|
|
|
@ -6,72 +6,35 @@ |
|
|
|
* When selecting the rusian language, a slightly different LCD implementation is used to handle UTF8 characters. |
|
|
|
**/ |
|
|
|
|
|
|
|
// Declare LCD class to use
|
|
|
|
#if defined(LCD_I2C_TYPE_PCF8575) |
|
|
|
// note: these are virtual pins on the PCF8575 controller not Arduino pins
|
|
|
|
#define LCD_I2C_PIN_BL 3 |
|
|
|
#define LCD_I2C_PIN_EN 2 |
|
|
|
#define LCD_I2C_PIN_RW 1 |
|
|
|
#define LCD_I2C_PIN_RS 0 |
|
|
|
#define LCD_I2C_PIN_D4 4 |
|
|
|
#define LCD_I2C_PIN_D5 5 |
|
|
|
#define LCD_I2C_PIN_D6 6 |
|
|
|
#define LCD_I2C_PIN_D7 7 |
|
|
|
|
|
|
|
#include <Wire.h> |
|
|
|
#include <LCD.h> |
|
|
|
#include <LiquidCrystal_I2C.h> |
|
|
|
#define LCD_CLASS LiquidCrystal_I2C |
|
|
|
LCD_CLASS lcd(LCD_I2C_ADDRESS,LCD_I2C_PIN_EN,LCD_I2C_PIN_RW,LCD_I2C_PIN_RS,LCD_I2C_PIN_D4,LCD_I2C_PIN_D5,LCD_I2C_PIN_D6,LCD_I2C_PIN_D7); |
|
|
|
#elif defined(LCD_I2C_TYPE_MCP23017) |
|
|
|
//for the LED indicators (which maybe mapped to different things in lcd_implementation_update_indicators())
|
|
|
|
#define LED_A 0x04 //100
|
|
|
|
#define LED_B 0x02 //010
|
|
|
|
#define LED_C 0x01 //001
|
|
|
|
|
|
|
|
#include <Wire.h> |
|
|
|
#include <LiquidTWI2.h> |
|
|
|
#define LCD_CLASS LiquidTWI2 |
|
|
|
LCD_CLASS lcd(LCD_I2C_ADDRESS); //An alternative I2C master address can be used in place of "0"
|
|
|
|
#elif defined(LCD_I2C_TYPE_MCP23008) |
|
|
|
#include <Wire.h> |
|
|
|
#include <LiquidTWI2.h> |
|
|
|
#define LCD_CLASS LiquidTWI2 |
|
|
|
LCD_CLASS lcd(LCD_I2C_ADDRESS); //An alternative I2C master address can be used in place of "0"
|
|
|
|
#else |
|
|
|
#if LANGUAGE_CHOICE == 6 |
|
|
|
#include "LiquidCrystalRus.h" |
|
|
|
#define LCD_CLASS LiquidCrystalRus |
|
|
|
#else |
|
|
|
#include <LiquidCrystal.h> |
|
|
|
#define LCD_CLASS LiquidCrystal |
|
|
|
#endif |
|
|
|
LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
|
|
|
|
#endif |
|
|
|
|
|
|
|
extern volatile uint8_t buttons; //the last checked buttons in a bit array.
|
|
|
|
|
|
|
|
// provide default button bitmask and encoder definitions (note this is not pin or motherboard specific)
|
|
|
|
#ifdef LCD_I2C_VIKI |
|
|
|
//encoder rotation values
|
|
|
|
#define encrot0 0 |
|
|
|
#define encrot1 2 |
|
|
|
#define encrot2 3 |
|
|
|
#define encrot3 1 |
|
|
|
|
|
|
|
#define BLEN_C 2 |
|
|
|
#define BLEN_B 1 |
|
|
|
#define BLEN_A 0 |
|
|
|
|
|
|
|
#define EN_C (1<<BLEN_C) // The stop/pause/resume button comes through BTN_ENC pin (for consistency with NEWPANEL code)
|
|
|
|
#define EN_B (1<<BLEN_B) // The two encoder pins are connected through BTN_EN1 and BTN_EN2
|
|
|
|
#define EN_A (1<<BLEN_A) |
|
|
|
////////////////////////////////////
|
|
|
|
// Setup button and encode mappings for each panel (into 'buttons' variable)
|
|
|
|
//
|
|
|
|
// This is just to map common functions (across different panels) onto the same
|
|
|
|
// macro name. The mapping is independent of whether the button is directly connected or
|
|
|
|
// via a shift/i2c register.
