andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1

pull/1/head
Daid 13 years ago
parent
279d00da9f e31bef31ad
commit
7244aa7eb7
9 changed files with 96 additions and 74 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 1
      Marlin/Configuration.h
  2. 5
      Marlin/Marlin.pde
  3. 14
      Marlin/pins.h
  4. 22
      Marlin/planner.cpp
  5. 8
      Marlin/planner.h
  6. 10
      Marlin/temperature.cpp
  7. 10
      Marlin/ultralcd.h
  8. 95
      Marlin/ultralcd.pde
  9. 3
      README.md

1
Marlin/Configuration.h
View File

@ -26,6 +26,7 @@
// Gen6 = 5
// Gen6 deluxe = 51
// Sanguinololu 1.2 and above = 62
// Melzi = 63
// Ultimaker = 7
// Teensylu = 8
// Gen3+ =9

5
Marlin/Marlin.pde
View File

@ -300,6 +300,8 @@ void setup()
st_init(); // Initialize stepper;
wd_init();
setup_photpin();
LCD_INIT;
}
@ -687,7 +689,6 @@ void process_commands()
st_synchronize();
for(int8_t i=0; i < NUM_AXIS; i++) {
if(code_seen(axis_codes[i])) {
current_position[i] = code_value()+add_homeing[i];
if(i == E_AXIS) {
current_position[i] = code_value();
plan_set_e_position(current_position[E_AXIS]);
@ -1246,7 +1247,7 @@ void process_commands()
}
break;
case 302: // finish all moves
case 302: // allow cold extrudes
{
allow_cold_extrudes(true);
}

14
Marlin/pins.h
View File

@ -554,7 +554,10 @@
* Sanguinololu pin assignment
*
****************************************************************************************/
#if MOTHERBOARD == 62
#if MOTHERBOARD == 63
#define MELZI
#endif
#if MOTHERBOARD == 62 || MOTHERBOARD == 63
#undef MOTHERBOARD
#define MOTHERBOARD 6
#define SANGUINOLOLU_V_1_2
@ -589,6 +592,11 @@
#define FAN_PIN -1
#ifdef MELZI
#define LED_PIN 28
#define FAN_PIN 4
#endif
#define PS_ON_PIN -1
#define KILL_PIN -1
@ -621,6 +629,10 @@
#define SDPOWER -1
#define SDSS 31
#ifdef MELZI
#define SDSS 24
#endif
#endif

22
Marlin/planner.cpp
View File

@ -556,8 +556,8 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa
delta_mm[Y_AXIS] = (target[Y_AXIS]-position[Y_AXIS])/axis_steps_per_unit[Y_AXIS];
delta_mm[Z_AXIS] = (target[Z_AXIS]-position[Z_AXIS])/axis_steps_per_unit[Z_AXIS];
delta_mm[E_AXIS] = ((target[E_AXIS]-position[E_AXIS])/axis_steps_per_unit[E_AXIS])*extrudemultiply/100.0;
if ( block->steps_x == 0 && block->steps_y == 0 && block->steps_z == 0 ) {
block->millimeters = abs(delta_mm[E_AXIS]);
if ( block->steps_x <=dropsegments && block->steps_y <=dropsegments && block->steps_z <=dropsegments ) {
block->millimeters = fabs(delta_mm[E_AXIS]);
} else {
block->millimeters = sqrt(square(delta_mm[X_AXIS]) + square(delta_mm[Y_AXIS]) + square(delta_mm[Z_AXIS]));
}
@ -593,8 +593,8 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa
float speed_factor = 1.0; //factor <=1 do decrease speed
for(int i=0; i < 4; i++) {
current_speed[i] = delta_mm[i] * inverse_second;
if(abs(current_speed[i]) > max_feedrate[i])
speed_factor = min(speed_factor, max_feedrate[i] / abs(current_speed[i]));
if(fabs(current_speed[i]) > max_feedrate[i])
speed_factor = min(speed_factor, max_feedrate[i] / fabs(current_speed[i]));
}
// Max segement time in us.
@ -698,25 +698,25 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa
#endif
// Start with a safe speed
float vmax_junction = max_xy_jerk/2;
if(abs(current_speed[Z_AXIS]) > max_z_jerk/2)
if(fabs(current_speed[Z_AXIS]) > max_z_jerk/2)
vmax_junction = max_z_jerk/2;
vmax_junction = min(vmax_junction, block->nominal_speed);
if(abs(current_speed[E_AXIS]) > max_e_jerk/2)
if(fabs(current_speed[E_AXIS]) > max_e_jerk/2)
vmax_junction = min(vmax_junction, max_e_jerk/2);
if ((moves_queued > 1) && (previous_nominal_speed > 0.0001)) {
float jerk = sqrt(pow((current_speed[X_AXIS]-previous_speed[X_AXIS]), 2)+pow((current_speed[Y_AXIS]-previous_speed[Y_AXIS]), 2));
if((abs(previous_speed[X_AXIS]) > 0.0001) || (abs(previous_speed[Y_AXIS]) > 0.0001)) {
if((fabs(previous_speed[X_AXIS]) > 0.0001) || (fabs(previous_speed[Y_AXIS]) > 0.0001)) {
vmax_junction = block->nominal_speed;
}
if (jerk > max_xy_jerk) {
vmax_junction *= (max_xy_jerk/jerk);
}
if(abs(current_speed[Z_AXIS] - previous_speed[Z_AXIS]) > max_z_jerk) {
vmax_junction *= (max_z_jerk/abs(current_speed[Z_AXIS] - previous_speed[Z_AXIS]));
if(fabs(current_speed[Z_AXIS] - previous_speed[Z_AXIS]) > max_z_jerk) {
vmax_junction *= (max_z_jerk/fabs(current_speed[Z_AXIS] - previous_speed[Z_AXIS]));
}
if(abs(current_speed[E_AXIS] - previous_speed[E_AXIS]) > max_e_jerk) {
vmax_junction *= (max_e_jerk/abs(current_speed[E_AXIS] - previous_speed[E_AXIS]));
if(fabs(current_speed[E_AXIS] - previous_speed[E_AXIS]) > max_e_jerk) {
vmax_junction *= (max_e_jerk/fabs(current_speed[E_AXIS] - previous_speed[E_AXIS]));
}
}
block->max_entry_speed = vmax_junction;

8
Marlin/planner.h
View File

@ -45,10 +45,10 @@ typedef struct {
#endif
// Fields used by the motion planner to manage acceleration
// float speed_x, speed_y, speed_z, speed_e; // Nominal mm/minute for each axis
float nominal_speed; // The nominal speed for this block in mm/min
float entry_speed; // Entry speed at previous-current junction in mm/min
float max_entry_speed; // Maximum allowable junction entry speed in mm/min
// float speed_x, speed_y, speed_z, speed_e; // Nominal mm/sec for each axis
float nominal_speed; // The nominal speed for this block in mm/sec
float entry_speed; // Entry speed at previous-current junction in mm/sec
float max_entry_speed; // Maximum allowable junction entry speed in mm/sec
float millimeters; // The total travel of this block in mm
float acceleration; // acceleration mm/sec^2
unsigned char recalculate_flag; // Planner flag to recalculate trapezoids on entry junction

10
Marlin/temperature.cpp
View File

@ -134,8 +134,8 @@ void PID_autotune(float temp)
long t_high;
long t_low;
long bias=127;
long d = 127;
long bias=PID_MAX/2;
long d = PID_MAX/2;
float Ku, Tu;
float Kp, Ki, Kd;
float max, min;
@ -144,7 +144,7 @@ void PID_autotune(float temp)
disable_heater(); // switch off all heaters.
soft_pwm[0] = 255>>1;
soft_pwm[0] = PID_MAX/2;
for(;;) {
@ -172,8 +172,8 @@ void PID_autotune(float temp)
t_low=t2 - t1;
if(cycles > 0) {
bias += (d*(t_high - t_low))/(t_low + t_high);
bias = constrain(bias, 20 ,235);
if(bias > 127) d = 254 - bias;
bias = constrain(bias, 20 ,PID_MAX-20);
if(bias > PID_MAX/2) d = PID_MAX - 1 - bias;
else d = bias;
SERIAL_PROTOCOLPGM(" bias: "); SERIAL_PROTOCOL(bias);

10
Marlin/ultralcd.h
View File

@ -7,6 +7,7 @@
void lcd_init();
void lcd_status(const char* message);
void beep();
void buttons_init();
void buttons_check();
#define LCD_UPDATE_INTERVAL 100
@ -69,7 +70,7 @@
void showAxisMove();
void showSD();
bool force_lcd_update;
int lastencoderpos;
long lastencoderpos;
int8_t lineoffset;
int8_t lastlineoffset;
@ -78,11 +79,11 @@
bool tune;
private:
FORCE_INLINE void updateActiveLines(const uint8_t &maxlines,volatile int &encoderpos)
FORCE_INLINE void updateActiveLines(const uint8_t &maxlines,volatile long &encoderpos)
{
if(linechanging) return; // an item is changint its value, do not switch lines hence
lastlineoffset=lineoffset;
int curencoderpos=encoderpos;
long curencoderpos=encoderpos;
force_lcd_update=false;
if( (abs(curencoderpos-lastencoderpos)<lcdslow) )
{
@ -134,11 +135,12 @@
char *ftostr3(const float &x);
#define LCD_INIT lcd_init();
#define LCD_MESSAGE(x) lcd_status(x);
#define LCD_MESSAGEPGM(x) lcd_statuspgm(MYPGM(x));
#define LCD_STATUS lcd_status()
#else //no lcd
#define LCD_INIT
#define LCD_STATUS
#define LCD_MESSAGE(x)
#define LCD_MESSAGEPGM(x)

