andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Include requirements in "Implemented Codes"

pull/1/head
Scott Lahteine 8 years ago
parent
041d127cd3
commit
570676d265
1 changed files with 108 additions and 109 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 217
      Marlin/Marlin_main.cpp

217
Marlin/Marlin_main.cpp
View File

@ -128,124 +128,123 @@
* M1 - Same as M0 * M1 - Same as M0
* M17 - Enable/Power all stepper motors * M17 - Enable/Power all stepper motors
* M18 - Disable all stepper motors; same as M84 * M18 - Disable all stepper motors; same as M84
* M20 - List SD card * M20 - List SD card. (Requires SDSUPPORT)
* M21 - Init SD card * M21 - Init SD card. (Requires SDSUPPORT)
* M22 - Release SD card * M22 - Release SD card. (Requires SDSUPPORT)
* M23 - Select SD file (M23 filename.g) * M23 - Select SD file: "M23 /path/file.gco". (Requires SDSUPPORT)
* M24 - Start/resume SD print * M24 - Start/resume SD print. (Requires SDSUPPORT)
* M25 - Pause SD print * M25 - Pause SD print. (Requires SDSUPPORT)
* M26 - Set SD position in bytes (M26 S12345) * M26 - Set SD position in bytes: "M26 S12345". (Requires SDSUPPORT)
* M27 - Report SD print status * M27 - Report SD print status. (Requires SDSUPPORT)
* M28 - Start SD write (M28 filename.g) * M28 - Start SD write: "M28 /path/file.gco". (Requires SDSUPPORT)
* M29 - Stop SD write * M29 - Stop SD write. (Requires SDSUPPORT)
* M30 - Delete file from SD (M30 filename.g) * M30 - Delete file from SD: "M30 /path/file.gco"
* M31 - Output time since last M109 or SD card start to serial * M31 - Report time since last M109 or SD card start to serial.
* M32 - Select file and start SD print (Can be used _while_ printing from SD card files): * M32 - Select file and start SD print: "M32 [S<bytepos>] !/path/file.gco#". (Requires SDSUPPORT)
* syntax "M32 /path/filename#", or "M32 S<startpos bytes> !filename#" * Use P to run other files as sub-programs: "M32 P !filename#"
* Call gcode file : "M32 P !filename#" and return to caller file after finishing (similar to #include).
* The '#' is necessary when calling from within sd files, as it stops buffer prereading * The '#' is necessary when calling from within sd files, as it stops buffer prereading
* M33 - Get the longname version of a path * M33 - Get the longname version of a path. (Requires LONG_FILENAME_HOST_SUPPORT)
* M42 - Change pin status via gcode Use M42 Px Sy to set pin x to value y, when omitting Px the onboard led will be used. * M42 - Change pin status via gcode: M42 P<pin> S<value>. LED pin assumed if P is omitted.
* M48 - Measure Z_Probe repeatability. M48 [P # of points] [X position] [Y position] [V_erboseness #] [E_ngage Probe] [L # of legs of travel] * M48 - Measure Z Probe repeatability: M48 P<points> X<pos> Y<pos> V<level> E<engage> L<legs>. (Requires Z_MIN_PROBE_REPEATABILITY_TEST)
* M75 - Start the print job timer * M75 - Start the print job timer.
* M76 - Pause the print job timer * M76 - Pause the print job timer.
* M77 - Stop the print job timer * M77 - Stop the print job timer.
* M78 - Show statistical information about the print jobs * M78 - Show statistical information about the print jobs. (Requires PRINTCOUNTER)
* M80 - Turn on Power Supply * M80 - Turn on Power Supply. (Requires POWER_SUPPLY)
* M81 - Turn off Power Supply * M81 - Turn off Power Supply. (Requires POWER_SUPPLY)
* M82 - Set E codes absolute (default) * M82 - Set E codes absolute (default).
