Scott Lahteine
12 years ago
22 changed files with 3221 additions and 996 deletions
@ -0,0 +1,339 @@ |
|||
/*
|
|||
Servo.cpp - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2 |
|||
Copyright (c) 2009 Michael Margolis. All right reserved. |
|||
|
|||
This library is free software; you can redistribute it and/or |
|||
modify it under the terms of the GNU Lesser General Public |
|||
License as published by the Free Software Foundation; either |
|||
version 2.1 of the License, or (at your option) any later version. |
|||
|
|||
This library is distributed in the hope that it will be useful, |
|||
but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
|||
Lesser General Public License for more details. |
|||
|
|||
You should have received a copy of the GNU Lesser General Public |
|||
License along with this library; if not, write to the Free Software |
|||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
|||
*/ |
|||
|
|||
/*
|
|||
|
|||
A servo is activated by creating an instance of the Servo class passing the desired pin to the attach() method. |
|||
The servos are pulsed in the background using the value most recently written using the write() method |
|||
|
|||
Note that analogWrite of PWM on pins associated with the timer are disabled when the first servo is attached. |
|||
Timers are seized as needed in groups of 12 servos - 24 servos use two timers, 48 servos will use four. |
|||
|
|||
The methods are: |
|||
|
|||
Servo - Class for manipulating servo motors connected to Arduino pins. |
|||
|
|||
attach(pin ) - Attaches a servo motor to an i/o pin. |
|||
attach(pin, min, max ) - Attaches to a pin setting min and max values in microseconds |
|||
default min is 544, max is 2400 |
|||
|
|||
write() - Sets the servo angle in degrees. (invalid angle that is valid as pulse in microseconds is treated as microseconds) |
|||
writeMicroseconds() - Sets the servo pulse width in microseconds |
|||
read() - Gets the last written servo pulse width as an angle between 0 and 180. |
|||
readMicroseconds() - Gets the last written servo pulse width in microseconds. (was read_us() in first release) |
|||
attached() - Returns true if there is a servo attached. |
|||
detach() - Stops an attached servos from pulsing its i/o pin. |
|||
|
|||
*/ |
|||
#ifdef NUM_SERVOS |
|||
#include <avr/interrupt.h> |
|||
#include <Arduino.h> |
|||
|
|||
#include "Servo.h" |
|||
|
|||
#define usToTicks(_us) (( clockCyclesPerMicrosecond()* _us) / 8) // converts microseconds to tick (assumes prescale of 8) // 12 Aug 2009
|
|||
#define ticksToUs(_ticks) (( (unsigned)_ticks * 8)/ clockCyclesPerMicrosecond() ) // converts from ticks back to microseconds
|
|||
|
|||
|
|||
#define TRIM_DURATION 2 // compensation ticks to trim adjust for digitalWrite delays // 12 August 2009
|
|||
|
|||
//#define NBR_TIMERS (MAX_SERVOS / SERVOS_PER_TIMER)
|
|||
|
|||
static servo_t servos[MAX_SERVOS]; // static array of servo structures
|
|||
static volatile int8_t Channel[_Nbr_16timers ]; // counter for the servo being pulsed for each timer (or -1 if refresh interval)
