Sergey
3 years ago
47 changed files with 2169 additions and 569 deletions
File diff suppressed because it is too large
@ -0,0 +1,36 @@ |
|||||
|
/**
|
||||
|
* Marlin 3D Printer Firmware |
||||
|
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
|
* |
||||
|
* Based on Sprinter and grbl. |
||||
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
||||
|
* |
||||
|
* This program is free software: you can redistribute it and/or modify |
||||
|
* it under the terms of the GNU General Public License as published by |
||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||
|
* (at your option) any later version. |
||||
|
* |
||||
|
* This program is distributed in the hope that it will be useful, |
||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
* GNU General Public License for more details. |
||||
|
* |
||||
|
* You should have received a copy of the GNU General Public License |
||||
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
|
* |
||||
|
*/ |
||||
|
#pragma once |
||||
|
|
||||
|
/**
|
||||
|
* Creality v2.4.S1 (STM32F103RE) v101 as found in the Ender 7 board pin assignments |
||||
|
*/ |
||||
|
|
||||
|
#define BOARD_INFO_NAME "Creality v2.4.S1 V101" |
||||
|
#define DEFAULT_MACHINE_NAME "Creality3D" |
||||
|
|
||||
|
//
|
||||
|
// Heaters
|
||||
|
//
|
||||
|
#define HEATER_BED_PIN PA15 // HOT BED
|
||||
|
|
||||
|
#include "pins_CREALITY_V4.h" |
@ -0,0 +1,195 @@ |
|||||
|
/**
|
||||
|
* Marlin 3D Printer Firmware |
||||
|
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
|
* |
||||
|
* Based on Sprinter and grbl. |
||||
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
||||
|
* |
||||
|
* This program is free software: you can redistribute it and/or modify |
||||
|
* it under the terms of the GNU General Public License as published by |
||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||
|
* (at your option) any later version. |
||||
|
* |
||||
|
* This program is distributed in the hope that it will be useful, |
||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
* GNU General Public License for more details. |
||||
|
* |
||||
|
* You should have received a copy of the GNU General Public License |
||||
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
|
* |
||||
|
*/ |
||||
|
#pragma once |
||||
|
|
||||
|
/**
|
||||
|
* Eryone Ery32 mini (STM32F103VET6) board pin assignments |
||||
|
*/ |
||||
|
|
||||
|
#include "env_validate.h" |
||||
|
|
||||
|
#if HOTENDS > 2 || E_STEPPERS > 2 |
||||
|
#error "Eryone Ery32 mini supports up to 2 hotends / E-steppers. Comment out this line to continue." |
||||
|
#endif |
||||
|
|
||||
|
#ifndef BOARD_INFO_NAME |
||||
|
#define BOARD_INFO_NAME "ERYONE Ery32 mini" |
||||
|
#endif |
||||
|
|
||||
|
//#define DISABLE_DEBUG
|
||||
|
#define DISABLE_JTAG |
||||
|
//#define ENABLE_SPI3
|
||||
|
#define FLASH_EEPROM_EMULATION |
||||
|
#define FAN_SOFT_PWM |
||||
|
|
||||
|
#if ENABLED(FLASH_EEPROM_EMULATION) |
||||
|
#define EEPROM_PAGE_SIZE (0x800U) // 2KB
|
||||
|
#define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL) |
||||
|
#define MARLIN_EEPROM_SIZE (EEPROM_PAGE_SIZE) |
||||
|
#endif |
||||
|
|
||||
|
//
|
||||
|
// Servos
|
||||
|
//
|
||||
|
#define SERVO0_PIN PA12 |
||||
|
|
||||
|
//
|
||||
|
// Limit Switches
|
||||
|
//
|
||||
|
#define X_STOP_PIN PD8 |
||||
|
#define Y_STOP_PIN PD15 |
||||
|
#define Z_MIN_PIN PA11 |
||||
|
//#define Z_MAX_PIN PB1
|
||||
|
|
||||
|
//
|
||||
|
// Steppers
|
||||
|
//
|
||||
|
#define X_STEP_PIN PB15 |
||||
|
#define X_DIR_PIN PB14 |
||||
|
#define X_ENABLE_PIN PD10 |
||||
|
|
||||
|
#define Y_STEP_PIN PD14 |
||||
|
#define Y_DIR_PIN PD13 |
||||
|
#define Y_ENABLE_PIN PC6 |
||||
|
|
||||
|
#define Z_STEP_PIN PC8 |
||||
|
#define Z_DIR_PIN PC7 |
||||
|
#define Z_ENABLE_PIN PA8 |
||||
|
|
||||
|
#define E0_STEP_PIN PE13 |
||||
|
#define E0_DIR_PIN PE14 |
||||
|
#define E0_ENABLE_PIN PB13 |
||||
|
|
||||
|
//#define E1_STEP_PIN PD13
|
||||
|
//#define E1_DIR_PIN PD12
|
||||
|
//#define E1_ENABLE_PIN PC6
|
||||
|
|
||||
|
//
|
||||
|
// Heaters 0,1 / Fans / Bed
|
||||
|
//
|
||||
|
#define HEATER_0_PIN PD11 |
||||
|
|
||||
|
#if ENABLED(FET_ORDER_EFB) // Hotend, Fan, Bed
|
||||
|
#define HEATER_BED_PIN PD12 |
||||
|
#elif ENABLED(FET_ORDER_EEF) // Hotend, Hotend, Fan
|
||||
|
#define HEATER_1_PIN PD4 |
||||
|
#elif ENABLED(FET_ORDER_EEB) // Hotend, Hotend, Bed
|
||||
|
#define HEATER_1_PIN PD4 |
||||
|
#define HEATER_BED_PIN PD12 |
||||
|
#elif ENABLED(FET_ORDER_EFF) // Hotend, Fan, Fan
|
||||
|
#define FAN1_PIN PD12 |
||||
|
#elif DISABLED(FET_ORDER_SF) // Not Spindle, Fan (i.e., "EFBF" or "EFBE")
|
||||
|
#define HEATER_BED_PIN PD12 |
||||
|
#if EITHER(HAS_MULTI_HOTEND, HEATERS_PARALLEL) |
||||
|
#define HEATER_1_PIN PB9 |
||||
|
#else |
||||
|
#define FAN1_PIN PB9 |
||||
|
#endif |
||||
|
#endif |
||||
|
|
||||
|
#ifndef FAN_PIN |
||||
|
#if EITHER(FET_ORDER_EFB, FET_ORDER_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan
|
||||
|
#define FAN_PIN PB5 |
||||
|
#elif EITHER(FET_ORDER_EEF, FET_ORDER_SF) // Hotend, Hotend, Fan or Spindle, Fan
|
||||
|
#define FAN_PIN PD12 |
||||
|
#elif ENABLED(FET_ORDER_EEB) // Hotend, Hotend, Bed
|
||||
|
#define FAN_PIN -1 // IO pin. Buffer needed
|
||||
|
#else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE")
|
||||
|
#define FAN_PIN PB5 |
||||
|
#endif |
||||
|
#endif |
||||
|
|
||||
|
//
|
||||
|
// Misc. Functions
|
||||
|
//
|
||||
|
//#define PS_ON_PIN PB9
|
||||
|
|
||||
|
#if HAS_TMC_UART |
||||
|
/**
|
||||
|
* TMC2208/TMC2209 stepper drivers |
||||
|
* |
||||
|
* Hardware serial communication ports. |
||||
|
* If undefined software serial is used according to the pins below |
||||
|
*/ |
||||
|
#define X_HARDWARE_SERIAL MSerial4 |
||||
|
#define Y_HARDWARE_SERIAL MSerial4 |
||||
|
#define Z_HARDWARE_SERIAL MSerial4 |
||||
|
#define E0_HARDWARE_SERIAL MSerial4 |
||||
|
#ifndef X_SLAVE_ADDRESS |
||||
|
#define X_SLAVE_ADDRESS 2 |
||||
|
#endif |
||||
|
#ifndef Y_SLAVE_ADDRESS |
||||
|
#define Y_SLAVE_ADDRESS 3 |
||||
|
#endif |
||||
|
#ifndef Z_SLAVE_ADDRESS |
||||
|
#define Z_SLAVE_ADDRESS 1 |
||||
|
#endif |
||||
|
#ifndef E0_SLAVE_ADDRESS |
||||
|
#define E0_SLAVE_ADDRESS 0 |
||||
|
#endif |
||||
|
#endif |
||||
|
//
|
||||
|
// Temperature Sensors
|
||||
|
//
|
||||
|
#define TEMP_BED_PIN PC2 //TB
|
||||
|
#define TEMP_0_PIN PC1 //TH1
|
||||
|
