andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

[2.0.x] 6th-order jerk-controlled motion planning in real-time for AVR (#10373)

pull/1/head
Eduardo José Tagle 7 years ago
committed by Scott Lahteine
parent
5676b187b4
commit
57a899a412
5 changed files with 1268 additions and 129 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 2
      Marlin/src/inc/SanityCheck.h
  2. 530
      Marlin/src/module/planner.cpp
  3. 4
      Marlin/src/module/planner.h
  4. 702
      Marlin/src/module/stepper.cpp
  5. 9
      Marlin/src/module/stepper.h

2
Marlin/src/inc/SanityCheck.h
View File

@ -99,8 +99,6 @@
#error "Z_ENDSTOP_SERVO_NR is now Z_PROBE_SERVO_NR. Please update your configuration."
#elif defined(DEFAULT_XYJERK)
#error "DEFAULT_XYJERK is deprecated. Use DEFAULT_XJERK and DEFAULT_YJERK instead."
#elif ENABLED(BEZIER_JERK_CONTROL) && !defined(CPU_32_BIT)
#error "BEZIER_JERK_CONTROL is computationally intensive and requires a 32-bit board."
#elif defined(XY_TRAVEL_SPEED)
#error "XY_TRAVEL_SPEED is deprecated. Use XY_PROBE_SPEED instead."
#elif defined(PROBE_SERVO_DEACTIVATION_DELAY)

530
Marlin/src/module/planner.cpp
View File

@ -56,6 +56,10 @@
*
* IntersectionDistance[s1_, s2_, a_, d_] := (2 a d - s1^2 + s2^2)/(4 a)
*
* --
*
* The fast inverse function needed for Bézier interpolation for AVR
* was designed, written and tested by Eduardo José Tagle on April/2018
*/
#include "planner.h"
@ -215,6 +219,523 @@ void Planner::init() {
#endif
}
#if ENABLED(BEZIER_JERK_CONTROL)
#ifdef __AVR__
// This routine, for AVR, returns 0x1000000 / d, but trying to get the inverse as
// fast as possible. A fast converging iterative Newton-Raphson method is able to
// reach full precision in just 1 iteration, and takes 211 cycles (worst case, mean
// case is less, up to 30 cycles for small divisors), instead of the 500 cycles a
// normal division would take.
//
// Inspired by the following page,
// https://stackoverflow.com/questions/27801397/newton-raphson-division-with-big-integers
//
// Suppose we want to calculate
// floor(2 ^ k / B) where B is a positive integer
// Then
// B must be <= 2^k, otherwise, the quotient is 0.
//
// The Newton - Raphson iteration for x = B / 2 ^ k yields:
// q[n + 1] = q[n] * (2 - q[n] * B / 2 ^ k)
//
// We can rearrange it as:
// q[n + 1] = q[n] * (2 ^ (k + 1) - q[n] * B) >> k
//
// Each iteration of this kind requires only integer multiplications
// and bit shifts.
// Does it converge to floor(2 ^ k / B) ?: Not necessarily, but, in
// the worst case, it eventually alternates between floor(2 ^ k / B)
// and ceiling(2 ^ k / B)).
// So we can use some not-so-clever test to see if we are in this
// case, and extract floor(2 ^ k / B).
// Lastly, a simple but important optimization for this approach is to
// truncate multiplications (i.e.calculate only the higher bits of the
// product) in the early iterations of the Newton - Raphson method.The
// reason to do so, is that the results of the early iterations are far
// from the quotient, and it doesn't matter to perform them inaccurately.
// Finally, we should pick a good starting value for x. Knowing how many
// digits the divisor has, we can estimate it:
//
// 2^k / x = 2 ^ log2(2^k / x)
// 2^k / x = 2 ^(log2(2^k)-log2(x))
// 2^k / x = 2 ^(k*log2(2)-log2(x))
// 2^k / x = 2 ^ (k-log2(x))
// 2^k / x >= 2 ^ (k-floor(log2(x)))
// floor(log2(x)) simply is the index of the most significant bit set.
//
// If we could improve this estimation even further, then the number of
// iterations can be dropped quite a bit, thus saving valuable execution time.
// The paper "Software Integer Division" by Thomas L.Rodeheffer, Microsoft
// Research, Silicon Valley,August 26, 2008, that is available at
// https://www.microsoft.com/en-us/research/wp-content/uploads/2008/08/tr-2008-141.pdf
// suggests , for its integer division algorithm, that using a table to supply the
// first 8 bits of precision, and due to the quadratic convergence nature of the
// Newton-Raphon iteration, then just 2 iterations should be enough to get
// maximum precision of the division.
// If we precompute values of inverses for small denominator values, then
// just one Newton-Raphson iteration is enough to reach full precision
// We will use the top 9 bits of the denominator as index.
//
// The AVR assembly function is implementing the following C code, included
// here as reference:
//
// uint32_t get_period_inverse(uint32_t d) {
// static const uint8_t inv_tab[256] = {
// 255,253,252,250,248,246,244,242,240,238,236,234,233,231,229,227,
// 225,224,222,220,218,217,215,213,212,210,208,207,205,203,202,200,
// 199,197,195,194,192,191,189,188,186,185,183,182,180,179,178,176,
// 175,173,172,170,169,168,166,165,164,162,161,160,158,157,156,154,
// 153,152,151,149,148,147,146,144,143,142,141,139,138,137,136,135,
// 134,132,131,130,129,128,127,126,125,123,122,121,120,119,118,117,
// 116,115,114,113,112,111,110,109,108,107,106,105,104,103,102,101,
// 100,99,98,97,96,95,94,93,92,91,90,89,88,88,87,86,
// 85,84,83,82,81,80,80,79,78,77,76,75,74,74,73,72,
// 71,70,70,69,68,67,66,66,65,64,63,62,62,61,60,59,
// 59,58,57,56,56,55,54,53,53,52,51,50,50,49,48,48,
// 47,46,46,45,44,43,43,42,41,41,40,39,39,38,37,37,
// 36,35,35,34,33,33,32,32,31,30,30,29,28,28,27,27,
// 26,25,25,24,24,23,22,22,21,21,20,19,19,18,18,17,
// 17,16,15,15,14,14,13,13,12,12,11,10,10,9,9,8,
// 8,7,7,6,6,5,5,4,4,3,3,2,2,1,0,0
// };
//
// // For small denominators, it is cheaper to directly store the result,
// // because those denominators would require 2 Newton-Raphson iterations
// // to converge to the required result precision. For bigger ones, just
// // ONE Newton-Raphson iteration is enough to get maximum precision!
// static const uint32_t small_inv_tab[111] PROGMEM = {
// 16777216,16777216,8388608,5592405,4194304,3355443,2796202,2396745,2097152,1864135,1677721,1525201,1398101,1290555,1198372,1118481,
// 1048576,986895,932067,883011,838860,798915,762600,729444,699050,671088,645277,621378,599186,578524,559240,541200,
// 524288,508400,493447,479349,466033,453438,441505,430185,419430,409200,399457,390167,381300,372827,364722,356962,
// 349525,342392,335544,328965,322638,316551,310689,305040,299593,294337,289262,284359,279620,275036,270600,266305,
// 262144,258111,254200,250406,246723,243148,239674,236298,233016,229824,226719,223696,220752,217885,215092,212369,
// 209715,207126,204600,202135,199728,197379,195083,192841,190650,188508,186413,184365,182361,180400,178481,176602,
// 174762,172960,171196,169466,167772,166111,164482,162885,161319,159783,158275,156796,155344,153919,152520
// };
//
// // For small divisors, it is best to directly retrieve the results
// if (d <= 110)
// return pgm_read_dword(&small_inv_tab[d]);
//
// // Compute initial estimation of 0x1000000/x -
// // Get most significant bit set on divider
// uint8_t idx = 0;
// uint32_t nr = d;
// if (!(nr & 0xff0000)) {
// nr <<= 8;
// idx += 8;
// if (!(nr & 0xff0000)) {
// nr <<= 8;
// idx += 8;
// }
// }
// if (!(nr & 0xf00000)) {
// nr <<= 4;
// idx += 4;
// }
// if (!(nr & 0xc00000)) {
// nr <<= 2;
// idx += 2;
// }
// if (!(nr & 0x800000)) {
// nr <<= 1;
// idx += 1;
// }
//
// // Isolate top 9 bits of the denominator, to be used as index into the initial estimation table
// uint32_t tidx = nr >> 15; // top 9 bits. bit8 is always set
// uint32_t ie = inv_tab[tidx & 0xFF] + 256; // Get the table value. bit9 is always set
// uint32_t x = idx <= 8 ? (ie >> (8 - idx)) : (ie << (idx - 8)); // Position the estimation at the proper place
//
// // Now, refine estimation by newton-raphson. 1 iteration is enough
// x = uint32_t((x * uint64_t((1 << 25) - x * d)) >> 24);
//
// // Estimate remainder
// uint32_t r = (1 << 24) - x * d;
//
// // Check if we must adjust result
// if (r >= d) x++;
//
// // x holds the proper estimation
// return uint32_t(x);
// }
//
static uint32_t get_period_inverse(uint32_t d) {
static const uint8_t inv_tab[256] PROGMEM = {
255,253,252,250,248,246,244,242,240,238,236,234,233,231,229,227,
225,224,222,220,218,217,215,213,212,210,208,207,205,203,202,200,
199,197,195,194,192,191,189,188,186,185,183,182,180,179,178,176,
175,173,172,170,169,168,166,165,164,162,161,160,158,157,156,154,
153,152,151,149,148,147,146,144,143,142,141,139,138,137,136,135,
134,132,131,130,129,128,127,126,125,123,122,121,120,119,118,117,
116,115,114,113,112,111,110,109,108,107,106,105,104,103,102,101,
100,99,98,97,96,95,94,93,92,91,90,89,88,88,87,86,
85,84,83,82,81,80,80,79,78,77,76,75,74,74,73,72,
71,70,70,69,68,67,66,66,65,64,63,62,62,61,60,59,
59,58,57,56,56,55,54,53,53,52,51,50,50,49,48,48,
47,46,46,45,44,43,43,42,41,41,40,39,39,38,37,37,
36,35,35,34,33,33,32,32,31,30,30,29,28,28,27,27,
26,25,25,24,24,23,22,22,21,21,20,19,19,18,18,17,
17,16,15,15,14,14,13,13,12,12,11,10,10,9,9,8,
8,7,7,6,6,5,5,4,4,3,3,2,2,1,0,0
};
// For small denominators, it is cheaper to directly store the result.
