🎨 Check flags without ENABLED

Marlin/src/MarlinCore.cpp

@@ -135,7 +135,7 @@
   #include "module/servo.h"
 #endif
 
-#if ENABLED(HAS_MOTOR_CURRENT_DAC)
+#if HAS_MOTOR_CURRENT_DAC
   #include "feature/dac/stepper_dac.h"
 #endif
 
@@ -1355,7 +1355,7 @@ void setup() {
     SETUP_RUN(digipot_i2c.init());
   #endif
 
-  #if ENABLED(HAS_MOTOR_CURRENT_DAC)
+  #if HAS_MOTOR_CURRENT_DAC
     SETUP_RUN(stepper_dac.init());
   #endif
 

Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp

@@ -307,7 +307,7 @@ void unified_bed_leveling::G29() {
 
   const uint8_t p_val = parser.byteval('P');
   const bool may_move = p_val == 1 || p_val == 2 || p_val == 4 || parser.seen_test('J');
-  #if ENABLED(HAS_MULTI_HOTEND)
+  #if HAS_MULTI_HOTEND
     const uint8_t old_tool_index = active_extruder;
   #endif
 

Marlin/src/feature/dac/dac_mcp4728.cpp

@@ -32,7 +32,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if ENABLED(HAS_MOTOR_CURRENT_DAC)
+#if HAS_MOTOR_CURRENT_DAC
 
 #include "dac_mcp4728.h"
 

Marlin/src/feature/dac/stepper_dac.cpp

@@ -26,7 +26,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if ENABLED(HAS_MOTOR_CURRENT_DAC)
+#if HAS_MOTOR_CURRENT_DAC
 
 #include "stepper_dac.h"
 #include "../../MarlinCore.h" // for SP_X_LBL...

Marlin/src/feature/joystick.h

@@ -32,13 +32,13 @@
 class Joystick {
   friend class Temperature;
   private:
-    #if ENABLED(HAS_JOY_ADC_X)
+    #if HAS_JOY_ADC_X
       static temp_info_t x;
     #endif
-    #if ENABLED(HAS_JOY_ADC_Y)
+    #if HAS_JOY_ADC_Y
       static temp_info_t y;
     #endif
-    #if ENABLED(HAS_JOY_ADC_Z)
+    #if HAS_JOY_ADC_Z
       static temp_info_t z;
     #endif
   public:

Marlin/src/feature/powerloss.h

@@ -64,13 +64,13 @@ typedef struct {
     Repeat stored_repeat;
   #endif
 
-  #if ENABLED(HAS_HOME_OFFSET)
+  #if HAS_HOME_OFFSET
     xyz_pos_t home_offset;
   #endif
-  #if ENABLED(HAS_POSITION_SHIFT)
+  #if HAS_POSITION_SHIFT
     xyz_pos_t position_shift;
   #endif
-  #if ENABLED(HAS_MULTI_EXTRUDER)
+  #if HAS_MULTI_EXTRUDER
     uint8_t active_extruder;
   #endif
 
@@ -78,13 +78,13 @@ typedef struct {
     float filament_size[EXTRUDERS];
   #endif
 
-  #if ENABLED(HAS_HOTEND)
+  #if HAS_HOTEND
     celsius_t target_temperature[HOTENDS];
   #endif
-  #if ENABLED(HAS_HEATED_BED)
+  #if HAS_HEATED_BED
     celsius_t target_temperature_bed;
   #endif
-  #if ENABLED(HAS_FAN)
+  #if HAS_FAN
     uint8_t fan_speed[FAN_COUNT];
   #endif
 

Marlin/src/feature/tmc_util.h

@@ -363,7 +363,7 @@ void test_tmc_connection(LOGICAL_AXIS_DECL(const bool, true));
 
     struct motion_state_t {
       xy_ulong_t acceleration;
-      #if ENABLED(HAS_CLASSIC_JERK)
+      #if HAS_CLASSIC_JERK
         xy_float_t jerk_state;
       #endif
     };

Marlin/src/gcode/calibrate/G33.cpp

@@ -63,7 +63,7 @@ enum CalEnum : char {                        // the 7 main calibration points -
 #define LOOP_CAL_RAD(VAR) LOOP_CAL_PT(VAR, __A, _7P_STEP)
 #define LOOP_CAL_ACT(VAR, _4P, _OP) LOOP_CAL_PT(VAR, _OP ? _AB : __A, _4P ? _4P_STEP : _7P_STEP)
 
-#if ENABLED(HAS_MULTI_HOTEND)
+#if HAS_MULTI_HOTEND
   const uint8_t old_tool_index = active_extruder;
 #endif
 

Marlin/src/gcode/calibrate/G34.cpp

@@ -81,11 +81,11 @@ void GcodeSuite::G34() {
     const uint16_t target_current = parser.intval('S', GANTRY_CALIBRATION_CURRENT);
     const uint32_t previous_current = stepper.motor_current_setting[Z_AXIS];
     stepper.set_digipot_current(1, target_current);
-  #elif ENABLED(HAS_MOTOR_CURRENT_DAC)
+  #elif HAS_MOTOR_CURRENT_DAC
     const float target_current = parser.floatval('S', GANTRY_CALIBRATION_CURRENT);
     const float previous_current = dac_amps(Z_AXIS, target_current);
     stepper_dac.set_current_value(Z_AXIS, target_current);
-  #elif ENABLED(HAS_MOTOR_CURRENT_I2C)
+  #elif HAS_MOTOR_CURRENT_I2C
     const uint16_t target_current = parser.intval('S', GANTRY_CALIBRATION_CURRENT);
     previous_current = dac_amps(Z_AXIS);
     digipot_i2c.set_current(Z_AXIS, target_current)
@@ -127,9 +127,9 @@ void GcodeSuite::G34() {
     stepper.set_digipot_current(Z_AXIS, previous_current);
   #elif HAS_MOTOR_CURRENT_PWM
     stepper.set_digipot_current(1, previous_current);
-  #elif ENABLED(HAS_MOTOR_CURRENT_DAC)
+  #elif HAS_MOTOR_CURRENT_DAC
     stepper_dac.set_current_value(Z_AXIS, previous_current);
-  #elif ENABLED(HAS_MOTOR_CURRENT_I2C)
+  #elif HAS_MOTOR_CURRENT_I2C
     digipot_i2c.set_current(Z_AXIS, previous_current)
   #elif HAS_TRINAMIC_CONFIG
     #if AXIS_IS_TMC(Z)

Marlin/src/gcode/feature/digipot/M907-M910.cpp

@@ -34,7 +34,7 @@
   #include "../../../feature/digipot/digipot.h"
 #endif
 
-#if ENABLED(HAS_MOTOR_CURRENT_DAC)
+#if HAS_MOTOR_CURRENT_DAC
   #include "../../../feature/dac/stepper_dac.h"
 #endif
 
@@ -73,7 +73,7 @@ void GcodeSuite::M907() {
     #endif
   #endif
 
-  #if ENABLED(HAS_MOTOR_CURRENT_DAC)
+  #if HAS_MOTOR_CURRENT_DAC
     if (parser.seenval('S')) {
       const float dac_percent = parser.value_float();
       LOOP_LE_N(i, 4) stepper_dac.set_current_percent(i, dac_percent);
@@ -92,7 +92,7 @@ void GcodeSuite::M907() {
     TERN_(HAS_MOTOR_CURRENT_DAC, stepper_dac.set_current_value(parser.byteval('P', -1), parser.ushortval('S', 0)));
   }
 
-  #if ENABLED(HAS_MOTOR_CURRENT_DAC)
+  #if HAS_MOTOR_CURRENT_DAC
 
     void GcodeSuite::M909() { stepper_dac.print_values(); }
     void GcodeSuite::M910() { stepper_dac.commit_eeprom(); }

Marlin/src/gcode/gcode.cpp

@@ -908,7 +908,7 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
         case 907: M907(); break;                                  // M907: Set digital trimpot motor current using axis codes.
         #if EITHER(HAS_MOTOR_CURRENT_SPI, HAS_MOTOR_CURRENT_DAC)
           case 908: M908(); break;                                // M908: Control digital trimpot directly.
-          #if ENABLED(HAS_MOTOR_CURRENT_DAC)
+          #if HAS_MOTOR_CURRENT_DAC
             case 909: M909(); break;                              // M909: Print digipot/DAC current value
             case 910: M910(); break;                              // M910: Commit digipot/DAC value to external EEPROM
           #endif

