Browse Source

Support SMART RAMPS 1.4 with Mega2560 (#21059)

vanilla_fb_2.0.x
kpishere 4 years ago
committed by Scott Lahteine
parent
commit
54f401506b
  1. 17
      Marlin/src/pins/sam/pins_RAMPS_SMART.h

17
Marlin/src/pins/sam/pins_RAMPS_SMART.h

@ -60,8 +60,8 @@
* (Search the web for "Arduino DUE Board Pinout" to see the correct header.) * (Search the web for "Arduino DUE Board Pinout" to see the correct header.)
*/ */
#if NOT_TARGET(__SAM3X8E__) #if NOT_TARGET(__SAM3X8E__, __AVR_ATmega2560__)
#error "Oops! Select 'Arduino Due' in 'Tools > Board.'" #error "Oops! Select 'Arduino Due' or 'Mega 2560' in 'Tools > Board.'"
#endif #endif
#define BOARD_INFO_NAME "RAMPS-SMART" #define BOARD_INFO_NAME "RAMPS-SMART"
@ -72,6 +72,18 @@
#define I2C_EEPROM #define I2C_EEPROM
#define MARLIN_EEPROM_SIZE 0x1000 #define MARLIN_EEPROM_SIZE 0x1000
#define SDA_PIN 20
#define SCL_PIN 21
// See EEPROM device datasheet for the following values. These are for 24xx256
#define EEPROM_SERIAL_ADDR 0x50 // 7 bit i2c address (without R/W bit)
#define EEPROM_PAGE_SIZE 64 // page write buffer size
#define EEPROM_PAGE_WRITE_TIME 7 // page write time in milliseconds (docs say 5ms but that is too short)
#define TWI_CLOCK_FREQ 400000
#define EEPROM_ADDRSZ_BYTES TWI_MMR_IADRSZ_2_BYTE // TWI_MMR_IADRSZ_1_BYTE for 1 byte, or TWI_MMR_IADRSZ_2_BYTE for 2 byte
#define EEPROM_AVAILABLE EEPROM_I2C
#define RESET_PIN 42 // Resets the board if the jumper is attached #define RESET_PIN 42 // Resets the board if the jumper is attached
// //
@ -97,6 +109,7 @@
// //
// LCD / Controller // LCD / Controller
// //
// Support for AZSMZ 12864 LCD with SD Card 3D printer smart controller control panel // Support for AZSMZ 12864 LCD with SD Card 3D printer smart controller control panel
#if ENABLED(AZSMZ_12864) #if ENABLED(AZSMZ_12864)
#define BEEPER_PIN 66 // Smart RAMPS 1.42 pinout diagram on RepRap WIKI erroneously says this should be pin 65 #define BEEPER_PIN 66 // Smart RAMPS 1.42 pinout diagram on RepRap WIKI erroneously says this should be pin 65

Loading…
Cancel
Save