// For bigger ones, just ONE Newton-Raphson iteration is enough to get
// maximum precision we need
static const uint32_t small_inv_tab[111] PROGMEM = {
16777216,16777216,8388608,5592405,4194304,3355443,2796202,2396745,2097152,1864135,1677721,1525201,1398101,1290555,1198372,1118481,
1048576,986895,932067,883011,838860,798915,762600,729444,699050,671088,645277,621378,599186,578524,559240,541200,
524288,508400,493447,479349,466033,453438,441505,430185,419430,409200,399457,390167,381300,372827,364722,356962,
349525,342392,335544,328965,322638,316551,310689,305040,299593,294337,289262,284359,279620,275036,270600,266305,
262144,258111,254200,250406,246723,243148,239674,236298,233016,229824,226719,223696,220752,217885,215092,212369,
209715,207126,204600,202135,199728,197379,195083,192841,190650,188508,186413,184365,182361,180400,178481,176602,
174762,172960,171196,169466,167772,166111,164482,162885,161319,159783,158275,156796,155344,153919,152520
};
// For small divisors, it is best to directly retrieve the results
if (d <= 110)
return pgm_read_dword(&small_inv_tab[d]);
register uint8_t r8 = d & 0xFF;
register uint8_t r9 = (d >> 8) & 0xFF;
register uint8_t r10 = (d >> 16) & 0xFF;
register uint8_t r2,r3,r4,r5,r6,r7,r11,r12,r13,r14,r15,r16,r17,r18;
register const uint8_t* ptab = inv_tab;
__asm__ __volatile__(
/* %8:%7:%6 = interval*/
/* r31:r30: MUST be those registers, and they must point to the inv_tab */
" clr %13" "\n\t" /* %13 = 0 */
/* Now we must compute */
/* result = 0xFFFFFF / d */
/* %8:%7:%6 = interval*/
/* %16:%15:%14 = nr */
/* %13 = 0*/
/* A plain division of 24x24 bits should take 388 cycles to complete. We will */
/* use Newton-Raphson for the calculation, and will strive to get way less cycles*/
/* for the same result - Using C division, it takes 500cycles to complete .*/
" clr %3" "\n\t" /* idx = 0 */
" mov %14,%6" "\n\t"
" mov %15,%7" "\n\t"
" mov %16,%8" "\n\t" /* nr = interval */
" tst %16" "\n\t" /* nr & 0xFF0000 == 0 ? */
" brne 2f" "\n\t" /* No, skip this */
" mov %16,%15" "\n\t"
" mov %15,%14" "\n\t" /* nr <<= 8, %14 not needed */
" subi %3,-8" "\n\t" /* idx += 8 */
" tst %16" "\n\t" /* nr & 0xFF0000 == 0 ? */
" brne 2f" "\n\t" /* No, skip this */
" mov %16,%15" "\n\t" /* nr <<= 8, %14 not needed */
" clr %15" "\n\t" /* We clear %14 */
" subi %3,-8" "\n\t" /* idx += 8 */
/* here %16 != 0 and %16:%15 contains at least 9 MSBits, or both %16:%15 are 0 */
"2:" "\n\t"
" cpi %16,0x10" "\n\t" /* (nr & 0xf00000) == 0 ? */
" brcc 3f" "\n\t" /* No, skip this */
" swap %15" "\n\t" /* Swap nibbles */
" swap %16" "\n\t" /* Swap nibbles. Low nibble is 0 */
" mov %14, %15" "\n\t"
" andi %14,0x0f" "\n\t" /* Isolate low nibble */
" andi %15,0xf0" "\n\t" /* Keep proper nibble in %15 */
" or %16, %14" "\n\t" /* %16:%15 <<= 4 */
" subi %3,-4" "\n\t" /* idx += 4 */
"3:" "\n\t"
" cpi %16,0x40" "\n\t" /* (nr & 0xc00000) == 0 ? */
" brcc 4f" "\n\t" /* No, skip this*/
" add %15,%15" "\n\t"
" adc %16,%16" "\n\t"
" add %15,%15" "\n\t"
" adc %16,%16" "\n\t" /* %16:%15 <<= 2 */
" subi %3,-2" "\n\t" /* idx += 2 */
"4:" "\n\t"
" cpi %16,0x80" "\n\t" /* (nr & 0x800000) == 0 ? */
" brcc 5f" "\n\t" /* No, skip this */
" add %15,%15" "\n\t"
" adc %16,%16" "\n\t" /* %16:%15 <<= 1 */
" inc %3" "\n\t" /* idx += 1 */
/* Now %16:%15 contains its MSBit set to 1, or %16:%15 is == 0. We are now absolutely sure*/
/* we have at least 9 MSBits available to enter the initial estimation table*/
"5:" "\n\t"
" add %15,%15" "\n\t"
" adc %16,%16" "\n\t" /* %16:%15 = tidx = (nr <<= 1), we lose the top MSBit (always set to 1, %16 is the index into the inverse table)*/
" add r30,%16" "\n\t" /* Only use top 8 bits */
" adc r31,%13" "\n\t" /* r31:r30 = inv_tab + (tidx) */
" lpm %14, Z" "\n\t" /* %14 = inv_tab[tidx] */
" ldi %15, 1" "\n\t" /* %15 = 1 %15:%14 = inv_tab[tidx] + 256 */
/* We must scale the approximation to the proper place*/
" clr %16" "\n\t" /* %16 will always be 0 here */
" subi %3,8" "\n\t" /* idx == 8 ? */
" breq 6f" "\n\t" /* yes, no need to scale*/
" brcs 7f" "\n\t" /* If C=1, means idx < 8, result was negative!*/
/* idx > 8, now %3 = idx - 8. We must perform a left shift. idx range:[1-8]*/
" sbrs %3,0" "\n\t" /* shift by 1bit position?*/
" rjmp 8f" "\n\t" /* No*/
" add %14,%14" "\n\t"
" adc %15,%15" "\n\t" /* %15:16 <<= 1*/
"8:" "\n\t"
" sbrs %3,1" "\n\t" /* shift by 2bit position?*/
" rjmp 9f" "\n\t" /* No*/
" add %14,%14" "\n\t"
" adc %15,%15" "\n\t"
" add %14,%14" "\n\t"
" adc %15,%15" "\n\t" /* %15:16 <<= 1*/
"9:" "\n\t"
" sbrs %3,2" "\n\t" /* shift by 4bits position?*/
" rjmp 16f" "\n\t" /* No*/
" swap %15" "\n\t" /* Swap nibbles. lo nibble of %15 will always be 0*/
" swap %14" "\n\t" /* Swap nibbles*/
" mov %12,%14" "\n\t"
" andi %12,0x0f" "\n\t" /* isolate low nibble*/
" andi %14,0xf0" "\n\t" /* and clear it*/
" or %15,%12" "\n\t" /* %15:%16 <<= 4*/
"16:" "\n\t"
" sbrs %3,3" "\n\t" /* shift by 8bits position?*/
" rjmp 6f" "\n\t" /* No, we are done */
" mov %16,%15" "\n\t"
" mov %15,%14" "\n\t"
" clr %14" "\n\t"
" jmp 6f" "\n\t"
/* idx < 8, now %3 = idx - 8. Get the count of bits */
"7:" "\n\t"
" neg %3" "\n\t" /* %3 = -idx = count of bits to move right. idx range:[1...8]*/
" sbrs %3,0" "\n\t" /* shift by 1 bit position ?*/
" rjmp 10f" "\n\t" /* No, skip it*/
" asr %15" "\n\t" /* (bit7 is always 0 here)*/
" ror %14" "\n\t"
"10:" "\n\t"
" sbrs %3,1" "\n\t" /* shift by 2 bit position ?*/
" rjmp 11f" "\n\t" /* No, skip it*/
" asr %15" "\n\t" /* (bit7 is always 0 here)*/
" ror %14" "\n\t"
" asr %15" "\n\t" /* (bit7 is always 0 here)*/
" ror %14" "\n\t"
"11:" "\n\t"
" sbrs %3,2" "\n\t" /* shift by 4 bit position ?*/
" rjmp 12f" "\n\t" /* No, skip it*/
" swap %15" "\n\t" /* Swap nibbles*/
" andi %14, 0xf0" "\n\t" /* Lose the lowest nibble*/
" swap %14" "\n\t" /* Swap nibbles. Upper nibble is 0*/
" or %14,%15" "\n\t" /* Pass nibble from upper byte*/
" andi %15, 0x0f" "\n\t" /* And get rid of that nibble*/
"12:" "\n\t"
" sbrs %3,3" "\n\t" /* shift by 8 bit position ?*/
" rjmp 6f" "\n\t" /* No, skip it*/
" mov %14,%15" "\n\t"
" clr %15" "\n\t"
"6:" "\n\t" /* %16:%15:%14 = initial estimation of 0x1000000 / d*/
/* Now, we must refine the estimation present on %16:%15:%14 using 1 iteration*/
