Move LPC SD options to configs, add MKS_MINI_DISPLAY to SKR boards (#13712)

Marlin/Configuration_adv.h

@@ -905,6 +905,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

Marlin/src/HAL/HAL_LPC1768/main.cpp

@@ -1,3 +1,24 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
 #ifdef TARGET_LPC1768
 
 #include <usb/usb.h>

Marlin/src/pins/pins_AZTEEG_X5_MINI.h

@@ -185,13 +185,9 @@
 //
 // SD Support
 //
-//#define USB_SD_DISABLED     // Disable host access to SD card as mass storage device through USB
+#if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE)
-//#define USB_SD_ONBOARD      // Enable host access to SD card as mass storage device through USB
+  #define LPC_SD_ONBOARD
-
+#endif
-//#define LPC_SD_LCD          // Marlin uses the SD drive attached to the LCD
-#define LPC_SD_ONBOARD        // Marlin uses the SD drive on the control board.  There is no SD detect pin
-                              // for the onboard card.  Init card from LCD menu or send M21 whenever printer
-                              // is powered on to enable SD access.
 
 #if ENABLED(LPC_SD_LCD)
 

Marlin/src/pins/pins_BIGTREE_SKR_V1.3.h

@@ -208,15 +208,24 @@
       #define LCD_PINS_D7   P1_23
     #endif
 
+    #if ENABLED(MKS_MINI_12864)
+      #define DOGLCD_CS     P1_21
+      #define DOGLCD_A0     P1_22
+    #endif
+
   #endif
 
 #endif // ULTRA_LCD
 
-//#define USB_SD_DISABLED
+//
-#define USB_SD_ONBOARD        // Provide the onboard SD card to the host as a USB mass storage device
+// SD Support
+//
 
-#define LPC_SD_LCD            // Marlin uses the SD drive attached to the LCD
+#if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE)
-//#define LPC_SD_ONBOARD        // Marlin uses the SD drive on the control board
+  #undef USB_SD_DISABLED
+  #define USB_SD_ONBOARD
+  #define LPC_SD_LCD
+#endif
 
 #if ENABLED(LPC_SD_LCD)
 

Marlin/src/pins/pins_BIQU_SKR_V1.1.h

@@ -105,18 +105,29 @@
   #define LCD_PINS_RS      P0_16
   #define LCD_PINS_ENABLE  P0_18
   #define LCD_PINS_D4      P0_15
+
+  #if ENABLED(MKS_MINI_12864)
+    #define DOGLCD_CS      P2_06
+    #define DOGLCD_A0      P0_16
+  #endif
 #endif
 
 //
 // SD Support
 //
-//#define USB_SD_DISABLED     // Disable host access to SD card as mass storage device through USB
+// MKS_MINI_12864 strongly prefers the SD card on the display and
-#define USB_SD_ONBOARD        // Enable host access to SD card as mass storage device through USB
+// requires jumpers on the SKR V1.1 board as documented here:
-
+// https://www.facebook.com/groups/505736576548648/permalink/630639874058317/
-//#define LPC_SD_LCD          // Marlin uses the SD drive attached to the LCD
+#if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE)
-#define LPC_SD_ONBOARD        // Marlin uses the SD drive on the control board.  There is no SD detect pin
+  #if ENABLED(MKS_MINI_12864)
-                              // for the onboard card.  Init card from LCD menu or send M21 whenever printer
+    #define LPC_SD_LCD
-                              // is powered on to enable SD access.
+    #undef USB_SD_DISABLED
+    #define USB_SD_ONBOARD
+  #else
+    #define USB_SD_ONBOARD
+    #define LPC_SD_ONBOARD
+  #endif
+#endif
 
 #if ENABLED(LPC_SD_LCD)
 

Marlin/src/pins/pins_MKS_SBASE.h

@@ -158,23 +158,11 @@
 #define ENET_TXD0          P1_00   // J12-11
 #define ENET_TXD1          P1_01   // J12-12
 
-/**
+#if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE)
- * The SBase can share the on-board SD card with a PC via USB the following
+  #undef USB_SD_DISABLED
- * definitions control this feature:
+  #define USB_SD_ONBOARD
- */
+  #define LPC_SD_ONBOARD
-//#define USB_SD_DISABLED
+#endif
-#define USB_SD_ONBOARD        // Provide the onboard SD card to the host as a USB mass storage device
-
-/**
- * There are a number of configurations available for the SBase SD card reader.
- * - A custom cable can be used to allow access to the LCD based SD card.
- * - A standard cable can be used for access to the LCD SD card (but no SD detect).
- * - The onboard SD card can be used and optionally shared with a PC via USB.
- */
-
-//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD
-//#define LPC_SD_LCD          // Marlin uses the SD drive attached to the LCD
-#define LPC_SD_ONBOARD        // Marlin uses the SD drive attached to the control board
 