* M83 - Set E codes relative while in Absolute Coordinates (G90) mode * M83 - Set E codes relative while in Absolute (G90) mode.
* M84 - Disable steppers until next move, * M84 - Disable steppers until next move, or use S<seconds> to specify an idle
* or use S<seconds> to specify an inactivity timeout, after which the steppers will be disabled. S0 to disable the timeout. * duration after which steppers should turn off. S0 disables the timeout.
* M85 - Set inactivity shutdown timer with parameter S<seconds>. To disable set zero (default) * M85 - Set inactivity shutdown timer with parameter S<seconds>. To disable set zero (default)
* M92 - Set planner.axis_steps_per_mm - same syntax as G92 * M92 - Set planner.axis_steps_per_mm for one or more axes.
* M104 - Set extruder target temp * M104 - Set extruder target temp.
* M105 - Read current temp * M105 - Report current temperatures.
* M106 - Fan on * M106 - Fan on.
* M107 - Fan off * M107 - Fan off.
* M108 - Stop the waiting for heaters in M109, M190, M303. Does not affect the target temperature. * M108 - Break out of heating loops (M109, M190, M303). With no controller, breaks out of M0/M1. (Requires EMERGENCY_PARSER)
* M109 - Sxxx Wait for extruder current temp to reach target temp. Waits only when heating * M109 - Sxxx Wait for extruder current temp to reach target temp. Waits only when heating
* Rxxx Wait for extruder current temp to reach target temp. Waits when heating and cooling * Rxxx Wait for extruder current temp to reach target temp. Waits when heating and cooling
* IF AUTOTEMP is enabled, S<mintemp> B<maxtemp> F<factor>. Exit autotemp by any M109 without F * IF AUTOTEMP is enabled, S<mintemp> B<maxtemp> F<factor>. Exit autotemp by any M109 without F
* M110 - Set the current line number * M110 - Set the current line number. (Used by host printing)
* M111 - Set debug flags with S<mask>. See flag bits defined in enum.h. * M111 - Set debug flags: "M111 S<flagbits>". See flag bits defined in enum.h.
* M112 - Emergency stop * M112 - Emergency stop.
* M113 - Get or set the timeout interval for Host Keepalive "busy" messages * M113 - Get or set the timeout interval for Host Keepalive "busy" messages. (Requires HOST_KEEPALIVE_FEATURE)
* M114 - Output current position to serial port * M114 - Report current position.
* M115 - Capabilities string * M115 - Report capabilities.
* M117 - Display a message on the controller screen * M117 - Display a message on the controller screen. (Requires an LCD)
* M119 - Output Endstop status to serial port * M119 - Report endstops status.
* M120 - Enable endstop detection * M120 - Enable endstops detection.
* M121 - Disable endstop detection * M121 - Disable endstops detection.
