From 66f83d33e632ee9432c905eff09d03f57f54b33d Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sat, 15 Sep 2018 23:13:55 -0500 Subject: [PATCH] Fix some config comments --- .../Formbot/T-Rex_2+/Configuration_adv.h | 3 --- .../examples/Formbot/T_Rex_3/Configuration.h | 4 +--- .../Formbot/T_Rex_3/Configuration_adv.h | 17 ++++++++++------- 3 files changed, 11 insertions(+), 13 deletions(-) diff --git a/Marlin/src/config/examples/Formbot/T-Rex_2+/Configuration_adv.h b/Marlin/src/config/examples/Formbot/T-Rex_2+/Configuration_adv.h index e7a444da84..431fceca91 100644 --- a/Marlin/src/config/examples/Formbot/T-Rex_2+/Configuration_adv.h +++ b/Marlin/src/config/examples/Formbot/T-Rex_2+/Configuration_adv.h @@ -354,9 +354,6 @@ */ #define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage #define X1_MAX_POS (X_BED_SIZE) // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 0 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage diff --git a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h index 78a4f5dd49..411e247492 100644 --- a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h @@ -2020,9 +2020,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h index f21e73f1e9..abbacc0b4b 100644 --- a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -342,15 +342,18 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ #define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage #define X1_MAX_POS (X_BED_SIZE) // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 0 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage