Browse Source

updated compilation/configuring instructions

pull/1/head
Steffen Vogel 10 years ago
parent
commit
6f137bbe3e
  1. 39
      Documentation/Compilation.md

39
Documentation/Compilation.md

@ -1,29 +1,16 @@
Configuring and compilation:
# Configuring and compilation
Install the latest non-beta arduino software IDE/toolset
http://www.arduino.cc/en/Main/Software
Download the Marlin firmware
https://github.com/MarlinFirmware/Marlin/tree/development
For the latest development, or
For the latest stable release
In both cases use the "Download Zip" button on the right.
For some spec. boards a spec. dir in the ArduinoAddons directory in the Marlin dir needs to be copied to the arduino environment. <arduino home>\hardware\
Start the arduino IDE.
Select Tools -> Board -> Arduino Mega 2560 or your microcontroller
Select the correct serial port in Tools ->Serial Port
Open Marlin.pde or .ino
Click the Verify/Compile button
Click the Upload button
If all goes well the firmware is uploading
1. Install the latest non-beta arduino software IDE/toolset: http://www.arduino.cc/en/Main/Software
2. Download the Marlin firmware
- [Latest developement version](https://github.com/MarlinFirmware/Marlin/tree/Development)
- [Stable version](https://github.com/MarlinFirmware/Marlin/tree/Development)
3. In both cases use the "Download Zip" button on the right.
4. Some boards require special files and/or libraries from the ArduinoAddons directory. Take a look at the dedicated [README](/ArduinoAddons/README.md) for details.
5. Start the arduino IDE.
6. Select Tools -> Board -> Arduino Mega 2560 or your microcontroller
7. Select the correct serial port in Tools ->Serial Port
8. Open Marlin.pde or .ino
9. Click the Verify/Compile button
10. Click the Upload button. If all goes well the firmware is uploading
That's ok. Enjoy Silky Smooth Printing.
Loading…
Cancel
Save