From 6f137bbe3e809e4b45fbe87035cc8796063130e4 Mon Sep 17 00:00:00 2001 From: Steffen Vogel Date: Thu, 8 Jan 2015 18:21:54 +0100 Subject: [PATCH] updated compilation/configuring instructions --- Documentation/Compilation.md | 39 ++++++++++++------------------------ 1 file changed, 13 insertions(+), 26 deletions(-) diff --git a/Documentation/Compilation.md b/Documentation/Compilation.md index f36c7d88ff..56b4f356ca 100644 --- a/Documentation/Compilation.md +++ b/Documentation/Compilation.md @@ -1,29 +1,16 @@ -Configuring and compilation: +# Configuring and compilation -Install the latest non-beta arduino software IDE/toolset - http://www.arduino.cc/en/Main/Software - -Download the Marlin firmware - https://github.com/MarlinFirmware/Marlin/tree/development - - For the latest development, or - - - - For the latest stable release - - In both cases use the "Download Zip" button on the right. - -For some spec. boards a spec. dir in the ArduinoAddons directory in the Marlin dir needs to be copied to the arduino environment. \hardware\ - -Start the arduino IDE. -Select Tools -> Board -> Arduino Mega 2560 or your microcontroller -Select the correct serial port in Tools ->Serial Port -Open Marlin.pde or .ino - -Click the Verify/Compile button - -Click the Upload button -If all goes well the firmware is uploading + 1. Install the latest non-beta arduino software IDE/toolset: http://www.arduino.cc/en/Main/Software + 2. Download the Marlin firmware + - [Latest developement version](https://github.com/MarlinFirmware/Marlin/tree/Development) + - [Stable version](https://github.com/MarlinFirmware/Marlin/tree/Development) + 3. In both cases use the "Download Zip" button on the right. + 4. Some boards require special files and/or libraries from the ArduinoAddons directory. Take a look at the dedicated [README](/ArduinoAddons/README.md) for details. + 5. Start the arduino IDE. + 6. Select Tools -> Board -> Arduino Mega 2560 or your microcontroller + 7. Select the correct serial port in Tools ->Serial Port + 8. Open Marlin.pde or .ino + 9. Click the Verify/Compile button + 10. Click the Upload button. If all goes well the firmware is uploading That's ok. Enjoy Silky Smooth Printing. \ No newline at end of file