|
|||
|
|||
uint8_t ServoCount = 0; // the total number of attached servos
|
|||
|
|||
|
|||
// convenience macros
|
|||
#define SERVO_INDEX_TO_TIMER(_servo_nbr) ((timer16_Sequence_t)(_servo_nbr / SERVOS_PER_TIMER)) // returns the timer controlling this servo
|
|||
#define SERVO_INDEX_TO_CHANNEL(_servo_nbr) (_servo_nbr % SERVOS_PER_TIMER) // returns the index of the servo on this timer
|
|||
#define SERVO_INDEX(_timer,_channel) ((_timer*SERVOS_PER_TIMER) + _channel) // macro to access servo index by timer and channel
|
|||
#define SERVO(_timer,_channel) (servos[SERVO_INDEX(_timer,_channel)]) // macro to access servo class by timer and channel
|
|||
|
|||
#define SERVO_MIN() (MIN_PULSE_WIDTH - this->min * 4) // minimum value in uS for this servo
|
|||
#define SERVO_MAX() (MAX_PULSE_WIDTH - this->max * 4) // maximum value in uS for this servo
|
|||
|
|||
/************ static functions common to all instances ***********************/ |
|||
|
|||
static inline void handle_interrupts(timer16_Sequence_t timer, volatile uint16_t *TCNTn, volatile uint16_t* OCRnA) |
|||
{ |
|||
if( Channel[timer] < 0 ) |
|||
*TCNTn = 0; // channel set to -1 indicated that refresh interval completed so reset the timer
|
|||
else{ |
|||
if( SERVO_INDEX(timer,Channel[timer]) < ServoCount && SERVO(timer,Channel[timer]).Pin.isActive == true ) |
|||
digitalWrite( SERVO(timer,Channel[timer]).Pin.nbr,LOW); // pulse this channel low if activated
|
|||
} |
|||
|
|||
Channel[timer]++; // increment to the next channel
|
|||
if( SERVO_INDEX(timer,Channel[timer]) < ServoCount && Channel[timer] < SERVOS_PER_TIMER) { |
|||
*OCRnA = *TCNTn + SERVO(timer,Channel[timer]).ticks; |
|||
if(SERVO(timer,Channel[timer]).Pin.isActive == true) // check if activated
|
|||
digitalWrite( SERVO(timer,Channel[timer]).Pin.nbr,HIGH); // its an active channel so pulse it high
|
|||
} |
|||
else { |
|||
// finished all channels so wait for the refresh period to expire before starting over
|
|||
if( ((unsigned)*TCNTn) + 4 < usToTicks(REFRESH_INTERVAL) ) // allow a few ticks to ensure the next OCR1A not missed
|
|||
*OCRnA = (unsigned int)usToTicks(REFRESH_INTERVAL); |
|||
else |
|||
*OCRnA = *TCNTn + 4; // at least REFRESH_INTERVAL has elapsed
|
|||
Channel[timer] = -1; // this will get incremented at the end of the refresh period to start again at the first channel
|
|||
} |
|||
} |
|||
|
|||
#ifndef WIRING // Wiring pre-defines signal handlers so don't define any if compiling for the Wiring platform
|
|||
// Interrupt handlers for Arduino
|
|||
#if defined(_useTimer1) |
|||
SIGNAL (TIMER1_COMPA_vect) |
|||
{ |
|||
handle_interrupts(_timer1, &TCNT1, &OCR1A); |
|||
} |
|||
#endif |
|||
|
|||
#if defined(_useTimer3) |
|||
SIGNAL (TIMER3_COMPA_vect) |
|||
{ |
|||
handle_interrupts(_timer3, &TCNT3, &OCR3A); |
|||
} |
|||
#endif |
|||
|
|||
#if defined(_useTimer4) |
|||
SIGNAL (TIMER4_COMPA_vect) |
|||
{ |
|||
handle_interrupts(_timer4, &TCNT4, &OCR4A); |
|||
} |
|||
#endif |
|||
|
|||
#if defined(_useTimer5) |
|||
SIGNAL (TIMER5_COMPA_vect) |
|||
{ |
|||
handle_interrupts(_timer5, &TCNT5, &OCR5A); |
|||
} |
|||
#endif |
|||
|
|||
#elif defined WIRING |
|||
// Interrupt handlers for Wiring
|
|||
#if defined(_useTimer1) |
|||
void Timer1Service() |
|||
{ |
|||
handle_interrupts(_timer1, &TCNT1, &OCR1A); |
|||
} |
|||
#endif |
|||
#if defined(_useTimer3) |
|||
void Timer3Service() |
|||
{ |
|||
handle_interrupts(_timer3, &TCNT3, &OCR3A); |
|||
} |
|||
#endif |
|||
#endif |
|||
|
|||
|
|||
static void initISR(timer16_Sequence_t timer) |
|||
{ |
|||
#if defined (_useTimer1) |
|||
if(timer == _timer1) { |
|||
TCCR1A = 0; // normal counting mode
|
|||
TCCR1B = _BV(CS11); // set prescaler of 8
|
|||
TCNT1 = 0; // clear the timer count
|
|||
#if defined(__AVR_ATmega8__)|| defined(__AVR_ATmega128__) |
|||
TIFR |= _BV(OCF1A); // clear any pending interrupts;
|
|||
TIMSK |= _BV(OCIE1A) ; // enable the output compare interrupt
|
|||
#else |
|||
// here if not ATmega8 or ATmega128
|
|||
TIFR1 |= _BV(OCF1A); // clear any pending interrupts;
|
|||
TIMSK1 |= _BV(OCIE1A) ; // enable the output compare interrupt
|
|||
#endif |
|||
#if defined(WIRING) |
|||
timerAttach(TIMER1OUTCOMPAREA_INT, Timer1Service); |
|||
#endif |
|||
} |
|||
#endif |
|||
|
|||
#if defined (_useTimer3) |
|||
if(timer == _timer3) { |
|||
TCCR3A = 0; // normal counting mode
|
|||
TCCR3B = _BV(CS31); // set prescaler of 8
|
|||
TCNT3 = 0; // clear the timer count
|
|||
#if defined(__AVR_ATmega128__) |
|||
TIFR |= _BV(OCF3A); // clear any pending interrupts;
|
|||
ETIMSK |= _BV(OCIE3A); // enable the output compare interrupt
|
|||
#else |
|||
TIFR3 = _BV(OCF3A); // clear any pending interrupts;
|
|||
TIMSK3 = _BV(OCIE3A) ; // enable the output compare interrupt
|
|||
#endif |
|||
#if defined(WIRING) |
|||
timerAttach(TIMER3OUTCOMPAREA_INT, Timer3Service); // for Wiring platform only
|
|||
#endif |
|||
} |
|||
#endif |
|||
|
|||
#if defined (_useTimer4) |
|||
if(timer == _timer4) { |
|||
TCCR4A = 0; // normal counting mode
|
|||
TCCR4B = _BV(CS41); // set prescaler of 8
|
|||
TCNT4 = 0; // clear the timer count
|
|||
TIFR4 = _BV(OCF4A); // clear any pending interrupts;
|
|||
TIMSK4 = _BV(OCIE4A) ; // enable the output compare interrupt
|
|||
} |
|||
#endif |
|||
|
|||
#if defined (_useTimer5) |
|||
if(timer == _timer5) { |
|||
TCCR5A = 0; // normal counting mode
|
|||
TCCR5B = _BV(CS51); // set prescaler of 8
|
|||
TCNT5 = 0; // clear the timer count
|
|||
TIFR5 = _BV(OCF5A); // clear any pending interrupts;
|
|||
TIMSK5 = _BV(OCIE5A) ; // enable the output compare interrupt
|
|||
} |
|||
#endif |
|||
} |
|||
|
|||
static void finISR(timer16_Sequence_t timer) |
|||
{ |
|||
//disable use of the given timer
|
|||
#if defined WIRING // Wiring
|
|||
if(timer == _timer1) { |
|||
#if defined(__AVR_ATmega1281__)||defined(__AVR_ATmega2561__) |
|||
TIMSK1 &= ~_BV(OCIE1A) ; // disable timer 1 output compare interrupt
|
|||
#else |
|||
TIMSK &= ~_BV(OCIE1A) ; // disable timer 1 output compare interrupt
|
|||
#endif |
|||
timerDetach(TIMER1OUTCOMPAREA_INT); |
|||
} |
|||
else if(timer == _timer3) { |
|||
