Browse Source

Move M702 MK2_MULTIPLEXER to cpp

pull/1/head
Scott Lahteine 7 years ago
parent
commit
75cf17d816
  1. 4
      Marlin/src/Marlin.cpp
  2. 38
      Marlin/src/feature/snmm.cpp
  3. 28
      Marlin/src/feature/snmm.h
  4. 20
      Marlin/src/gcode/feature/snmm/M702.cpp
  5. 5
      Marlin/src/gcode/gcode.cpp
  6. 4
      Marlin/src/module/tool_change.cpp

4
Marlin/src/Marlin.cpp

@ -359,10 +359,6 @@ void quickstop_stepper() {
SYNC_PLAN_POSITION_KINEMATIC(); SYNC_PLAN_POSITION_KINEMATIC();
} }
#if ENABLED(MK2_MULTIPLEXER)
#include "gcode/feature/snmm/M702.h"
#endif
#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE) #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
#include "gcode/control/M605.h" #include "gcode/control/M605.h"
#endif #endif

38
Marlin/src/feature/snmm.cpp

@ -0,0 +1,38 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../inc/MarlinConfig.h"
#if ENABLED(MK2_MULTIPLEXER)
#include "../module/stepper.h"
void select_multiplexed_stepper(const uint8_t e) {
stepper.synchronize();
disable_e_steppers();
WRITE(E_MUX0_PIN, TEST(e, 0) ? HIGH : LOW);
WRITE(E_MUX1_PIN, TEST(e, 1) ? HIGH : LOW);
WRITE(E_MUX2_PIN, TEST(e, 2) ? HIGH : LOW);
safe_delay(100);
}
#endif // MK2_MULTIPLEXER

28
Marlin/src/feature/snmm.h

@ -0,0 +1,28 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef __SNMM_H__
#define __SNMM_H__
void select_multiplexed_stepper(const uint8_t e);
#endif // __SNMM_H__

20
Marlin/src/gcode/feature/snmm/M702.h → Marlin/src/gcode/feature/snmm/M702.cpp

@ -20,21 +20,19 @@
* *
*/ */
inline void select_multiplexed_stepper(const uint8_t e) { #include "../../../inc/MarlinConfig.h"
stepper.synchronize();
disable_e_steppers(); #if ENABLED(MK2_MULTIPLEXER)
WRITE(E_MUX0_PIN, TEST(e, 0) ? HIGH : LOW);
WRITE(E_MUX1_PIN, TEST(e, 1) ? HIGH : LOW); #include "../../gcode.h"
WRITE(E_MUX2_PIN, TEST(e, 2) ? HIGH : LOW); #include "../../../feature/snmm.h"
safe_delay(100);
}
/** /**
* M702: Unload all extruders * M702: Unload all extruders
*/ */
void gcode_M702() { void GcodeSuite::M702() {
for (uint8_t s = 0; s < E_STEPPERS; s++) { for (uint8_t s = 0; s < E_STEPPERS; s++) {
select_multiplexed_stepper(e); select_multiplexed_stepper(s);
// TODO: standard unload filament function // TODO: standard unload filament function
// MK2 firmware behavior: // MK2 firmware behavior:
// - Make sure temperature is high enough // - Make sure temperature is high enough
@ -48,3 +46,5 @@ void gcode_M702() {
select_multiplexed_stepper(active_extruder); select_multiplexed_stepper(active_extruder);
disable_e_steppers(); disable_e_steppers();
} }
#endif // MK2_MULTIPLEXER

5
Marlin/src/gcode/gcode.cpp

@ -123,7 +123,6 @@ extern void gcode_M350();
extern void gcode_M351(); extern void gcode_M351();
extern void gcode_M355(); extern void gcode_M355();
extern void gcode_M605(); extern void gcode_M605();
extern void gcode_M702();
extern void gcode_M900(); extern void gcode_M900();
extern void gcode_M906(); extern void gcode_M906();
extern void gcode_M911(); extern void gcode_M911();
@ -658,9 +657,7 @@ void GcodeSuite::process_next_command() {
#endif // DUAL_X_CARRIAGE #endif // DUAL_X_CARRIAGE
#if ENABLED(MK2_MULTIPLEXER) #if ENABLED(MK2_MULTIPLEXER)
case 702: // M702: Unload all extruders case 702: M702(); break; // M702: Unload all extruders
gcode_M702();
break;
#endif #endif
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)

4
Marlin/src/module/tool_change.cpp

@ -38,6 +38,10 @@
#include "../feature/solenoid.h" #include "../feature/solenoid.h"
#endif #endif
#if ENABLED(MK2_MULTIPLEXER)
#include "../feature/snmm.h"
#endif
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#if EXTRUDERS > 3 #if EXTRUDERS > 3

Loading…
Cancel
Save