/* of Newton-Raphson. As it has a quadratic convergence, 1 iteration is enough*/
/* to get more than 18bits of precision (the initial table lookup gives 9 bits of*/
/* precision to start from). 18bits of precision is all what is needed here for result */
/* %8:%7:%6 = d = interval*/
/* %16:%15:%14 = x = initial estimation of 0x1000000 / d*/
/* %13 = 0*/
/* %3:%2:%1:%0 = working accumulator*/
/* Compute 1<<25 - x*d. Result should never exceed 25 bits and should always be positive*/
" clr %0" "\n\t"
" clr %1" "\n\t"
" clr %2" "\n\t"
" ldi %3,2" "\n\t" /* %3:%2:%1:%0 = 0x2000000*/
" mul %6,%14" "\n\t" /* r1:r0 = LO(d) * LO(x)*/
" sub %0,r0" "\n\t"
" sbc %1,r1" "\n\t"
" sbc %2,%13" "\n\t"
" sbc %3,%13" "\n\t" /* %3:%2:%1:%0 -= LO(d) * LO(x)*/
" mul %7,%14" "\n\t" /* r1:r0 = MI(d) * LO(x)*/
" sub %1,r0" "\n\t"
" sbc %2,r1" "\n\t"
" sbc %3,%13" "\n\t" /* %3:%2:%1:%0 -= MI(d) * LO(x) << 8*/
" mul %8,%14" "\n\t" /* r1:r0 = HI(d) * LO(x)*/
" sub %2,r0" "\n\t"
" sbc %3,r1" "\n\t" /* %3:%2:%1:%0 -= MIL(d) * LO(x) << 16*/
" mul %6,%15" "\n\t" /* r1:r0 = LO(d) * MI(x)*/
" sub %1,r0" "\n\t"
" sbc %2,r1" "\n\t"
" sbc %3,%13" "\n\t" /* %3:%2:%1:%0 -= LO(d) * MI(x) << 8*/
" mul %7,%15" "\n\t" /* r1:r0 = MI(d) * MI(x)*/
" sub %2,r0" "\n\t"
" sbc %3,r1" "\n\t" /* %3:%2:%1:%0 -= MI(d) * MI(x) << 16*/
" mul %8,%15" "\n\t" /* r1:r0 = HI(d) * MI(x)*/
" sub %3,r0" "\n\t" /* %3:%2:%1:%0 -= MIL(d) * MI(x) << 24*/
" mul %6,%16" "\n\t" /* r1:r0 = LO(d) * HI(x)*/
" sub %2,r0" "\n\t"
" sbc %3,r1" "\n\t" /* %3:%2:%1:%0 -= LO(d) * HI(x) << 16*/
" mul %7,%16" "\n\t" /* r1:r0 = MI(d) * HI(x)*/
" sub %3,r0" "\n\t" /* %3:%2:%1:%0 -= MI(d) * HI(x) << 24*/
/* %3:%2:%1:%0 = (1<<25) - x*d [169]*/
/* We need to multiply that result by x, and we are only interested in the top 24bits of that multiply*/
/* %16:%15:%14 = x = initial estimation of 0x1000000 / d*/
/* %3:%2:%1:%0 = (1<<25) - x*d = acc*/
/* %13 = 0 */
/* result = %11:%10:%9:%5:%4*/
" mul %14,%0" "\n\t" /* r1:r0 = LO(x) * LO(acc)*/
" mov %4,r1" "\n\t"
" clr %5" "\n\t"
" clr %9" "\n\t"
" clr %10" "\n\t"
" clr %11" "\n\t" /* %11:%10:%9:%5:%4 = LO(x) * LO(acc) >> 8*/
" mul %15,%0" "\n\t" /* r1:r0 = MI(x) * LO(acc)*/
" add %4,r0" "\n\t"
" adc %5,r1" "\n\t"
" adc %9,%13" "\n\t"
" adc %10,%13" "\n\t"
" adc %11,%13" "\n\t" /* %11:%10:%9:%5:%4 += MI(x) * LO(acc) */
" mul %16,%0" "\n\t" /* r1:r0 = HI(x) * LO(acc)*/
" add %5,r0" "\n\t"
" adc %9,r1" "\n\t"
" adc %10,%13" "\n\t"
" adc %11,%13" "\n\t" /* %11:%10:%9:%5:%4 += MI(x) * LO(acc) << 8*/
" mul %14,%1" "\n\t" /* r1:r0 = LO(x) * MIL(acc)*/
" add %4,r0" "\n\t"
" adc %5,r1" "\n\t"
" adc %9,%13" "\n\t"
" adc %10,%13" "\n\t"
" adc %11,%13" "\n\t" /* %11:%10:%9:%5:%4 = LO(x) * MIL(acc)*/
" mul %15,%1" "\n\t" /* r1:r0 = MI(x) * MIL(acc)*/
" add %5,r0" "\n\t"
" adc %9,r1" "\n\t"
" adc %10,%13" "\n\t"
" adc %11,%13" "\n\t" /* %11:%10:%9:%5:%4 += MI(x) * MIL(acc) << 8*/
" mul %16,%1" "\n\t" /* r1:r0 = HI(x) * MIL(acc)*/
" add %9,r0" "\n\t"
" adc %10,r1" "\n\t"
" adc %11,%13" "\n\t" /* %11:%10:%9:%5:%4 += MI(x) * MIL(acc) << 16*/
" mul %14,%2" "\n\t" /* r1:r0 = LO(x) * MIH(acc)*/
" add %5,r0" "\n\t"
" adc %9,r1" "\n\t"
" adc %10,%13" "\n\t"
" adc %11,%13" "\n\t" /* %11:%10:%9:%5:%4 = LO(x) * MIH(acc) << 8*/
" mul %15,%2" "\n\t" /* r1:r0 = MI(x) * MIH(acc)*/
" add %9,r0" "\n\t"
" adc %10,r1" "\n\t"
" adc %11,%13" "\n\t" /* %11:%10:%9:%5:%4 += MI(x) * MIH(acc) << 16*/
" mul %16,%2" "\n\t" /* r1:r0 = HI(x) * MIH(acc)*/
" add %10,r0" "\n\t"
" adc %11,r1" "\n\t" /* %11:%10:%9:%5:%4 += MI(x) * MIH(acc) << 24*/
" mul %14,%3" "\n\t" /* r1:r0 = LO(x) * HI(acc)*/
" add %9,r0" "\n\t"
" adc %10,r1" "\n\t"
" adc %11,%13" "\n\t" /* %11:%10:%9:%5:%4 = LO(x) * HI(acc) << 16*/
" mul %15,%3" "\n\t" /* r1:r0 = MI(x) * HI(acc)*/
" add %10,r0" "\n\t"
" adc %11,r1" "\n\t" /* %11:%10:%9:%5:%4 += MI(x) * HI(acc) << 24*/
" mul %16,%3" "\n\t" /* r1:r0 = HI(x) * HI(acc)*/
" add %11,r0" "\n\t" /* %11:%10:%9:%5:%4 += MI(x) * HI(acc) << 32*/
/* At this point, %11:%10:%9 contains the new estimation of x. */
/* Finally, we must correct the result. Estimate remainder as*/
/* (1<<24) - x*d*/
/* %11:%10:%9 = x*/
/* %8:%7:%6 = d = interval" "\n\t" /* */
" ldi %3,1" "\n\t"
" clr %2" "\n\t"
" clr %1" "\n\t"
" clr %0" "\n\t" /* %3:%2:%1:%0 = 0x1000000*/
" mul %6,%9" "\n\t" /* r1:r0 = LO(d) * LO(x)*/
" sub %0,r0" "\n\t"
" sbc %1,r1" "\n\t"
" sbc %2,%13" "\n\t"
" sbc %3,%13" "\n\t" /* %3:%2:%1:%0 -= LO(d) * LO(x)*/
" mul %7,%9" "\n\t" /* r1:r0 = MI(d) * LO(x)*/
" sub %1,r0" "\n\t"
" sbc %2,r1" "\n\t"
" sbc %3,%13" "\n\t" /* %3:%2:%1:%0 -= MI(d) * LO(x) << 8*/
" mul %8,%9" "\n\t" /* r1:r0 = HI(d) * LO(x)*/
" sub %2,r0" "\n\t"
" sbc %3,r1" "\n\t" /* %3:%2:%1:%0 -= MIL(d) * LO(x) << 16*/
" mul %6,%10" "\n\t" /* r1:r0 = LO(d) * MI(x)*/
" sub %1,r0" "\n\t"
" sbc %2,r1" "\n\t"
" sbc %3,%13" "\n\t" /* %3:%2:%1:%0 -= LO(d) * MI(x) << 8*/
" mul %7,%10" "\n\t" /* r1:r0 = MI(d) * MI(x)*/
" sub %2,r0" "\n\t"
" sbc %3,r1" "\n\t" /* %3:%2:%1:%0 -= MI(d) * MI(x) << 16*/
" mul %8,%10" "\n\t" /* r1:r0 = HI(d) * MI(x)*/
" sub %3,r0" "\n\t" /* %3:%2:%1:%0 -= MIL(d) * MI(x) << 24*/
" mul %6,%11" "\n\t" /* r1:r0 = LO(d) * HI(x)*/
" sub %2,r0" "\n\t"
" sbc %3,r1" "\n\t" /* %3:%2:%1:%0 -= LO(d) * HI(x) << 16*/
" mul %7,%11" "\n\t" /* r1:r0 = MI(d) * HI(x)*/
" sub %3,r0" "\n\t" /* %3:%2:%1:%0 -= MI(d) * HI(x) << 24*/
/* %3:%2:%1:%0 = r = (1<<24) - x*d*/
/* %8:%7:%6 = d = interval */
/* Perform the final correction*/
" sub %0,%6" "\n\t"
" sbc %1,%7" "\n\t"
" sbc %2,%8" "\n\t" /* r -= d*/
" brcs 14f" "\n\t" /* if ( r >= d) */
/* %11:%10:%9 = x */
" ldi %3,1" "\n\t"
" add %9,%3" "\n\t"
" adc %10,%13" "\n\t"
" adc %11,%13" "\n\t" /* x++*/
"14:" "\n\t"
/* Estimation is done. %11:%10:%9 = x */
" clr __zero_reg__" "\n\t" /* Make C runtime happy */
/* [211 cycles total]*/
: "=r" (r2),
"=r" (r3),
"=r" (r4),
"=d" (r5),
"=r" (r6),
"=r" (r7),
"+r" (r8),
"+r" (r9),
"+r" (r10),
"=d" (r11),
"=r" (r12),
"=r" (r13),
"=d" (r14),
"=d" (r15),
"=d" (r16),
"=d" (r17),
"=d" (r18),
"+z" (ptab)
:
: "r0", "r1", "cc"
);
// Return the result
return r11 | (uint16_t(r12) << 8) | (uint32_t(r13) << 16);
}
#else
// All the other 32 CPUs can easily perform the inverse using hardware division,
// so we don´t need to reduce precision or to use assembly language at all.
