Browse Source

Update German language, &c. (#14613)

pull/1/head
Ludy 5 years ago
committed by Scott Lahteine
parent
commit
6dcb85927a
  1. 2
      Marlin/src/HAL/HAL_AVR/pinsDebug.h
  2. 66
      Marlin/src/lcd/language/language_de.h
  3. 2
      Marlin/src/lcd/menu/menu.cpp
  4. 2
      Marlin/src/lcd/menu/menu_configuration.cpp
  5. 2
      Marlin/src/pins/stm32/pins_STM3R_MINI.h

2
Marlin/src/HAL/HAL_AVR/pinsDebug.h

@ -353,6 +353,8 @@ static void pwm_details(uint8_t pin) {
timer_prefix(0, 'A', 3);
#endif
}
#else
UNUSED(print_is_also_tied);
#endif
} // pwm_details

66
Marlin/src/lcd/language/language_de.h

@ -41,12 +41,12 @@
#define MSG_SD_REMOVED _UxGT("SD-Karte entfernt")
#define MSG_SD_RELEASED _UxGT("SD-Karte freigeg.")
#define MSG_LCD_ENDSTOPS _UxGT("Endstopp") // Max length 8 characters
#define MSG_LCD_SOFT_ENDSTOPS _UxGT("Soft-Endstopp")
#define MSG_LCD_SOFT_ENDSTOPS _UxGT("Software-Endstopp")
#define MSG_MAIN _UxGT("Hauptmenü")
#define MSG_ADVANCED_SETTINGS _UxGT("Erw. Einstellungen")
#define MSG_CONFIGURATION _UxGT("Konfiguration")
#define MSG_AUTOSTART _UxGT("Autostart")
#define MSG_DISABLE_STEPPERS _UxGT("Motoren deaktivieren") // M84
#define MSG_DISABLE_STEPPERS _UxGT("Motoren deaktivieren") // M84 :: Max length 19 characters
#define MSG_DEBUG_MENU _UxGT("Debug-Menü")
#define MSG_PROGRESS_BAR_TEST _UxGT("Statusbalken-Test")
#define MSG_AUTO_HOME _UxGT("Home XYZ") // G28
@ -62,18 +62,18 @@
#define MSG_SET_HOME_OFFSETS _UxGT("Setze Homeversatz")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Homeversatz aktiv")
#define MSG_SET_ORIGIN _UxGT("Setze Nullpunkte") //"G92 X0 Y0 Z0" commented out in ultralcd.cpp
#define MSG_PREHEAT_1 _UxGT("Vorwärmen " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_N _UxGT("Vorwärmen " PREHEAT_1_LABEL " ")
#define MSG_PREHEAT_1_ALL _UxGT("Vorw. " PREHEAT_1_LABEL " Alles")
#define MSG_PREHEAT_1_END _UxGT("Vorw. " PREHEAT_1_LABEL " Extr.")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Vorw. " PREHEAT_1_LABEL " Bett")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Vorw. " PREHEAT_1_LABEL " Einst.")
#define MSG_PREHEAT_2 _UxGT("Vorwärmen " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_N _UxGT("Vorwärmen " PREHEAT_2_LABEL " ")
#define MSG_PREHEAT_2_ALL _UxGT("Vorw. " PREHEAT_2_LABEL " Alles")
#define MSG_PREHEAT_2_END _UxGT("Vorw. " PREHEAT_2_LABEL " Extr.")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Vorw. " PREHEAT_2_LABEL " Bett")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Vorw. " PREHEAT_2_LABEL " Einst.")
#define MSG_PREHEAT_1 _UxGT(PREHEAT_1_LABEL " Vorwärmen")
#define MSG_PREHEAT_1_N _UxGT(PREHEAT_1_LABEL " Vorwärmen ")
#define MSG_PREHEAT_1_ALL _UxGT(PREHEAT_1_LABEL " Alles Vorwärmen")
#define MSG_PREHEAT_1_END _UxGT(PREHEAT_1_LABEL " Extr. Vorwärmen")
#define MSG_PREHEAT_1_BEDONLY _UxGT(PREHEAT_1_LABEL " Bett Vorwärmen")
#define MSG_PREHEAT_1_SETTINGS _UxGT(PREHEAT_1_LABEL " Einstellungen")
#define MSG_PREHEAT_2 _UxGT(PREHEAT_2_LABEL " Vorwärmen")
#define MSG_PREHEAT_2_N _UxGT(PREHEAT_2_LABEL " Vorwärmen ")