Marlin/src/gcode/gcode.h

@@ -524,7 +524,7 @@ private:
     static void G38(const int8_t subcode);
   #endif
 
-  #if ENABLED(HAS_MESH)
+  #if HAS_MESH
     static void G42();
   #endif
 
@@ -557,7 +557,7 @@ private:
     static void G425();
   #endif
 
-  #if ENABLED(HAS_RESUME_CONTINUE)
+  #if HAS_RESUME_CONTINUE
     static void M0_M1();
   #endif
 
@@ -612,7 +612,7 @@ private:
   static void M31();
 
   #if ENABLED(SDSUPPORT)
-    #if ENABLED(HAS_MEDIA_SUBCALLS)
+    #if HAS_MEDIA_SUBCALLS
       static void M32();
     #endif
     #if ENABLED(LONG_FILENAME_HOST_SUPPORT)
@@ -743,7 +743,7 @@ private:
     static void M149();
   #endif
 
-  #if ENABLED(HAS_COLOR_LEDS)
+  #if HAS_COLOR_LEDS
     static void M150();
   #endif
 
@@ -777,7 +777,7 @@ private:
   static void M204();
   static void M205();
 
-  #if ENABLED(HAS_M206_COMMAND)
+  #if HAS_M206_COMMAND
     static void M206();
   #endif
 
@@ -791,11 +791,11 @@ private:
 
   static void M211();
 
-  #if ENABLED(HAS_MULTI_EXTRUDER)
+  #if HAS_MULTI_EXTRUDER
     static void M217();
   #endif
 
-  #if ENABLED(HAS_HOTEND_OFFSET)
+  #if HAS_HOTEND_OFFSET
     static void M218();
   #endif
 
@@ -813,7 +813,7 @@ private:
     static void M240();
   #endif
 
-  #if ENABLED(HAS_LCD_CONTRAST)
+  #if HAS_LCD_CONTRAST
     static void M250();
   #endif
 
@@ -833,7 +833,7 @@ private:
     static void M290();
   #endif
 
-  #if ENABLED(HAS_BUZZER)
+  #if HAS_BUZZER
     static void M300();
   #endif
 
@@ -845,7 +845,7 @@ private:
     static void M302();
   #endif
 
-  #if ENABLED(HAS_PID_HEATING)
+  #if HAS_PID_HEATING
     static void M303();
   #endif
 
@@ -853,7 +853,7 @@ private:
     static void M304();
   #endif
 
-  #if ENABLED(HAS_USER_THERMISTORS)
+  #if HAS_USER_THERMISTORS
     static void M305();
   #endif
 
@@ -894,7 +894,7 @@ private:
     static void M402();
   #endif
 
-  #if ENABLED(HAS_PRUSA_MMU2)
+  #if HAS_PRUSA_MMU2
     static void M403();
   #endif
 
@@ -905,11 +905,11 @@ private:
     static void M407();
   #endif
 
-  #if ENABLED(HAS_FILAMENT_SENSOR)
+  #if HAS_FILAMENT_SENSOR
     static void M412();
   #endif
 
-  #if ENABLED(HAS_MULTI_LANGUAGE)
+  #if HAS_MULTI_LANGUAGE
     static void M414();
   #endif
 
@@ -922,11 +922,11 @@ private:
     static void M425();
   #endif
 
-  #if ENABLED(HAS_M206_COMMAND)
+  #if HAS_M206_COMMAND
     static void M428();
   #endif
 
-  #if ENABLED(HAS_POWER_MONITOR)
+  #if HAS_POWER_MONITOR
     static void M430();
   #endif
 
@@ -977,11 +977,11 @@ private:
     static void M603();
   #endif
 
-  #if ENABLED(HAS_DUPLICATION_MODE)
+  #if HAS_DUPLICATION_MODE
     static void M605();
   #endif
 
