micro step per step configuration ( 16 factory settings )
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 100, 150 }       // 16  steps per unit for Micromake C1 - Factory Settings - ( MS1 : closed ; MS2 : closed on MAKEBOARD Mini)
@@ -725,7 +725,7 @@
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 200, 200, 200, 30 }
 
@@ -738,7 +738,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
  #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 3000, 4000 }
 

config/examples/Micromake/C1/enhanced/Configuration.h

@@ -714,7 +714,7 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 // choose your micro step per step configuration ( 16 factory settings )
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 100, 150 }       // 16  steps per unit for Micromake C1 - Factory Settings - ( MS1 : closed ; MS2 : closed on MAKEBOARD Mini)
@@ -725,7 +725,7 @@
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
  #define DEFAULT_MAX_FEEDRATE          { 200, 200, 200, 30 }
 
@@ -738,7 +738,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
  #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 3000, 4000 }
 

config/examples/Mks/Robin/Configuration.h

@@ -715,14 +715,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 500 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
@@ -735,7 +735,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

config/examples/Mks/Sbase/Configuration.h

@@ -714,14 +714,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 200, 200, 800, 280 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 100, 10000 }
 

config/examples/Printrbot/PrintrboardG2/Configuration.h

@@ -715,7 +715,7 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 500 }
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 80, 80 }
@@ -723,7 +723,7 @@
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 //#define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 #define DEFAULT_MAX_FEEDRATE          { 30, 30,30,30 }
@@ -737,7 +737,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 //#define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 #define DEFAULT_MAX_ACCELERATION      { 100, 100, 100, 100 }

config/examples/RapideLite/RL200/Configuration.h

@@ -714,14 +714,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 157, 157, 800, 195 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 100, 10000 }
 

config/examples/RepRapPro/Huxley/Configuration.h

@@ -753,14 +753,14 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { XY_STEPS, XY_STEPS, Z_STEPS, E_STEPS }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_Z_FEEDRATE        3.3 // older Huxley has problem with speeds > 3.3 mm/s on Z axis
 #define DEFAULT_MAX_FEEDRATE          { 200, 200, DEFAULT_MAX_Z_FEEDRATE, 25 }
@@ -774,7 +774,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1000, 1000, 50, 1000 }
 

config/examples/RepRapWorld/Megatronics/Configuration.h

@@ -714,14 +714,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 78.7402*2, 78.7402*2, 5120.00, 760*1*1.5 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

config/examples/RigidBot/Configuration.h

@@ -710,7 +710,7 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
  // default steps per unit for RigidBot with standard hardware
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 44.3090, 22.1545, 1600, 53.5 }
@@ -719,7 +719,7 @@
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
@@ -732,7 +732,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 800, 800, 100, 10000 }
 

config/examples/SCARA/Configuration.h

@@ -723,14 +723,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 103.69, 106.65, 200/1.25, 1000 }  // default steps per unit for SCARA
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 30, 25 }
 
@@ -743,7 +743,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 300, 300, 20, 1000 }
 

config/examples/STM32/Black_STM32F407VET6/Configuration.h

@@ -714,14 +714,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 500 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

config/examples/STM32/STM32F103RE/Configuration.h

@@ -716,14 +716,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 78.74, 78.74, 2560, 105.0 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 400, 400, 2, 45 }
 
@@ -736,7 +736,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1400, 1400, 100, 80000 }
 

config/examples/STM32/STM32F4/Configuration.h

@@ -714,14 +714,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 500 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

config/examples/STM32/stm32f103ret6/Configuration.h

@@ -716,14 +716,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 78.74, 78.74, 2560, 105.0 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 400, 400, 2, 45 }
 
@@ -736,7 +736,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1400, 1400, 100, 80000 }
 

config/examples/Sanguinololu/Configuration.h

@@ -745,14 +745,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { XY_STEPS, XY_STEPS, Z_STEPS, E_STEPS }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 8, 45 }
 
@@ -765,7 +765,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

config/examples/Tevo/Michelangelo/Configuration.h

@@ -719,14 +719,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80.165, 80.165, 399.2901, 408 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 60, 55 }
 
@@ -739,7 +739,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 10000, 10000, 400, 10000 }
 

config/examples/Tevo/Tarantula Pro/Configuration.h

@@ -719,14 +719,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80.058, 80.058, 399.2901, 408 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 400, 400, 50, 45 }
 
@@ -739,7 +739,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h

@@ -719,14 +719,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 79.765, 79.765, 399.2901, 400 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 250, 250, 30, 55 }
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 2000, 2000, 120, 10000 }
 

config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h

@@ -719,14 +719,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 79.765, 79.765, 399.2901, 400 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 250, 250, 30, 55 }
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 2000, 2000, 120, 10000 }
 

config/examples/TheBorg/Configuration.h

@@ -714,14 +714,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 200, 200, 800, 280 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 100, 10000 }
 

config/examples/TinyBoy2/Configuration.h

@@ -765,14 +765,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 6400, 88.16 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 7, 35 }
 
@@ -785,7 +785,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

config/examples/Tronxy/X1/Configuration.h

@@ -714,14 +714,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 1600, 90 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 400, 400, 2, 50 }
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 400, 400, 40, 5000 }
 

config/examples/Tronxy/X3A/Configuration.h

@@ -714,14 +714,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 400, 90 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 400, 400, 4, 50 }
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1000, 1000, 1500, 5000 }
 

config/examples/Tronxy/X5S-2E/Configuration.h

@@ -735,14 +735,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 94 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
@@ -755,7 +755,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1000, 1000, 100, 1000 }
 

config/examples/Tronxy/X5S/Configuration.h

@@ -714,14 +714,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 90 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 400, 400, 4, 150 }
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1000, 1000, 1000, 1000 }
 

config/examples/Tronxy/XY100/Configuration.h

@@ -725,14 +725,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 1600, 90 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 400, 400, 4, 50 }
 
@@ -745,7 +745,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 1000, 5000 }
 

config/examples/UltiMachine/Archim1/Configuration.h

@@ -714,14 +714,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 200, 200, 800, 500 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

config/examples/UltiMachine/Archim2/Configuration.h

@@ -714,14 +714,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 500 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
@@ -734,7 +734,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

config/examples/VORONDesign/Configuration.h

@@ -723,14 +723,14 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 608, 608 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 75, 75 }
 
@@ -743,7 +743,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 , 10000 }
 

config/examples/Velleman/K8200/Configuration.h

@@ -744,13 +744,13 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 64.25, 64.25, 2560, 600 }
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
@@ -763,7 +763,7 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 100, 10000 }