|
|
|
|
|
|
|
|
#ifdef ULTIPANEL |
|
|
|
// All Ultipanels might have an encoder - so this is always be mapped onto first two bits
|
|
|
|
#define BLEN_B 1 |
|
|
|
#define BLEN_A 0 |
|
|
|
|
|
|
|
#define EN_B (1<<BLEN_B) // The two encoder pins are connected through BTN_EN1 and BTN_EN2
|
|
|
|
#define EN_A (1<<BLEN_A) |
|
|
|
|
|
|
|
//
|
|
|
|
// Setup other button mappings of each panel
|
|
|
|
//
|
|
|
|
#if defined(LCD_I2C_VIKI) |
|
|
|
#define BLEN_C 2 // == pause/stop/restart button connected to BTN_ENC pin (named for consistency with NEWPANEL code)
|
|
|
|
#define EN_C (1<<BLEN_C) |
|
|
|
|
|
|
|
#define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C)
|
|
|
|
#define B_I2C_BTN_OFFSET (BLEN_C+1) // (the first three bit positions reserved for EN_A, EN_B, EN_C)
|
|
|
|
|
|
|
|
// button and encoder bit positions within 'buttons'
|
|
|
|
#define B_ST (EN_C) // The pause/stop/resume button is mapped to EN_C for consistency with NEWPANEL
|
|
|
|
#define B_LE (BUTTON_LEFT<<B_I2C_BTN_OFFSET) // The remaining buttons are I2C read buttons.
|
|
|
|
#define B_ST (EN_C) // Map the pause/stop/resume button into its normalized functional name
|
|
|
|
#define B_LE (BUTTON_LEFT<<B_I2C_BTN_OFFSET) // The remaining normalized buttons are all read via I2C
|
|
|
|
#define B_UP (BUTTON_UP<<B_I2C_BTN_OFFSET) |
|
|
|
#define B_MI (BUTTON_SELECT<<B_I2C_BTN_OFFSET) |
|
|
|
#define B_DW (BUTTON_DOWN<<B_I2C_BTN_OFFSET) |
|
|
|
@ -79,41 +42,16 @@ extern volatile uint8_t buttons; //the last checked buttons in a bit array. |
|
|
|
|
|
|
|
#define LCD_CLICKED (buttons&(B_MI|B_RI|B_ST)) // pause/stop button also acts as click until we implement proper pause/stop.
|
|
|
|
|
|
|
|
// I2C buttons are likely to take too long to read inside interrupt context and so we read them during lcd_update
|
|
|
|
#define LCD_HAS_EXTRA_BUTTONS |
|
|
|
// I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update
|
|
|
|
#define LCD_HAS_SLOW_BUTTONS |
|
|
|
|
|
|
|
#elif defined(NEWPANEL) |
|
|
|
//from the same bit in the RAMPS Newpanel define
|
|
|
|
//encoder rotation values
|
|
|
|
#define encrot0 0 |
|
|
|
#define encrot1 2 |
|
|
|
#define encrot2 3 |
|
|
|
#define encrot3 1 |
|
|
|
|
|
|
|
#define BLEN_C 2 |
|
|
|
#define BLEN_B 1 |
|
|
|
#define BLEN_A 0 |
|
|
|
|
|
|
|
// Standard Newpanel has just a single button (all direclty connected)
|
|
|
|
#define BLEN_C 2 // == select button
|
|
|
|
#define EN_C (1<<BLEN_C) |
|
|
|
#define EN_B (1<<BLEN_B) |
|
|
|
#define EN_A (1<<BLEN_A) |
|
|
|
|
|
|
|
#define LCD_CLICKED (buttons&EN_C) |
|
|
|
|
|
|
|
#else // old style ULTIPANEL
|
|
|
|
//encoder rotation values
|
|
|
|
#ifndef ULTIMAKERCONTROLLER |
|
|
|
#define encrot0 0 |
|
|
|
#define encrot1 2 |
|
|
|
#define encrot2 3 |
|
|
|
#define encrot3 1 |
|
|
|
#else |
|
|
|
#define encrot0 0 |
|
|
|
#define encrot1 1 |
|
|
|
#define encrot2 3 |
|
|
|
#define encrot3 2 |
|
|
|
#endif |
|
|
|
|
|
|
|
//bits in the shift register that carry the buttons for:
|
|
|
|
// left up center down right red(stop)
|
|
|
|
#define BL_LE 7 |
|
|
|
@ -123,9 +61,6 @@ extern volatile uint8_t buttons; //the last checked buttons in a bit array. |
|
|
|
#define BL_RI 3 |
|
|
|
#define BL_ST 2 |
|
|
|
|
|
|
|
#define BLEN_B 1 |
|
|
|
#define BLEN_A 0 |
|
|
|
|
|
|
|
//automatic, do not change
|
|
|
|
#define B_LE (1<<BL_LE) |
|
|
|
#define B_UP (1<<BL_UP) |
|
|
|
@ -133,15 +68,78 @@ extern volatile uint8_t buttons; //the last checked buttons in a bit array. |
|
|
|
#define B_DW (1<<BL_DW) |
|
|
|
#define B_RI (1<<BL_RI) |
|
|
|
#define B_ST (1<<BL_ST) |
|
|
|
#define EN_B (1<<BLEN_B) |
|
|
|
#define EN_A (1<<BLEN_A) |
|
|
|
|
|
|
|
#define LCD_CLICKED (buttons&(B_MI|B_ST)) |
|
|
|
#endif//else NEWPANEL
|
|
|
|
|
|
|
|
#ifdef LCD_HAS_STATUS_INDICATORS |
|
|
|
//forward declaration
|
|
|
|
static void lcd_implementation_update_indicators(); |
|
|
|
////////////////////////
|
|
|
|
// Setup Rotary Encoder Bit Values (for two pin encoders to indicate movement)
|
|
|
|
// These values are independent of which pins are used for EN_A and EN_B indications
|
|
|
|
// The rotary encoder part is also independent to the chipset used for the LCD
|
|
|
|
#if defined(EN_A) && defined(EN_B) |
|
|
|
#ifndef ULTIMAKERCONTROLLER |
|
|
|
#define encrot0 0 |
|
|
|
#define encrot1 2 |
|
|
|
#define encrot2 3 |
|
|
|
#define encrot3 1 |
|
|
|
#else |
|
|
|
#define encrot0 0 |
|
|
|
#define encrot1 1 |
|
|
|
#define encrot2 3 |
|
|
|
#define encrot3 2 |
|
|
|
#endif |
|
|
|
#endif |
|
|
|
|
|
|
|
#endif //ULTIPANEL
|
|
|
|
|
|
|
|
////////////////////////////////////
|
|
|
|
// Create LCD class instance and chipset-specific information
|
|
|
|
#if defined(LCD_I2C_TYPE_PCF8575) |
|
|
|
// note: these are register mapped pins on the PCF8575 controller not Arduino pins
|
|
|
|
#define LCD_I2C_PIN_BL 3 |
|
|
|
#define LCD_I2C_PIN_EN 2 |
|
|
|
#define LCD_I2C_PIN_RW 1 |
|
|
|
#define LCD_I2C_PIN_RS 0 |
|
|
|
#define LCD_I2C_PIN_D4 4 |
|
|
|
#define LCD_I2C_PIN_D5 5 |
|
|
|
#define LCD_I2C_PIN_D6 6 |
|
|
|
#define LCD_I2C_PIN_D7 7 |
|
|
|
|
|
|
|
#include <Wire.h> |
|
|
|
#include <LCD.h> |
|
|
|
#include <LiquidCrystal_I2C.h> |
|
|
|
#define LCD_CLASS LiquidCrystal_I2C |
|
|
|
LCD_CLASS lcd(LCD_I2C_ADDRESS,LCD_I2C_PIN_EN,LCD_I2C_PIN_RW,LCD_I2C_PIN_RS,LCD_I2C_PIN_D4,LCD_I2C_PIN_D5,LCD_I2C_PIN_D6,LCD_I2C_PIN_D7); |
|
|
|
|
|
|
|
#elif defined(LCD_I2C_TYPE_MCP23017) |
|
|
|
//for the LED indicators (which maybe mapped to different things in lcd_implementation_update_indicators())
|
|
|
|
#define LED_A 0x04 //100
|
|
|
|
#define LED_B 0x02 //010
|
|
|
|
#define LED_C 0x01 //001
|
|
|
|
|
|
|
|
#define LCD_HAS_STATUS_INDICATORS |
|
|
|
|
|
|
|
#include <Wire.h> |
|
|
|
#include <LiquidTWI2.h> |
