Merge pull request #6066 from thinkyhead/rc_felix_fix

Update Felix config for UBL

Marlin/example_configurations/Felix/Configuration.h

@@ -824,8 +824,43 @@
   #define ABL_PROBE_PT_3_X 170
   #define ABL_PROBE_PT_3_Y 20
 
+#elif ENABLED(MESH_BED_LEVELING)
+
+  //===========================================================================
+  //=================================== Mesh ==================================
+  //===========================================================================
+
+  #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
+  #define MESH_INSET 10          // Mesh inset margin on print area
+  #define MESH_NUM_X_POINTS 3    // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_Y_POINTS 3
+
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
+
+  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.
+
+  #if ENABLED(MANUAL_BED_LEVELING)
+    #define MBL_Z_STEP 0.025     // Step size while manually probing Z axis.
   #endif
 
+#elif ENABLED(AUTO_BED_LEVELING_UBL)
+
+  //===========================================================================
+  //========================= Unified Bed Leveling ============================
+  //===========================================================================
+
+  #define UBL_MESH_INSET 1          // Mesh inset margin on print area
+  #define UBL_MESH_NUM_X_POINTS 10  // Don't use more than 15 points per axis, implementation limited.
+  #define UBL_MESH_NUM_Y_POINTS 10
+  #define UBL_PROBE_PT_1_X 39       // These set the probe locations for when UBL does a 3-Point leveling
+  #define UBL_PROBE_PT_1_Y 180      // of the mesh.
+  #define UBL_PROBE_PT_2_X 39
+  #define UBL_PROBE_PT_2_Y 20
+  #define UBL_PROBE_PT_3_X 180
+  #define UBL_PROBE_PT_3_Y 20
+
+#endif  // BED_LEVELING
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.