// This routine, for all the other archs, returns 0x100000000 / d ~= 0xFFFFFFFF / d
static FORCE_INLINE uint32_t get_period_inverse(uint32_t d) {
return 0xFFFFFFFF / d;
}
#endif
#endif
#define MINIMAL_STEP_RATE 120
/**
@ -266,8 +787,13 @@ void Planner::calculate_trapezoid_for_block(block_t* const block, const float &e
#if ENABLED(BEZIER_JERK_CONTROL)
// Jerk controlled speed requires to express speed versus time, NOT steps
int32_t acceleration_time = ((float)(cruise_rate - initial_rate) / accel) * HAL_STEPPER_TIMER_RATE,
uint32_t acceleration_time = ((float)(cruise_rate - initial_rate) / accel) * HAL_STEPPER_TIMER_RATE,
deceleration_time = ((float)(cruise_rate - final_rate) / accel) * HAL_STEPPER_TIMER_RATE;
// And to offload calculations from the ISR, we also calculate the inverse of those times here
uint32_t acceleration_time_inverse = get_period_inverse(acceleration_time);
uint32_t deceleration_time_inverse = get_period_inverse(deceleration_time);
#endif
CRITICAL_SECTION_START; // Fill variables used by the stepper in a critical section
@ -278,6 +804,8 @@ void Planner::calculate_trapezoid_for_block(block_t* const block, const float &e
#if ENABLED(BEZIER_JERK_CONTROL)
block->acceleration_time = acceleration_time;
block->deceleration_time = deceleration_time;
block->acceleration_time_inverse = acceleration_time_inverse;
block->deceleration_time_inverse = deceleration_time_inverse;
block->cruise_rate = cruise_rate;
#endif
block->final_rate = final_rate;

4
Marlin/src/module/planner.h
View File

@ -96,8 +96,10 @@ typedef struct {
#if ENABLED(BEZIER_JERK_CONTROL)
uint32_t cruise_rate; // The actual cruise rate to use, between end of the acceleration phase and start of deceleration phase
int32_t acceleration_time, // Acceleration time and deceleration time in STEP timer counts
uint32_t acceleration_time, // Acceleration time and deceleration time in STEP timer counts
deceleration_time;
uint32_t acceleration_time_inverse, // Inverse of acceleration and deceleration periods, expressed as integer. Scale depends on CPU being used
deceleration_time_inverse;
#else
int32_t acceleration_rate; // The acceleration rate used for acceleration calculation
#endif

702
Marlin/src/module/stepper.cpp
View File

@ -117,11 +117,14 @@ long Stepper::counter_X = 0,
volatile uint32_t Stepper::step_events_completed = 0; // The number of step events executed in the current block
#if ENABLED(BEZIER_JERK_CONTROL)
int32_t Stepper::bezier_A, // A coefficient in Bézier speed curve
Stepper::bezier_B, // B coefficient in Bézier speed curve
Stepper::bezier_C, // C coefficient in Bézier speed curve
Stepper::bezier_F; // F coefficient in Bézier speed curve
uint32_t Stepper::bezier_AV; // AV coefficient in Bézier speed curve
int32_t __attribute__((used)) Stepper::bezier_A __asm__("bezier_A"); // A coefficient in Bézier speed curve with alias for assembler
int32_t __attribute__((used)) Stepper::bezier_B __asm__("bezier_B"); // B coefficient in Bézier speed curve with alias for assembler
int32_t __attribute__((used)) Stepper::bezier_C __asm__("bezier_C"); // C coefficient in Bézier speed curve with alias for assembler
uint32_t __attribute__((used)) Stepper::bezier_F __asm__("bezier_F"); // F coefficient in Bézier speed curve with alias for assembler
uint32_t __attribute__((used)) Stepper::bezier_AV __asm__("bezier_AV"); // AV coefficient in Bézier speed curve with alias for assembler
#ifdef __AVR__
bool __attribute__((used)) Stepper::A_negative __asm__("A_negative"); // If A coefficient was negative
#endif
bool Stepper::bezier_2nd_half; // =false If Bézier curve has been initialized or not
#endif
@ -391,68 +394,673 @@ void Stepper::set_directions() {
*
* Note the abbreviations we use in the following formulae are between []s
*
* For Any 32bit CPU:
*
* At the start of each trapezoid, we calculate the coefficients A,B,C,F and Advance [AV], as follows:
*
* A = 6*128*(VF - VI) = 768*(VF - VI)
* B = 15*128*(VI - VF) = 1920*(VI - VF)
* C = 10*128*(VF - VI) = 1280*(VF - VI)
* F = 128*VI = 128*VI
* AV = (1<<32)/TS ~= 0xFFFFFFFF / TS (To use ARM UDIV, that is 32 bits)
* AV = (1<<32)/TS ~= 0xFFFFFFFF / TS (To use ARM UDIV, that is 32 bits) (this is computed at the planner, to offload expensive calculations from the ISR)
*
* And for each point, we will evaluate the curve with the following sequence:
*
* void lsrs(uint32_t& d, uint32_t s, int cnt) {
* d = s >> cnt;
* }
* void lsls(uint32_t& d, uint32_t s, int cnt) {
* d = s << cnt;
* }
* void lsrs(int32_t& d, uint32_t s, int cnt) {
* d = uint32_t(s) >> cnt;
* }
* void lsls(int32_t& d, uint32_t s, int cnt) {
* d = uint32_t(s) << cnt;
* }
* void umull(uint32_t& rlo, uint32_t& rhi, uint32_t op1, uint32_t op2) {
* uint64_t res = uint64_t(op1) * op2;
* rlo = uint32_t(res & 0xFFFFFFFF);
* rhi = uint32_t((res >> 32) & 0xFFFFFFFF);
* }
* void smlal(int32_t& rlo, int32_t& rhi, int32_t op1, int32_t op2) {
* int64_t mul = int64_t(op1) * op2;
* int64_t s = int64_t(uint32_t(rlo) | ((uint64_t(uint32_t(rhi)) << 32U)));
* mul += s;
* rlo = int32_t(mul & 0xFFFFFFFF);
* rhi = int32_t((mul >> 32) & 0xFFFFFFFF);
* }
* int32_t _eval_bezier_curve_arm(uint32_t curr_step) {
* register uint32_t flo = 0;
* register uint32_t fhi = bezier_AV * curr_step;
* register uint32_t t = fhi;
* register int32_t alo = bezier_F;
* register int32_t ahi = 0;
* register int32_t A = bezier_A;
* register int32_t B = bezier_B;
* register int32_t C = bezier_C;
*
* lsrs(ahi, alo, 1); // a = F << 31
* lsls(alo, alo, 31); //
* umull(flo, fhi, fhi, t); // f *= t
* umull(flo, fhi, fhi, t); // f>>=32; f*=t
* lsrs(flo, fhi, 1); //
* smlal(alo, ahi, flo, C); // a+=(f>>33)*C
* umull(flo, fhi, fhi, t); // f>>=32; f*=t
* lsrs(flo, fhi, 1); //
* smlal(alo, ahi, flo, B); // a+=(f>>33)*B
* umull(flo, fhi, fhi, t); // f>>=32; f*=t
* lsrs(flo, fhi, 1); // f>>=33;
* smlal(alo, ahi, flo, A); // a+=(f>>33)*A;
* lsrs(alo, ahi, 6); // a>>=38
*
* return alo;
* }
*
* This will be rewritten in ARM assembly to get peak performance and will take 43 cycles to execute
*
* For AVR, we scale precision of coefficients to make it possible to evaluate the Bézier curve in
* realtime: Let's reduce precision as much as possible. After some experimentation we found that:
*
* Assume t and AV with 24 bits is enough
* A = 6*(VF - VI)
* B = 15*(VI - VF)
* C = 10*(VF - VI)
* F = VI
* AV = (1<<24)/TS (this is computed at the planner, to offload expensive calculations from the ISR)
*
* Instead of storing sign for each coefficient, we will store its absolute value,
* and flag the sign of the A coefficient, so we can save to store the sign bit.