//#define TEMP_1_PIN PC3 //TH2
|
||||
|
#define TEMP_BOARD_PIN PC3 |
||||
|
#ifndef TEMP_SENSOR_BOARD |
||||
|
#define TEMP_SENSOR_BOARD 13 |
||||
|
#endif |
||||
|
#define FIL_RUNOUT_PIN PA10 // MT_DET
|
||||
|
|
||||
|
//
|
||||
|
// LCD Pins
|
||||
|
//
|
||||
|
#if HAS_WIRED_LCD |
||||
|
#define BEEPER_PIN PE12 |
||||
|
#define BTN_ENC PE11 |
||||
|
#define LCD_PINS_ENABLE PE10 |
||||
|
#define LCD_PINS_RS PE9 |
||||
|
#define BTN_EN1 PE4 |
||||
|
#define BTN_EN2 PE3 |
||||
|
#define LCD_PINS_D4 PE8 |
||||
|
#define LCD_PINS_D5 PE7 |
||||
|
#define LCD_PINS_D6 PB2 |
||||
|
#define LCD_PINS_D7 PB1 |
||||
|
|
||||
|
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) |
||||
|
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
|
||||
|
#endif |
||||
|
|
||||
|
#define BOARD_ST7920_DELAY_1 50 |
||||
|
#define BOARD_ST7920_DELAY_2 50 |
||||
|
#define BOARD_ST7920_DELAY_3 50 |
||||
|
|
||||
|
#endif // HAS_WIRED_LCD
|
||||
|
|
||||
|
//
|
||||
|
// SD Card
|
||||
|
//
|
||||
|
#define ENABLE_SPI1 |
||||
|
#define SD_DETECT_PIN PA4 |
||||
|
#define SCK_PIN PA5 |
||||
|
#define MISO_PIN PA6 |
||||
|
#define MOSI_PIN PA7 |
||||
|
#define SS_PIN PC4 |
@ -0,0 +1,39 @@ |
|||||
|
/**
|
||||
|
* Marlin 3D Printer Firmware |
||||
|
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
|
* |
||||
|
* Based on Sprinter and grbl. |
||||
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
||||
|
* |
||||
|
* This program is free software: you can redistribute it and/or modify |
||||
|
* it under the terms of the GNU General Public License as published by |
||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||
|
* (at your option) any later version. |
||||
|
* |
||||
|
* This program is distributed in the hope that it will be useful, |
||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
* GNU General Public License for more details. |
||||
|
* |
||||
|
* You should have received a copy of the GNU General Public License |
||||
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
|
* |
||||
|
*/ |
||||
|
#pragma once |
||||
|
|
||||
|
#define BOARD_INFO_NAME "BTT OCTOPUS PRO V1.0" |
||||
|
|
||||
|
//
|
||||
|
// Temperature Sensors
|
||||
|
//
|
||||
|
#if TEMP_SENSOR_0 == -5 |
||||
|
#define TEMP_0_CS_PIN PF8 // Max31865 CS
|
||||
|
#define TEMP_0_SCK_PIN PA5 |
||||
|
#define TEMP_0_MISO_PIN PA6 |
||||
|
#define TEMP_0_MOSI_PIN PA7 |
||||
|
#define SOFTWARE_SPI // Max31865 and LCD SD share a set of SPIs, Set SD to softwareSPI for Max31865
|
||||
|
#else |
||||
|
#define TEMP_0_PIN PF4 // TH0
|
||||
|
#endif |
||||
|
|
||||
|
#include "pins_BTT_OCTOPUS_V1_common.h" |
@ -0,0 +1,50 @@ |
|||||
|
{ |
||||
|
"build": { |
||||
|
"cpu": "cortex-m4", |
||||
|
"extra_flags": "-DSTM32F4 -DSTM32F429xx", |
||||
|
"f_cpu": "168000000L", |
||||
|
"mcu": "stm32f429zgt6", |
||||
|
"product_line": "STM32F429xx", |
||||
|
"variant": "MARLIN_BIGTREE_OCTOPUS_PRO_V1_F429" |
||||
|
}, |
||||
|
"connectivity": [ |
||||
|
"can" |
||||
|
], |
||||
|
"debug": { |
||||
|
"default_tools": [ |
||||
|
"stlink" |
||||
|
], |
||||
|
"jlink_device": "STM32F429ZG", |
||||
|
"onboard_tools": [ |
||||
|
"stlink" |
||||
|
], |
||||
|
"openocd_board": "stm32f429", |
||||
|
"openocd_target": "stm32f4x", |
||||
|
"svd_path": "STM32F429x.svd" |
||||
|
}, |
||||
|
"frameworks": [ |
||||
|
"arduino", |
||||
|
"cmsis", |
||||
|
"mbed", |
||||
|
"stm32cube", |
||||
|
"libopencm3", |
||||
|
"zephyr" |
||||
|
], |
||||
|
"name": "STM32F429ZG (128k RAM, 64k CCM RAM, 1024k Flash", |
||||
|
"upload": { |
||||
|
"disable_flushing": false, |
||||
|
"maximum_ram_size": 131072, |
||||
|
"maximum_size": 1048576, |
||||
|
"protocol": "stlink", |
||||
|
"protocols": [ |
||||
|
"stlink", |
||||
|
"dfu", |
||||
|
"jlink" |
||||
|
], |
||||
|
"require_upload_port": true, |
||||
|
"use_1200bps_touch": false, |
||||
|
"wait_for_upload_port": false |
||||
|
}, |
||||
|
"url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f429-439.html", |
||||
|
"vendor": "ST" |
||||
|
} |
@ -0,0 +1,14 @@ |
|||||
|
MEMORY |
||||
|
{ |
||||
|
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K - 4K |
||||
|
rom (rx) : ORIGIN = 0x08004000, LENGTH = 512K - 16K |
||||
|
} |
||||
|
|
||||
|
/* Provide memory region aliases for common.inc */ |
||||
|
REGION_ALIAS("REGION_TEXT", rom); |
||||
|
REGION_ALIAS("REGION_DATA", ram); |
||||
|
REGION_ALIAS("REGION_BSS", ram); |
||||
|
REGION_ALIAS("REGION_RODATA", rom); |
||||
|
|
||||
|
/* Let common.inc handle the real work. */ |
||||
|
INCLUDE common.inc |
@ -0,0 +1,433 @@ |
|||||
|
/*
|
||||
|
******************************************************************************* |
||||
|
* Copyright (c) 2016, STMicroelectronics |
||||
|
* All rights reserved. |
||||
|
* |
||||
|
* Redistribution and use in source and binary forms, with or without |
||||
|
* modification, are permitted provided that the following conditions are met: |
||||
|
* |
||||
|
* 1. Redistributions of source code must retain the above copyright notice, |
||||
|
* this list of conditions and the following disclaimer. |
||||
|
* 2. Redistributions in binary form must reproduce the above copyright notice, |
||||
|
* this list of conditions and the following disclaimer in the documentation |
||||
|
* and/or other materials provided with the distribution. |
||||
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors |
||||
|
* may be used to endorse or promote products derived from this software |
||||
|
* without specific prior written permission. |
||||
|
* |
||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
||||
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
||||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
||||
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
||||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
||||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
||||
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
||||
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
||||
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
||||
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
||||
|
******************************************************************************* |
||||
|
*/ |
||||
|
#include "Arduino.h" |
||||
|
#include "PeripheralPins.h" |
||||
|
|
||||
|
// =====
|
||||
|
// Note: Commented lines are alternative possibilities which are not used per default.