95
Marlin/ultralcd.pde
View File

@ -3,6 +3,9 @@
#include "ultralcd.h"
#ifdef ULTRA_LCD
#include "Marlin.h"
#include "language.h"
#include "temperature.h"
#include "EEPROMwrite.h"
#include <LiquidCrystal.h>
//===========================================================================
//=============================imported variables============================
@ -15,6 +18,7 @@ extern volatile int extrudemultiply;
extern long position[4];
#ifdef SDSUPPORT
#include "cardreader.h"
extern CardReader card;
#endif
@ -22,7 +26,7 @@ extern CardReader card;
//=============================public variables============================
//===========================================================================
volatile char buttons=0; //the last checked buttons in a bit array.
int encoderpos=0;
long encoderpos=0;
short lastenc=0;
@ -97,6 +101,9 @@ FORCE_INLINE void clear()
void lcd_init()
{
//beep();
#ifdef ULTIPANEL
buttons_init();
#endif
byte Degree[8] =
{
@ -304,10 +311,6 @@ MainMenu::MainMenu()
displayStartingRow=0;
activeline=0;
force_lcd_update=true;
#ifdef ULTIPANEL
buttons_init();
#endif
lcd_init();
linechanging=false;
tune=false;
}
@ -884,7 +887,7 @@ void MainMenu::showTune()
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_FLOW);
lcd.setCursor(13,line);lcd.print(itostr4(axis_steps_per_unit[3]));
lcd.setCursor(13,line);lcd.print(ftostr52(axis_steps_per_unit[E_AXIS]));
}
if((activeline!=line) )
@ -895,14 +898,14 @@ void MainMenu::showTune()
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)axis_steps_per_unit[3];
encoderpos=(long)(axis_steps_per_unit[E_AXIS]*100.0);
}
else
{
float factor=float(encoderpos)/float(axis_steps_per_unit[3]);
float factor=float(encoderpos)/100.0/float(axis_steps_per_unit[E_AXIS]);
position[E_AXIS]=lround(position[E_AXIS]*factor);
//current_position[3]*=factor;
axis_steps_per_unit[E_AXIS]= encoderpos;
//current_position[E_AXIS]*=factor;
axis_steps_per_unit[E_AXIS]= encoderpos/100.0;
encoderpos=activeline*lcdslow;
}
@ -912,8 +915,8 @@ void MainMenu::showTune()
if(linechanging)
{
if(encoderpos<5) encoderpos=5;
if(encoderpos>9999) encoderpos=9999;
lcd.setCursor(13,line);lcd.print(itostr4(encoderpos));
if(encoderpos>999999) encoderpos=999999;
lcd.setCursor(13,line);lcd.print(ftostr52(encoderpos/100.0));
}
}break;
@ -1296,7 +1299,7 @@ void MainMenu::showControlTemp()
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)Kp;
encoderpos=(long)Kp;
}
else
{
@ -1331,7 +1334,7 @@ void MainMenu::showControlTemp()
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)(Ki*10/PID_dT);
encoderpos=(long)(Ki*10/PID_dT);
}
else
{
@ -1367,7 +1370,7 @@ void MainMenu::showControlTemp()
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)(Kd/5./PID_dT);
encoderpos=(long)(Kd/5./PID_dT);
}
else
{
@ -1403,7 +1406,7 @@ void MainMenu::showControlTemp()
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)Kc;
encoderpos=(long)Kc;
}
else
{
@ -1476,7 +1479,7 @@ void MainMenu::showControlMotion()
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)acceleration/100;
encoderpos=(long)acceleration/100;
}
else
{
@ -1510,7 +1513,7 @@ void MainMenu::showControlMotion()
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)max_xy_jerk;
encoderpos=(long)max_xy_jerk;
}
else
{
@ -1553,7 +1556,7 @@ void MainMenu::showControlMotion()
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)max_feedrate[i-ItemCM_vmaxx];
encoderpos=(long)max_feedrate[i-ItemCM_vmaxx];
}
else
{
@ -1589,7 +1592,7 @@ void MainMenu::showControlMotion()
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)(minimumfeedrate);
encoderpos=(long)(minimumfeedrate);
}
else
{
@ -1624,7 +1627,7 @@ void MainMenu::showControlMotion()
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)mintravelfeedrate;
encoderpos=(long)mintravelfeedrate;
}
else
{
@ -1667,7 +1670,7 @@ void MainMenu::showControlMotion()
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)max_acceleration_units_per_sq_second[i-ItemCM_amaxx]/100;
encoderpos=(long)max_acceleration_units_per_sq_second[i-ItemCM_amaxx]/100;
}
else
{
@ -1701,7 +1704,7 @@ void MainMenu::showControlMotion()
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)retract_acceleration/100;
encoderpos=(long)retract_acceleration/100;
}
else
{
@ -1725,7 +1728,7 @@ void MainMenu::showControlMotion()
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_XSTEPS);
lcd.setCursor(11,line);lcd.print(ftostr52(axis_steps_per_unit[0]));
lcd.setCursor(11,line);lcd.print(ftostr52(axis_steps_per_unit[X_AXIS]));
}
if((activeline!=line) )
@ -1736,13 +1739,13 @@ void MainMenu::showControlMotion()
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)(axis_steps_per_unit[0]*100.0);
encoderpos=(long)(axis_steps_per_unit[X_AXIS]*100.0);
}
else
{
float factor=float(encoderpos)/100.0/float(axis_steps_per_unit[0]);
float factor=float(encoderpos)/100.0/float(axis_steps_per_unit[X_AXIS]);