-  #if ENABLED(IS_KINEMATIC)
+  #if IS_KINEMATIC
     static void M665();
   #endif
 
@@ -1006,7 +1006,7 @@ private:
     static void M810_819();
   #endif
 
-  #if ENABLED(HAS_BED_PROBE)
+  #if HAS_BED_PROBE
     static void M851();
   #endif
 
@@ -1039,7 +1039,7 @@ private:
   #if HAS_TRINAMIC_CONFIG
     static void M122();
     static void M906();
-    #if ENABLED(HAS_STEALTHCHOP)
+    #if HAS_STEALTHCHOP
       static void M569();
     #endif
     #if ENABLED(MONITOR_DRIVER_STATUS)
@@ -1066,7 +1066,7 @@ private:
     static void M907();
     #if EITHER(HAS_MOTOR_CURRENT_SPI, HAS_MOTOR_CURRENT_DAC)
       static void M908();
-      #if ENABLED(HAS_MOTOR_CURRENT_DAC)
+      #if HAS_MOTOR_CURRENT_DAC
         static void M909();
         static void M910();
       #endif

Marlin/src/gcode/queue.h

@@ -59,7 +59,7 @@ public:
   struct CommandLine {
     char buffer[MAX_CMD_SIZE];      //!< The command buffer
     bool skip_ok;                   //!< Skip sending ok when command is processed?
-    #if ENABLED(HAS_MULTI_SERIAL)
+    #if HAS_MULTI_SERIAL
       serial_index_t port;          //!< Serial port the command was received on
     #endif
   };

Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp

@@ -536,7 +536,7 @@ void ST7920_Lite_Status_Screen::draw_heat_icon(const bool whichIcon, const bool
 static struct {
   bool E1_show_target  : 1;
   bool E2_show_target  : 1;
-  #if ENABLED(HAS_HEATED_BED)
+  #if HAS_HEATED_BED
     bool bed_show_target : 1;
   #endif
 } display_state = {

Marlin/src/lcd/dwin/e3v2/dwin.cpp

@@ -182,10 +182,10 @@ static uint8_t _card_percent = 0;
 static uint16_t _remain_time = 0;
 
 #if ENABLED(PAUSE_HEAT)
-  #if ENABLED(HAS_HOTEND)
+  #if HAS_HOTEND
     uint16_t resume_hotend_temp = 0;
   #endif
-  #if ENABLED(HAS_HEATED_BED)
+  #if HAS_HEATED_BED
     uint16_t resume_bed_temp = 0;
   #endif
 #endif

Marlin/src/lcd/dwin/e3v2/dwin.h

@@ -255,13 +255,13 @@ extern char print_filename[16];
 extern millis_t dwin_heat_time;
 
 typedef struct {
-  #if ENABLED(HAS_HOTEND)
+  #if HAS_HOTEND
     celsius_t E_Temp = 0;
   #endif
-  #if ENABLED(HAS_HEATED_BED)
+  #if HAS_HEATED_BED
     celsius_t Bed_Temp = 0;
   #endif
-  #if ENABLED(HAS_FAN)
+  #if HAS_FAN
     int16_t Fan_speed = 0;
   #endif
   int16_t print_speed     = 100;
@@ -344,13 +344,13 @@ void HMI_Move_E();
 
 void HMI_Zoffset();
 
-#if ENABLED(HAS_HOTEND)
+#if HAS_HOTEND
   void HMI_ETemp();
 #endif
-#if ENABLED(HAS_HEATED_BED)
+#if HAS_HEATED_BED
   void HMI_BedTemp();
 #endif
-#if ENABLED(HAS_FAN)
+#if HAS_FAN
   void HMI_FanSpeed();
 #endif
 

Marlin/src/lcd/extui/dgus/DGUSScreenHandler.cpp

@@ -622,7 +622,7 @@ void DGUSScreenHandler::HandleHeaterControl(DGUS_VP_Variable &var, void *val_ptr
     DEBUG_ECHOLNPGM("HandlePreheat");
 
     uint8_t e_temp = 0;
-    #if ENABLED(HAS_HEATED_BED)
+    #if HAS_HEATED_BED
       uint8_t bed_temp = 0;
     #endif
     const uint16_t preheat_option = swap16(*(uint16_t*)val_ptr);