|
||||
|
// If you change them, you will have to know what you do
|
||||
|
// =====
|
||||
|
|
||||
|
|
||||
|
//*** ADC ***
|
||||
|
|
||||
|
#ifdef HAL_ADC_MODULE_ENABLED |
||||
|
const PinMap PinMap_ADC[] = { |
||||
|
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
|
||||
|
{PA_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4
|
||||
|
{PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
|
||||
|
{PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
|
||||
|
{PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
|
||||
|
{PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
|
||||
|
{PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
|
||||
|
{PF_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC3_IN9 TH_0
|
||||
|
{PF_4, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC3_IN14 TH_1
|
||||
|
{PF_5, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC3_IN15 TH_2
|
||||
|
{PF_6, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_IN4 TH_3
|
||||
|
{PF_7, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5 EXP_13
|
||||
|
{PF_8, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC3_IN6 PT100
|
||||
|
{NC, NP, 0} |
||||
|
|
||||
|
// {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
|
||||
|
// {PA_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC2_IN0
|
||||
|
// {PA_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC3_IN0
|
||||
|
// {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
|
||||
|
// {PA_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1
|
||||
|
// {PA_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC3_IN1
|
||||
|
// {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
|
||||
|
// {PA_2, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_IN2
|
||||
|
// {PA_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC3_IN2
|
||||
|
// {PA_3, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3
|
||||
|
// {PA_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC3_IN3
|
||||
|
//{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
|
||||
|
// {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
|
||||
|
// {PA_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_IN5
|
||||
|
// {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
|
||||
|
// {PA_6, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC2_IN6
|
||||
|
// {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
|
||||
|
// {PA_7, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC2_IN7
|
||||
|
// {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
|
||||
|
// {PB_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC2_IN8
|
||||
|
// {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
|
||||
|
// {PB_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC2_IN9
|
||||
|
// {PC_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC2_IN10
|
||||
|
// {PC_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC3_IN10
|
||||
|
// {PC_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC2_IN11
|
||||
|
// {PC_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC3_IN11
|
||||
|
// {PC_2, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC2_IN12
|
||||
|
// {PC_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC3_IN12
|
||||
|
// {PC_3, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC2_IN13
|
||||
|
// {PC_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC3_IN13
|
||||
|
// {PC_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC2_IN14
|
||||
|
// {PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
|
||||
|
// {PC_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC2_IN15
|
||||
|
|
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
//*** DAC ***
|
||||
|
|
||||
|
#ifdef HAL_DAC_MODULE_ENABLED |
||||
|
const PinMap PinMap_DAC[] = { |
||||
|
// {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1
|
||||
|
// {PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2 - LD2
|
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
//*** I2C ***
|
||||
|
|
||||
|
#ifdef HAL_I2C_MODULE_ENABLED |
||||
|
const PinMap PinMap_I2C_SDA[] = { |
||||
|
// {PB_3, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
||||
|
// {PB_4, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||
|
// {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
|
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, |
||||
|
// {PC_7, FMPI2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)},
|
||||
|
// {PC_9, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||
|
// {PC_12, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
#ifdef HAL_I2C_MODULE_ENABLED |
||||
|
const PinMap PinMap_I2C_SCL[] = { |
||||
|
// {PA_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||
|
// {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
|
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, |
||||
|
// {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
||||
|
// {PC_6, FMPI2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_FMPI2C1)},
|
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
//*** PWM ***
|
||||
|
|
||||
|
#ifdef HAL_TIM_MODULE_ENABLED |
||||
|
const PinMap PinMap_PWM[] = { |
||||
|
{PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2 BED
|
||||
|
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 HEATER0
|
||||
|
{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 HEATER1
|
||||
|
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 HEATER2
|
||||
|
{PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 HEATER3
|
||||
|
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1 FAN0
|
||||
|
{PE_5, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 FAN1
|
||||
|
{PD_12, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 FAN2
|
||||
|
{PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 FAN3
|
||||
|
{PD_14, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 FAN4
|
||||
|
{PD_15, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 FAN5
|
||||
|
|
||||
|
/**
|
||||
|
* Unused by specifications on Octopus. |
||||
|
* Uncomment the corresponding line if you want to have HardwarePWM on some pins. |
||||
|
* WARNING: check timers' usage first to avoid conflicts. |
||||
|
* If you don't know what you're doing leave things as they are or you WILL break something (including hardware) |
||||
|
* If you alter this section DO NOT report bugs to Marlin team since they are most likely caused by you. Thank you. |
||||
|
*/ |
||||
|
//{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
|
//{PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
|
||||
|
//{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 BLTOUCH is a "servo"
|
||||
|
//{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 BLTOUCH is a "servo"
|
||||
|
//{PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
|
||||
|
//{PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
|
||||
|
//{PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
|
||||
|
//{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
|
||||
|
//{PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
|
||||
|
//{PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
|
||||
|
//{PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
|
//{PA_5, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
|
||||
|
//{PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
|
//{PA_6, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
|
||||
|
//{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
|
//{PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
|
//{PA_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
|
||||
|
//{PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1
|
||||
|
//{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
|
||||
|
//{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
|
||||
|
//{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
|
||||
|
//{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
|
||||
|
//{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
|
//{PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
|
//{PB_0, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
|
||||
|
//{PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
|
//{PB_1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
|
||||
|
//{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||
|
//{PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
|
//{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
|
//{PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
|
||||
|
//{PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
|
||||
|
//{PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
|
||||
|
//{PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
||||
|
//{PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
|
||||
|
//{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
||||
|
//{PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
|
||||
|
//{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
|
//{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
|
//{PB_14, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
|
||||
|
//{PB_14, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1
|
||||
|
//{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
|
//{PB_15, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
|
||||
|
//{PB_15, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 2, 0)}, // TIM12_CH2
|
||||
|
//{PC_6, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1
|
||||
|
//{PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
|
//{PC_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2
|
||||
|
//{PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
||||
|
//{PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||
|
//{PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
|
||||
|
//{PD_15, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
||||
|
//{PE_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
|
//{PE_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
|
||||
|
//{PE_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
|
//{PE_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
|
||||
|
//{PE_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
|
//{PE_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
|
||||
|
//{PE_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
|
||||
|
//144 pins mcu, 114 gpio
|
||||
|
//{PF_6, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
|
||||
|
//{PF_7, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
|
||||
|
//{PF_8, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
|
||||
|
//{PF_9, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1
|
||||
|
|
||||
|
//176 pins mcu, 140 gpio
|
||||
|
//{PH_10, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
|
||||
|
//{PH_6, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1
|
||||
|
//{PH_11, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