position[X_AXIS]=lround(position[X_AXIS]*factor);
//current_position[3]*=factor;
//current_position[X_AXIS]*=factor;
axis_steps_per_unit[X_AXIS]= encoderpos/100.0;
encoderpos=activeline*lcdslow;
}
@ -1752,7 +1755,7 @@ void MainMenu::showControlMotion()
if(linechanging)
{
if(encoderpos<5) encoderpos=5;
if(encoderpos>32000) encoderpos=32000;//TODO: This is a problem, encoderpos is 16bit, but steps_per_unit for e can be wel over 800
if(encoderpos>999999) encoderpos=999999;
lcd.setCursor(11,line);lcd.print(ftostr52(encoderpos/100.0));
}
@ -1762,7 +1765,7 @@ void MainMenu::showControlMotion()
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_YSTEPS);
lcd.setCursor(11,line);lcd.print(ftostr52(axis_steps_per_unit[1]));
lcd.setCursor(11,line);lcd.print(ftostr52(axis_steps_per_unit[Y_AXIS]));
}
if((activeline!=line) )
@ -1773,13 +1776,13 @@ void MainMenu::showControlMotion()
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)(axis_steps_per_unit[1]*100.0);
encoderpos=(long)(axis_steps_per_unit[Y_AXIS]*100.0);
}
else
{
float factor=float(encoderpos)/100.0/float(axis_steps_per_unit[1]);
float factor=float(encoderpos)/100.0/float(axis_steps_per_unit[Y_AXIS]);
position[Y_AXIS]=lround(position[Y_AXIS]*factor);
//current_position[3]*=factor;
//current_position[Y_AXIS]*=factor;
axis_steps_per_unit[Y_AXIS]= encoderpos/100.0;
encoderpos=activeline*lcdslow;
@ -1790,7 +1793,7 @@ void MainMenu::showControlMotion()
if(linechanging)
{
if(encoderpos<5) encoderpos=5;
if(encoderpos>9999) encoderpos=9999;
if(encoderpos>999999) encoderpos=999999;
lcd.setCursor(11,line);lcd.print(ftostr52(encoderpos/100.0));
}
@ -1800,7 +1803,7 @@ void MainMenu::showControlMotion()
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_ZSTEPS);
lcd.setCursor(11,line);lcd.print(ftostr52(axis_steps_per_unit[2]));
lcd.setCursor(11,line);lcd.print(ftostr52(axis_steps_per_unit[Z_AXIS]));
}
if((activeline!=line) )
@ -1811,13 +1814,13 @@ void MainMenu::showControlMotion()
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)(axis_steps_per_unit[2]*100.0);
encoderpos=(long)(axis_steps_per_unit[Z_AXIS]*100.0);
}
else
{
float factor=float(encoderpos)/100.0/float(axis_steps_per_unit[2]);
float factor=float(encoderpos)/100.0/float(axis_steps_per_unit[Z_AXIS]);
position[Z_AXIS]=lround(position[Z_AXIS]*factor);
//current_position[3]*=factor;
//current_position[Z_AXIS]*=factor;
axis_steps_per_unit[Z_AXIS]= encoderpos/100.0;
encoderpos=activeline*lcdslow;
@ -1828,7 +1831,7 @@ void MainMenu::showControlMotion()
if(linechanging)
{
if(encoderpos<5) encoderpos=5;
if(encoderpos>9999) encoderpos=9999;
if(encoderpos>999999) encoderpos=999999;
lcd.setCursor(11,line);lcd.print(ftostr52(encoderpos/100.0));
}
@ -1839,7 +1842,7 @@ void MainMenu::showControlMotion()
if(force_lcd_update)
{
lcd.setCursor(0,line);lcdprintPGM(MSG_ESTEPS);
lcd.setCursor(11,line);lcd.print(ftostr52(axis_steps_per_unit[3]));
lcd.setCursor(11,line);lcd.print(ftostr52(axis_steps_per_unit[E_AXIS]));
}
if((activeline!=line) )
@ -1850,13 +1853,13 @@ void MainMenu::showControlMotion()
linechanging=!linechanging;
if(linechanging)
{
encoderpos=(int)(axis_steps_per_unit[3]*100.0);
encoderpos=(long)(axis_steps_per_unit[E_AXIS]*100.0);
}
else
{
float factor=float(encoderpos)/100.0/float(axis_steps_per_unit[3]);
float factor=float(encoderpos)/100.0/float(axis_steps_per_unit[E_AXIS]);
position[E_AXIS]=lround(position[E_AXIS]*factor);
//current_position[3]*=factor;
//current_position[E_AXIS]*=factor;
axis_steps_per_unit[E_AXIS]= encoderpos/100.0;
encoderpos=activeline*lcdslow;
@ -1867,7 +1870,7 @@ void MainMenu::showControlMotion()
if(linechanging)
{
if(encoderpos<5) encoderpos=5;
if(encoderpos>9999) encoderpos=9999;
if(encoderpos>999999) encoderpos=999999;
lcd.setCursor(11,line);lcd.print(ftostr52(encoderpos/100.0));
}
@ -2108,9 +2111,10 @@ void MainMenu::showMainMenu()
}
}
clearIfNecessary();
for(int8_t line=0;line<LCD_HEIGHT;line++)
uint8_t line=0;
for(int8_t i=lineoffset;i<lineoffset+LCD_HEIGHT;i++)
{
switch(line)
switch(i)
{
case ItemM_watch:
MENUITEM( lcdprintPGM(MSG_WATCH) , BLOCK;status=Main_Status;beepshort(); ) ;
@ -2164,6 +2168,7 @@ void MainMenu::showMainMenu()
SERIAL_ERRORLNPGM(MSG_SERIAL_ERROR_MENU_STRUCTURE);
break;
}
line++;
}
updateActiveLines(3,encoderpos);
}

3
README.md
View File

@ -161,7 +161,8 @@ Advance:
EEPROM:
* M500 - stores paramters in EEPROM
* M500 - stores paramters in EEPROM. This parameters are stored: axis_steps_per_unit, max_feedrate, max_acceleration ,acceleration,retract_acceleration,
minimumfeedrate,mintravelfeedrate,minsegmenttime, jerk velocities, PID
* M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
* M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
* M503 - print the current settings (from memory not from eeprom)

Write Preview
Loading…
Cancel
Save