andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Corrections for dylsexic TMC

pull/1/head
Scott Lahteine 6 years ago
parent
71d06ef1b2
commit
7d5c336c56
2 changed files with 4 additions and 4 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 2
      Marlin/src/HAL/HAL_STM32F7/TMC2660.cpp
  2. 6
      Marlin/src/HAL/HAL_STM32F7/TMC2660.h

2
Marlin/src/HAL/HAL_STM32F7/TMC2660.cpp
View File

@ -94,7 +94,7 @@
#define STALL_GUARD_CONFIG_PATTERN 0x17F00ul #define STALL_GUARD_CONFIG_PATTERN 0x17F00ul
#define STALL_GUARD_VALUE_PATTERN 0x7F00ul #define STALL_GUARD_VALUE_PATTERN 0x7F00ul
//definitions for the input from the TCM260 //definitions for the input from the TMC2660
#define STATUS_STALL_GUARD_STATUS 0x1ul #define STATUS_STALL_GUARD_STATUS 0x1ul
#define STATUS_OVER_TEMPERATURE_SHUTDOWN 0x2ul #define STATUS_OVER_TEMPERATURE_SHUTDOWN 0x2ul
#define STATUS_OVER_TEMPERATURE_WARNING 0x4ul #define STATUS_OVER_TEMPERATURE_WARNING 0x4ul

6
Marlin/src/HAL/HAL_STM32F7/TMC2660.h
View File

@ -33,14 +33,14 @@
//! return value for TMC26XStepper.getOverTemperature() if there is a overtemperature situation in the TMC chip //! return value for TMC26XStepper.getOverTemperature() if there is a overtemperature situation in the TMC chip
/*! /*!
* This warning indicates that the TCM chip is too warm. * This warning indicates that the TMC chip is too warm.
* It is still working but some parameters may be inferior. * It is still working but some parameters may be inferior.
* You should do something against it. * You should do something against it.
*/ */
#define TMC26X_OVERTEMPERATURE_PREWARING 1 #define TMC26X_OVERTEMPERATURE_PREWARING 1
//! return value for TMC26XStepper.getOverTemperature() if there is a overtemperature shutdown in the TMC chip //! return value for TMC26XStepper.getOverTemperature() if there is a overtemperature shutdown in the TMC chip
/*! /*!
* This warning indicates that the TCM chip is too warm to operate and has shut down to prevent damage. * This warning indicates that the TMC chip is too warm to operate and has shut down to prevent damage.
* It will stop working until it cools down again. * It will stop working until it cools down again.
* If you encouter this situation you must do something against it. Like reducing the current or improving the PCB layout * If you encouter this situation you must do something against it. Like reducing the current or improving the PCB layout
* and/or heat management. * and/or heat management.
@ -115,7 +115,7 @@ class TMC26XStepper {
* *
* Keep in mind that you must also call TMC26XStepper.start() in order to configure the stepper driver for use. * Keep in mind that you must also call TMC26XStepper.start() in order to configure the stepper driver for use.
* *
* By default the Constant Off Time chopper is used, see TCM262Stepper.setConstantOffTimeChopper() for details. * By default the Constant Off Time chopper is used, see TMC26XStepper.setConstantOffTimeChopper() for details.
* This should work on most motors (YMMV). You may want to configure and use the Spread Cycle Chopper, see setSpreadCycleChopper(). * This should work on most motors (YMMV). You may want to configure and use the Spread Cycle Chopper, see setSpreadCycleChopper().
* *
* By default a microstepping of 1/32th is used to provide a smooth motor run, while still giving a good progression per step. * By default a microstepping of 1/32th is used to provide a smooth motor run, while still giving a good progression per step.

Write Preview
Loading…
Cancel
Save