|
||||
|
//{PI_5, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1
|
||||
|
//{PI_6, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2
|
||||
|
|
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
//*** SERIAL ***
|
||||
|
|
||||
|
#ifdef HAL_UART_MODULE_ENABLED |
||||
|
const PinMap PinMap_UART_TX[] = { |
||||
|
// {PA_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
|
// {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
|
{PD_5, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, |
||||
|
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, |
||||
|
{PD_8, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, |
||||
|
// {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
|
// {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
|
// {PC_6, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
|
// {PC_10, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
|
//{PC_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
|
// {PC_12, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
|
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
#ifdef HAL_UART_MODULE_ENABLED |
||||
|
const PinMap PinMap_UART_RX[] = { |
||||
|
// {PA_1, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
|
// {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
|
{PD_6, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, |
||||
|
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, |
||||
|
{PD_9, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, |
||||
|
// {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
|
// {PC_5, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
|
// {PC_7, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
|
// {PC_11, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
|
//{PC_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
|
// {PD_2, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
|
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
#ifdef HAL_UART_MODULE_ENABLED |
||||
|
const PinMap PinMap_UART_RTS[] = { |
||||
|
// {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
|
// {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
|
// {PA_15, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
|
// {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
|
// {PC_8, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART5)},
|
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
#ifdef HAL_UART_MODULE_ENABLED |
||||
|
const PinMap PinMap_UART_CTS[] = { |
||||
|
// {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
|
// {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
|
// {PB_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
|
// {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
|
// {PC_9, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART5)},
|
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
//*** SPI ***
|
||||
|
|
||||
|
#ifdef HAL_SPI_MODULE_ENABLED |
||||
|
const PinMap PinMap_SPI_MOSI[] = { |
||||
|
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, |
||||
|
// {PB_0, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI3)},
|
||||
|
// {PB_2, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI3)},
|
||||
|
// {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
|
// {PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
|
// {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
|
// {PC_1, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI2)},
|
||||
|
// {PC_1, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI3)},
|
||||
|
// {PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
|
// {PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
#ifdef HAL_SPI_MODULE_ENABLED |
||||
|
const PinMap PinMap_SPI_MISO[] = { |
||||
|
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, |
||||
|
// {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
|
// {PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
|
// {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
|
// {PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
|
// {PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
#ifdef HAL_SPI_MODULE_ENABLED |
||||
|
const PinMap PinMap_SPI_SCLK[] = { |
||||
|
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, |
||||
|
// {PA_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
|
// {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
|
// {PB_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
|
// {PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
|
// {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
|
// {PC_7, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
|
// {PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
#ifdef HAL_SPI_MODULE_ENABLED |
||||
|
const PinMap PinMap_SPI_SSEL[] = { |
||||
|
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, |
||||
|
// {PA_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
|
// {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
|
// {PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
|
// {PB_4, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI2)},
|
||||
|
// {PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
|
// {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
//*** CAN ***
|
||||
|
|
||||
|
#ifdef HAL_CAN_MODULE_ENABLED |
||||
|
const PinMap PinMap_CAN_RD[] = { |
||||
|
// {PA_11, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||
|
// {PB_5, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
|
||||
|
// {PB_8, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||
|
// {PB_12, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
|
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
#ifdef HAL_CAN_MODULE_ENABLED |
||||
|
const PinMap PinMap_CAN_TD[] = { |
||||
|
// {PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||
|
// {PB_6, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
|
||||
|
// {PB_9, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||
|
// {PB_13, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
|
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
//*** ETHERNET ***
|
||||
|
|
||||
|
//*** No Ethernet ***
|
||||
|
|
||||
|
//*** QUADSPI ***
|
||||
|
|
||||
|
#ifdef HAL_QSPI_MODULE_ENABLED |
||||
|
const PinMap PinMap_QUADSPI[] = { |
||||
|
// {PA_1, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QSPI)}, // QUADSPI_BK1_IO3
|
||||
|
// {PB_2, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QSPI)}, // QUADSPI_CLK
|
||||
|
// {PB_6, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QSPI)}, // QUADSPI_BK1_NCS
|
||||
|
// {PC_9, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QSPI)}, // QUADSPI_BK1_IO0
|
||||
|
// {PC_10, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QSPI)}, // QUADSPI_BK1_IO1
|
||||
|
// {PC_11, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QSPI)}, // QUADSPI_BK2_NCS
|
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
|
||||
|
//*** USB ***
|
||||
|
|
||||
|
#ifdef HAL_PCD_MODULE_ENABLED |
||||
|
const PinMap PinMap_USB_OTG_FS[] = { |
||||
|
// {PA_8, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF
|
||||
|
// {PA_9, USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0)}, // USB_OTG_FS_VBUS
|
||||
|
// {PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID
|
||||
|
{PA_11, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DM
|
||||
|
{PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DP
|
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
|
||||
|
const PinMap PinMap_USB_OTG_HS[] = { |
||||
|
//{PB_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_ID
|
||||
|
//{PB_13, USB_OTG_HS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_HS_VBUS
|
||||
|
{PB_14, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_DM
|
||||
|
{PB_15, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_DP
|
||||
|
|
||||
|
/*#error "USB in HS mode isn't supported by the board"
|
||||
|
{PA_3, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D0
|
||||
|
{PB_0, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D1
|
||||
|
{PB_1, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D2
|
||||
|
{PB_5, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D7
|
||||
|
{PB_10, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D3
|
||||
|
{PB_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D5
|
||||
|
{PB_13, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D6
|
||||
|
{PC_0, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_STP
|
||||
|
{PC_2, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_DIR
|
||||
|
{PC_3, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_NXT
|
||||
|
*/ |
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
|
||||
|
|
||||
|
#ifdef HAL_SD_MODULE_ENABLED |
||||
|
WEAK const PinMap PinMap_SD[] = { |
||||
|
// {PB_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D4
|
||||
|
// {PB_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D5
|
||||
|
// {PC_6, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D6
|
||||
|
// {PC_7, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D7
|
||||
|
{PC_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D0
|
||||
|
{PC_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D1
|
||||
|
{PC_10, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D2
|
||||
|
{PC_11, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D3
|
||||
|
{PC_12, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CK
|
||||
|
{PD_2, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CMD
|
||||
|
{NC, NP, 0} |
||||
|
}; |
||||
|
#endif |
||||
|
#endif |
@ -0,0 +1,30 @@ |
|||||
|
/* SYS_WKUP */ |
||||
|
#ifdef PWR_WAKEUP_PIN1 |
||||
|
SYS_WKUP1 = PA_0, /* SYS_WKUP0 */ |
||||
|
#endif |
||||
|
#ifdef PWR_WAKEUP_PIN2 |
||||
|
SYS_WKUP2 = NC, |
||||
|
#endif |
||||
|
#ifdef PWR_WAKEUP_PIN3 |
||||
|
SYS_WKUP3 = NC, |
||||
|
#endif |
||||
|
#ifdef PWR_WAKEUP_PIN4 |
||||
|
SYS_WKUP4 = NC, |
||||
|
#endif |
||||
|
#ifdef PWR_WAKEUP_PIN5 |
||||
|
SYS_WKUP5 = NC, |
||||
|
#endif |
||||
|
#ifdef PWR_WAKEUP_PIN6 |
||||
|
SYS_WKUP6 = NC, |
||||
|
#endif |
||||
|
#ifdef PWR_WAKEUP_PIN7 |
||||
|
SYS_WKUP7 = NC, |
||||
|
#endif |
||||
|
#ifdef PWR_WAKEUP_PIN8 |
||||
|
SYS_WKUP8 = NC, |
||||
|
#endif |
||||
|
/* USB */ |
||||
|
#ifdef USBCON |
||||
|
USB_OTG_FS_DM = PA_11, |
||||
|
USB_OTG_FS_DP = PA_12, |
||||
|
#endif |
@ -0,0 +1,53 @@ |
|||||
|
#pragma once |
||||
|
|
||||
|
#define HAL_MODULE_ENABLED |
||||
|
#define HAL_ADC_MODULE_ENABLED |
||||
|
#define HAL_CRC_MODULE_ENABLED |
||||
|
#define HAL_DMA_MODULE_ENABLED |
||||
|
#define HAL_EXTI_MODULE_ENABLED // Needed for Endstop (and other external) Interrupts
|
||||
|
#define HAL_GPIO_MODULE_ENABLED |
||||
|
#define HAL_I2C_MODULE_ENABLED |
||||
|
#define HAL_PWR_MODULE_ENABLED |
||||
|
#define HAL_RCC_MODULE_ENABLED |
||||
|
//#define HAL_RTC_MODULE_ENABLED // Real Time Clock...do we use it?