#if defined(__AVR_ATmega1281__)||defined(__AVR_ATmega2561__) |
|||
TIMSK3 &= ~_BV(OCIE3A); // disable the timer3 output compare A interrupt
|
|||
#else |
|||
ETIMSK &= ~_BV(OCIE3A); // disable the timer3 output compare A interrupt
|
|||
#endif |
|||
timerDetach(TIMER3OUTCOMPAREA_INT); |
|||
} |
|||
#else |
|||
//For arduino - in future: call here to a currently undefined function to reset the timer
|
|||
#endif |
|||
} |
|||
|
|||
static boolean isTimerActive(timer16_Sequence_t timer) |
|||
{ |
|||
// returns true if any servo is active on this timer
|
|||
for(uint8_t channel=0; channel < SERVOS_PER_TIMER; channel++) { |
|||
if(SERVO(timer,channel).Pin.isActive == true) |
|||
return true; |
|||
} |
|||
return false; |
|||
} |
|||
|
|||
|
|||
/****************** end of static functions ******************************/ |
|||
|
|||
Servo::Servo() |
|||
{ |
|||
if( ServoCount < MAX_SERVOS) { |
|||
this->servoIndex = ServoCount++; // assign a servo index to this instance
|
|||
servos[this->servoIndex].ticks = usToTicks(DEFAULT_PULSE_WIDTH); // store default values - 12 Aug 2009
|
|||
} |
|||
else |
|||
this->servoIndex = INVALID_SERVO ; // too many servos
|
|||
} |
|||
|
|||
uint8_t Servo::attach(int pin) |
|||
{ |
|||
return this->attach(pin, MIN_PULSE_WIDTH, MAX_PULSE_WIDTH); |
|||
} |
|||
|
|||
uint8_t Servo::attach(int pin, int min, int max) |
|||
{ |
|||
if(this->servoIndex < MAX_SERVOS ) { |
|||
pinMode( pin, OUTPUT) ; // set servo pin to output
|
|||
servos[this->servoIndex].Pin.nbr = pin; |
|||
// todo min/max check: abs(min - MIN_PULSE_WIDTH) /4 < 128
|
|||
this->min = (MIN_PULSE_WIDTH - min)/4; //resolution of min/max is 4 uS
|
|||
this->max = (MAX_PULSE_WIDTH - max)/4; |
|||
// initialize the timer if it has not already been initialized
|
|||
timer16_Sequence_t timer = SERVO_INDEX_TO_TIMER(servoIndex); |
|||
if(isTimerActive(timer) == false) |
|||
initISR(timer); |
|||
servos[this->servoIndex].Pin.isActive = true; // this must be set after the check for isTimerActive
|
|||
} |
|||
return this->servoIndex ; |
|||
} |
|||
|
|||
void Servo::detach() |
|||
{ |
|||
servos[this->servoIndex].Pin.isActive = false; |
|||
timer16_Sequence_t timer = SERVO_INDEX_TO_TIMER(servoIndex); |
|||
if(isTimerActive(timer) == false) { |
|||
finISR(timer); |
|||
} |
|||
} |
|||
|
|||
void Servo::write(int value) |
|||
{ |
|||
if(value < MIN_PULSE_WIDTH) |
|||
{ // treat values less than 544 as angles in degrees (valid values in microseconds are handled as microseconds)
|
|||
if(value < 0) value = 0; |
|||
if(value > 180) value = 180; |
|||
value = map(value, 0, 180, SERVO_MIN(), SERVO_MAX()); |
|||
} |
|||
this->writeMicroseconds(value); |
|||
} |
|||
|
|||
void Servo::writeMicroseconds(int value) |
|||
{ |
|||
// calculate and store the values for the given channel
|
|||
byte channel = this->servoIndex; |
|||
if( (channel < MAX_SERVOS) ) // ensure channel is valid
|
|||
{ |
|||
if( value < SERVO_MIN() ) // ensure pulse width is valid
|
|||
value = SERVO_MIN(); |
|||
else if( value > SERVO_MAX() ) |
|||
value = SERVO_MAX(); |
|||
|
|||