* M126 - Solenoid Air Valve Open (BariCUDA support by jmil) * M126 - Solenoid Air Valve Open. (Requires BARICUDA)
* M127 - Solenoid Air Valve Closed (BariCUDA vent to atmospheric pressure by jmil) * M127 - Solenoid Air Valve Closed. (Requires BARICUDA)
* M128 - EtoP Open (BariCUDA EtoP = electricity to air pressure transducer by jmil) * M128 - EtoP Open. (Requires BARICUDA)
* M129 - EtoP Closed (BariCUDA EtoP = electricity to air pressure transducer by jmil) * M129 - EtoP Closed. (Requires BARICUDA)
* M140 - Set bed target temp * M140 - Set bed target temp. S<temp>
* M145 - Set the heatup state H<hotend> B<bed> F<fan speed> for S<material> (0=PLA, 1=ABS) * M145 - Set heatup values for materials on the LCD. H<hotend> B<bed> F<fan speed> for S<material> (0=PLA, 1=ABS)
* M149 - Set temperature units * M149 - Set temperature units. (Requires TEMPERATURE_UNITS_SUPPORT)
* M150 - Set BlinkM Color Output R: Red<0-255> U(!): Green<0-255> B: Blue<0-255> over i2c, G for green does not work. * M150 - Set BlinkM Color R<red> U<green> B<blue>. Values 0-255. (Requires BLINKM)
* M163 - Set a single proportion for a mixing extruder. Requires MIXING_EXTRUDER. * M163 - Set a single proportion for a mixing extruder. (Requires MIXING_EXTRUDER)
* M164 - Save the mix as a virtual extruder. Requires MIXING_EXTRUDER and MIXING_VIRTUAL_TOOLS. * M164 - Save the mix as a virtual extruder. (Requires MIXING_EXTRUDER and MIXING_VIRTUAL_TOOLS)
* M165 - Set the proportions for a mixing extruder. Use parameters ABCDHI to set the mixing factors. Requires MIXING_EXTRUDER. * M165 - Set the proportions for a mixing extruder. Use parameters ABCDHI to set the mixing factors. (Requires MIXING_EXTRUDER)
* M190 - Sxxx Wait for bed current temp to reach target temp. Waits only when heating * M190 - Sxxx Wait for bed current temp to reach target temp. ** Waits only when heating! **
* Rxxx Wait for bed current temp to reach target temp. Waits when heating and cooling * Rxxx Wait for bed current temp to reach target temp. ** Waits for heating or cooling. **
* M200 - Set filament diameter, D<diameter>, setting E axis units to cubic. (Use S0 to revert to linear units.) * M200 - Set filament diameter, D<diameter>, setting E axis units to cubic. (Use S0 to revert to linear units.)
* M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000) * M201 - Set max acceleration in units/s^2 for print moves: "M201 X<accel> Y<accel> Z<accel> E<accel>"
* M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in Marlin!! * M202 - Set max acceleration in units/s^2 for travel moves: "M202 X<accel> Y<accel> Z<accel> E<accel>" ** UNUSED IN MARLIN! **
* M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in units/sec * M203 - Set maximum feedrate: "M203 X<fr> Y<fr> Z<fr> E<fr>" in units/sec.
* M204 - Set default acceleration: P for Printing moves, R for Retract only (no X, Y, Z) moves and T for Travel (non printing) moves (ex. M204 P800 T3000 R9000) in units/sec^2 * M204 - Set default acceleration in units/sec^2: P<printing> R<extruder_only> T<travel>
* M205 - Set advanced settings. Current units apply: * M205 - Set advanced settings. Current units apply:
S<print> T<travel> minimum speeds S<print> T<travel> minimum speeds
B<minimum segment time> B<minimum segment time>
X<max xy jerk>, Z<max Z jerk>, E<max E jerk> X<max xy jerk>, Z<max Z jerk>, E<max E jerk>
* M206 - Set additional homing offset * M206 - Set additional homing offset.
* M207 - Set Retract Length: S<length>, Feedrate: F<units/min>, and Z lift: Z<distance> * M207 - Set Retract Length: S<length>, Feedrate: F<units/min>, and Z lift: Z<distance>. (Requires FWRETRACT)
* M208 - Set Recover (unretract) Additional (!) Length: S<length> and Feedrate: F<units/min> * M208 - Set Recover (unretract) Additional (!) Length: S<length> and Feedrate: F<units/min>. (Requires FWRETRACT)
* M209 - Turn Automatic Retract Detection on/off: S<bool> (For slicers that don't support G10/11). * M209 - Turn Automatic Retract Detection on/off: S<0|1> (For slicers that don't support G10/11). (Requires FWRETRACT)
Every normal extrude-only move will be classified as retract depending on the direction. Every normal extrude-only move will be classified as retract depending on the direction.