#define MSG_PREHEAT_2_ALL _UxGT(PREHEAT_2_LABEL " Alles Vorwärmen")
#define MSG_PREHEAT_2_END _UxGT(PREHEAT_2_LABEL " Extr. Vorwärmen")
#define MSG_PREHEAT_2_BEDONLY _UxGT(PREHEAT_2_LABEL " Bett Vorwärmen")
#define MSG_PREHEAT_2_SETTINGS _UxGT(PREHEAT_2_LABEL " Einstellungen")
#define MSG_PREHEAT_CUSTOM _UxGT("benutzerdef. Heizen")
#define MSG_COOLDOWN _UxGT("Abkühlen")
#define MSG_LASER_MENU _UxGT("Laser")
@ -81,15 +81,15 @@
#define MSG_LASER_ON _UxGT("Laser an")
#define MSG_LASER_POWER _UxGT("Laserleistung")
#define MSG_SPINDLE_MENU _UxGT("Spindel-Steuerung")
#define MSG_SPINDLE_OFF _UxGT("Spindel Aus")
#define MSG_SPINDLE_ON _UxGT("Spindel An")
#define MSG_SPINDLE_OFF _UxGT("Spindel aus")
#define MSG_SPINDLE_ON _UxGT("Spindel an")
#define MSG_SPINDLE_POWER _UxGT("Spindelleistung")
#define MSG_SPINDLE_REVERSE _UxGT("Spindelrichtung")
#define MSG_SWITCH_PS_ON _UxGT("Netzteil ein")
#define MSG_SWITCH_PS_OFF _UxGT("Netzteil aus")
#define MSG_EXTRUDE _UxGT("Extrudieren")
#define MSG_RETRACT _UxGT("Einzug")
#define MSG_MOVE_AXIS _UxGT("Achse Bewegen")
#define MSG_MOVE_AXIS _UxGT("Achsen bewegen")
#define MSG_BED_LEVELING _UxGT("Bett-Nivellierung")
#define MSG_LEVEL_BED _UxGT("Bett nivellieren")
#define MSG_LEVEL_CORNERS _UxGT("Ecken nivellieren")
@ -107,7 +107,7 @@
#define MSG_LCD_TILTING_MESH _UxGT("Berührungspunkt")
#define MSG_IDEX_MENU _UxGT("IDEX-Modus")
#define MSG_OFFSETS_MENU _UxGT("Werkzeugversätze")
#define MSG_IDEX_MODE_AUTOPARK _UxGT("Autom. Parken")
#define MSG_IDEX_MODE_AUTOPARK _UxGT("Autom. parken")
#define MSG_IDEX_MODE_DUPLICATE _UxGT("Duplizieren")
#define MSG_IDEX_MODE_MIRRORED_COPY _UxGT("Spiegelkopie")
#define MSG_IDEX_MODE_FULL_CTRL _UxGT("vollstä. Kontrolle")
@ -131,14 +131,14 @@
#define MSG_UBL_DONE_EDITING_MESH _UxGT("Bearbeitung beendet")
#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Eigenes Netz erst.")
#define MSG_UBL_BUILD_MESH_MENU _UxGT("Netz erstellen")
#define MSG_UBL_BUILD_MESH_M1 _UxGT("Netz erstellen " PREHEAT_1_LABEL)
#define MSG_UBL_BUILD_MESH_M2 _UxGT("Netz erstellen " PREHEAT_2_LABEL)
#define MSG_UBL_BUILD_MESH_M1 _UxGT(PREHEAT_1_LABEL " Netz erstellen")
#define MSG_UBL_BUILD_MESH_M2 _UxGT(PREHEAT_2_LABEL " Netz erstellen")
#define MSG_UBL_BUILD_COLD_MESH _UxGT("Netz erstellen kalt")
#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Netzhöhe einst.")
#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Höhe")
#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Netz validieren")
#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("Netz validieren " PREHEAT_1_LABEL)
#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("Netz validieren " PREHEAT_2_LABEL)
#define MSG_UBL_VALIDATE_MESH_M1 _UxGT(PREHEAT_1_LABEL " Netz validieren")
#define MSG_UBL_VALIDATE_MESH_M2 _UxGT(PREHEAT_2_LABEL " Netz validieren")
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Eig. Netz validieren")
#define MSG_UBL_CONTINUE_MESH _UxGT("Netzerst. forts.")
#define MSG_UBL_MESH_LEVELING _UxGT("Netz-Nivellierung")
@ -185,7 +185,7 @@
#define MSG_SET_LEDS_VIOLET _UxGT("Violett")
#define MSG_SET_LEDS_WHITE _UxGT("Weiß")
#define MSG_SET_LEDS_DEFAULT _UxGT("Standard")
#define MSG_CUSTOM_LEDS _UxGT("Benutzerdef.")
#define MSG_CUSTOM_LEDS _UxGT("Benutzerdefiniert")
#define MSG_INTENSITY_R _UxGT("Intensität Rot")
#define MSG_INTENSITY_G _UxGT("Intensität Grün")
#define MSG_INTENSITY_B _UxGT("Intensität Blau")
@ -200,9 +200,9 @@
#define MSG_MOVE_E _UxGT("Bewege Extruder")
#define MSG_HOTEND_TOO_COLD _UxGT("Hotend zu kalt")
#define MSG_MOVE_0025MM _UxGT(" 0,025 mm")
#define MSG_MOVE_01MM _UxGT(" 0,1 mm")
#define MSG_MOVE_1MM _UxGT(" 1,0 mm")
#define MSG_MOVE_10MM _UxGT("10,0 mm")
#define MSG_MOVE_01MM _UxGT(" 0,1 mm")
#define MSG_MOVE_1MM _UxGT(" 1,0 mm")
#define MSG_MOVE_10MM _UxGT("10,0 mm")
#define MSG_SPEED _UxGT("Geschw.")
#define MSG_BED_Z _UxGT("Bett Z")
#define MSG_NOZZLE _UxGT("Düse")
@ -216,8 +216,8 @@
#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" max")
#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Faktor")
#define MSG_AUTOTEMP _UxGT("Auto Temperatur")
#define MSG_LCD_ON _UxGT("Ein")
#define MSG_LCD_OFF _UxGT("Aus")
#define MSG_LCD_ON _UxGT("an")
#define MSG_LCD_OFF _UxGT("aus")
#define MSG_PID_P _UxGT("PID P")
#define MSG_PID_I _UxGT("PID I")
#define MSG_PID_D _UxGT("PID D")
@ -282,7 +282,7 @@
#define MSG_TUNE _UxGT("Justierung")
#define MSG_START_PRINT _UxGT("Starte Druck")
#define MSG_BUTTON_NEXT _UxGT("Weiter")
#define MSG_BUTTON_INIT _UxGT("Init")
#define MSG_BUTTON_INIT _UxGT("Bestätigen")
#define MSG_BUTTON_STOP _UxGT("Stop")
#define MSG_BUTTON_PRINT _UxGT("Drucken")
#define MSG_BUTTON_RESET _UxGT("Zurücksetzen")
@ -304,11 +304,11 @@
#define MSG_STOPPED _UxGT("ANGEHALTEN")
#define MSG_CONTROL_RETRACT _UxGT("Einzug mm")
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Wechs. Einzug mm")
#define MSG_CONTROL_RETRACTF _UxGT("Einzug V")
#define MSG_CONTROL_RETRACTF _UxGT("V Einzug")
#define MSG_CONTROL_RETRACT_ZHOP _UxGT("Z-Sprung mm")
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm")
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Wechs. UnRet mm")
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")
#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V")
#define MSG_AUTORETRACT _UxGT("Autom. Einzug")
#define MSG_FILAMENT_SWAP_LENGTH _UxGT("Einzugslänge")
@ -353,7 +353,7 @@
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
#define MSG_BABYSTEP_TOTAL _UxGT("Total")
#define MSG_ENDSTOP_ABORT _UxGT("Endstopp Abbr.")
#define MSG_ENDSTOP_ABORT _UxGT("Abbr. mit Endstopp")
#define MSG_HEATING_FAILED_LCD _UxGT("HEIZEN ERFOLGLOS")
#define MSG_HEATING_FAILED_LCD_BED _UxGT("Bett heizen fehlge.")
#define MSG_HEATING_FAILED_LCD_CHAMBER _UxGT("Geh. heizen fehlge.")
@ -368,7 +368,7 @@
#define MSG_ERR_MAXTEMP_CHAMBER _UxGT("Err:Gehäuse max Temp")
#define MSG_ERR_MINTEMP_CHAMBER _UxGT("Err:Gehäuse min Temp")
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
#define MSG_HALTED _UxGT("DRUCKER STOPP")
#define MSG_HALTED _UxGT("DRUCKER GESTOPPT")
#define MSG_PLEASE_RESET _UxGT("Bitte neustarten")
#define MSG_SHORT_DAY _UxGT("t") // One character only
#define MSG_SHORT_HOUR _UxGT("h") // One character only

2
Marlin/src/lcd/menu/menu.cpp

@ -448,7 +448,7 @@ bool ui_selection; // = false
void set_ui_selection(const bool sel) { ui_selection = sel; }
void do_select_screen(PGM_P const yes, PGM_P const no, selectFunc_t yesFunc, selectFunc_t noFunc, PGM_P const pref, const char * const string/*=nullptr*/, PGM_P const suff/*=nullptr*/) {
if (ui.encoderPosition) {
ui_selection = (ENCODERBASE) > 0 == int16_t(ui.encoderPosition) > 0;
ui_selection = ((ENCODERBASE) > 0) == (int16_t(ui.encoderPosition) > 0);
ui.encoderPosition = 0;
}
const bool got_click = ui.use_click();

2
Marlin/src/lcd/menu/menu_configuration.cpp

@ -303,7 +303,7 @@ static void lcd_factory_settings() {
#endif
START_MENU();
MENU_BACK(MSG_CONFIGURATION);
MENU_ITEM_EDIT(uint8, MSG_FAN_SPEED, &ui.preheat_fan_speed[material], 0, 255);
MENU_ITEM_EDIT(percent, MSG_FAN_SPEED, &ui.preheat_fan_speed[material], 0, 255);
#if HAS_TEMP_HOTEND
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &ui.preheat_hotend_temp[material], MINTEMP_ALL, MAXTEMP_ALL - 15);
#endif

2
Marlin/src/pins/stm32/pins_STM3R_MINI.h

@ -127,7 +127,7 @@
#define LCD_PINS_D7 PB15
#else
#define LCD_PINS_RS PB8
#define LCD_PINS_ENABLE PD2ins
#define LCD_PINS_ENABLE PD2
#define LCD_PINS_D4 PB12
#define LCD_PINS_D5 PB13
#define LCD_PINS_D6 PB14

Loading…
Cancel
Save