|
||||
|
#define HAL_SPI_MODULE_ENABLED |
||||
|
#define HAL_TIM_MODULE_ENABLED |
||||
|
#define HAL_USART_MODULE_ENABLED |
||||
|
#define HAL_CORTEX_MODULE_ENABLED |
||||
|
//#define HAL_UART_MODULE_ENABLED // by default
|
||||
|
//#define HAL_PCD_MODULE_ENABLED // Since STM32 v3.10700.191028 this is automatically added if any type of USB is enabled (as in Arduino IDE)
|
||||
|
#define HAL_SD_MODULE_ENABLED |
||||
|
|
||||
|
//#undef HAL_SD_MODULE_ENABLED
|
||||
|
#undef HAL_DAC_MODULE_ENABLED |
||||
|
#undef HAL_FLASH_MODULE_ENABLED |
||||
|
#undef HAL_CAN_MODULE_ENABLED |
||||
|
#undef HAL_CAN_LEGACY_MODULE_ENABLED |
||||
|
#undef HAL_CEC_MODULE_ENABLED |
||||
|
#undef HAL_CRYP_MODULE_ENABLED |
||||
|
#undef HAL_DCMI_MODULE_ENABLED |
||||
|
#undef HAL_DMA2D_MODULE_ENABLED |
||||
|
#undef HAL_ETH_MODULE_ENABLED |
||||
|
#undef HAL_NAND_MODULE_ENABLED |
||||
|
#undef HAL_NOR_MODULE_ENABLED |
||||
|
#undef HAL_PCCARD_MODULE_ENABLED |
||||
|
#undef HAL_SRAM_MODULE_ENABLED |
||||
|
#undef HAL_SDRAM_MODULE_ENABLED |
||||
|
#undef HAL_HASH_MODULE_ENABLED |
||||
|
#undef HAL_SMBUS_MODULE_ENABLED |
||||
|
#undef HAL_I2S_MODULE_ENABLED |
||||
|
#undef HAL_IWDG_MODULE_ENABLED |
||||
|
#undef HAL_LTDC_MODULE_ENABLED |
||||
|
#undef HAL_DSI_MODULE_ENABLED |
||||
|
#undef HAL_QSPI_MODULE_ENABLED |
||||
|
#undef HAL_RNG_MODULE_ENABLED |
||||
|
#undef HAL_SAI_MODULE_ENABLED |
||||
|
#undef HAL_IRDA_MODULE_ENABLED |
||||
|
#undef HAL_SMARTCARD_MODULE_ENABLED |
||||
|
#undef HAL_WWDG_MODULE_ENABLED |
||||
|
//#undef HAL_HCD_MODULE_ENABLED
|
||||
|
#undef HAL_FMPI2C_MODULE_ENABLED |
||||
|
#undef HAL_SPDIFRX_MODULE_ENABLED |
||||
|
#undef HAL_DFSDM_MODULE_ENABLED |
||||
|
#undef HAL_LPTIM_MODULE_ENABLED |
||||
|
#undef HAL_MMC_MODULE_ENABLED |
@ -0,0 +1,209 @@ |
|||||
|
/* |
||||
|
***************************************************************************** |
||||
|
** |
||||
|
|
||||
|
** File : LinkerScript.ld |
||||
|
** |
||||
|
** Abstract : Linker script for STM32F429VGTx Device with |
||||
|
** 2048KByte FLASH, 192KByte RAM |
||||
|
** |
||||
|
** Set heap size, stack size and stack location according |
||||
|
** to application requirements. |
||||
|
** |
||||
|
** Set memory bank area and size if external memory is used. |
||||
|
** |
||||
|
** Target : STMicroelectronics STM32 |
||||
|
** |
||||
|
** |
||||
|
** Distribution: The file is distributed as is, without any warranty |
||||
|
** of any kind. |
||||
|
** |
||||
|
***************************************************************************** |
||||
|
** @attention |
||||
|
** |
||||
|
** <h2><center>© COPYRIGHT(c) 2014 Ac6</center></h2> |
||||
|
** |
||||
|
** Redistribution and use in source and binary forms, with or without modification, |
||||
|
** are permitted provided that the following conditions are met: |
||||
|
** 1. Redistributions of source code must retain the above copyright notice, |
||||
|
** this list of conditions and the following disclaimer. |
||||
|
** 2. Redistributions in binary form must reproduce the above copyright notice, |
||||
|
** this list of conditions and the following disclaimer in the documentation |
||||
|
** and/or other materials provided with the distribution. |
||||
|
** 3. Neither the name of Ac6 nor the names of its contributors |
||||
|
** may be used to endorse or promote products derived from this software |
||||
|
** without specific prior written permission. |
||||
|
** |
||||
|
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
||||
|
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
||||
|
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
||||
|
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
||||
|
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
||||
|
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
||||
|
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
||||
|
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
||||
|
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
||||
|
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
||||
|
** |
||||
|
***************************************************************************** |
||||
|
*/ |
||||
|
|
||||
|
/* Entry Point */ |
||||
|
ENTRY(Reset_Handler) |
||||
|
|
||||
|
/* Highest address of the user mode stack */ |
||||
|
_estack = 0x20000000 + LD_MAX_DATA_SIZE; /* end of RAM */ |
||||
|
/* Generate a link error if heap and stack don't fit into RAM */ |
||||
|
_Min_Heap_Size = 0x200; /* required amount of heap */ |
||||
|
_Min_Stack_Size = 0x400; /* required amount of stack */ |
||||
|
|
||||
|
/* Specify the memory areas */ |
||||
|
MEMORY |
||||
|
{ |
||||
|
FLASH (rx) : ORIGIN = 0x08000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET |
||||
|
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE |
||||
|
CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 64K |
||||
|
MEMORY_ARRAY (rw) : ORIGIN = 0x10000000, LENGTH = 0x144 |
||||
|
} |
||||
|
|
||||
|
/* Define output sections */ |
||||
|
SECTIONS |
||||
|
{ |
||||
|
/* The startup code goes first into FLASH */ |
||||
|
.isr_vector : |
||||
|
{ |
||||
|
. = ALIGN(4); |
||||
|
KEEP(*(.isr_vector)) /* Startup code */ |
||||
|
. = ALIGN(4); |
||||
|
} >FLASH |
||||
|
|
||||
|
/* The program code and other data goes into FLASH */ |
||||
|
.text ALIGN(4): |
||||
|
{ |
||||
|
. = ALIGN(4); |
||||
|
*(.text) /* .text sections (code) */ |
||||
|
*(.text*) /* .text* sections (code) */ |
||||
|
*(.glue_7) /* glue arm to thumb code */ |
||||
|
*(.glue_7t) /* glue thumb to arm code */ |
||||
|
*(.eh_frame) |
||||
|
|
||||
|
KEEP (*(.init)) |
||||
|
KEEP (*(.fini)) |
||||
|
|
||||
|
. = ALIGN(4); |
||||
|
_etext = .; /* define a global symbols at end of code */ |
||||
|
} >FLASH |
||||
|
|
||||
|
/* Constant data goes into FLASH */ |
||||
|
.rodata ALIGN(4) : |
||||
|
{ |
||||
|
. = ALIGN(4); |
||||
|