value = value - TRIM_DURATION; |
|||
value = usToTicks(value); // convert to ticks after compensating for interrupt overhead - 12 Aug 2009
|
|||
|
|||
uint8_t oldSREG = SREG; |
|||
cli(); |
|||
servos[channel].ticks = value; |
|||
SREG = oldSREG; |
|||
} |
|||
} |
|||
|
|||
int Servo::read() // return the value as degrees
|
|||
{ |
|||
return map( this->readMicroseconds()+1, SERVO_MIN(), SERVO_MAX(), 0, 180); |
|||
} |
|||
|
|||
int Servo::readMicroseconds() |
|||
{ |
|||
unsigned int pulsewidth; |
|||
if( this->servoIndex != INVALID_SERVO ) |
|||
pulsewidth = ticksToUs(servos[this->servoIndex].ticks) + TRIM_DURATION ; // 12 aug 2009
|
|||
else |
|||
pulsewidth = 0; |
|||
|
|||
return pulsewidth; |
|||
} |
|||
|
|||
bool Servo::attached() |
|||
{ |
|||
return servos[this->servoIndex].Pin.isActive ; |
|||
} |
|||
|
|||
#endif |
|||
@ -0,0 +1,132 @@ |
|||
/*
|
|||
Servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2 |
|||
Copyright (c) 2009 Michael Margolis. All right reserved. |
|||
|
|||
This library is free software; you can redistribute it and/or |
|||
modify it under the terms of the GNU Lesser General Public |
|||
License as published by the Free Software Foundation; either |
|||
version 2.1 of the License, or (at your option) any later version. |
|||
|
|||
This library is distributed in the hope that it will be useful, |
|||
but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
|||
Lesser General Public License for more details. |
|||
|
|||
You should have received a copy of the GNU Lesser General Public |
|||
License along with this library; if not, write to the Free Software |
|||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
|||
*/ |
|||
|
|||
/*
|
|||
|
|||
A servo is activated by creating an instance of the Servo class passing the desired pin to the attach() method. |
|||
The servos are pulsed in the background using the value most recently written using the write() method |
|||
|
|||
Note that analogWrite of PWM on pins associated with the timer are disabled when the first servo is attached. |
|||
Timers are seized as needed in groups of 12 servos - 24 servos use two timers, 48 servos will use four. |
|||
The sequence used to sieze timers is defined in timers.h |
|||
|
|||
The methods are: |
|||
|
|||
Servo - Class for manipulating servo motors connected to Arduino pins. |
|||
|
|||
attach(pin ) - Attaches a servo motor to an i/o pin. |
|||
attach(pin, min, max ) - Attaches to a pin setting min and max values in microseconds |
|||
default min is 544, max is 2400 |
|||
|
|||
write() - Sets the servo angle in degrees. (invalid angle that is valid as pulse in microseconds is treated as microseconds) |
|||
writeMicroseconds() - Sets the servo pulse width in microseconds |
|||
read() - Gets the last written servo pulse width as an angle between 0 and 180. |
|||
readMicroseconds() - Gets the last written servo pulse width in microseconds. (was read_us() in first release) |
|||
attached() - Returns true if there is a servo attached. |
|||
detach() - Stops an attached servos from pulsing its i/o pin. |
