Browse Source

Simplify pins_TRIGORILLA_14.h (#12162)

pull/1/head
Hannes Brandstätter-Müller 6 years ago
committed by Scott Lahteine
parent
commit
6ee2af5e2d
  1. 40
      Marlin/src/pins/pins_TRIGORILLA_14.h

40
Marlin/src/pins/pins_TRIGORILLA_14.h

@ -28,20 +28,44 @@
#define BOARD_NAME "Anycubic RAMPS 1.4"
#endif
// Remap MOSFET pins to common usages
#if HOTENDS > 1
#define RAMPS_D9_PIN 45 // EEB, EEF
// Labeled pins
#define TRIGORILLA_HEATER_BED_PIN 8
#define TRIGORILLA_HEATER_0_PIN 10
#define TRIGORILLA_HEATER_1_PIN 45 // Anycubic Kossel: Unused
#define TRIGORILLA_FAN0_PIN 9 // Anycubic Kossel: Usually the part cooling fan
#define TRIGORILLA_FAN1_PIN 7 // Anycubic Kossel: Unused
#define TRIGORILLA_FAN2_PIN 44 // Anycubic Kossel: Hotend fan
// Remap MOSFET pins to common usages:
#define RAMPS_D10_PIN TRIGORILLA_HEATER_0_PIN // HEATER_0_PIN is always RAMPS_D10_PIN in pins_RAMPS.h
#if HOTENDS > 1 // EEF and EEB
#define RAMPS_D9_PIN TRIGORILLA_HEATER_1_PIN
#if !TEMP_SENSOR_BED
#define RAMPS_D8_PIN 9 // EEF
// EEF
#define RAMPS_D8_PIN TRIGORILLA_FAN0_PIN
#else
// EEB
#define RAMPS_D8_PIN TRIGORILLA_HEATER_BED_PIN
#define FAN_PIN TRIGORILLA_FAN0_PIN // Override pin 4 in pins_RAMPS.h
#endif
#elif TEMP_SENSOR_BED
#define FAN1_PIN 7 // EFB
// EFB (Anycubic Kossel default)
#define RAMPS_D9_PIN TRIGORILLA_FAN0_PIN
#define RAMPS_D8_PIN TRIGORILLA_HEATER_BED_PIN
#else
#define FAN2_PIN 44 // EFF
// EFF
#define RAMPS_D9_PIN TRIGORILLA_FAN1_PIN
#define RAMPS_D8_PIN TRIGORILLA_FAN0_PIN
#endif
// D44 - Typical Extruder Fan on Anycubic Delta devices
#define ORIG_E0_AUTO_FAN_PIN 44
#if HOTENDS > 1 || TEMP_SENSOR_BED // EEF, EEB, EFB
#define FAN1_PIN TRIGORILLA_FAN1_PIN
#endif
#define FAN2_PIN TRIGORILLA_FAN2_PIN
#define ORIG_E0_AUTO_FAN_PIN TRIGORILLA_FAN2_PIN // Used in Anycubic Kossel example config
#include "pins_RAMPS.h"

Loading…
Cancel
Save