*(.rodata) /* .rodata sections (constants, strings, etc.) */ |
||||
|
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */ |
||||
|
. = ALIGN(4); |
||||
|
} >FLASH |
||||
|
|
||||
|
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH |
||||
|
.ARM : { |
||||
|
__exidx_start = .; |
||||
|
*(.ARM.exidx*) |
||||
|
__exidx_end = .; |
||||
|
} >FLASH |
||||
|
|
||||
|
.preinit_array : |
||||
|
{ |
||||
|
PROVIDE_HIDDEN (__preinit_array_start = .); |
||||
|
KEEP (*(.preinit_array*)) |
||||
|
PROVIDE_HIDDEN (__preinit_array_end = .); |
||||
|
} >FLASH |
||||
|
.init_array : |
||||
|
{ |
||||
|
PROVIDE_HIDDEN (__init_array_start = .); |
||||
|
KEEP (*(SORT(.init_array.*))) |
||||
|
KEEP (*(.init_array*)) |
||||
|
PROVIDE_HIDDEN (__init_array_end = .); |
||||
|
} >FLASH |
||||
|
.fini_array : |
||||
|
{ |
||||
|
PROVIDE_HIDDEN (__fini_array_start = .); |
||||
|
KEEP (*(SORT(.fini_array.*))) |
||||
|
KEEP (*(.fini_array*)) |
||||
|
PROVIDE_HIDDEN (__fini_array_end = .); |
||||
|
} >FLASH |
||||
|
|
||||
|
/* used by the startup to initialize data */ |
||||
|
_sidata = LOADADDR(.data); |
||||
|
|
||||
|
/* Initialized data sections goes into RAM, load LMA copy after code */ |
||||
|
.data : |
||||
|
{ |
||||
|
. = ALIGN(4); |
||||
|
_sdata = .; /* create a global symbol at data start */ |
||||
|
*(.data) /* .data sections */ |
||||
|
*(.data*) /* .data* sections */ |
||||
|
|
||||
|
. = ALIGN(4); |
||||
|
_edata = .; /* define a global symbol at data end */ |
||||
|
} >RAM AT> FLASH |
||||
|
|
||||
|
|
||||
|
_siccmram = LOADADDR(.ccmram); |
||||
|
|
||||
|
/* CCM-RAM section |
||||
|
* |
||||
|
* IMPORTANT NOTE! |
||||
|
* If initialized variables will be placed in this section, |
||||
|
* the startup code needs to be modified to copy the init-values. |
||||
|
*/ |
||||
|
.ccmram : |
||||
|
{ |
||||
|
. = ALIGN(4); |
||||
|
_sccmram = .; /* create a global symbol at ccmram start */ |
||||
|
*(.ccmram) |
||||
|
*(.ccmram*) |
||||
|
|
||||
|
. = ALIGN(4); |
||||
|
_eccmram = .; /* create a global symbol at ccmram end */ |
||||
|
} >CCMRAM AT> FLASH |
||||
|
|
||||
|
|
||||
|
/* Uninitialized data section */ |
||||
|
. = ALIGN(4); |
||||
|
.bss : |
||||
|
{ |
||||
|
/* This is used by the startup in order to initialize the .bss secion */ |
||||
|
_sbss = .; /* define a global symbol at bss start */ |
||||
|
__bss_start__ = _sbss; |
||||
|
*(.bss) |
||||
|
*(.bss*) |
||||
|
*(COMMON) |
||||
|
|
||||
|
. = ALIGN(4); |
||||
|
_ebss = .; /* define a global symbol at bss end */ |
||||
|
__bss_end__ = _ebss; |
||||
|
} >RAM |
||||
|
|
||||
|
/* User_heap_stack section, used to check that there is enough RAM left */ |
||||
|
._user_heap_stack : |
||||
|
{ |
||||
|
. = ALIGN(8); |
||||
|
PROVIDE ( end = . ); |
||||
|
PROVIDE ( _end = . ); |
||||
|
. = . + _Min_Heap_Size; |
||||
|
. = . + _Min_Stack_Size; |
||||
|
. = ALIGN(8); |
||||
|
} >RAM |
||||
|
|
||||
|
|
||||
|
|
||||
|
/* Remove information from the standard libraries */ |
||||
|
/DISCARD/ : |
||||
|
{ |
||||
|
libc.a ( * ) |
||||
|
libm.a ( * ) |
||||
|
libgcc.a ( * ) |
||||
|
} |
||||
|
|
||||
|
.ARM.attributes 0 : { *(.ARM.attributes) } |
||||
|
ExtRAMData : {*(.ExtRAMData)} >MEMORY_ARRAY |
||||
|
} |
@ -0,0 +1,233 @@ |
|||||
|
/*
|
||||
|
Copyright (c) 2011 Arduino. All right reserved. |
||||
|
|
||||
|
This library is free software; you can redistribute it and/or |
||||
|
modify it under the terms of the GNU Lesser General Public |
||||
|
License as published by the Free Software Foundation; either |
||||
|
version 2.1 of the License, or (at your option) any later version. |
||||
|
|
||||
|
This library is distributed in the hope that it will be useful, |
||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. |
||||
|
See the GNU Lesser General Public License for more details. |
||||
|
|
||||
|
You should have received a copy of the GNU Lesser General Public |
||||
|
License along with this library; if not, write to the Free Software |
||||
|
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
||||
|
*/ |
||||
|
|
||||
|
#include "pins_arduino.h" |
||||
|
|
||||
|
#ifdef __cplusplus |
||||
|
extern "C" { |
||||
|
#endif |
||||
|
|
||||
|
// Pin number
|
||||
|
const PinName digitalPin[] = { |
||||
|
PA_0, //D0
|
||||
|
PA_1, //D1
|
||||
|
PA_2, //D2
|
||||
|
PA_3, //D3
|
||||
|
PA_4, //D4
|
||||
|
PA_5, //D5
|
||||
|
PA_6, //D6
|
||||
|
PA_7, //D7
|
||||
|
PA_8, //D8
|
||||
|
PA_9, //D9
|
||||
|
PA_10, //D10
|
||||
|
PA_11, //D11
|
||||
|
PA_12, //D12
|
||||
|
PA_13, //D13
|
||||
|
PA_14, //D14
|
||||
|
PA_15, //D15
|
||||
|
PB_0, //D16
|
||||
|
PB_1, //D17
|
||||
|
PB_2, //D18
|
||||
|
PB_3, //D19
|
||||
|
PB_4, //D20
|
||||
|
PB_5, //D21
|
||||
|
PB_6, //D22
|
||||
|
PB_7, //D23
|
||||
|
PB_8, //D24
|
||||
|
PB_9, //D25
|
||||
|
PB_10, //D26
|
||||
|
PB_11, //D27
|
||||
|
PB_12, //D28
|
||||
|
PB_13, //D29
|
||||
|
PB_14, //D30
|
||||
|
PB_15, //D31
|
||||
|
PC_0, //D32
|
||||
|
PC_1, //D33
|
||||
|
PC_2, //D34
|
||||
|
PC_3, //D35
|
||||
|
PC_4, //D36
|
||||
|
PC_5, //D37
|
||||
|
PC_6, //D38
|
||||
|
PC_7, //D39
|
||||
|
PC_8, //D40
|
||||
|
PC_9, //D41
|
||||
|
PC_10, //D42
|
||||
|
PC_11, //D43
|
||||
|
PC_12, //D44
|
||||
|
PC_13, //D45
|
||||
|
PC_14, //D46
|
||||
|
PC_15, //D47
|
||||
|
PD_0, //D48
|
||||
|
PD_1, //D49
|
||||
|
PD_2, //D50
|
||||
|
PD_3, //D51
|
||||
|
PD_4, //D52
|
||||
|
PD_5, //D53
|
||||
|
PD_6, //D54
|
||||
|
PD_7, //D55
|
||||
|
PD_8, //D56
|
||||
|
PD_9, //D57
|
||||
|
PD_10, //D58
|
||||
|
PD_11, //D59
|
||||
|
PD_12, //D60
|
||||
|
PD_13, //D61
|
||||
|
PD_14, //D62
|
||||
|
PD_15, //D63
|
||||
|
PE_0, //D64
|
||||
|
PE_1, //D65
|
||||
|
PE_2, //D66
|
||||
|
PE_3, //D67
|
||||
|
PE_4, //D68
|
||||
|
PE_5, //D69
|
||||
|
PE_6, //D70
|
||||
|
PE_7, //D71
|
||||
|
PE_8, //D72
|
||||
|
PE_9, //D73
|
||||
|
PE_10, //D74
|
||||
|
PE_11, //D75
|
||||
|
PE_12, //D76
|
||||
|