|||
*/ |
|||
|
|||
#ifndef Servo_h |
|||
#define Servo_h |
|||
|
|||
#include <inttypes.h> |
|||
|
|||
/*
|
|||
* Defines for 16 bit timers used with Servo library |
|||
* |
|||
* If _useTimerX is defined then TimerX is a 16 bit timer on the curent board |
|||
* timer16_Sequence_t enumerates the sequence that the timers should be allocated |
|||
* _Nbr_16timers indicates how many 16 bit timers are available. |
|||
* |
|||
*/ |
|||
|
|||
// Say which 16 bit timers can be used and in what order
|
|||
#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) |
|||
#define _useTimer5 |
|||
//#define _useTimer1
|
|||
#define _useTimer3 |
|||
#define _useTimer4 |
|||
//typedef enum { _timer5, _timer1, _timer3, _timer4, _Nbr_16timers } timer16_Sequence_t ;
|
|||
typedef enum { _timer5, _timer3, _timer4, _Nbr_16timers } timer16_Sequence_t ; |
|||
|
|||
#elif defined(__AVR_ATmega32U4__) |
|||
//#define _useTimer1
|
|||
#define _useTimer3 |
|||
//typedef enum { _timer1, _Nbr_16timers } timer16_Sequence_t ;
|
|||
typedef enum { _timer3, _Nbr_16timers } timer16_Sequence_t ; |
|||
|
|||
#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__) |
|||
#define _useTimer3 |
|||
//#define _useTimer1
|
|||
//typedef enum { _timer3, _timer1, _Nbr_16timers } timer16_Sequence_t ;
|
|||
typedef enum { _timer3, _Nbr_16timers } timer16_Sequence_t ; |
|||
|
|||
#elif defined(__AVR_ATmega128__) ||defined(__AVR_ATmega1281__)||defined(__AVR_ATmega2561__) |
|||
#define _useTimer3 |
|||
//#define _useTimer1
|
|||
//typedef enum { _timer3, _timer1, _Nbr_16timers } timer16_Sequence_t ;
|
|||
typedef enum { _timer3, _Nbr_16timers } timer16_Sequence_t ; |
|||
|
|||
#else // everything else
|
|||
//#define _useTimer1
|
|||
//typedef enum { _timer1, _Nbr_16timers } timer16_Sequence_t ;
|
|||
typedef enum { _Nbr_16timers } timer16_Sequence_t ; |
|||
#endif |
|||
|
|||
#define Servo_VERSION 2 // software version of this library
|
|||
|
|||
#define MIN_PULSE_WIDTH 544 // the shortest pulse sent to a servo
|
|||
#define MAX_PULSE_WIDTH 2400 // the longest pulse sent to a servo
|
|||
#define DEFAULT_PULSE_WIDTH 1500 // default pulse width when servo is attached
|
|||
#define REFRESH_INTERVAL 20000 // minumim time to refresh servos in microseconds
|
|||
|
|||
#define SERVOS_PER_TIMER 12 // the maximum number of servos controlled by one timer
|
|||
#define MAX_SERVOS (_Nbr_16timers * SERVOS_PER_TIMER) |
|||
|
|||
#define INVALID_SERVO 255 // flag indicating an invalid servo index
|
|||
|
|||
typedef struct { |
|||
uint8_t nbr :6 ; // a pin number from 0 to 63
|
|||
uint8_t isActive :1 ; // true if this channel is enabled, pin not pulsed if false
|
|||
} ServoPin_t ; |
|||
|
|||
typedef struct { |
|||
ServoPin_t Pin; |
|||
unsigned int ticks; |
|||
} servo_t; |
|||
|
|||
class Servo |
|||
{ |
|||
public: |
|||
Servo(); |
|||
uint8_t attach(int pin); // attach the given pin to the next free channel, sets pinMode, returns channel number or 0 if failure
|
|||
uint8_t attach(int pin, int min, int max); // as above but also sets min and max values for writes.