* M211 - Enable, Disable, and/or Report software endstops: [S<bool>] * M211 - Enable, Disable, and/or Report software endstops: S<0|1>
* M218 - Set a tool offset: T<index> X<offset> Y<offset> * M218 - Set a tool offset: "M218 T<index> X<offset> Y<offset>". (Requires 2 or more extruders)
* M220 - Set Feedrate Percentage: S<percent> ("FR" on your LCD) * M220 - Set Feedrate Percentage: "M220 S<percent>" (i.e., "FR" on the LCD)
* M221 - Set Flow Percentage: S<percent> * M221 - Set Flow Percentage: "M221 S<percent>"
* M226 - Wait until the specified pin reaches the state required: P<pin number> S<pin state> * M226 - Wait until a pin is in a given state: "M226 P<pin> S<state>"
* M240 - Trigger a camera to take a photograph * M240 - Trigger a camera to take a photograph. (Requires CHDK or PHOTOGRAPH_PIN)
* M250 - Set LCD contrast C<contrast value> (value 0..63) * M250 - Set LCD contrast: "M250 C<contrast>" (0-63). (Requires LCD support)
* M280 - Set servo position absolute. P: servo index, S: angle or microseconds * M280 - Set servo position absolute: "M280 P<index> S<angle|µs>". (Requires servos)
* M300 - Play beep sound S<frequency Hz> P<duration ms> * M300 - Play beep sound S<frequency Hz> P<duration ms>
* M301 - Set PID parameters P I and D * M301 - Set PID parameters P I and D. (Requires PIDTEMP)
* M302 - Allow cold extrudes, or set the minimum extrude S<temperature>. * M302 - Allow cold extrudes, or set the minimum extrude S<temperature>. (Requires PREVENT_COLD_EXTRUSION)
* M303 - PID relay autotune S<temperature> sets the target temperature. (default target temperature = 150C) * M303 - PID relay autotune S<temperature> sets the target temperature. Default 150C. (Requires PIDTEMP)
* M304 - Set bed PID parameters P I and D * M304 - Set bed PID parameters P I and D. (Requires PIDTEMPBED)
* M380 - Activate solenoid on active extruder * M380 - Activate solenoid on active extruder. (Requires EXT_SOLENOID)
* M381 - Disable all solenoids * M381 - Disable all solenoids. (Requires EXT_SOLENOID)
* M400 - Finish all moves * M400 - Finish all moves.
* M401 - Lower Z probe if present * M401 - Lower Z probe. (Requires a probe)
* M402 - Raise Z probe if present * M402 - Raise Z probe. (Requires a probe)
* M404 - Display or set the Nominal Filament Width: [ N<diameter> ] * M404 - Display or set the Nominal Filament Width: "W<diameter>". (Requires FILAMENT_WIDTH_SENSOR)
* M405 - Enable Filament Sensor extrusion control. Optional delay between sensor and extruder: D<cm> * M405 - Enable Filament Sensor flow control. "M405 D<delay_cm>". (Requires FILAMENT_WIDTH_SENSOR)
* M406 - Disable Filament Sensor extrusion control * M406 - Disable Filament Sensor flow control. (Requires FILAMENT_WIDTH_SENSOR)
* M407 - Display measured filament diameter in millimeters * M407 - Display measured filament diameter in millimeters. (Requires FILAMENT_WIDTH_SENSOR)
* M410 - Quickstop. Abort all the planned moves * M410 - Quickstop. Abort all planned moves.
* M420 - Enable/Disable Mesh Leveling (with current values) S1=enable S0=disable * M420 - Enable/Disable Mesh Leveling (with current values) S1=enable S0=disable (Requires MESH_BED_LEVELING)
* M421 - Set a single Z coordinate in the Mesh Leveling grid. X<units> Y<units> Z<units> * M421 - Set a single Z coordinate in the Mesh Leveling grid. X<units> Y<units> Z<units> (Requires MESH_BED_LEVELING)
* M428 - Set the home_offset logically based on the current_position * M428 - Set the home_offset based on the current_position. Nearest edge applies.