Marlin/src/lcd/extui/dgus/mks/DGUSDisplayDef.cpp

@@ -35,7 +35,7 @@
 #include "../../ui_api.h"
 #include "../../../marlinui.h"
 
-#if ENABLED(HAS_STEALTHCHOP)
+#if HAS_STEALTHCHOP
   #include "../../../../module/stepper/trinamic.h"
 #endif
 

Marlin/src/lcd/extui/dgus/mks/DGUSScreenHandler.cpp

@@ -37,7 +37,7 @@
 
 #include "../../../../gcode/gcode.h"
 
-#if ENABLED(HAS_STEALTHCHOP)
+#if HAS_STEALTHCHOP
   #include "../../../../module/stepper/trinamic.h"
   #include "../../../../module/stepper/indirection.h"
 #endif
@@ -396,7 +396,7 @@ void DGUSScreenHandler::Z_offset_select(DGUS_VP_Variable &var, void *val_ptr) {
 
 void DGUSScreenHandler::GetOffsetValue(DGUS_VP_Variable &var, void *val_ptr) {
 
-  #if ENABLED(HAS_BED_PROBE)
+  #if HAS_BED_PROBE
     int32_t value = swap32(*(int32_t *)val_ptr);
     float Offset = value / 100.0f;
     DEBUG_ECHOLNPAIR_F("\nget int6 offset >> ", value, 6);

Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/advanced_settings_menu.cpp

@@ -122,7 +122,7 @@ bool AdvancedSettingsMenu::onTouchEnd(uint8_t tag) {
     case  2: GOTO_SCREEN(ZOffsetScreen);              break;
     #endif
     case  3: GOTO_SCREEN(StepsScreen);                break;
-    #if ENABLED(HAS_MULTI_HOTEND)
+    #if HAS_MULTI_HOTEND
     case  4: GOTO_SCREEN(NozzleOffsetScreen);         break;
     #endif
     case  5: GOTO_SCREEN(MaxVelocityScreen);          break;

Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/leveling_menu.cpp

@@ -106,7 +106,7 @@ bool LevelingMenu::onTouchEnd(uint8_t tag) {
     #if EITHER(Z_STEPPER_AUTO_ALIGN,MECHANICAL_GANTRY_CALIBRATION)
       case 2: SpinnerDialogBox::enqueueAndWait_P(F("G34")); break;
     #endif
-    #if ENABLED(HAS_BED_PROBE)
+    #if HAS_BED_PROBE
       case 3:
         #ifndef BED_LEVELING_COMMANDS
           #define BED_LEVELING_COMMANDS "G29"

Marlin/src/lcd/extui/mks_ui/draw_printing.cpp

@@ -49,7 +49,7 @@ static lv_obj_t *labelPause, *labelStop, *labelOperat;
 static lv_obj_t *bar1, *bar1ValueText;
 static lv_obj_t *buttonPause, *buttonOperat, *buttonStop, *buttonExt1, *buttonExt2, *buttonBedstate, *buttonFanstate, *buttonZpos;
 
-#if ENABLED(HAS_MULTI_EXTRUDER)
+#if HAS_MULTI_EXTRUDER
   static lv_obj_t *labelExt2;
 #endif
 

Marlin/src/lcd/extui/ui_api.cpp

@@ -178,10 +178,10 @@ namespace ExtUI {
         #if HAS_HEATED_BED
           case BED: thermalManager.reset_bed_idle_timer(); return;
         #endif
-        #if ENABLED(HAS_HEATED_CHAMBER)
+        #if HAS_HEATED_CHAMBER
           case CHAMBER: return; // Chamber has no idle timer
         #endif
-        #if ENABLED(HAS_COOLER)
+        #if HAS_COOLER
           case COOLER: return;  // Cooler has no idle timer
         #endif
         default:
@@ -241,10 +241,10 @@ namespace ExtUI {
   bool isHeaterIdle(const heater_t heater) {
     #if HEATER_IDLE_HANDLER
       switch (heater) {
-        #if ENABLED(HAS_HEATED_BED)
+        #if HAS_HEATED_BED
           case BED: return thermalManager.heater_idle[thermalManager.IDLE_INDEX_BED].timed_out;
         #endif
-        #if ENABLED(HAS_HEATED_CHAMBER)
+        #if HAS_HEATED_CHAMBER
           case CHAMBER: return false; // Chamber has no idle timer
         #endif
         default:
@@ -264,10 +264,10 @@ namespace ExtUI {
 