PE_13, //D77
|
||||
|
PE_14, //D78
|
||||
|
PE_15, //D79
|
||||
|
PF_0, //D80
|
||||
|
PF_1, //D81
|
||||
|
PF_2, //D82
|
||||
|
PF_3, //D83
|
||||
|
PF_4, //D84
|
||||
|
PF_5, //D85
|
||||
|
PF_6, //D86
|
||||
|
PF_7, //D87
|
||||
|
PF_8, //D88
|
||||
|
PF_9, //D89
|
||||
|
PF_10, //D90
|
||||
|
PF_11, //D91
|
||||
|
PF_12, //D92
|
||||
|
PF_13, //D93
|
||||
|
PF_14, //D94
|
||||
|
PF_15, //D95
|
||||
|
PG_0, //D96
|
||||
|
PG_1, //D97
|
||||
|
PG_2, //D98
|
||||
|
PG_3, //D99
|
||||
|
PG_4, //D100
|
||||
|
PG_5, //D101
|
||||
|
PG_6, //D102
|
||||
|
PG_7, //D103
|
||||
|
PG_8, //D104
|
||||
|
PG_9, //D105
|
||||
|
PG_10, //D106
|
||||
|
PG_11, //D107
|
||||
|
PG_12, //D108
|
||||
|
PG_13, //D109
|
||||
|
PG_14, //D110
|
||||
|
PG_15, //D111
|
||||
|
|
||||
|
//Duplicated ADC Pins
|
||||
|
PA_3, //D112/A0
|
||||
|
PA_4, //D113/A1
|
||||
|
PC_0, //D114/A2
|
||||
|
PC_1, //D115/A3
|
||||
|
PC_2, //D116/A4
|
||||
|
PC_3, //D117/A5
|
||||
|
PC_4, //D118/A6
|
||||
|
PF_3, //D119/A16 - 1:FSMC_A3 2:ADC3_IN9
|
||||
|
PF_4, //D120/A17 - 1:FSMC_A4 2:ADC3_IN14
|
||||
|
PF_5, //D121/A18 - 1:FSMC_A5 2:ADC3_IN15
|
||||
|
PF_6, //D122/A19 - 1:TIM10_CH1 2:ADC3_IN4
|
||||
|
PF_7, //D123/A20 - 1:TIM11_CH1 2:ADC3_IN5
|
||||
|
PF_8, //D124/A20 - 1:TIM11_CH1 2:ADC3_IN6
|
||||
|
}; |
||||
|
|
||||
|
#ifdef __cplusplus |
||||
|
} |
||||
|
#endif |
||||
|
|
||||
|
// ----------------------------------------------------------------------------
|
||||
|
|
||||
|
#ifdef __cplusplus |
||||
|
extern "C" { |
||||
|
#endif |
||||
|
|
||||
|
/**
|
||||
|
* @brief System Clock Configuration |
||||
|
* The system Clock is configured as follow : |
||||
|
* System Clock source = PLL (HSE) |
||||
|
* SYSCLK(Hz) = 168000000 |
||||
|
* HCLK(Hz) = 168000000 |
||||
|
* AHB Prescaler = 1 |
||||
|
* APB1 Prescaler = 4 |
||||
|
* APB2 Prescaler = 2 |
||||
|
* HSE Frequency(Hz) = 8000000 |
||||
|
* PLL_M = 8 |
||||
|
* PLL_N = 336 |
||||
|
* PLL_P = 2 |
||||
|
* PLL_Q = 7 |
||||
|
* VDD(V) = 3.3 |
||||
|
* Main regulator output voltage = Scale1 mode |
||||
|
* Flash Latency(WS) = 5 |
||||
|
* @param None |
||||
|
* @retval None |
||||
|
*/ |
||||
|
WEAK void SystemClock_Config(void) |
||||
|
{ |
||||
|
RCC_ClkInitTypeDef RCC_ClkInitStruct; |
||||
|
RCC_OscInitTypeDef RCC_OscInitStruct; |
||||
|
|
||||
|
/* Enable Power Control clock */ |
||||
|
__HAL_RCC_PWR_CLK_ENABLE(); |
||||
|
|
||||
|
/* The voltage scaling allows optimizing the power consumption when the device is
|
||||
|
clocked below the maximum system frequency, to update the voltage scaling value |
||||
|
regarding system frequency refer to product datasheet. */ |
||||
|
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); |
||||
|
|
||||
|
/* Enable HSE Oscillator and activate PLL with HSE as source */ |
||||
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; |
||||
|
RCC_OscInitStruct.HSEState = RCC_HSE_ON; |
||||
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; |
||||
|
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; |
||||
|
RCC_OscInitStruct.PLL.PLLM = 8; |
||||
|
RCC_OscInitStruct.PLL.PLLN = 336; |
||||
|
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; |
||||
|
RCC_OscInitStruct.PLL.PLLQ = 7; |
||||
|
if(HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) |
||||
|
{ |
||||
|
/* Initialization Error */ |
||||
|
} |
||||
|
|
||||
|
if(HAL_PWREx_EnableOverDrive() != HAL_OK) |
||||
|
{ |
||||
|
/* Initialization Error */ |
||||
|
} |
||||
|
|
||||
|
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
|
||||
|
clocks dividers */ |
||||
|
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); |
||||
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; |
||||
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; |
||||
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; |
||||
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; |
||||
|
if(HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK) |
||||
|
{ |
||||
|
/* Initialization Error */ |
||||
|
} |
||||
|
} |
||||
|
|
||||
|
#ifdef __cplusplus |
||||
|
} |
||||
|
#endif |
@ -0,0 +1,216 @@ |
|||||
|
/*
|
||||
|
Copyright (c) 2011 Arduino. All right reserved. |
||||
|
|
||||
|
This library is free software; you can redistribute it and/or |
||||
|
modify it under the terms of the GNU Lesser General Public |
||||
|
License as published by the Free Software Foundation; either |
||||
|
version 2.1 of the License, or (at your option) any later version. |
||||
|
|
||||
|
This library is distributed in the hope that it will be useful, |
||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. |
||||
|
See the GNU Lesser General Public License for more details. |
||||
|
|
||||
|
You should have received a copy of the GNU Lesser General Public |
||||
|
License along with this library; if not, write to the Free Software |
||||
|
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
||||
|
*/ |
||||
|
|
||||
|
#ifndef _VARIANT_ARDUINO_STM32_ |
||||
|
#define _VARIANT_ARDUINO_STM32_ |
||||
|
|
||||
|
#ifdef __cplusplus |
||||
|
extern "C" { |
||||
|
#endif // __cplusplus
|
||||
|
|
||||
|
/*----------------------------------------------------------------------------
|
||||
|
* Pins |
||||
|
*----------------------------------------------------------------------------*/ |
||||
|
|
||||
|
#define PA0 0 //D0
|
||||
|
#define PA1 1 //D1
|
||||
|
#define PA2 2 //D2
|
||||
|
#define PA3 3 //D3
|
||||
|
#define PA4 4 //D4
|
||||
|
#define PA5 5 //D5
|
||||
|
#define PA6 6 //D6
|
||||
|
#define PA7 7 //D7
|
||||
|
#define PA8 8 //D8
|
||||
|
#define PA9 9 //D9
|
||||
|
#define PA10 10 //D10
|
||||
|
#define PA11 11 //D11
|
||||
|
#define PA12 12 //D12
|
||||
|
#define PA13 13 //D13
|
||||
|
#define PA14 14 //D14
|
||||
|
#define PA15 15 //D15
|
||||
|
#define PB0 16 //D16
|
||||
|
#define PB1 17 //D17
|
||||
|
#define PB2 18 //D18
|
||||
|
#define PB3 19 //D19