* M500 - Store parameters in EEPROM * M500 - Store parameters in EEPROM. (Requires EEPROM_SETTINGS)
* M501 - Read parameters from EEPROM (if you need reset them after you changed them temporarily). * M501 - Restore parameters from EEPROM. (Requires EEPROM_SETTINGS)
* M502 - Revert to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. * M502 - Revert to the default "factory settings". ** Does not write them to EEPROM! **
* M503 - Print the current settings (from memory not from EEPROM). Use S0 to leave off headings. * M503 - Print the current settings (in memory): "M503 S<verbose>". S0 specifies compact output.
* M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) * M540 - Enable/disable SD card abort on endstop hit: "M540 S<state>". (Requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
* M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal] * M600 - Pause for filament change: "M600 X<pos> Y<pos> Z<raise> E<first_retract> L<later_retract>". (Requires FILAMENT_CHANGE_FEATURE)
* M665 - Set delta configurations: L<diagonal rod> R<delta radius> S<segments/s> * M665 - Set delta configurations: "M665 L<diagonal rod> R<delta radius> S<segments/s>" (Requires DELTA)
* M666 - Set delta endstop adjustment * M666 - Set delta endstop adjustment. (Requires DELTA)
* M605 - Set dual x-carriage movement mode: S<mode> [ X<duplication x-offset> R<duplication temp offset> ] * M605 - Set dual x-carriage movement mode: "M605 S<mode> [X<x_offset>] [R<temp_offset>]". (Requires DUAL_X_CARRIAGE)
* M851 - Set Z probe's Z offset in current units. (Negative values apply to probes that extend below the nozzle.) * M851 - Set Z probe's Z offset in current units. (Negative = below the nozzle.)
* M907 - Set digital trimpot motor current using axis codes. * M907 - Set digital trimpot motor current using axis codes. (Requires a board with digital trimpots)
* M908 - Control digital trimpot directly. * M908 - Control digital trimpot directly. (Requires DAC_STEPPER_CURRENT or DIGIPOTSS_PIN)
* M909 - DAC_STEPPER_CURRENT: Print digipot/DAC current value * M909 - Print digipot/DAC current value. (Requires DAC_STEPPER_CURRENT)
* M910 - DAC_STEPPER_CURRENT: Commit digipot/DAC value to external EEPROM via I2C * M910 - Commit digipot/DAC value to external EEPROM via I2C. (Requires DAC_STEPPER_CURRENT)
* M350 - Set microstepping mode. * M350 - Set microstepping mode. (Requires digital microstepping pins.)
* M351 - Toggle MS1 MS2 pins directly. * M351 - Toggle MS1 MS2 pins directly. (Requires digital microstepping pins.)
* *
* ************ SCARA Specific - This can change to suit future G-code regulations * ************ SCARA Specific - This can change to suit future G-code regulations
* M360 - SCARA calibration: Move to cal-position ThetaA (0 deg calibration) * M360 - SCARA calibration: Move to cal-position ThetaA (0 deg calibration)
@ -256,13 +255,13 @@
* ************* SCARA End *************** * ************* SCARA End ***************
* *
* ************ Custom codes - This can change to suit future G-code regulations * ************ Custom codes - This can change to suit future G-code regulations
* M100 - Watch Free Memory (For Debugging Only) * M100 - Watch Free Memory (For Debugging). (Requires M100_FREE_MEMORY_WATCHER)
* M928 - Start SD logging (M928 filename.g) - ended by M29 * M928 - Start SD logging: "M928 filename.gco". Stop with M29. (Requires SDSUPPORT)
* M999 - Restart after being stopped by error * M999 - Restart after being stopped by error
* *
* "T" Codes * "T" Codes
* *
* T0-T3 - Select a tool by index (usually an extruder) [ F<units/min> ] * T0-T3 - Select an extruder (tool) by index: "T<n> F<units/min>"
* *
*/ */

Write Preview
Loading…
Cancel
Save