Browse Source

Add FLY_CDY board (#19979)

Co-authored-by: FLYmaker <FLYmaker@users.noreply.github.com>
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
Co-authored-by: Jason Smith <jason.inet@gmail.com>
vanilla_fb_2.0.x
石立枫 4 years ago
committed by Scott Lahteine
parent
commit
78eb12958a
  1. 1
      Marlin/src/core/boards.h
  2. 188
      Marlin/src/pins/lpc1769/pins_FLY_CDY.h
  3. 2
      Marlin/src/pins/pins.h

1
Marlin/src/core/boards.h

@ -243,6 +243,7 @@
#define BOARD_BTT_SKR_V1_4_TURBO 2508 // BigTreeTech SKR v1.4 TURBO (Power outputs: Hotend0, Hotend1, Fan, Bed)
#define BOARD_MKS_SGEN_L_V2 2509 // MKS SGEN_L V2 (Power outputs: Hotend0, Hotend1, Bed, Fan)
#define BOARD_BTT_SKR_E3_TURBO 2510 // BigTreeTech SKR E3 Turbo (Power outputs: Hotend0, Hotend1, Bed, Fan0, Fan1)
#define BOARD_FLY_CDY 2511 // FLY_CDY (Power outputs: Hotend0, Hotend1, Hotend2, Bed, Fan0, Fan1, Fan2)
//
// SAM3X8E ARM Cortex M3

188
Marlin/src/pins/lpc1769/pins_FLY_CDY.h

@ -0,0 +1,188 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#if NOT_TARGET(MCU_LPC1769)
#error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
#endif
#define BOARD_INFO_NAME "FLY-CDY"
#define BOARD_WEBSITE_URL "https://github.com/FLYmaker/FLY-CDY"
//
// Servos
//
#define SERVO0_PIN P1_26
//
// Limit Switches
//
#define X_MIN_PIN P1_29 // X-
#define X_MAX_PIN P1_28 // X+
#define Y_MIN_PIN P1_27 // Y-
#define Y_MAX_PIN P1_25 // Y+
#define Z_MIN_PIN P1_22 // Z-
#define Z_MAX_PIN P0_27 // Z+
//
// Steppers
//
#define X_STEP_PIN P2_00
#define X_DIR_PIN P1_01
#define X_ENABLE_PIN P1_00
#ifndef X_CS_PIN
#define X_CS_PIN P1_04
#endif
#define Y_STEP_PIN P2_01
#define Y_DIR_PIN P1_09
#define Y_ENABLE_PIN P1_08
#ifndef Y_CS_PIN
#define Y_CS_PIN P1_10
#endif
#define Z_STEP_PIN P2_02
#define Z_DIR_PIN P1_15
#define Z_ENABLE_PIN P1_14
#ifndef Z_CS_PIN
#define Z_CS_PIN P1_16
#endif
#define E0_STEP_PIN P2_03
#define E0_DIR_PIN P4_29
#define E0_ENABLE_PIN P1_17
#ifndef E0_CS_PIN
#define E0_CS_PIN P4_28
#endif
#define E1_STEP_PIN P2_04
#define E1_DIR_PIN P2_11
#define E1_ENABLE_PIN P0_04
#ifndef E1_CS_PIN
#define E1_CS_PIN P2_12
#endif
#define E2_STEP_PIN P2_05
#define E2_DIR_PIN P0_11
#define E2_ENABLE_PIN P2_13
#ifndef E2_CS_PIN
#define E2_CS_PIN P0_10
#endif
//
// Software SPI pins for TMC2130 stepper drivers
//
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI P0_20
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO P0_19
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK P0_21
#endif
#endif
#if HAS_TMC_UART
#define X_SERIAL_TX_PIN P1_04
#define X_SERIAL_RX_PIN P1_04
#define Y_SERIAL_TX_PIN P1_10
#define Y_SERIAL_RX_PIN P1_10
#define Z_SERIAL_TX_PIN P1_16
#define Z_SERIAL_RX_PIN P1_16
#define E0_SERIAL_TX_PIN P4_28
#define E0_SERIAL_RX_PIN P4_28
#define E1_SERIAL_TX_PIN P2_12
#define E1_SERIAL_RX_PIN P2_12
#define E2_SERIAL_TX_PIN P0_10
#define E2_SERIAL_RX_PIN P0_10
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#endif
//
// Temperature Sensors
//
#define TEMP_0_PIN P0_26_A3 // (T4)
#define TEMP_1_PIN P0_25_A2 // (T3)
#define TEMP_2_PIN P0_24_A1 // (T2)
#define TEMP_BED_PIN P0_23_A0 // (T1)
//
// Heaters / Fans
//
#define HEATER_BED_PIN P3_26
#define HEATER_0_PIN P3_25
#define HEATER_1_PIN P1_20
#define HEATER_2_PIN P1_23
#ifndef FAN_PIN
#define FAN_PIN P1_18
#endif
#define FAN1_PIN P1_21
#define FAN2_PIN P1_24
//
// LCD / Controller
//
#define BEEPER_PIN P2_07
#define LCD_PINS_RS P2_10
#define LCD_PINS_ENABLE P0_22
#define LCD_PINS_D4 P1_19
#define LCD_PINS_D5 P2_08
#define LCD_PINS_D6 P1_30
#define LCD_PINS_D7 P1_31
#define BTN_EN1 P0_00
#define BTN_EN2 P0_01
#define BTN_ENC P0_28
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
#endif
#if SD_CONNECTION_IS(ONBOARD)
#define SS_PIN P0_06
#define SCK_PIN P0_07
#define MISO_PIN P0_08
#define MOSI_PIN P0_09
#define SD_DETECT_PIN P0_05
#elif SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_15
#define MISO_PIN P0_17
#define MOSI_PIN P0_18
#define SS_PIN P0_16
#define SD_DETECT_PIN P2_06
#endif

2
Marlin/src/pins/pins.h

@ -433,6 +433,8 @@
#include "lpc1769/pins_MKS_SGEN_L_V2.h" // LPC1769 env:LPC1769
#elif MB(BTT_SKR_E3_TURBO)
#include "lpc1769/pins_BTT_SKR_E3_TURBO.h" // LPC1769 env:LPC1769
#elif MB(FLY_CDY)
#include "lpc1769/pins_FLY_CDY.h" // LPC1769 env:LPC1769
//
// Due (ATSAM) boards

Loading…
Cancel
Save