|
||||
|
#define PB4 20 //D20
|
||||
|
#define PB5 21 //D21
|
||||
|
#define PB6 22 //D22
|
||||
|
#define PB7 23 //D23
|
||||
|
#define PB8 24 //D24
|
||||
|
#define PB9 25 //D25
|
||||
|
#define PB10 26 //D26
|
||||
|
#define PB11 27 //D27
|
||||
|
#define PB12 28 //D28
|
||||
|
#define PB13 29 //D29
|
||||
|
#define PB14 30 //D30
|
||||
|
#define PB15 31 //D31
|
||||
|
#define PC0 32 //D32
|
||||
|
#define PC1 33 //D33
|
||||
|
#define PC2 34 //D34
|
||||
|
#define PC3 35 //D35
|
||||
|
#define PC4 36 //D36
|
||||
|
#define PC5 37 //D37
|
||||
|
#define PC6 38 //D38
|
||||
|
#define PC7 39 //D39
|
||||
|
#define PC8 40 //D40
|
||||
|
#define PC9 41 //D41
|
||||
|
#define PC10 42 //D42
|
||||
|
#define PC11 43 //D43
|
||||
|
#define PC12 44 //D44
|
||||
|
#define PC13 45 //D45
|
||||
|
#define PC14 46 //D46
|
||||
|
#define PC15 47 //D47
|
||||
|
#define PD0 48 //D48
|
||||
|
#define PD1 49 //D49
|
||||
|
#define PD2 50 //D50
|
||||
|
#define PD3 51 //D51
|
||||
|
#define PD4 52 //D52
|
||||
|
#define PD5 53 //D53
|
||||
|
#define PD6 54 //D54
|
||||
|
#define PD7 55 //D55
|
||||
|
#define PD8 56 //D56
|
||||
|
#define PD9 57 //D57
|
||||
|
#define PD10 58 //D58
|
||||
|
#define PD11 59 //D59
|
||||
|
#define PD12 60 //D60
|
||||
|
#define PD13 61 //D61
|
||||
|
#define PD14 62 //D62
|
||||
|
#define PD15 63 //D63
|
||||
|
#define PE0 64 //D64
|
||||
|
#define PE1 65 //D65
|
||||
|
#define PE2 66 //D66
|
||||
|
#define PE3 67 //D67
|
||||
|
#define PE4 68 //D68
|
||||
|
#define PE5 69 //D69
|
||||
|
#define PE6 70 //D70
|
||||
|
#define PE7 71 //D71
|
||||
|
#define PE8 72 //D72
|
||||
|
#define PE9 73 //D73
|
||||
|
#define PE10 74 //D74
|
||||
|
#define PE11 75 //D75
|
||||
|
#define PE12 76 //D76
|
||||
|
#define PE13 77 //D77
|
||||
|
#define PE14 78 //D78
|
||||
|
#define PE15 79 //D79
|
||||
|
#define PF0 80 //D64
|
||||
|
#define PF1 81 //D65
|
||||
|
#define PF2 82 //D66
|
||||
|
#define PF3 83 //D67
|
||||
|
#define PF4 84 //D68
|
||||
|
#define PF5 85 //D69
|
||||
|
#define PF6 86 //D70
|
||||
|
#define PF7 87 //D71
|
||||
|
#define PF8 88 //D72
|
||||
|
#define PF9 89 //D73
|
||||
|
#define PF10 90 //D74
|
||||
|
#define PF11 91 //D75
|
||||
|
#define PF12 92 //D76
|
||||
|
#define PF13 93 //D77
|
||||
|
#define PF14 94 //D78
|
||||
|
#define PF15 95 //D79
|
||||
|
#define PG0 96 //D64
|
||||
|
#define PG1 97 //D65
|
||||
|
#define PG2 98 //D66
|
||||
|
#define PG3 99 //D67
|
||||
|
#define PG4 100 //D68
|
||||
|
#define PG5 101 //D69
|
||||
|
#define PG6 102 //D70
|
||||
|
#define PG7 103 //D71
|
||||
|
#define PG8 104 //D72
|
||||
|
#define PG9 105 //D73
|
||||
|
#define PG10 106 //D74
|
||||
|
#define PG11 107 //D75
|
||||
|
#define PG12 108 //D76
|
||||
|
#define PG13 109 //D77
|
||||
|
#define PG14 110 //D78
|
||||
|
#define PG15 111 //D79
|
||||
|
|
||||
|
// This must be a literal with the same value as PEND
|
||||
|
#define NUM_DIGITAL_PINS 125 |
||||
|
// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS
|
||||
|
#define NUM_ANALOG_INPUTS 13 |
||||
|
#define NUM_ANALOG_FIRST 112 |
||||
|
|
||||
|
//#define ADC_RESOLUTION 12
|
||||
|
|
||||
|
// PWM resolution
|
||||
|
//#define PWM_RESOLUTION 12
|
||||
|
#define PWM_FREQUENCY 1000 // >= 20 Khz => inaudible noise for fans
|
||||
|
#define PWM_MAX_DUTY_CYCLE 255 |
||||
|
|
||||
|
// SPI Definitions
|
||||
|
#define PIN_SPI_SS PA4 |
||||
|
#define PIN_SPI_MOSI PA7 |
||||
|
#define PIN_SPI_MISO PA6 |
||||
|
#define PIN_SPI_SCK PA5 |
||||
|
|
||||
|
// I2C Definitions
|
||||
|
#define PIN_WIRE_SDA PB9 |
||||
|
#define PIN_WIRE_SCL PB8 |
||||
|
|
||||
|
// Timer Definitions
|
||||
|
// Do not use timer used by PWM pin. See PinMap_PWM.
|
||||
|
#define TIMER_TONE TIM6 |
||||
|
#define TIMER_SERVO TIM5 |
||||
|
#define TIMER_SERIAL TIM7 |
||||
|
|
||||
|
// UART Definitions
|
||||
|
//#define SERIAL_UART_INSTANCE 1 // Connected to EXP3 header
|
||||
|
/* Enable Serial 3 */ |
||||
|
#define HAVE_HWSERIAL1 |
||||
|
#define HAVE_HWSERIAL3 |
||||
|
|
||||
|
// Default pin used for 'Serial' instance (ex: ST-Link)
|
||||
|
// Mandatory for Firmata
|
||||
|
#define PIN_SERIAL_RX PA10 |
||||
|
#define PIN_SERIAL_TX PA9 |
||||
|
|
||||
|
/* HAL configuration */ |
||||
|
#define HSE_VALUE 8000000U |
||||
|
|
||||
|
#define FLASH_PAGE_SIZE (4U * 1024U) |
||||
|
|
||||
|
#ifdef __cplusplus |
||||
|
} // extern "C"
|
||||
|
#endif |
||||
|
|
||||
|
/*----------------------------------------------------------------------------
|
||||
|
* Arduino objects - C++ only |
||||
|
*----------------------------------------------------------------------------*/ |
||||
|
|
||||
|
#ifdef __cplusplus |
||||
|
// These serial port names are intended to allow libraries and architecture-neutral
|
||||
|
// sketches to automatically default to the correct port name for a particular type
|
||||
|
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
|
||||
|
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
|
||||
|
//
|
||||
|
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
|
||||
|
//
|
||||
|
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
|
||||
|
//
|
||||
|
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
|
||||
|
//
|
||||
|
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
|
||||
|
//
|
||||
|
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
|
||||
|
// pins are NOT connected to anything by default.
|
||||
|
#define SERIAL_PORT_MONITOR Serial |
||||
|
#define SERIAL_PORT_HARDWARE_OPEN Serial |
||||
|
#endif |
||||
|
|
||||
|
#endif /* _VARIANT_ARDUINO_STM32_ */ |
@ -1,5 +1,5 @@ |
|||||
MEMORY |
MEMORY |
||||
{ |
{ |
||||
ram (rwx) : ORIGIN = 0x20000C00, LENGTH = 61K |
ram (rwx) : ORIGIN = 0x20000C00, LENGTH = 64K - 3K |
||||
rom (rx) : ORIGIN = 0x08005000, LENGTH = 492K |
rom (rx) : ORIGIN = 0x08005000, LENGTH = 512K - 20K |
||||
} |
} |
||||
|
Loading…
Reference in new issue