Revert at90usb1286 conditional (#19733)

Marlin/src/HAL/AVR/HAL.h

@@ -25,7 +25,7 @@
 #include "watchdog.h"
 #include "math.h"
 
-#ifdef IS_AT90USB
+#ifdef USBCON
   #include <HardwareSerial.h>
 #else
   #define HardwareSerial_h // Hack to prevent HardwareSerial.h header inclusion
@@ -81,7 +81,7 @@ typedef int8_t pin_t;
 //extern uint8_t MCUSR;
 
 // Serial ports
-#ifdef IS_AT90USB
+#ifdef USBCON
   #define MYSERIAL0 TERN(BLUETOOTH, bluetoothSerial, Serial)
 #else
   #if !WITHIN(SERIAL_PORT, -1, 3)

Marlin/src/HAL/AVR/MarlinSerial.cpp

@@ -38,7 +38,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if !IS_AT90USB && (defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H))
+#if !defined(USBCON) && (defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H))
 
 #include "MarlinSerial.h"
 #include "../../MarlinCore.h"
@@ -792,10 +792,10 @@ MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
 
 #endif
 
-#endif // !IS_AT90USB && (UBRRH || UBRR0H || UBRR1H || UBRR2H || UBRR3H)
+#endif // !USBCON && (UBRRH || UBRR0H || UBRR1H || UBRR2H || UBRR3H)
 
 // For AT90USB targets use the UART for BT interfacing
-#if BOTH(IS_AT90USB, BLUETOOTH)
+#if defined(USBCON) && ENABLED(BLUETOOTH)
   HardwareSerial bluetoothSerial;
 #endif
 

Marlin/src/HAL/AVR/MarlinSerial.h

@@ -327,6 +327,6 @@
 #endif
 
 // Use the UART for Bluetooth in AT90USB configurations
-#if BOTH(IS_AT90USB, BLUETOOTH)
+#if defined(USBCON) && ENABLED(BLUETOOTH)
   extern HardwareSerial bluetoothSerial;
 #endif

Marlin/src/gcode/control/M111.cpp

@@ -55,7 +55,7 @@ void GcodeSuite::M111() {
   }
   else {
     SERIAL_ECHOPGM(STR_DEBUG_OFF);
-    #if !IS_AT90USB
+    #if !defined(__AVR__) || !defined(USBCON)
       #if ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS)
         SERIAL_ECHOPAIR("\nBuffer Overruns: ", MYSERIAL0.buffer_overruns());
       #endif
@@ -71,7 +71,7 @@ void GcodeSuite::M111() {
       #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
         SERIAL_ECHOPAIR("\nMax RX Queue Size: ", MYSERIAL0.rxMaxEnqueued());
       #endif
-    #endif // !IS_AT90USB
+    #endif // !__AVR__ || !USBCON
   }
   SERIAL_EOL();
 }

Marlin/src/gcode/queue.cpp

@@ -624,7 +624,7 @@ void GCodeQueue::advance() {
         card.closefile();
         SERIAL_ECHOLNPGM(STR_FILE_SAVED);
 
-        #if !IS_AT90USB
+        #if !defined(__AVR__) || !defined(USBCON)
           #if ENABLED(SERIAL_STATS_DROPPED_RX)
             SERIAL_ECHOLNPAIR("Dropped bytes: ", MYSERIAL0.dropped());
           #endif

Marlin/src/inc/Conditionals_adv.h

@@ -208,10 +208,7 @@
   #define NEEDS_HARDWARE_PWM 1
 #endif
 
-#if defined(__AVR__) && defined(USBCON)
+#if !defined(__AVR__) || !defined(USBCON)
-  #define IS_AT90USB 1
-  #undef SERIAL_XON_XOFF // Not supported on USB-native devices
-#else
   // Define constants and variables for buffering serial data.
   // Use only 0 or powers of 2 greater than 1
   // : [0, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, ...]
@@ -223,6 +220,9 @@
   #ifndef TX_BUFFER_SIZE
     #define TX_BUFFER_SIZE 32
   #endif
+#else
+  // SERIAL_XON_XOFF not supported on USB-native devices
+  #undef SERIAL_XON_XOFF
 #endif
 
 #if ENABLED(HOST_ACTION_COMMANDS)

Marlin/src/inc/SanityCheck.h

@@ -582,7 +582,7 @@
 /**
  * Serial
  */
-#if !IS_AT90USB
+#if !(defined(__AVR__) && defined(USBCON))
   #if ENABLED(SERIAL_XON_XOFF) && RX_BUFFER_SIZE < 1024
     #error "SERIAL_XON_XOFF requires RX_BUFFER_SIZE >= 1024 for reliable transfers without drops."
   #elif RX_BUFFER_SIZE && (RX_BUFFER_SIZE < 2 || !IS_POWER_OF_2(RX_BUFFER_SIZE))
@@ -2108,9 +2108,9 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
 #endif
 
 /**
- * Emergency Command Parser
+ * emergency-command parser
  */
-#if BOTH(IS_AT90USB, EMERGENCY_PARSER)
+#if ENABLED(EMERGENCY_PARSER) && defined(__AVR__) && defined(USBCON)
   #error "EMERGENCY_PARSER does not work on boards with AT90USB processors (USBCON)."
 #endif