* It always holds that sign(A) = - sign(B) = sign(C)
*
* So, the resulting range of the coefficients are:
*
* t: unsigned (0 <= t < 1) |range 0 to 0xFFFFFF unsigned
* A: signed Q24 , range = 250000 * 6 = 1500000 = 0x16E360 | 21 bits
* B: signed Q24 , range = 250000 *15 = 3750000 = 0x393870 | 22 bits
* C: signed Q24 , range = 250000 *10 = 2500000 = 0x1312D0 | 21 bits
* F: signed Q24 , range = 250000 = 250000 = 0x0ED090 | 20 bits
*
* And for each curve, we estimate its coefficients with:
*
* void _calc_bezier_curve_coeffs(int32_t v0, int32_t v1, uint32_t av) {
* // Calculate the Bézier coefficients
* if (v1 < v0) {
* A_negative = true;
* bezier_A = 6 * (v0 - v1);
* bezier_B = 15 * (v0 - v1);
* bezier_C = 10 * (v0 - v1);
* }
* else {
* A_negative = false;
* bezier_A = 6 * (v1 - v0);
* bezier_B = 15 * (v1 - v0);
* bezier_C = 10 * (v1 - v0);
* }
* bezier_F = v0;
* }
*
* And for each point, we will evaluate the curve with the following sequence:
*
* uint32_t t = bezier_AV * curr_step; // t: Range 0 - 1^32 = 32 bits
* uint64_t f = t;
* f *= t; // Range 32*2 = 64 bits (unsigned)
* f >>= 32; // Range 32 bits (unsigned)
* f *= t; // Range 32*2 = 64 bits (unsigned)
* f >>= 32; // Range 32 bits : f = t^3 (unsigned)
* int64_t acc = (int64_t) bezier_F << 31; // Range 63 bits (signed)
* acc += ((uint32_t) f >> 1) * (int64_t) bezier_C; // Range 29bits + 31 = 60bits (plus sign)
* f *= t; // Range 32*2 = 64 bits
* f >>= 32; // Range 32 bits : f = t^3 (unsigned)
* acc += ((uint32_t) f >> 1) * (int64_t) bezier_B; // Range 29bits + 31 = 60bits (plus sign)
* f *= t; // Range 32*2 = 64 bits
* f >>= 32; // Range 32 bits : f = t^3 (unsigned)
* acc += ((uint32_t) f >> 1) * (int64_t) bezier_A; // Range 28bits + 31 = 59bits (plus sign)
* acc >>= (31 + 7); // Range 24bits (plus sign)
* // unsigned multiplication of 24 bits x 24bits, return upper 16 bits
* void umul24x24to16hi(uint16_t& r, uint24_t op1, uint24_t op2) {
* r = (uint64_t(op1) * op2) >> 8;
* }
* // unsigned multiplication of 16 bits x 16bits, return upper 16 bits
* void umul16x16to16hi(uint16_t& r, uint16_t op1, uint16_t op2) {
* r = (uint32_t(op1) * op2) >> 16;
* }
* // unsigned multiplication of 16 bits x 24bits, return upper 24 bits
* void umul16x24to24hi(uint24_t& r, uint16_t op1, uint24_t op2) {
* r = uint24_t((uint64_t(op1) * op2) >> 16);
* }
*
* This can be translated to the following ARM assembly sequence:
* int32_t _eval_bezier_curve(uint32_t curr_step) {
* // To save computing, the first step is always the initial speed
* if (!curr_step)
* return bezier_F;
*
* At start:
* fhi = AV, flo = CS, alo = F
* uint16_t t;
* umul24x24to16hi(t, bezier_AV, curr_step); // t: Range 0 - 1^16 = 16 bits
* uint16_t f = t;
* umul16x16to16hi(f, f, t); // Range 16 bits (unsigned)
* umul16x16to16hi(f, f, t); // Range 16 bits : f = t^3 (unsigned)
* uint24_t acc = bezier_F; // Range 20 bits (unsigned)
* if (A_negative) {
* uint24_t v;
* umul16x24to24hi(v, f, bezier_C); // Range 21bits
* acc -= v;
* umul16x16to16hi(f, f, t); // Range 16 bits : f = t^4 (unsigned)
* umul16x24to24hi(v, f, bezier_B); // Range 22bits
* acc += v;
* umul16x16to16hi(f, f, t); // Range 16 bits : f = t^5 (unsigned)
* umul16x24to24hi(v, f, bezier_A); // Range 21bits + 15 = 36bits (plus sign)
* acc -= v;
* }
* else {
* uint24_t v;
* umul16x24to24hi(v, f, bezier_C); // Range 21bits
* acc += v;
* umul16x16to16hi(f, f, t); // Range 16 bits : f = t^4 (unsigned)
* umul16x24to24hi(v, f, bezier_B); // Range 22bits
* acc -= v;
* umul16x16to16hi(f, f, t); // Range 16 bits : f = t^5 (unsigned)
* umul16x24to24hi(v, f, bezier_A); // Range 21bits + 15 = 36bits (plus sign)
* acc += v;
* }
* return acc;
* }
* Those functions will be translated into assembler to get peak performance. coefficient calculations takes 70 cycles,
* Bezier point evaluation takes 150 cycles
*
* muls fhi,flo | f = AV * CS 1 cycles
* mov t,fhi | t = AV * CS 1 cycles
* lsrs ahi,alo,#1 | a = F << 31 1 cycles
* lsls alo,alo,#31 | 1 cycles
* umull flo,fhi,fhi,t | f *= t 5 cycles [fhi:flo=64bits
* umull flo,fhi,fhi,t | f>>=32; f*=t 5 cycles [fhi:flo=64bits
* lsrs flo,fhi,#1 | 1 cycles [31bits
* smlal alo,ahi,flo,C | a+=(f>>33)*C; 5 cycles
* umull flo,fhi,fhi,t | f>>=32; f*=t 5 cycles [fhi:flo=64bits
* lsrs flo,fhi,#1 | 1 cycles [31bits
* smlal alo,ahi,flo,B | a+=(f>>33)*B; 5 cycles
* umull flo,fhi,fhi,t | f>>=32; f*=t 5 cycles [fhi:flo=64bits
* lsrs flo,fhi,#1 | f>>=33; 1 cycles [31bits
* smlal alo,ahi,flo,A | a+=(f>>33)*A; 5 cycles
* lsrs alo,ahi,#6 | a>>=38 1 cycles
* 43 cycles total
*/
FORCE_INLINE void Stepper::_calc_bezier_curve_coeffs(const int32_t v0, const int32_t v1, const uint32_t interval) {
#ifdef __AVR__
// For AVR we use assembly to maximize speed
void Stepper::_calc_bezier_curve_coeffs(const int32_t v0, const int32_t v1, const uint32_t av) {
// Store advance
bezier_AV = av;
// Calculate the rest of the coefficients
register uint8_t r2 = v0 & 0xFF;
register uint8_t r3 = (v0 >> 8) & 0xFF;
register uint8_t r12 = (v0 >> 16) & 0xFF;
register uint8_t r5 = v1 & 0xFF;
register uint8_t r6 = (v1 >> 8) & 0xFF;
register uint8_t r7 = (v1 >> 16) & 0xFF;
register uint8_t r4,r8,r9,r10,r11;
__asm__ __volatile__(
/* Calculate the Bézier coefficients */
/* %10:%1:%0 = v0*/
/* %5:%4:%3 = v1*/
/* %7:%6:%10 = temporary*/
/* %9 = val (must be high register!)*/
/* %10 (must be high register!)*/
/* Store initial velocity*/
" sts bezier_F, %0" "\n\t"
" sts bezier_F+1, %1" "\n\t"
" sts bezier_F+2, %10" "\n\t" /* bezier_F = %10:%1:%0 = v0 */
/* Get delta speed */
" ldi %2,-1" "\n\t" /* %2 = 0xff, means A_negative = true */
" clr %8" "\n\t" /* %8 = 0 */
" sub %0,%3" "\n\t"
" sbc %1,%4" "\n\t"
" sbc %10,%5" "\n\t" /* v0 -= v1, C=1 if result is negative */
" brcc 1f" "\n\t" /* branch if result is positive (C=0), that means v0 >= v1 */
/* Result was negative, get the absolute value*/
" com %10" "\n\t"
" com %1" "\n\t"
" neg %0" "\n\t"
" sbc %1,%2" "\n\t"
" sbc %10,%2" "\n\t" /* %10:%1:%0 +1 -> %10:%1:%0 = -(v0 - v1) = (v1 - v0) */
" clr %2" "\n\t" /* %2 = 0, means A_negative = false */
/* Store negative flag*/
"1:" "\n\t"
" sts A_negative, %2" "\n\t" /* Store negative flag */
/* Compute coefficients A,B and C [20 cycles worst case]*/
" ldi %9,6" "\n\t" /* %9 = 6 */
" mul %0,%9" "\n\t" /* r1:r0 = 6*LO(v0-v1) */
" sts bezier_A, r0" "\n\t"
" mov %6,r1" "\n\t"
" clr %7" "\n\t" /* %7:%6:r0 = 6*LO(v0-v1) */
" mul %1,%9" "\n\t" /* r1:r0 = 6*MI(v0-v1) */
" add %6,r0" "\n\t"
" adc %7,r1" "\n\t" /* %7:%6:?? += 6*MI(v0-v1) << 8 */