|
|||
void detach(); |
|||
void write(int value); // if value is < 200 its treated as an angle, otherwise as pulse width in microseconds
|
|||
void writeMicroseconds(int value); // Write pulse width in microseconds
|
|||
int read(); // returns current pulse width as an angle between 0 and 180 degrees
|
|||
int readMicroseconds(); // returns current pulse width in microseconds for this servo (was read_us() in first release)
|
|||
bool attached(); // return true if this servo is attached, otherwise false
|
|||
private: |
|||
uint8_t servoIndex; // index into the channel data for this servo
|
|||
int8_t min; // minimum is this value times 4 added to MIN_PULSE_WIDTH
|
|||
int8_t max; // maximum is this value times 4 added to MAX_PULSE_WIDTH
|
|||
}; |
|||
|
|||
#endif |
|||
@ -0,0 +1,131 @@ |
|||
#ifndef ULCDST7920_H |
|||
#define ULCDST7920_H |
|||
|
|||
#include "Marlin.h" |
|||
|
|||
#ifdef U8GLIB_ST7920 |
|||
|
|||
//set optimization so ARDUINO optimizes this file
|
|||
#pragma GCC optimize (3) |
|||
|
|||
#define ST7920_CLK_PIN LCD_PINS_D4 |
|||
#define ST7920_DAT_PIN LCD_PINS_ENABLE |
|||
#define ST7920_CS_PIN LCD_PINS_RS |
|||
|
|||
//#define PAGE_HEIGHT 8 //128 byte frambuffer
|
|||
//#define PAGE_HEIGHT 16 //256 byte frambuffer
|
|||
#define PAGE_HEIGHT 32 //512 byte framebuffer
|
|||
|
|||
#define WIDTH 128 |
|||
#define HEIGHT 64 |
|||
|
|||
#include <U8glib.h> |
|||
|
|||
static void ST7920_SWSPI_SND_8BIT(uint8_t val) |
|||
{ |
|||
uint8_t i; |
|||
for( i=0; i<8; i++ ) |
|||
{ |
|||
WRITE(ST7920_CLK_PIN,0); |
|||
WRITE(ST7920_DAT_PIN,val&0x80); |
|||
val<<=1; |
|||
WRITE(ST7920_CLK_PIN,1); |
|||
} |
|||
} |
|||
|
|||
#define ST7920_CS() {WRITE(ST7920_CS_PIN,1);u8g_10MicroDelay();} |
|||
#define ST7920_NCS() {WRITE(ST7920_CS_PIN,0);} |
|||
#define ST7920_SET_CMD() {ST7920_SWSPI_SND_8BIT(0xf8);u8g_10MicroDelay();} |
|||
#define ST7920_SET_DAT() {ST7920_SWSPI_SND_8BIT(0xfa);u8g_10MicroDelay();} |
|||
#define ST7920_WRITE_BYTE(a) {ST7920_SWSPI_SND_8BIT((a)&0xf0);ST7920_SWSPI_SND_8BIT((a)<<4);u8g_10MicroDelay();} |
|||
#define ST7920_WRITE_BYTES(p,l) {uint8_t i;for(i=0;i<l;i++){ST7920_SWSPI_SND_8BIT(*p&0xf0);ST7920_SWSPI_SND_8BIT(*p<<4);p++;}u8g_10MicroDelay();} |
|||
|
|||
uint8_t u8g_dev_rrd_st7920_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) |
|||
{ |
|||
uint8_t i,y; |
|||
switch(msg) |
|||
{ |
|||
case U8G_DEV_MSG_INIT: |
|||
{ |
|||
SET_OUTPUT(ST7920_CS_PIN); |
|||
WRITE(ST7920_CS_PIN,0); |
