Browse Source

Merge pull request #7442 from thinkyhead/bf1_geeetech_gt2560_revs

Support for Geeetech GT2560 Rev.A/Rev.A+
pull/1/head
Scott Lahteine 7 years ago
committed by GitHub
parent
commit
6440904c1c
  1. 2
      Marlin/Configuration.h
  2. 2
      Marlin/boards.h
  3. 1665
      Marlin/example_configurations/Geeetech/GT2560/Configuration.h
  4. 1
      Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h
  5. 4
      Marlin/pins.h
  6. 133
      Marlin/pins_GT2560_REV_A.h
  7. 31
      Marlin/pins_GT2560_REV_A_PLUS.h

2
Marlin/Configuration.h

@ -914,7 +914,7 @@
#define UBL_PROBE_PT_3_X 180 #define UBL_PROBE_PT_3_X 180
#define UBL_PROBE_PT_3_Y 20 #define UBL_PROBE_PT_3_Y 20
#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation //#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#elif ENABLED(MESH_BED_LEVELING) #elif ENABLED(MESH_BED_LEVELING)

2
Marlin/boards.h

@ -64,6 +64,8 @@
#define BOARD_ULTIMAKER 7 // Ultimaker #define BOARD_ULTIMAKER 7 // Ultimaker
#define BOARD_ULTIMAKER_OLD 71 // Ultimaker (Older electronics. Pre 1.5.4. This is rare) #define BOARD_ULTIMAKER_OLD 71 // Ultimaker (Older electronics. Pre 1.5.4. This is rare)
#define BOARD_ULTIMAIN_2 72 // Ultimainboard 2.x (Uses TEMP_SENSOR 20) #define BOARD_ULTIMAIN_2 72 // Ultimainboard 2.x (Uses TEMP_SENSOR 20)
#define BOARD_GT2560_REV_A 74 // Geeetech GT2560 Rev. A
#define BOARD_GT2560_REV_A_PLUS 75 // Geeetech GT2560 Rev. A+ (with auto level probe)
#define BOARD_3DRAG 77 // 3Drag Controller #define BOARD_3DRAG 77 // 3Drag Controller
#define BOARD_K8200 78 // Velleman K8200 Controller (derived from 3Drag Controller) #define BOARD_K8200 78 // Velleman K8200 Controller (derived from 3Drag Controller)
#define BOARD_K8400 79 // Velleman K8400 Controller (derived from 3Drag Controller) #define BOARD_K8400 79 // Velleman K8400 Controller (derived from 3Drag Controller)

1665
Marlin/example_configurations/Geeetech/GT2560/Configuration.h

File diff suppressed because it is too large

1
Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h

@ -524,7 +524,6 @@
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 4000, 4000, 40, 4000 } #define DEFAULT_MAX_ACCELERATION { 4000, 4000, 40, 4000 }
/** /**

4
Marlin/pins.h

@ -192,6 +192,10 @@
#include "pins_SAINSMART_2IN1.h" #include "pins_SAINSMART_2IN1.h"
#elif MB(ZRIB_V20) #elif MB(ZRIB_V20)
#include "pins_ZRIB_V20.h" #include "pins_ZRIB_V20.h"
#elif MB(GT2560_REV_A)
#include "pins_GT2560_REV_A.h"
#elif MB(GT2560_REV_A_PLUS)
#include "pins_GT2560_REV_A_PLUS.h"
#else #else
#error "Unknown MOTHERBOARD value set in Configuration.h" #error "Unknown MOTHERBOARD value set in Configuration.h"
#endif #endif

133
Marlin/pins_GT2560_REV_A.h

@ -0,0 +1,133 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Geeetech GT2560 Revision A board pin assignments, based on the work of
* George Robles (https://georges3dprinters.com) and
* Richard Smith <galorin@gmail.com>
*/
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "GT2560 Rev.A"
#define DEFAULT_MACHINE_NAME "Prusa i3 Pro B"
#define LARGE_FLASH true
//
// Limit Switches
//
#define X_MIN_PIN 22
#define X_MAX_PIN 24
#define Y_MIN_PIN 26
#define Y_MAX_PIN 28
#define Z_MIN_PIN 30
#define Z_MAX_PIN 32
//
// Steppers
//
#define X_STEP_PIN 25
#define X_DIR_PIN 23
#define X_ENABLE_PIN 27
#define Y_STEP_PIN 31
#define Y_DIR_PIN 33
#define Y_ENABLE_PIN 29
#define Z_STEP_PIN 37
#define Z_DIR_PIN 39
#define Z_ENABLE_PIN 35
#define E0_STEP_PIN 43
#define E0_DIR_PIN 45
#define E0_ENABLE_PIN 41
#define E1_STEP_PIN 49
#define E1_DIR_PIN 47
#define E1_ENABLE_PIN 48
//
// Temperature Sensors
//
#define TEMP_0_PIN 8
#define TEMP_1_PIN 9
#define TEMP_BED_PIN 10
//
// Heaters / Fans
//
#define HEATER_0_PIN 2
#define HEATER_1_PIN 3
#define HEATER_BED_PIN 4
#define FAN_PIN 7
//
// Misc. Functions
//
#define SDPOWER -1
#define SDSS 53
#define LED_PIN 13
#define PS_ON_PIN 12
#define SUICIDE_PIN 54 // Must be enabled at startup to keep power flowing
#define KILL_PIN -1
#if ENABLED(ULTRA_LCD)
#define BEEPER_PIN 18
#if ENABLED(NEWPANEL)
#define LCD_PINS_RS 20
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 16
#define LCD_PINS_D5 21
#define LCD_PINS_D6 5
#define LCD_PINS_D7 6
// Buttons are directly attached
#define BTN_EN1 42
#define BTN_EN2 40
#define BTN_ENC 19
#define SD_DETECT_PIN 38
#else // !NEWPANEL
#define SHIFT_CLK 38
#define SHIFT_LD 42
#define SHIFT_OUT 40
#define SHIFT_EN 17
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 5
#define LCD_PINS_D4 6
#define LCD_PINS_D5 21
#define LCD_PINS_D6 20
#define LCD_PINS_D7 19
#define SD_DETECT_PIN -1
#endif // !NEWPANEL
#endif // ULTRA_LCD

31
Marlin/pins_GT2560_REV_A_PLUS.h

@ -0,0 +1,31 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Geeetech GT2560 Revision A+ board pin assignments
*/
#include "pins_GT2560_REV_A.h"
#define BOARD_NAME "GT2560 Rev.A+"
#define SERVO0_PIN 11
Loading…
Cancel
Save