" mul %10,%9" "\n\t" /* r1:r0 = 6*HI(v0-v1) */
" add %7,r0" "\n\t" /* %7:%6:?? += 6*HI(v0-v1) << 16 */
" sts bezier_A+1, %6" "\n\t"
" sts bezier_A+2, %7" "\n\t" /* bezier_A = %7:%6:?? = 6*(v0-v1) [35 cycles worst] */
" ldi %9,15" "\n\t" /* %9 = 15 */
" mul %0,%9" "\n\t" /* r1:r0 = 5*LO(v0-v1) */
" sts bezier_B, r0" "\n\t"
" mov %6,r1" "\n\t"
" clr %7" "\n\t" /* %7:%6:?? = 5*LO(v0-v1) */
" mul %1,%9" "\n\t" /* r1:r0 = 5*MI(v0-v1) */
" add %6,r0" "\n\t"
" adc %7,r1" "\n\t" /* %7:%6:?? += 5*MI(v0-v1) << 8 */
" mul %10,%9" "\n\t" /* r1:r0 = 5*HI(v0-v1) */
" add %7,r0" "\n\t" /* %7:%6:?? += 5*HI(v0-v1) << 16 */
" sts bezier_B+1, %6" "\n\t"
" sts bezier_B+2, %7" "\n\t" /* bezier_B = %7:%6:?? = 5*(v0-v1) [50 cycles worst] */
" ldi %9,10" "\n\t" /* %9 = 10 */
" mul %0,%9" "\n\t" /* r1:r0 = 10*LO(v0-v1) */
" sts bezier_C, r0" "\n\t"
" mov %6,r1" "\n\t"
" clr %7" "\n\t" /* %7:%6:?? = 10*LO(v0-v1) */
" mul %1,%9" "\n\t" /* r1:r0 = 10*MI(v0-v1) */
" add %6,r0" "\n\t"
" adc %7,r1" "\n\t" /* %7:%6:?? += 10*MI(v0-v1) << 8 */
" mul %10,%9" "\n\t" /* r1:r0 = 10*HI(v0-v1) */
" add %7,r0" "\n\t" /* %7:%6:?? += 10*HI(v0-v1) << 16 */
" sts bezier_C+1, %6" "\n\t"
" sts bezier_C+2, %7" /* bezier_C = %7:%6:?? = 10*(v0-v1) [65 cycles worst] */
: "+r" (r2),
"+d" (r3),
"=r" (r4),
"+r" (r5),
"+r" (r6),
"+r" (r7),
"=r" (r8),
"=r" (r9),
"=r" (r10),
"=d" (r11),
"+r" (r12)
:
: "r0", "r1", "cc", "memory"
);
}
FORCE_INLINE int32_t Stepper::_eval_bezier_curve(const uint32_t curr_step) {
// If dealing with the first step, save expensive computing and return the initial speed
if (!curr_step)
return bezier_F;
register uint8_t r0 = 0; /* Zero register */
register uint8_t r2 = (curr_step) & 0xFF;
register uint8_t r3 = (curr_step >> 8) & 0xFF;
register uint8_t r4 = (curr_step >> 16) & 0xFF;
register uint8_t r1,r5,r6,r7,r8,r9,r10,r11; /* Temporary registers */
__asm__ __volatile(
/* umul24x24to16hi(t, bezier_AV, curr_step); t: Range 0 - 1^16 = 16 bits*/
" lds %9,bezier_AV" "\n\t" /* %9 = LO(AV)*/
" mul %9,%2" "\n\t" /* r1:r0 = LO(bezier_AV)*LO(curr_step)*/
" mov %7,r1" "\n\t" /* %7 = LO(bezier_AV)*LO(curr_step) >> 8*/
" clr %8" "\n\t" /* %8:%7 = LO(bezier_AV)*LO(curr_step) >> 8*/
" lds %10,bezier_AV+1" "\n\t" /* %10 = MI(AV)*/
" mul %10,%2" "\n\t" /* r1:r0 = MI(bezier_AV)*LO(curr_step)*/
" add %7,r0" "\n\t"
" adc %8,r1" "\n\t" /* %8:%7 += MI(bezier_AV)*LO(curr_step)*/
" lds r1,bezier_AV+2" "\n\t" /* r11 = HI(AV)*/
" mul r1,%2" "\n\t" /* r1:r0 = HI(bezier_AV)*LO(curr_step)*/
" add %8,r0" "\n\t" /* %8:%7 += HI(bezier_AV)*LO(curr_step) << 8*/
" mul %9,%3" "\n\t" /* r1:r0 = LO(bezier_AV)*MI(curr_step)*/
" add %7,r0" "\n\t"
" adc %8,r1" "\n\t" /* %8:%7 += LO(bezier_AV)*MI(curr_step)*/
" mul %10,%3" "\n\t" /* r1:r0 = MI(bezier_AV)*MI(curr_step)*/
" add %8,r0" "\n\t" /* %8:%7 += LO(bezier_AV)*MI(curr_step) << 8*/
" mul %9,%4" "\n\t" /* r1:r0 = LO(bezier_AV)*HI(curr_step)*/
" add %8,r0" "\n\t" /* %8:%7 += LO(bezier_AV)*HI(curr_step) << 8*/
/* %8:%7 = t*/
/* uint16_t f = t;*/
" mov %5,%7" "\n\t" /* %6:%5 = f*/
" mov %6,%8" "\n\t"
/* %6:%5 = f*/
/* umul16x16to16hi(f, f, t); / Range 16 bits (unsigned) [17] */
" mul %5,%7" "\n\t" /* r1:r0 = LO(f) * LO(t)*/
" mov %9,r1" "\n\t" /* store MIL(LO(f) * LO(t)) in %9, we need it for rounding*/
" clr %10" "\n\t" /* %10 = 0*/
" clr %11" "\n\t" /* %11 = 0*/
" mul %5,%8" "\n\t" /* r1:r0 = LO(f) * HI(t)*/
" add %9,r0" "\n\t" /* %9 += LO(LO(f) * HI(t))*/
" adc %10,r1" "\n\t" /* %10 = HI(LO(f) * HI(t))*/
" adc %11,%0" "\n\t" /* %11 += carry*/
" mul %6,%7" "\n\t" /* r1:r0 = HI(f) * LO(t)*/
" add %9,r0" "\n\t" /* %9 += LO(HI(f) * LO(t))*/
" adc %10,r1" "\n\t" /* %10 += HI(HI(f) * LO(t)) */
" adc %11,%0" "\n\t" /* %11 += carry*/
" mul %6,%8" "\n\t" /* r1:r0 = HI(f) * HI(t)*/
" add %10,r0" "\n\t" /* %10 += LO(HI(f) * HI(t))*/
" adc %11,r1" "\n\t" /* %11 += HI(HI(f) * HI(t))*/
" mov %5,%10" "\n\t" /* %6:%5 = */
" mov %6,%11" "\n\t" /* f = %10:%11*/
/* umul16x16to16hi(f, f, t); / Range 16 bits : f = t^3 (unsigned) [17]*/
" mul %5,%7" "\n\t" /* r1:r0 = LO(f) * LO(t)*/
" mov %1,r1" "\n\t" /* store MIL(LO(f) * LO(t)) in %1, we need it for rounding*/
" clr %10" "\n\t" /* %10 = 0*/
" clr %11" "\n\t" /* %11 = 0*/
" mul %5,%8" "\n\t" /* r1:r0 = LO(f) * HI(t)*/
" add %1,r0" "\n\t" /* %1 += LO(LO(f) * HI(t))*/
" adc %10,r1" "\n\t" /* %10 = HI(LO(f) * HI(t))*/
" adc %11,%0" "\n\t" /* %11 += carry*/
" mul %6,%7" "\n\t" /* r1:r0 = HI(f) * LO(t)*/
" add %1,r0" "\n\t" /* %1 += LO(HI(f) * LO(t))*/
" adc %10,r1" "\n\t" /* %10 += HI(HI(f) * LO(t))*/
" adc %11,%0" "\n\t" /* %11 += carry*/
" mul %6,%8" "\n\t" /* r1:r0 = HI(f) * HI(t)*/
" add %10,r0" "\n\t" /* %10 += LO(HI(f) * HI(t))*/
" adc %11,r1" "\n\t" /* %11 += HI(HI(f) * HI(t))*/
" mov %5,%10" "\n\t" /* %6:%5 =*/
" mov %6,%11" "\n\t" /* f = %10:%11*/
/* [15 +17*2] = [49]*/
/* %4:%3:%2 will be acc from now on*/
/* uint24_t acc = bezier_F; / Range 20 bits (unsigned)*/
" clr %9" "\n\t" /* "decimal place we get for free"*/
" lds %2,bezier_F" "\n\t"
" lds %3,bezier_F+1" "\n\t"
" lds %4,bezier_F+2" "\n\t" /* %4:%3:%2 = acc*/
/* if (A_negative) {*/
" lds r0,A_negative" "\n\t"
" or r0,%0" "\n\t" /* Is flag signalling negative? */
" brne 3f" "\n\t" /* If yes, Skip next instruction if A was negative*/
" rjmp 1f" "\n\t" /* Otherwise, jump */
/* uint24_t v; */
/* umul16x24to24hi(v, f, bezier_C); / Range 21bits [29] */
/* acc -= v; */
"3:" "\n\t"
" lds %10, bezier_C" "\n\t" /* %10 = LO(bezier_C)*/
" mul %10,%5" "\n\t" /* r1:r0 = LO(bezier_C) * LO(f)*/
" sub %9,r1" "\n\t"
" sbc %2,%0" "\n\t"
" sbc %3,%0" "\n\t"
" sbc %4,%0" "\n\t" /* %4:%3:%2:%9 -= HI(LO(bezier_C) * LO(f))*/
" lds %11, bezier_C+1" "\n\t" /* %11 = MI(bezier_C)*/
" mul %11,%5" "\n\t" /* r1:r0 = MI(bezier_C) * LO(f)*/
" sub %9,r0" "\n\t"
" sbc %2,r1" "\n\t"
" sbc %3,%0" "\n\t"
" sbc %4,%0" "\n\t" /* %4:%3:%2:%9 -= MI(bezier_C) * LO(f)*/
" lds %1, bezier_C+2" "\n\t" /* %1 = HI(bezier_C)*/
" mul %1,%5" "\n\t" /* r1:r0 = MI(bezier_C) * LO(f)*/
" sub %2,r0" "\n\t"
" sbc %3,r1" "\n\t"
" sbc %4,%0" "\n\t" /* %4:%3:%2:%9 -= HI(bezier_C) * LO(f) << 8*/
" mul %10,%6" "\n\t" /* r1:r0 = LO(bezier_C) * MI(f)*/
" sub %9,r0" "\n\t"
" sbc %2,r1" "\n\t"
" sbc %3,%0" "\n\t"
" sbc %4,%0" "\n\t" /* %4:%3:%2:%9 -= LO(bezier_C) * MI(f)*/
" mul %11,%6" "\n\t" /* r1:r0 = MI(bezier_C) * MI(f)*/
" sub %2,r0" "\n\t"
" sbc %3,r1" "\n\t"
" sbc %4,%0" "\n\t" /* %4:%3:%2:%9 -= MI(bezier_C) * MI(f) << 8*/
" mul %1,%6" "\n\t" /* r1:r0 = HI(bezier_C) * LO(f)*/
" sub %3,r0" "\n\t"
" sbc %4,r1" "\n\t" /* %4:%3:%2:%9 -= HI(bezier_C) * LO(f) << 16*/
/* umul16x16to16hi(f, f, t); / Range 16 bits : f = t^3 (unsigned) [17]*/
" mul %5,%7" "\n\t" /* r1:r0 = LO(f) * LO(t)*/
" mov %1,r1" "\n\t" /* store MIL(LO(f) * LO(t)) in %1, we need it for rounding*/
" clr %10" "\n\t" /* %10 = 0*/
" clr %11" "\n\t" /* %11 = 0*/
" mul %5,%8" "\n\t" /* r1:r0 = LO(f) * HI(t)*/
" add %1,r0" "\n\t" /* %1 += LO(LO(f) * HI(t))*/
" adc %10,r1" "\n\t" /* %10 = HI(LO(f) * HI(t))*/
" adc %11,%0" "\n\t" /* %11 += carry*/
" mul %6,%7" "\n\t" /* r1:r0 = HI(f) * LO(t)*/
" add %1,r0" "\n\t" /* %1 += LO(HI(f) * LO(t))*/
" adc %10,r1" "\n\t" /* %10 += HI(HI(f) * LO(t))*/
" adc %11,%0" "\n\t" /* %11 += carry*/
" mul %6,%8" "\n\t" /* r1:r0 = HI(f) * HI(t)*/
" add %10,r0" "\n\t" /* %10 += LO(HI(f) * HI(t))*/
" adc %11,r1" "\n\t" /* %11 += HI(HI(f) * HI(t))*/
" mov %5,%10" "\n\t" /* %6:%5 =*/
" mov %6,%11" "\n\t" /* f = %10:%11*/
/* umul16x24to24hi(v, f, bezier_B); / Range 22bits [29]*/
/* acc += v; */
" lds %10, bezier_B" "\n\t" /* %10 = LO(bezier_B)*/
" mul %10,%5" "\n\t" /* r1:r0 = LO(bezier_B) * LO(f)*/
" add %9,r1" "\n\t"
" adc %2,%0" "\n\t"
" adc %3,%0" "\n\t"
" adc %4,%0" "\n\t" /* %4:%3:%2:%9 += HI(LO(bezier_B) * LO(f))*/
" lds %11, bezier_B+1" "\n\t" /* %11 = MI(bezier_B)*/
" mul %11,%5" "\n\t" /* r1:r0 = MI(bezier_B) * LO(f)*/
" add %9,r0" "\n\t"
" adc %2,r1" "\n\t"
" adc %3,%0" "\n\t"
" adc %4,%0" "\n\t" /* %4:%3:%2:%9 += MI(bezier_B) * LO(f)*/
" lds %1, bezier_B+2" "\n\t" /* %1 = HI(bezier_B)*/
" mul %1,%5" "\n\t" /* r1:r0 = MI(bezier_B) * LO(f)*/
" add %2,r0" "\n\t"
" adc %3,r1" "\n\t"
" adc %4,%0" "\n\t" /* %4:%3:%2:%9 += HI(bezier_B) * LO(f) << 8*/
" mul %10,%6" "\n\t" /* r1:r0 = LO(bezier_B) * MI(f)*/
" add %9,r0" "\n\t"
" adc %2,r1" "\n\t"
" adc %3,%0" "\n\t"
" adc %4,%0" "\n\t" /* %4:%3:%2:%9 += LO(bezier_B) * MI(f)*/
" mul %11,%6" "\n\t" /* r1:r0 = MI(bezier_B) * MI(f)*/
" add %2,r0" "\n\t"
" adc %3,r1" "\n\t"
" adc %4,%0" "\n\t" /* %4:%3:%2:%9 += MI(bezier_B) * MI(f) << 8*/
" mul %1,%6" "\n\t" /* r1:r0 = HI(bezier_B) * LO(f)*/
" add %3,r0" "\n\t"
" adc %4,r1" "\n\t" /* %4:%3:%2:%9 += HI(bezier_B) * LO(f) << 16*/
/* umul16x16to16hi(f, f, t); / Range 16 bits : f = t^5 (unsigned) [17]*/
" mul %5,%7" "\n\t" /* r1:r0 = LO(f) * LO(t)*/
" mov %1,r1" "\n\t" /* store MIL(LO(f) * LO(t)) in %1, we need it for rounding*/
" clr %10" "\n\t" /* %10 = 0*/
" clr %11" "\n\t" /* %11 = 0*/
" mul %5,%8" "\n\t" /* r1:r0 = LO(f) * HI(t)*/
" add %1,r0" "\n\t" /* %1 += LO(LO(f) * HI(t))*/
" adc %10,r1" "\n\t" /* %10 = HI(LO(f) * HI(t))*/
" adc %11,%0" "\n\t" /* %11 += carry*/
" mul %6,%7" "\n\t" /* r1:r0 = HI(f) * LO(t)*/
" add %1,r0" "\n\t" /* %1 += LO(HI(f) * LO(t))*/
" adc %10,r1" "\n\t" /* %10 += HI(HI(f) * LO(t))*/
" adc %11,%0" "\n\t" /* %11 += carry*/
" mul %6,%8" "\n\t" /* r1:r0 = HI(f) * HI(t)*/
" add %10,r0" "\n\t" /* %10 += LO(HI(f) * HI(t))*/
" adc %11,r1" "\n\t" /* %11 += HI(HI(f) * HI(t))*/
" mov %5,%10" "\n\t" /* %6:%5 =*/
" mov %6,%11" "\n\t" /* f = %10:%11*/
/* umul16x24to24hi(v, f, bezier_A); / Range 21bits [29]*/
/* acc -= v; */
" lds %10, bezier_A" "\n\t" /* %10 = LO(bezier_A)*/
" mul %10,%5" "\n\t" /* r1:r0 = LO(bezier_A) * LO(f)*/
" sub %9,r1" "\n\t"
" sbc %2,%0" "\n\t"
" sbc %3,%0" "\n\t"
" sbc %4,%0" "\n\t" /* %4:%3:%2:%9 -= HI(LO(bezier_A) * LO(f))*/
" lds %11, bezier_A+1" "\n\t" /* %11 = MI(bezier_A)*/
" mul %11,%5" "\n\t" /* r1:r0 = MI(bezier_A) * LO(f)*/
" sub %9,r0" "\n\t"
" sbc %2,r1" "\n\t"
" sbc %3,%0" "\n\t"
" sbc %4,%0" "\n\t" /* %4:%3:%2:%9 -= MI(bezier_A) * LO(f)*/
" lds %1, bezier_A+2" "\n\t" /* %1 = HI(bezier_A)*/
" mul %1,%5" "\n\t" /* r1:r0 = MI(bezier_A) * LO(f)*/
" sub %2,r0" "\n\t"
" sbc %3,r1" "\n\t"
" sbc %4,%0" "\n\t" /* %4:%3:%2:%9 -= HI(bezier_A) * LO(f) << 8*/
" mul %10,%6" "\n\t" /* r1:r0 = LO(bezier_A) * MI(f)*/
" sub %9,r0" "\n\t"
" sbc %2,r1" "\n\t"
" sbc %3,%0" "\n\t"
" sbc %4,%0" "\n\t" /* %4:%3:%2:%9 -= LO(bezier_A) * MI(f)*/
" mul %11,%6" "\n\t" /* r1:r0 = MI(bezier_A) * MI(f)*/
" sub %2,r0" "\n\t"
" sbc %3,r1" "\n\t"
" sbc %4,%0" "\n\t" /* %4:%3:%2:%9 -= MI(bezier_A) * MI(f) << 8*/
" mul %1,%6" "\n\t" /* r1:r0 = HI(bezier_A) * LO(f)*/
" sub %3,r0" "\n\t"
" sbc %4,r1" "\n\t" /* %4:%3:%2:%9 -= HI(bezier_A) * LO(f) << 16*/
" jmp 2f" "\n\t" /* Done!*/
"1:" "\n\t"
/* uint24_t v; */
/* umul16x24to24hi(v, f, bezier_C); / Range 21bits [29]*/
/* acc += v; */
" lds %10, bezier_C" "\n\t" /* %10 = LO(bezier_C)*/
" mul %10,%5" "\n\t" /* r1:r0 = LO(bezier_C) * LO(f)*/
" add %9,r1" "\n\t"
" adc %2,%0" "\n\t"
" adc %3,%0" "\n\t"
" adc %4,%0" "\n\t" /* %4:%3:%2:%9 += HI(LO(bezier_C) * LO(f))*/
" lds %11, bezier_C+1" "\n\t" /* %11 = MI(bezier_C)*/
" mul %11,%5" "\n\t" /* r1:r0 = MI(bezier_C) * LO(f)*/
" add %9,r0" "\n\t"
" adc %2,r1" "\n\t"
" adc %3,%0" "\n\t"
" adc %4,%0" "\n\t" /* %4:%3:%2:%9 += MI(bezier_C) * LO(f)*/
" lds %1, bezier_C+2" "\n\t" /* %1 = HI(bezier_C)*/
" mul %1,%5" "\n\t" /* r1:r0 = MI(bezier_C) * LO(f)*/
" add %2,r0" "\n\t"
" adc %3,r1" "\n\t"
" adc %4,%0" "\n\t" /* %4:%3:%2:%9 += HI(bezier_C) * LO(f) << 8*/
" mul %10,%6" "\n\t" /* r1:r0 = LO(bezier_C) * MI(f)*/
" add %9,r0" "\n\t"
" adc %2,r1" "\n\t"
" adc %3,%0" "\n\t"
" adc %4,%0" "\n\t" /* %4:%3:%2:%9 += LO(bezier_C) * MI(f)*/
" mul %11,%6" "\n\t" /* r1:r0 = MI(bezier_C) * MI(f)*/
" add %2,r0" "\n\t"
" adc %3,r1" "\n\t"
" adc %4,%0" "\n\t" /* %4:%3:%2:%9 += MI(bezier_C) * MI(f) << 8*/
" mul %1,%6" "\n\t" /* r1:r0 = HI(bezier_C) * LO(f)*/
" add %3,r0" "\n\t"
" adc %4,r1" "\n\t" /* %4:%3:%2:%9 += HI(bezier_C) * LO(f) << 16*/
/* umul16x16to16hi(f, f, t); / Range 16 bits : f = t^3 (unsigned) [17]*/
" mul %5,%7" "\n\t" /* r1:r0 = LO(f) * LO(t)*/
" mov %1,r1" "\n\t" /* store MIL(LO(f) * LO(t)) in %1, we need it for rounding*/
" clr %10" "\n\t" /* %10 = 0*/
" clr %11" "\n\t" /* %11 = 0*/
" mul %5,%8" "\n\t" /* r1:r0 = LO(f) * HI(t)*/
" add %1,r0" "\n\t" /* %1 += LO(LO(f) * HI(t))*/
" adc %10,r1" "\n\t" /* %10 = HI(LO(f) * HI(t))*/
" adc %11,%0" "\n\t" /* %11 += carry*/
" mul %6,%7" "\n\t" /* r1:r0 = HI(f) * LO(t)*/
" add %1,r0" "\n\t" /* %1 += LO(HI(f) * LO(t))*/
" adc %10,r1" "\n\t" /* %10 += HI(HI(f) * LO(t))*/
" adc %11,%0" "\n\t" /* %11 += carry*/
" mul %6,%8" "\n\t" /* r1:r0 = HI(f) * HI(t)*/
" add %10,r0" "\n\t" /* %10 += LO(HI(f) * HI(t))*/
" adc %11,r1" "\n\t" /* %11 += HI(HI(f) * HI(t))*/
" mov %5,%10" "\n\t" /* %6:%5 =*/
" mov %6,%11" "\n\t" /* f = %10:%11*/
/* umul16x24to24hi(v, f, bezier_B); / Range 22bits [29]*/
/* acc -= v;*/
" lds %10, bezier_B" "\n\t" /* %10 = LO(bezier_B)*/
" mul %10,%5" "\n\t" /* r1:r0 = LO(bezier_B) * LO(f)*/
" sub %9,r1" "\n\t"
" sbc %2,%0" "\n\t"
" sbc %3,%0" "\n\t"
" sbc %4,%0" "\n\t" /* %4:%3:%2:%9 -= HI(LO(bezier_B) * LO(f))*/
" lds %11, bezier_B+1" "\n\t" /* %11 = MI(bezier_B)*/
" mul %11,%5" "\n\t" /* r1:r0 = MI(bezier_B) * LO(f)*/
" sub %9,r0" "\n\t"
" sbc %2,r1" "\n\t"
" sbc %3,%0" "\n\t"
" sbc %4,%0" "\n\t" /* %4:%3:%2:%9 -= MI(bezier_B) * LO(f)*/
" lds %1, bezier_B+2" "\n\t" /* %1 = HI(bezier_B)*/
" mul %1,%5" "\n\t" /* r1:r0 = MI(bezier_B) * LO(f)*/
" sub %2,r0" "\n\t"
" sbc %3,r1" "\n\t"
" sbc %4,%0" "\n\t" /* %4:%3:%2:%9 -= HI(bezier_B) * LO(f) << 8*/
" mul %10,%6" "\n\t" /* r1:r0 = LO(bezier_B) * MI(f)*/
" sub %9,r0" "\n\t"
" sbc %2,r1" "\n\t"
" sbc %3,%0" "\n\t"
" sbc %4,%0" "\n\t" /* %4:%3:%2:%9 -= LO(bezier_B) * MI(f)*/
" mul %11,%6" "\n\t" /* r1:r0 = MI(bezier_B) * MI(f)*/
" sub %2,r0" "\n\t"
" sbc %3,r1" "\n\t"
" sbc %4,%0" "\n\t" /* %4:%3:%2:%9 -= MI(bezier_B) * MI(f) << 8*/
" mul %1,%6" "\n\t" /* r1:r0 = HI(bezier_B) * LO(f)*/
" sub %3,r0" "\n\t"
" sbc %4,r1" "\n\t" /* %4:%3:%2:%9 -= HI(bezier_B) * LO(f) << 16*/
/* umul16x16to16hi(f, f, t); / Range 16 bits : f = t^5 (unsigned) [17]*/
" mul %5,%7" "\n\t" /* r1:r0 = LO(f) * LO(t)*/
" mov %1,r1" "\n\t" /* store MIL(LO(f) * LO(t)) in %1, we need it for rounding*/
" clr %10" "\n\t" /* %10 = 0*/
" clr %11" "\n\t" /* %11 = 0*/
" mul %5,%8" "\n\t" /* r1:r0 = LO(f) * HI(t)*/
" add %1,r0" "\n\t" /* %1 += LO(LO(f) * HI(t))*/
" adc %10,r1" "\n\t" /* %10 = HI(LO(f) * HI(t))*/
" adc %11,%0" "\n\t" /* %11 += carry*/
" mul %6,%7" "\n\t" /* r1:r0 = HI(f) * LO(t)*/
" add %1,r0" "\n\t" /* %1 += LO(HI(f) * LO(t))*/
" adc %10,r1" "\n\t" /* %10 += HI(HI(f) * LO(t))*/
" adc %11,%0" "\n\t" /* %11 += carry*/
" mul %6,%8" "\n\t" /* r1:r0 = HI(f) * HI(t)*/
" add %10,r0" "\n\t" /* %10 += LO(HI(f) * HI(t))*/
" adc %11,r1" "\n\t" /* %11 += HI(HI(f) * HI(t))*/
" mov %5,%10" "\n\t" /* %6:%5 =*/
" mov %6,%11" "\n\t" /* f = %10:%11*/
/* umul16x24to24hi(v, f, bezier_A); / Range 21bits [29]*/
/* acc += v; */
" lds %10, bezier_A" "\n\t" /* %10 = LO(bezier_A)*/
" mul %10,%5" "\n\t" /* r1:r0 = LO(bezier_A) * LO(f)*/
" add %9,r1" "\n\t"
" adc %2,%0" "\n\t"
" adc %3,%0" "\n\t"
" adc %4,%0" "\n\t" /* %4:%3:%2:%9 += HI(LO(bezier_A) * LO(f))*/
" lds %11, bezier_A+1" "\n\t" /* %11 = MI(bezier_A)*/
" mul %11,%5" "\n\t" /* r1:r0 = MI(bezier_A) * LO(f)*/
" add %9,r0" "\n\t"
" adc %2,r1" "\n\t"
" adc %3,%0" "\n\t"
" adc %4,%0" "\n\t" /* %4:%3:%2:%9 += MI(bezier_A) * LO(f)*/
" lds %1, bezier_A+2" "\n\t" /* %1 = HI(bezier_A)*/
" mul %1,%5" "\n\t" /* r1:r0 = MI(bezier_A) * LO(f)*/
" add %2,r0" "\n\t"
" adc %3,r1" "\n\t"
" adc %4,%0" "\n\t" /* %4:%3:%2:%9 += HI(bezier_A) * LO(f) << 8*/
" mul %10,%6" "\n\t" /* r1:r0 = LO(bezier_A) * MI(f)*/
" add %9,r0" "\n\t"
" adc %2,r1" "\n\t"
" adc %3,%0" "\n\t"
" adc %4,%0" "\n\t" /* %4:%3:%2:%9 += LO(bezier_A) * MI(f)*/
" mul %11,%6" "\n\t" /* r1:r0 = MI(bezier_A) * MI(f)*/
" add %2,r0" "\n\t"
" adc %3,r1" "\n\t"
" adc %4,%0" "\n\t" /* %4:%3:%2:%9 += MI(bezier_A) * MI(f) << 8*/
" mul %1,%6" "\n\t" /* r1:r0 = HI(bezier_A) * LO(f)*/
" add %3,r0" "\n\t"
" adc %4,r1" "\n\t" /* %4:%3:%2:%9 += HI(bezier_A) * LO(f) << 16*/
"2:" "\n\t"
" clr __zero_reg__" /* C runtime expects r1 = __zero_reg__ = 0 */
: "+r"(r0),
"+r"(r1),
"+r"(r2),
"+r"(r3),
"+r"(r4),
"+r"(r5),
"+r"(r6),
"+r"(r7),
"+r"(r8),
"+r"(r9),
"+r"(r10),
"+r"(r11)
:
:"cc","r0","r1"
);
return (r2 | (uint16_t(r3) << 8)) | (uint32_t(r4) << 16);
}
#else
// For all the other 32bit CPUs
FORCE_INLINE void Stepper::_calc_bezier_curve_coeffs(const int32_t v0, const int32_t v1, const uint32_t av) {
// Calculate the Bézier coefficients
bezier_A = 768 * (v1 - v0);
bezier_B = 1920 * (v0 - v1);
bezier_C = 1280 * (v1 - v0);
bezier_F = 128 * v0;
bezier_AV = 0xFFFFFFFF / interval;
bezier_AV = av;
}
FORCE_INLINE int32_t Stepper::_eval_bezier_curve(const uint32_t curr_step) {
#if defined(__ARM__) || defined(__thumb__)
// For ARM CORTEX M3/M4 CPUs, we have the optimized assembler version, that takes 43 cycles to execute
// For ARM Cortex M3/M4 CPUs, we have the optimized assembler version, that takes 43 cycles to execute
register uint32_t flo = 0;
register uint32_t fhi = bezier_AV * curr_step;
register uint32_t t = fhi;
@ -493,7 +1101,7 @@ void Stepper::set_directions() {
#else
// For non ARM targets, we provide a fallback implementation. Really doubt it
// will be useful, unless the processor is extremely fast.
// will be useful, unless the processor is fast and 32bit
uint32_t t = bezier_AV * curr_step; // t: Range 0 - 1^32 = 32 bits
uint64_t f = t;
@ -514,7 +1122,7 @@ void Stepper::set_directions() {
#endif
}
#endif
#endif // BEZIER_JERK_CONTROL
/**
@ -660,7 +1268,7 @@ void Stepper::isr() {
#if ENABLED(BEZIER_JERK_CONTROL)
// Initialize the Bézier speed curve
_calc_bezier_curve_coeffs(current_block->initial_rate, current_block->cruise_rate, current_block->acceleration_time);
_calc_bezier_curve_coeffs(current_block->initial_rate, current_block->cruise_rate, current_block->acceleration_time_inverse);
// We have not started the 2nd half of the trapezoid
bezier_2nd_half = false;
@ -953,7 +1561,7 @@ void Stepper::isr() {
if (!bezier_2nd_half) {
// Initialize the Bézier speed curve
_calc_bezier_curve_coeffs(current_block->cruise_rate, current_block->final_rate, current_block->deceleration_time);
_calc_bezier_curve_coeffs(current_block->cruise_rate, current_block->final_rate, current_block->deceleration_time_inverse);
bezier_2nd_half = true;
}

9
Marlin/src/module/stepper.h
View File

@ -100,9 +100,12 @@ class Stepper {
#if ENABLED(BEZIER_JERK_CONTROL)
static int32_t bezier_A, // A coefficient in Bézier speed curve
bezier_B, // B coefficient in Bézier speed curve
bezier_C, // C coefficient in Bézier speed curve
bezier_F; // F coefficient in Bézier speed curve
bezier_C; // C coefficient in Bézier speed curve
static uint32_t bezier_F; // F coefficient in Bézier speed curve
static uint32_t bezier_AV; // AV coefficient in Bézier speed curve
#ifdef __AVR__
static bool A_negative; // If A coefficient was negative
#endif
static bool bezier_2nd_half; // If Bézier curve has been initialized or not
#endif
@ -361,7 +364,7 @@ class Stepper {
}
#if ENABLED(BEZIER_JERK_CONTROL)
static void _calc_bezier_curve_coeffs(const int32_t v0, const int32_t v1, const uint32_t steps);
static void _calc_bezier_curve_coeffs(const int32_t v0, const int32_t v1, const uint32_t av);
static int32_t _eval_bezier_curve(const uint32_t curr_step);
#endif

Write Preview
Loading…
Cancel
Save