 #if ENABLED(LPC_SD_CUSTOM_CABLE)
 

Marlin/src/pins/pins_RAMPS_RE_ARM.h

@@ -361,11 +361,14 @@
 #define ENET_TXD0          P1_00   // (78)  J12-11
 #define ENET_TXD1          P1_01   // (79)  J12-12
 
-//#define USB_SD_DISABLED
+//
-#define USB_SD_ONBOARD        // Provide the onboard SD card to the host as a USB mass storage device
+// SD Support
-
+//
-//#define LPC_SD_LCD          // Marlin uses the SD drive attached to the LCD
+#if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE)
-#define LPC_SD_ONBOARD        // Marlin uses the SD drive on the control board
+  #undef USB_SD_DISABLED
+  #define USB_SD_ONBOARD
+  #define LPC_SD_ONBOARD
+#endif
 
 #if ENABLED(LPC_SD_LCD)
 

config/default/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/3DFabXYZ/Migbot/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/AliExpress/UM2pExt/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Anet/A2/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Anet/A2plus/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Anet/A6/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Anet/A8/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/AnyCubic/i3/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/ArmEd/Configuration_adv.h

@@ -911,6 +911,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/BQ/Hephestos/Configuration_adv.h

@@ -904,6 +904,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -912,6 +912,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/BQ/WITBOX/Configuration_adv.h

@@ -904,6 +904,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Cartesio/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Creality/CR-10/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Creality/CR-10S/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Creality/CR-10_5S/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Creality/CR-8/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Creality/Ender-2/Configuration_adv.h

@@ -904,6 +904,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Creality/Ender-3/Configuration_adv.h

@@ -904,6 +904,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Creality/Ender-4/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Einstart-S/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Felix/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/FlashForge/CreatorPro/Configuration_adv.h

@@ -903,6 +903,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Formbot/Raptor/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Formbot/T_Rex_2+/Configuration_adv.h

@@ -911,6 +911,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Formbot/T_Rex_3/Configuration_adv.h

@@ -911,6 +911,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Geeetech/A10M/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Geeetech/A20M/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Geeetech/MeCreator2/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/JGAurora/A5/Configuration_adv.h

@@ -904,6 +904,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/MakerParts/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Malyan/M150/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Malyan/M200/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Mks/Robin/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Mks/Sbase/Configuration_adv.h

@@ -908,6 +908,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/RapideLite/RL200/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/RigidBot/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/SCARA/Configuration_adv.h

@@ -904,6 +904,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h

@@ -904,6 +904,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Sanguinololu/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/TheBorg/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/TinyBoy2/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Tronxy/X3A/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Tronxy/X5S-2E/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/UltiMachine/Archim1/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/VORONDesign/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Velleman/K8200/Configuration_adv.h

@@ -920,6 +920,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Velleman/K8400/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/WASP/PowerWASP/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/Wanhao/Duplicator 6/Configuration_adv.h

@@ -906,6 +906,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/delta/Anycubic/Kossel/Configuration_adv.h

@@ -906,6 +906,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -906,6 +906,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/delta/FLSUN/kossel/Configuration_adv.h

@@ -906,6 +906,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -906,6 +906,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h

@@ -906,6 +906,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/delta/MKS/SBASE/Configuration_adv.h

@@ -906,6 +906,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/delta/Tevo Little Monster/Configuration_adv.h

@@ -906,6 +906,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/delta/generic/Configuration_adv.h

@@ -906,6 +906,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/delta/kossel_mini/Configuration_adv.h

@@ -905,6 +905,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/delta/kossel_xl/Configuration_adv.h

@@ -906,6 +906,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/gCreate/gMax1.5+/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/makibox/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/tvrrug/Round2/Configuration_adv.h

@@ -907,6 +907,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**

config/examples/wt150/Configuration_adv.h

@@ -908,6 +908,17 @@
   // Add an optimized binary file transfer mode, initiated with 'M28 B1'
   //#define BINARY_FILE_TRANSFER
 
+  // LPC-based boards have on-board SD Card options. Override here or defaults apply.
+  #ifdef TARGET_LPC1768
+    //#define LPC_SD_LCD          // Use the SD drive in the external LCD controller.
+    //#define LPC_SD_ONBOARD      // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+    //#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
+    //#define USB_SD_DISABLED     // Disable SD Card access over USB (for security).
+    #if ENABLED(LPC_SD_ONBOARD)
+      //#define USB_SD_ONBOARD    // Provide the onboard SD card to the host as a USB mass storage device.
+    #endif
+  #endif
+
 #endif // SDSUPPORT
 
 /**