|
|
|
#define LCD_CLASS LiquidTWI2 |
|
|
|
LCD_CLASS lcd(LCD_I2C_ADDRESS); |
|
|
|
|
|
|
|
#elif defined(LCD_I2C_TYPE_MCP23008) |
|
|
|
#include <Wire.h> |
|
|
|
#include <LiquidTWI2.h> |
|
|
|
#define LCD_CLASS LiquidTWI2 |
|
|
|
LCD_CLASS lcd(LCD_I2C_ADDRESS); |
|
|
|
|
|
|
|
#else |
|
|
|
// Standard directly connected LCD implementations
|
|
|
|
#if LANGUAGE_CHOICE == 6 |
|
|
|
#include "LiquidCrystalRus.h" |
|
|
|
#define LCD_CLASS LiquidCrystalRus |
|
|
|
#else |
|
|
|
#include <LiquidCrystal.h> |
|
|
|
#define LCD_CLASS LiquidCrystal |
|
|
|
#endif |
|
|
|
LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
|
|
|
|
#endif |
|
|
|
|
|
|
|
/* Custom characters defined in the first 8 characters of the LCD */ |
|
|
|
@ -247,13 +245,16 @@ static void lcd_implementation_init() |
|
|
|
lcd.setBacklightPin(LCD_I2C_PIN_BL,POSITIVE); |
|
|
|
lcd.setBacklight(HIGH); |
|
|
|
#endif |
|
|
|
|
|
|
|
#elif defined(LCD_I2C_TYPE_MCP23017) |
|
|
|
lcd.setMCPType(LTI_TYPE_MCP23017); |
|
|
|
lcd.begin(LCD_WIDTH, LCD_HEIGHT); |
|
|
|
lcd.setBacklight(0); //set all the LEDs off to begin with
|
|
|
|
|
|
|
|
#elif defined(LCD_I2C_TYPE_MCP23008) |
|
|
|
lcd.setMCPType(LTI_TYPE_MCP23008); |
|
|
|
lcd.begin(LCD_WIDTH, LCD_HEIGHT); |
|
|
|
|
|
|
|
#else |
|
|
|
lcd.begin(LCD_WIDTH, LCD_HEIGHT); |
|
|
|
#endif |
|
|
|
@ -439,9 +440,6 @@ static void lcd_implementation_status_screen() |
|
|
|
//Status message line on the last line
|
|
|
|
lcd.setCursor(0, LCD_HEIGHT - 1); |
|
|
|
lcd.print(lcd_status_message); |
|
|
|
#ifdef LCD_HAS_STATUS_INDICATORS |
|
|
|
lcd_implementation_update_indicators(); |
|
|
|
#endif |
|
|
|
} |
|
|
|
static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char) |
|
|
|
{ |
|
|
|
@ -630,7 +628,7 @@ static void lcd_implementation_drawmenu_sddirectory(uint8_t row, const char* pst |
|
|
|
|
|
|
|
static void lcd_implementation_quick_feedback() |
|
|
|
{ |
|
|
|
#ifdef LCD_HAS_I2C_BUZZ |
|
|
|
#ifdef LCD_USE_I2C_BUZZER |
|
|
|
lcd.buzz(300,4000); |
|
|
|
#elif defined(BEEPER) && BEEPER > -1 |
|
|
|
SET_OUTPUT(BEEPER); |
|
|
|
@ -665,12 +663,12 @@ static void lcd_implementation_update_indicators() |
|
|
|
} |
|
|
|
#endif |
|
|
|
|
|
|
|
#ifdef LCD_HAS_EXTRA_BUTTONS |
|
|
|
static uint8_t lcd_read_extra_buttons() |
|
|
|
#ifdef LCD_HAS_SLOW_BUTTONS |
|
|
|
static uint8_t lcd_implementation_read_slow_buttons() |
|
|
|
{ |
|
|
|
#ifdef LCD_I2C_TYPE_MCP23017 |
|
|
|
// the I2C button bit positions are shifted by three bits from the native LiquidTWI2 position
|
|
|
|
// this is potentially too slow to call inside interrupt context
|
|
|
|
// Reading these buttons this is likely to be too slow to call inside interrupt context
|
|
|
|
// so they are called during normal lcd_update
|
|
|
|
return lcd.readButtons() << B_I2C_BTN_OFFSET; |
|
|
|
#endif |
|
|
|
} |
|
|
|
|
Robert F-C
12 years ago