LCD SD Card items near top when not using wheel (#12926)

Marlin/src/gcode/sdcard/M20-M30_M32-M34_M524_M928.cpp

@@ -103,11 +103,11 @@ void GcodeSuite::M24() {
     print_job_timer.start();
   }
 
-  ui.reset_status();
-
   #ifdef ACTION_ON_RESUME
     SERIAL_ECHOLNPGM("//action:" ACTION_ON_RESUME);
   #endif
+  
+  ui.reset_status();
 }
 
 /**

Marlin/src/lcd/language/language_en.h

@@ -810,6 +810,9 @@
 #ifndef MSG_SINGLENOZZLE_RETRACT_SPD
   #define MSG_SINGLENOZZLE_RETRACT_SPD        _UxGT("Retract Speed")
 #endif
+#ifndef MSG_NOZZLE_STANDBY
+  #define MSG_NOZZLE_STANDBY                  _UxGT("Nozzle Standby")
+#endif
 #ifndef MSG_FILAMENTCHANGE
   #define MSG_FILAMENTCHANGE                  _UxGT("Change filament")
 #endif

Marlin/src/lcd/menu/menu_main.cpp

@@ -104,9 +104,36 @@ void menu_main() {
       if (card.isFileOpen())
         MENU_ITEM(submenu, MSG_STOP_PRINT, menu_sdcard_abort_confirm);
     #endif
+    #if !defined(ACTION_ON_RESUME) && ENABLED(SDSUPPORT)
+      if (card.isFileOpen())
+    #endif
     MENU_ITEM(submenu, MSG_TUNE, menu_tune);
   }
   else {
+    #if !HAS_ENCODER_WHEEL && ENABLED(SDSUPPORT)
+      //
+      // Autostart
+      //
+      #if ENABLED(MENU_ADDAUTOSTART)
+        if (!busy) MENU_ITEM(function, MSG_AUTOSTART, card.beginautostart);
+      #endif
+
+      if (card.isDetected()) {
+        if (!card.isFileOpen()) {
+          MENU_ITEM(submenu, MSG_CARD_MENU, menu_sdcard);
+          #if !PIN_EXISTS(SD_DETECT)
+            MENU_ITEM(gcode, MSG_CHANGE_SDCARD, PSTR("M21"));  // SD-card changed by user
+          #endif
+        }
+      }
+      else {
+        #if !PIN_EXISTS(SD_DETECT)
+          MENU_ITEM(gcode, MSG_INIT_SDCARD, PSTR("M21")); // Manually init SD-card
+        #endif
+        MENU_ITEM(function, MSG_NO_CARD, NULL);
+      }
+    #endif // !HAS_ENCODER_WHEEL && SDSUPPORT
+
     MENU_ITEM(function, MSG_RESUME_PRINT, lcd_resume);
     
     MENU_ITEM(submenu, MSG_MOTION, menu_motion);
@@ -148,14 +175,12 @@ void menu_main() {
       MENU_ITEM(gcode, MSG_SWITCH_PS_ON, PSTR("M80"));
   #endif
 
-  #if ENABLED(SDSUPPORT)
-
+  #if HAS_ENCODER_WHEEL && ENABLED(SDSUPPORT)
     //
     // Autostart
     //
     #if ENABLED(MENU_ADDAUTOSTART)
-      if (!busy)
-        MENU_ITEM(function, MSG_AUTOSTART, card.beginautostart);
+      if (!busy) MENU_ITEM(function, MSG_AUTOSTART, card.beginautostart);
     #endif
 
     if (card.isDetected()) {
@@ -172,7 +197,7 @@ void menu_main() {
       #endif
       MENU_ITEM(function, MSG_NO_CARD, NULL);
     }
-  #endif // SDSUPPORT
+  #endif // HAS_ENCODER_WHEEL && SDSUPPORT
 
   END_MENU();
 }

Marlin/src/lcd/menu/menu_temperature.cpp

@@ -31,10 +31,14 @@
 #include "menu.h"
 #include "../../module/temperature.h"
 
-#if FAN_COUNT > 1
+#if FAN_COUNT > 1 || ENABLED(SINGLENOZZLE)
   #include "../../module/motion.h"
 #endif
 
+#if ENABLED(SINGLENOZZLE)
+  #include "../../module/tool_change.h"
+#endif
+
 // Initialized by settings.load()
 int16_t MarlinUI::preheat_hotend_temp[2], MarlinUI::preheat_bed_temp[2];
 uint8_t MarlinUI::preheat_fan_speed[2];
@@ -327,6 +331,10 @@ void menu_temperature() {
     #endif // HOTENDS > 2
   #endif // HOTENDS > 1
 
+  #if ENABLED(SINGLENOZZLE)
+    MENU_MULTIPLIER_ITEM_EDIT(uint16_3, MSG_NOZZLE_STANDBY, &singlenozzle_temp[active_extruder ? 0 : 1], 0, HEATER_0_MAXTEMP - 15);
+  #endif
+
   //
   // Bed:
   //

Marlin/src/lcd/menu/menu_tune.cpp

@@ -38,6 +38,10 @@
   #include "../../feature/bedlevel/bedlevel.h"
 #endif
 
+#if ENABLED(SINGLENOZZLE)
+  #include "../../module/tool_change.h"
+#endif
+
 // Refresh the E factor after changing flow
 void _lcd_refresh_e_factor_0() { planner.refresh_e_factor(0); }
 #if EXTRUDERS > 1
@@ -129,6 +133,10 @@ void menu_tune() {
     #endif // HOTENDS > 2
   #endif // HOTENDS > 1
 
+  #if ENABLED(SINGLENOZZLE)
+    MENU_MULTIPLIER_ITEM_EDIT(uint16_3, MSG_NOZZLE_STANDBY, &singlenozzle_temp[active_extruder ? 0 : 1], 0, HEATER_0_MAXTEMP - 15);
+  #endif
+
   //
   // Bed:
   //