Browse Source

Fix some config comments

pull/1/head
Scott Lahteine 6 years ago
parent
commit
66f83d33e6
  1. 3
      Marlin/src/config/examples/Formbot/T-Rex_2+/Configuration_adv.h
  2. 4
      Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h
  3. 17
      Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h

3
Marlin/src/config/examples/Formbot/T-Rex_2+/Configuration_adv.h

@ -354,9 +354,6 @@
*/ */
#define DUAL_X_CARRIAGE #define DUAL_X_CARRIAGE
#if ENABLED(DUAL_X_CARRIAGE) #if ENABLED(DUAL_X_CARRIAGE)
// Configuration for second X-carriage
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
// the second x-carriage always homes to the maximum endstop.
#define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
#define X1_MAX_POS (X_BED_SIZE) // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X1_MAX_POS (X_BED_SIZE) // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
#define X2_MIN_POS 0 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MIN_POS 0 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage

4
Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h

@ -2020,9 +2020,7 @@
// If the servo can't reach the requested position, increase it. // If the servo can't reach the requested position, increase it.
#define SERVO_DELAY { 300 } #define SERVO_DELAY { 300 }
// Servo deactivation // Only power servos during movement, otherwise leave off to prevent jitter
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
//#define DEACTIVATE_SERVOS_AFTER_MOVE //#define DEACTIVATE_SERVOS_AFTER_MOVE
#endif // CONFIGURATION_H #endif // CONFIGURATION_H

17
Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h

@ -342,15 +342,18 @@
#endif #endif
#endif #endif
// Enable this for dual x-carriage printers. /**
// A dual x-carriage design has the advantage that the inactive extruder can be parked which * Dual X Carriage
// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage *
// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. * This setup has two X carriages that can move independently, each with its own hotend.
* The carriages can be used to print an object with two colors or materials, or in
* "duplication mode" it can print two identical or X-mirrored objects simultaneously.
* The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board.
*/
#define DUAL_X_CARRIAGE #define DUAL_X_CARRIAGE
#if ENABLED(DUAL_X_CARRIAGE) #if ENABLED(DUAL_X_CARRIAGE)
// Configuration for second X-carriage
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
// the second x-carriage always homes to the maximum endstop.
#define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
#define X1_MAX_POS (X_BED_SIZE) // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X1_MAX_POS (X_BED_SIZE) // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
#define X2_MIN_POS 0 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MIN_POS 0 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage

Loading…
Cancel
Save