|||
SET_OUTPUT(ST7920_DAT_PIN); |
|||
WRITE(ST7920_DAT_PIN,0); |
|||
SET_OUTPUT(ST7920_CLK_PIN); |
|||
WRITE(ST7920_CLK_PIN,1); |
|||
|
|||
ST7920_CS(); |
|||
u8g_Delay(90); //initial delay for boot up
|
|||
ST7920_SET_CMD(); |
|||
ST7920_WRITE_BYTE(0x08); //display off, cursor+blink off
|
|||
ST7920_WRITE_BYTE(0x01); //clear CGRAM ram
|
|||
u8g_Delay(10); //delay for cgram clear
|
|||
ST7920_WRITE_BYTE(0x3E); //extended mode + gdram active
|
|||
for(y=0;y<HEIGHT/2;y++) //clear GDRAM
|
|||
{ |
|||
ST7920_WRITE_BYTE(0x80|y); //set y
|
|||
ST7920_WRITE_BYTE(0x80); //set x = 0
|
|||
ST7920_SET_DAT(); |
|||
for(i=0;i<2*WIDTH/8;i++) //2x width clears both segments
|
|||
ST7920_WRITE_BYTE(0); |
|||
ST7920_SET_CMD(); |
|||
} |
|||
ST7920_WRITE_BYTE(0x0C); //display on, cursor+blink off
|
|||
ST7920_NCS(); |
|||
} |
|||
break; |
|||
|
|||
case U8G_DEV_MSG_STOP: |
|||
break; |
|||
case U8G_DEV_MSG_PAGE_NEXT: |
|||
{ |
|||
uint8_t *ptr; |
|||
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem); |
|||
y = pb->p.page_y0; |
|||
ptr = (uint8_t*)pb->buf; |
|||
|
|||
ST7920_CS(); |
|||
for( i = 0; i < PAGE_HEIGHT; i ++ ) |
|||
{ |
|||
ST7920_SET_CMD(); |
|||
if ( y < 32 ) |
|||
{ |
|||
ST7920_WRITE_BYTE(0x80 | y); //y
|
|||
ST7920_WRITE_BYTE(0x80); //x=0
|
|||
} |
|||
else |
|||
{ |
|||
ST7920_WRITE_BYTE(0x80 | (y-32)); //y
|
|||
ST7920_WRITE_BYTE(0x80 | 8); //x=64
|
|||
} |
|||
|
|||
ST7920_SET_DAT(); |
|||
ST7920_WRITE_BYTES(ptr,WIDTH/8); //ptr is incremented inside of macro
|
|||
y++; |
|||
} |
|||
ST7920_NCS(); |
|||
} |
|||
break; |
|||
} |
|||
#if PAGE_HEIGHT == 8 |
|||
return u8g_dev_pb8h1_base_fn(u8g, dev, msg, arg); |
|||
#elif PAGE_HEIGHT == 16 |
|||
return u8g_dev_pb16h1_base_fn(u8g, dev, msg, arg); |
|||
#else |
|||
return u8g_dev_pb32h1_base_fn(u8g, dev, msg, arg); |
|||
#endif |
|||
} |
|||
|
|||
uint8_t u8g_dev_st7920_128x64_rrd_buf[WIDTH*(PAGE_HEIGHT/8)] U8G_NOCOMMON; |
|||
u8g_pb_t u8g_dev_st7920_128x64_rrd_pb = {{PAGE_HEIGHT,HEIGHT,0,0,0},WIDTH,u8g_dev_st7920_128x64_rrd_buf}; |
|||
u8g_dev_t u8g_dev_st7920_128x64_rrd_sw_spi = {u8g_dev_rrd_st7920_128x64_fn,&u8g_dev_st7920_128x64_rrd_pb,&u8g_com_null_fn}; |
|||
|
|||
class U8GLIB_ST7920_128X64_RRD : public U8GLIB |
|||
{ |
|||
public: |
|||
U8GLIB_ST7920_128X64_RRD(uint8_t dummy) : U8GLIB(&u8g_dev_st7920_128x64_rrd_sw_spi) {} |
|||
}; |
|||
|
|||
|
|||
#endif //U8GLIB_ST7920
|
|||
#endif //ULCDST7920_H
|
|||
Loading…
Reference in new issue