   celsius_float_t getActualTemp_celsius(const heater_t heater) {
     switch (heater) {
-      #if ENABLED(HAS_HEATED_BED)
+      #if HAS_HEATED_BED
         case BED: return GET_TEMP_ADJUSTMENT(thermalManager.degBed());
       #endif
-      #if ENABLED(HAS_HEATED_CHAMBER)
+      #if HAS_HEATED_CHAMBER
         case CHAMBER: return GET_TEMP_ADJUSTMENT(thermalManager.degChamber());
       #endif
       default: return GET_TEMP_ADJUSTMENT(thermalManager.degHotend(heater - H0));
@@ -280,10 +280,10 @@ namespace ExtUI {
 
   celsius_float_t getTargetTemp_celsius(const heater_t heater) {
     switch (heater) {
-      #if ENABLED(HAS_HEATED_BED)
+      #if HAS_HEATED_BED
         case BED: return GET_TEMP_ADJUSTMENT(thermalManager.degTargetBed());
       #endif
-      #if ENABLED(HAS_HEATED_CHAMBER)
+      #if HAS_HEATED_CHAMBER
         case CHAMBER: return GET_TEMP_ADJUSTMENT(thermalManager.degTargetChamber());
       #endif
       default: return GET_TEMP_ADJUSTMENT(thermalManager.degTargetHotend(heater - H0));

Marlin/src/lcd/marlinui.h

@@ -111,13 +111,13 @@
 
 #if PREHEAT_COUNT
   typedef struct {
-    #if ENABLED(HAS_HOTEND)
+    #if HAS_HOTEND
       celsius_t hotend_temp;
     #endif
-    #if ENABLED(HAS_HEATED_BED)
+    #if HAS_HEATED_BED
       celsius_t bed_temp;
     #endif
-    #if ENABLED(HAS_FAN)
+    #if HAS_FAN
       uint16_t fan_speed;
     #endif
   } preheat_t;
@@ -135,12 +135,12 @@
       static int8_t constexpr e_index = 0;
     #endif
     static millis_t start_time;
-    #if ENABLED(IS_KINEMATIC)
+    #if IS_KINEMATIC
       static xyze_pos_t all_axes_destination;
     #endif
   public:
     static float menu_scale;
-    #if ENABLED(IS_KINEMATIC)
+    #if IS_KINEMATIC
       static float offset;
     #endif
     template <typename T>

Marlin/src/lcd/menu/menu_advanced.cpp

@@ -58,7 +58,7 @@
 void menu_tmc();
 void menu_backlash();
 
-#if ENABLED(HAS_MOTOR_CURRENT_DAC)
+#if HAS_MOTOR_CURRENT_DAC
 
   #include "../../feature/dac/stepper_dac.h"
 
@@ -590,7 +590,7 @@ void menu_advanced_settings() {
     SUBMENU(MSG_BACKLASH, menu_backlash);
   #endif
 
-  #if ENABLED(HAS_MOTOR_CURRENT_DAC)
+  #if HAS_MOTOR_CURRENT_DAC
     SUBMENU(MSG_DRIVE_STRENGTH, menu_dac);
   #endif
   #if HAS_MOTOR_CURRENT_PWM

Marlin/src/module/settings.cpp

@@ -3818,10 +3818,10 @@ void MarlinSettings::reset() {
         SERIAL_CHAR(' ', 'B');                                 // B (maps to E1 by default)
         SERIAL_ECHOLN(stepper.motor_current_setting[4]);
       #endif
-    #elif ENABLED(HAS_MOTOR_CURRENT_I2C)                       // i2c-based has any number of values
+    #elif HAS_MOTOR_CURRENT_I2C                                // i2c-based has any number of values
       // Values sent over i2c are not stored.
       // Indexes map directly to drivers, not axes.
-    #elif ENABLED(HAS_MOTOR_CURRENT_DAC)                       // DAC-based has 4 values, for X Y Z (I J K) E
+    #elif HAS_MOTOR_CURRENT_DAC                                // DAC-based has 4 values, for X Y Z (I J K) E
       // Values sent over i2c are not stored. Uses indirect mapping.
     #endif
 

Marlin/src/module/temperature.h

@@ -340,16 +340,16 @@ class Temperature {
       static const celsius_t hotend_maxtemp[HOTENDS];
       static inline celsius_t hotend_max_target(const uint8_t e) { return hotend_maxtemp[e] - (HOTEND_OVERSHOOT); }
     #endif
-    #if ENABLED(HAS_HEATED_BED)
+    #if HAS_HEATED_BED
       static bed_info_t temp_bed;
     #endif
-    #if ENABLED(HAS_TEMP_PROBE)
+    #if HAS_TEMP_PROBE
       static probe_info_t temp_probe;
     #endif
-    #if ENABLED(HAS_TEMP_CHAMBER)
+    #if HAS_TEMP_CHAMBER
       static chamber_info_t temp_chamber;
     #endif
-    #if ENABLED(HAS_TEMP_COOLER)
+    #if HAS_TEMP_COOLER
       static cooler_info_t temp_cooler;
     #endif
     #if HAS_TEMP_REDUNDANT
@@ -441,7 +441,7 @@ class Temperature {
       static lpq_ptr_t lpq_ptr;
     #endif
 
-    #if ENABLED(HAS_HOTEND)
+    #if HAS_HOTEND
       static temp_range_t temp_range[HOTENDS];
     #endif
 
@@ -477,7 +477,7 @@ class Temperature {
       static millis_t preheat_end_time[HOTENDS];
     #endif
 
-    #if ENABLED(HAS_AUTO_FAN)
+    #if HAS_AUTO_FAN
       static millis_t next_auto_fan_check_ms;
     #endif
 
@@ -920,7 +920,7 @@ class Temperature {
 
     static void checkExtruderAutoFans();
 
-    #if ENABLED(HAS_HOTEND)
+    #if HAS_HOTEND
       static float get_pid_output_hotend(const uint8_t e);
     #endif
     #if ENABLED(PIDTEMPBED)

Marlin/src/pins/ramps/pins_DAGOMA_F5.h

@@ -51,7 +51,7 @@
 //
 // DAC steppers
 //
-#define HAS_MOTOR_CURRENT_DAC
+#define HAS_MOTOR_CURRENT_DAC 1
 
 #define DAC_STEPPER_ORDER { 0, 1, 2, 3 }
 

Marlin/src/pins/ramps/pins_RIGIDBOARD_V2.h

@@ -34,7 +34,7 @@
 //
 
 // I2C based DAC like on the Printrboard REVF
-#define HAS_MOTOR_CURRENT_DAC
+#define HAS_MOTOR_CURRENT_DAC 1
 
 // Channels available for DAC, For Rigidboard there are 4
 #define DAC_STEPPER_ORDER { 0, 1, 2, 3 }

Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h

@@ -141,7 +141,7 @@
 #endif // NO_EXTRUDRBOARD
 
 // Enable control of stepper motor currents with the I2C based MCP4728 DAC used on Printrboard REVF
-#define HAS_MOTOR_CURRENT_DAC
+#define HAS_MOTOR_CURRENT_DAC 1
 
 // Set default drive strength percents if not already defined - X, Y, Z, E axis
 #ifndef DAC_MOTOR_CURRENT_DEFAULT

Marlin/src/sd/cardreader.cpp

@@ -1123,7 +1123,7 @@ void CardReader::cdroot() {
           #if DISABLED(SDSORT_USES_RAM)
             selectFileByIndex(o1);              // Pre-fetch the first entry and save it
             strcpy(name1, longest_filename());  // so the loop only needs one fetch
-            #if ENABLED(HAS_FOLDER_SORTING)
+            #if HAS_FOLDER_SORTING
               bool dir1 = flag.filenameIsDir;
             #endif
           #endif